I got my Fuze a couple of weeks ago but the glossy black panel on the back is already showing scratches. I would like to know if anybody knows a place where they sell replacements or if they make a rubberized one or not. I just ordered a case so it won't be much of an issue but I'm sure I'll need to replace it eventually. Any info on this would be greatly appreciated.
To anyone reading this thread and wondering, see this thread:
http://forum.xda-developers.com/showthread.php?t=444619
Yea I saw that but does that rubberized one fit this phone because it doesn't look like it from the picture and the clear plastic part where the camera/LED is located on the phone seems to small to fit over both on the Fuze. Just want confirmation that this cover fits on the Fuze. Thanks for the input.
MAN i really hope they come out with some aftermarket understated back covers. If the sprint version didnt have the ugly chrome trim id be all over it.
Couldn't agree more. I'd buy a "Tilt" like back cover for the AT&T Fuze in a heartbeat.
thedogger said:
Couldn't agree more. I'd buy a "Tilt" like back cover for the AT&T Fuze in a heartbeat.
Click to expand...
Click to collapse
Was Fuze's back some sort cheesy homage to the Touch Diamond?
dpittman said:
Was Fuze's back some sort cheesy homage to the Touch Diamond?
Click to expand...
Click to collapse
http://www.wmexperts.com/articleimages/2008/11/fuze/att-fuze-13.jpg
Fingerprint magnet & slides all over the place if you set it down on something & try to use it.
Related
anyone knows where i can order one?
Are these what you are looking for?
http://www.thepocketsolution.com/PSI-42272.html
If so, now you know where to get them.
pls try carrymobile tytn II case
cool...pls try carrymobile tytn II / at&t 8925 from http://www.carrymobile.com/scripts/main/viewitem.php?itemid=O24550LCBSPBK&pdaid=4550
>==
Personally I like the Invisible Shield Product. One warning: you do need to give it a couple of months for the finish to wear to a comfortable sheen.
ShieldZone's Full Body Skin
Tavocr said:
http://www.thepocketsolution.com/PSI-42272.html
If so, now you know where to get them.
Click to expand...
Click to collapse
$25 for what amounts to custom cut Scotch tape = RIPOFF.
I paid about that much for a Boxwave Active Case (plastic hardcase with locking belt clip) for my Hermes. Unfortunately they are not yet available for the Kaiser.
Tavocr said:
http://www.thepocketsolution.com/PSI-42272.html
If so, now you know where to get them.
Click to expand...
Click to collapse
no i'm looking for a replacement housing, (just the front cover)
elroy944 said:
no i'm looking for a replacement housing, (just the front cover)
Click to expand...
Click to collapse
Pricey, but here it is:
http://cnn.cn/shop/8925-tilt-kaiser-c-277_448.html
URPREY said:
Pricey, but here it is:
http://cnn.cn/shop/8925-tilt-kaiser-c-277_448.html
Click to expand...
Click to collapse
i found on ebay one for 60 dollars, but i think it can cheaper... anyone knows a good site of place?
I just bought this hard plastic case, still allows me to slide the keyboard and tilt the screen and access all the buttons.
I picked the smoke grey color, the phone does not even look like it has a cover on, looks great and still acessible to all buttons.
http://www.boxwave.com/products/activecase/active-case-at_t-tilt_2906.htm
Does anyone know if HTC will ship the ratail non-branded Touch PRO version with a case?
I only want to get a simple slip-in case that protects the PRO when in a pocket or anything. For usage I would just take it out of the case.
Jorlin said:
Does anyone know if HTC will ship the ratail non-branded Touch PRO version with a case?
I only want to get a simple slip-in case that protects the PRO when in a pocket or anything. For usage I would just take it out of the case.
Click to expand...
Click to collapse
It is going to be shipped with a case but probably not what you're expecting.
cliffgardner said:
It is going to be shipped with a case but probably not what you're expecting.
Click to expand...
Click to collapse
As long it is some case that allows you to put it in and out I am fine - at least it is a case...
Case
It's not really a case - more like a slip. You can't attach it to your belt.
I'm off to buy a decent case for it.
Yep, it's literally just a leather "tube" that you slide the Raphael into, with a ribbon stitched inside to stop it sliding out of one end. Snug fit though, so it wont be sliding out too easily anyway. Pics (taken with a Diamond) attached...
sub69 said:
Yep, it's literally just a leather "tube" that you slide the Raphael into, with a ribbon stitched inside to stop it sliding out of one end. Snug fit though, so it wont be sliding out too easily anyway. Pics (taken with a Diamond) attached...
Click to expand...
Click to collapse
So this comes with the retail HTC Touch Pro right? That's enouch for me
sub69 said:
Yep, it's literally just a leather "tube" that you slide the Raphael into, with a ribbon stitched inside to stop it sliding out of one end. Snug fit though, so it wont be sliding out too easily anyway. Pics (taken with a Diamond) attached...
Click to expand...
Click to collapse
Hope you don't mind, I put your images on imageshack so they are a little easier for people to view on the forum...
Jorlin said:
So this comes with the retail HTC Touch Pro right? That's enouch for me
Click to expand...
Click to collapse
Yep, that's what came with my UK Raphael.
And thanks grahamrb, should have done that myself!
Is it leather? I hear is more like soft plastic or something...
Seems like leather to me. It's well made and protects the phone well but you just cannot connect it to your belt.
From the pics it's seems a great case.
I hate those cases that had a belt clip, for example for the Prophet, yuck!!
I hate them belt clips to and besides that the risk of losing your phone get's even bigger.
Always in my pocket and guard it with my life
onesolo said:
From the pics it's seems a great case.
I hate those cases that had a belt clip, for example for the Prophet, yuck!!
Click to expand...
Click to collapse
I like the case very much, it keeps the overall size of Phone+Case down as much as conceivably possible. I don't think I need to purchase a new case, unless of course someone teases me with a better one!
Here is a link to a Belt case that HTC should be producing:
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=169487
http://i.expansys.com/i/b/b169487.jpg (Picture only)
I would love to see these cases for the Diamond/Pro:
http://www.beyzacases.com/cat-apple-iphone-3g-cases-roadline---slim-cases.cfm
In custom colours like VAJA offers them...
Anyone know of any other suitable cases that mount on a belt horizontally?
I have the case that came with the Touch Pro and, all in all, it's good quality except it's just a slip and is a bit tight, i.e. can't get the phone out quickly.
There was a leather version of the official case advertised which looked better than the soft version (which seems to open around the edges for my liking and that material doesn't offer enough stiff protection), but that seems to have vanished.
kempas said:
Anyone know of any other suitable cases that mount on a belt horizontally?
I have the case that came with the Touch Pro and, all in all, it's good quality except it's just a slip and is a bit tight, i.e. can't get the phone out quickly.
There was a leather version of the official case advertised which looked better than the soft version (which seems to open around the edges for my liking and that material doesn't offer enough stiff protection), but that seems to have vanished.
Click to expand...
Click to collapse
Charusen said:
Here is a link to a Belt case that HTC should be producing:
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=169487
http://i.expansys.com/i/b/b169487.jpg (Picture only)
Click to expand...
Click to collapse
The above links show the Original HTC cases. Is that what you are after or is that the soft material you mentioned?
PDair Leather Cases
Found this on PDair's website. Thought you guys might be interested if you're looking for a case for your touch pro (=
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000341&products_id=8164
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000341&products_id=8163
Charusen said:
The above links show the Original HTC cases. Is that what you are after or is that the soft material you mentioned?
Click to expand...
Click to collapse
Yep, that's the soft material one which doesn't look like it gives much protection, also seems quite open at the bottom, probably only an elastic strip in the middle.
There was a leather case being advertised but that seems to have gone now.
purplepig said:
Found this on PDair's website. Thought you guys might be interested if you're looking for a case for your touch pro (=
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000341&products_id=8164
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000341&products_id=8163
Click to expand...
Click to collapse
These are very nice! I'm a bit skeptical though about the magnetised studs to close it, could they cause problems with the memory (internal or cards) due to the magnetic field? Anybody have experience with these either way?
Check out the case I just picked up from the AT&T store. The slider works PERFECT!
Is this the Body Glove brand case?
Is an AT&T brand for 4600. Was VERY surprised to see this there.
Nice! I'm gonna have to check that out at the store. I'm guessing that cost around $30?
Yea, something like that. I think it was $28+ tax.
Interesting. This is the one I was talking about. It looks very similar.
http://www.bodyglove.com/products_detail.php?product_id=25864
Here is the package.
I had a problem with the case at first as it had a small piece of plastic in top left corner that was just big enough to push the start key on the screen if you can beleive that. With that, I was NOT able to do anything and at first thought it was my device. I took the case off, fuze was then working and noticed the corner piece. Shaved it down real fast and everything was fine. It has a nice rubber feeling. Stays put if on your seat unlike the original fuze back which we all should know if you hit your breaks and the fuze is on your seat, well, its now on your passenger floor! Also feels real nice in your hand. Overall, good buy!
Nice case...and interesting...do you guy know where i can get it in Asia??
Looks like it adds a little more to the thickness... but looks nice!
Very nice...does the keyboard slide open or do you have to open the case first?
Wow. Holy crap. It looks horrible to me >.>
Na,
its perfect. The original case is whats horrible.
RayB said:
The original case is whats horrible.
Click to expand...
Click to collapse
The original case? I don't think a case came with the fuze? lol? I'm waiting for Seidio to come up with a case for the fuze. I'd definitely want that.
Keyboard slides out with the case on perfectly. I have had seidio cases in the past. This case is VERY simular to them. The only difference I can see with this case vs. my past experience with seidio cases for slide out keyboard's like my last from them on the tilt, is this case is padded inside to protect the device. My past experience with seidio cases like this would beat up the phone abit if they were in too long. This guy looks like it will protect that black mirror fuze shell! LOL
Thanks for the heads up...gotta go take a look at this one!
I called 3 stores and they all tell me there is no case for it yet and I tell them otherwise. They don't like being told they are wrong. lol
Daydeal.com has them (well had them when I ordered it) for $19.00 USD.
can you post the bar code for this AT&T case please?
Anybody know if this is the same one as the Body Glove one mentioned a few posts earlier (see the given link)?
hmm looks interesting. im gonna go check my local store.
does anyone know if i can try it on my phone before i buy it? is the package openable so i can test it?
Yeah, got burned on ebay with some cheap a** styli, and now Im looking where to buy the original ones that come with the phone... any ideas?
I bought mine from MSG Digital:
http://www.msgdigital.com/productdetail.asp?productid=46813
Note, these are the HTC stylus for the HTC Touch Pro, not the Fuze, so they come with the matte black tip instead of the glossy black. But they are exactly the same, unscrew with the magnetic weight inside.
BBowermaster said:
I bought mine from MSG Digital:
http://www.msgdigital.com/productdetail.asp?productid=46813
Note, these are the HTC stylus for the HTC Touch Pro, not the Fuze, so they come with the matte black tip instead of the glossy black. But they are exactly the same, unscrew with the magnetic weight inside.
Click to expand...
Click to collapse
Do they fit perfectly on the Fuze, as the original did? I dont care about the color but I do care about the fitting.... I want them to look just like the originals one that my Fuze had.
Yes, the are exactly the same. The reason for the difference is the Fuze's back is the glossy one, while the original HTC Touch Pro has a rubber like backing, so these styluses are a matte black to match the rubber backing. Otherwise, they are the exact same weight/look.
Edit: posted some pictures. The last shows how its a different finish, but fits perfectly in the phone. (Phone has invisishield applied, so it has some dust/lint)
I use this site. http://cnn.cn/shop/
How 'bout the HTC accessorystore
http://www.htcaccessorystore.com/uk/p_htc.aspx
I got a spare stylus with my fuze.
Check your box, you should have a spare.
theomni said:
I got a spare stylus with my fuze.
Check your box, you should have a spare.
Click to expand...
Click to collapse
Lost both of them already... got a spare one from a friend of mine! But Im still looking for the OEM ones... will check the link to HTC accesory store that was posted.
Droga said:
Lost both of them already... got a spare one from a friend of mine! But Im still looking for the OEM ones... will check the link to HTC accesory store that was posted.
Click to expand...
Click to collapse
I have four of them (got extra stuff through warranty, and att let me keep all the duplicates ). If you want one, I could send you one in an envelope for $5
I've dealt with these folks from Canada ... here's the USA link:
Expansys
http://www.expansys.com/p.aspx?i=169458
Hi,
Wondering if I can get some feedback on this housing replacement I found on ebay. From the look of it, it looks the same as the Fuze.
http://cgi.ebay.com/GENINUE-HOUSING...wItemQQptZPDA_Accessories?hash=item3ca6574797
Thanks.
I like it better than the OEM Fuze case, it comes with the matte finish battery cover instead of the finger-print magnet glossy one.
I've ordered from here several times, never had a problem. Don't know if they will have it, but worth a look. http://cnn.cn/shop/
installation difficult?
Hey, mate. Did you order it? Any idea on how easy these things are to install?
I am also thinking of getting me one.
chubrk24 said:
Hi,
Wondering if I can get some feedback on this housing replacement I found on ebay. From the look of it, it looks the same as the Fuze.
http://cgi.ebay.com/GENINUE-HOUSING...wItemQQptZPDA_Accessories?hash=item3ca6574797
Thanks.
Click to expand...
Click to collapse
looks damn good to buy but theres no hole for the PTT button -_- sucks for us FUZE owners
XERO_Racer said:
looks damn good to buy but theres no hole for the PTT button -_- sucks for us FUZE owners
Click to expand...
Click to collapse
Yeah, but I could get used to that. I only use it for the comm mgr anyway. It also has a different keyboard layout... I may have to look into this. Noticed it also has the slot for the front facing camera
silentP said:
Yeah, but I could get used to that. I only use it for the comm mgr anyway. It also has a different keyboard layout... I may have to look into this. Noticed it also has the slot for the front facing camera
Click to expand...
Click to collapse
is there a way to cover up that lost PTT area once u take out the button? i dont wanna shorten anything out
XERO_Racer said:
is there a way to cover up that lost PTT area once u take out the button? i dont wanna shorten anything out
Click to expand...
Click to collapse
When I disassembled my fuze, I looked at the components. The button actuation shouldn't interfere. It's far enough below the surface.
chubrk24 said:
Hi,
Wondering if I can get some feedback on this housing replacement I found on ebay. From the look of it, it looks the same as the Fuze.
http://cgi.ebay.com/GENINUE-HOUSING...wItemQQptZPDA_Accessories?hash=item3ca6574797
Thanks.
Click to expand...
Click to collapse
Does it comes with the outer keypad (the "send", "home", "back", "end")?
elladb said:
Does it comes with the outer keypad (the "send", "home", "back", "end")?
Click to expand...
Click to collapse
I looks like it has a black plastic covering on it. It looks like it peels off