Back door cover in black? - Wing, P4350 General

Hello,
sorry for my stupid question, but does somebody know, where can I buy back black battery cover for HTC P4350?
On eBay and other servers I can only find blue covers for T-Mobile Wing
Thank you very much!

I am not sure how different your battery cover is to the wing in how it attaches but I can tell you the Wing/Atlas covers on eBay, etc... do come in black and fit very well. Again, not sure how your back cover compares to camera placement on the wing but that could be an option.

Thank you
So another question:
Does somebody know, if Wing/P4351 backdoor cover fits on HTC P4350?

They don't
I originally had a 4350. The back on it is both shaped and attaches differently than that of the Wing. I don't know why they changed it on the wing, and the back on the wing is held on by four of the tiniest little tabs you can imagine, and they break easily. If you ever insert the stylus at an angle, expect to break off the tab in that corner. Terrible design. The 4350s back cover covers only the battery area, and locks in place with a sliding switch. Never a problem with that one.

Ah, thank you very much dude. I was almost ordering Wing back door cover, now I know, that it won't fit. Thanks

Related

Strip of Rubber on T Mobile Battery Cover

The small sliver of rubber that is stuck horizontally towards the bottom of the back of my Vario has fallen off.
I bought the device in the UK but am now out of there and the devices sold locally to me don't have this piece. Does anyone have details of a 'spares' company that could sell me this ridiculous 'part'? The stamp for the envelope will definitely be worth more than the piece of rubber but it's so handy and I want it back!
well, i would try calling the factory in taiwan, hah! (or making your own piece of rubber)
Yeah...mine fell of too...but I don't miss it at all, maybe that I will make my own peace of rubber sometime, but for now it does not bother me a single bit
if you live in atlanta i can give you mines i doubt anyone sells that piece, just buy the battery cover.
mine fell off too but I didn't really care. just get a black marker and color that part of the battery cover where the rubber used to be. it will look brand new again! lol
Egrips. check em out
Replacement battery covers cost $7 from HTC. Google them or search this site for contact numbers.
I'm just gonna search for a little piece of rubber and cut it to the correct size.
Then I'm gonna glue it to the battery cover of my Wizard. Only then I am sure it will never fall of again
Molski
I have a broken battery cover with the rubber part still on it. PM me your address and I'll post it to you.
First come first served.
Steve.

Cingular 8525 housing availablity?

Hi I have a Cingular 8525 and as usual due to my clumsiness I have drop it twice on the cement. Everything's working fine but being a person with a mild case of obsessive compulsive behavior I am buggin......
Also if you guys are looking for a case for your Hermes you should try to avoid this style. My 8525 was securely in this case and the phone 'flew' out of it when it was knocked on the front side of the case. The phone flew out knocking the battery boor, battery, and the sim right out of the phone. Not good! Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
I have tried ebay for a replacement case and unlike all my other phone nothing is available and I mean nothing. Not even one cheesy knock off is on there for this phone.
Has anyone here looked into getting an OEM housing for the 8525?
Personally I would prefer to keep the phone in a 8525 case versus changing it out for other verients.
Sorry for the long post.....I'm sick in bed with a 103 fever so I figure that I would bug u guys
Thanks.
Derek
Looking for same for TyTN
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
try this
checkout this site. it has pretty much everything that is available.
you might want to invest in the hard metal case : )
http://www.thepocketsolution.com/cingular_8525_accessories.html
armedmetallica said:
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
Click to expand...
Click to collapse
Did you happen to adjust the hinge(simply by bending it inward slightly) before placing your Hermes inside. I have an aluminum case, and I've test dropped it, and nothing happened.
***Please not from the factory, the hinge merely "clips" over/on the other side of the aluminum housing. If you want to make it more stable you have to slightly bend the "lip" that connects to the lower portion of the housing. YMMV. I had to readjust mine once as the first time I had it way too tight, and it was very hard to get my Hermes out of the case. Now it simply closes with an authoritative click, and I know my Hermes is secure.
Anybody find a place to get the housing for an 8525 yet? There is a large (its not that large, but its visible enough to be annoying) gash on the metal bezel running along 3 of the 4 sides of the display of my 8525
im new to the forums, but my 8525 got knocked out of my hand and got pretty messed up. my "t" key has also started to lift off of the pad. i wanted to know if this has happened to anybody and if there is any replacement keyboards for sale also. can i swithc over to the tytn with the proper front keyboard? any help would be amazing.
i just bought a dummy 8525 off of ebay, Im not sure how they are made, but I am going to see if I can switch the housing
please let me know how it works, i was thinking of doing the same thing...
itlynstalyn said:
please let me know how it works, i was thinking of doing the same thing...
Click to expand...
Click to collapse
The dummy thing did not work, it isnt an actual housing, only the front buttons work, the rest are fake and do not move, there isnt even a real battery cover, its one piece. That was a waste of $10.99
still really desperate to get a new housing, anyone know where one is available?
http://cgi.ebay.ie/OEM-Housing-for-...temZ260100290172QQcategoryZ3728QQcmdZViewItem
Well let me add that I am not the seller. so don't ask me any questions, but this is a seller I have bought housing for my imate jam before...
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
BSoD_leet said:
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
Click to expand...
Click to collapse
If should be ok, but you wont have the power button on the right side... ahahhahah it would jzu be a 8525 hahah
Why dont you juz get this one instead... tho
http://cgi.ebay.ie/For-O2-Trion-iMa...ryZ15039QQrdZ1QQssPageNameZWD2VQQcmdZViewItem
armedmetallica said:
purchased invisible skin
Click to expand...
Click to collapse
armedmetallica, where did you purchase the skin from? could you please PM me, thanks!
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
http://cnn.cn/shop/tytn-grey-housing-p-1295.html
There you go guys.. I dropped my phone before christmas, and broke the latch that holds the battery door on, and I had to use some tape for awhile. I must have ordered one of the last Cingular 8525 cases, since all they have is the HTC Hermes black cases with the front camera hole.
That shouldnt be too big of deal to you guys though looking for new cases. It took about a week and a half to get here (FL, USA) from Hong Kong at Christmas time. Very good site..
spanky310 said:
Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
Click to expand...
Click to collapse
I use a case with magnetic closure..............I put the device into the case with the screen facing away from the magnet and I have never had any issue with it.
http://www.gsm4world.us/shop/cingular-8525-8525-c-210_276.html
55 bucks and your back in business
I am having the same problem sourcing the correct housing for my phone. I am from the UK and have searched high and low to find a housing for the UK equivalent the SPV M3100 (HERM100 - so the label says).
I have checked all the sites mentioned above, at cnn.cn they dont have the correct housing as the front buttons are different? and the cingular housing is 1: not a nice colour! and 2:L i dont know if this includes the mid plate as well.
Does anyone know where i can get hold of the correct housing(not silver) i dont mind the branding.

Attention to ebayers!!! - Full Housing for Trinity

Good afternoon,
Recently bought a housing for my trinity. (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=120315350939)
The product was not expensive when compared to others, and it is the original cover from HTC. I have the white one, so i wanted to try the black.
The product came as quicker than expected and in perfect conditions. Also, the seller offers a complete kit to disassemble the Trinity. Checked the Dimantos tutorial (to whom i'd like to thank) in http://forum.xda-developers.com/showthread.php?t=311463 and dissassembled my old cover.
The black cover i bought didn't even have the LEDs, the camera protection, the buttons (camera, power) - Well, i thought, i can reuse the old ones. And so i did.
But, unfortunately, when trying to fasten the screw, i realised it's just plastic (there nothing in the cover to "receive" the screw) and its impossible to fasten them.
Also, i'd like to know if its possible to buy those little golden pieces, since i don't want to break the other cover to take them out.
Thanks in advance
wow it looks like you've been conned man...
hm
In my country we say:
how much money-that much music
dont buy cheap things, thaey are mostly not good
pjvieira said:
...The black cover i bought didn't even have the LEDs, the camera protection, the buttons (camera, power) - Well, i thought, i can reuse the old ones. And so i did.
But, unfortunately, when trying to fasten the screw, i realised it's just plastic (there nothing in the cover to "receive" the screw) and its impossible to fasten them.
Also, i'd like to know if its possible to buy those little golden pieces, since i don't want to break the other cover to take them out.
Thanks in advance...
Click to expand...
Click to collapse
Same here,
but I menage to pull out little golden pieces and place them in my new housing.
If you don't find "little gold pieces" here what you can do...
Fasten the screw in golden pieces but only a half way, than take tweezers, grab screw, and pull it out..
Warm golden pieces with lighter (also use tweezers) and stick them in new housing...
I got a cover from ebay and it pretty much went straight on except i had to put the old buttons in because the new on did not come with new ones
Hi,
it s incridible, i ve just finish to change my housing of my trinity 5 minutes ago !!!!
Same problem as you, no way to put screw, so i destroy my old housing to get the 5 gold piece, and i put it in the new.
One thing to say : f***k this seller on ebay, he says nthing about this issue !!!
Good Luck.
trinity housing from ebay
YUP YUP same thing happened to me! Me and my buddy used a lighter to warm the case and then forced the screws in. I had the black and got the white, I also bought the white silicone case too looks good! It was a nightmare I had to use EVERYTHINGfrom my old case.

Problems with battery cover?

Anyone had problems with the battery cover? I took mine off when I first got it and when I tried to put it back, it only clipped into 3 corners, 1 was loose and slide on and off so was never flush.
I've sent it back to Mobilephonesdirect for them to "assess" and see if a replacement is needed. Bloody hope so, its faulty!
Nope, no problems here although i had to open & close the cover several times to reset the device.
Other than finding it the worst battery cover design ever made by HTC, no. I did notice that when putting it back on you put the right side in first and then snap it all down evenly, that it left one corner up and it simply needed a gentle push and it all went flush.
I am concerned about the long term use of the cover, it is difficult to get on and off at best and certainly not designed for ease of use.
The cover is metal but the phone it snaps onto is plastic....and the plastic contact points will wear, that's if the metal battery cover itself doesn't relax its shape a little and get less tight. It seems a bad solution to me but HTC aren't alone in this, I see that battery covers are becoming cheaper and nastier across all brands. At least the HTC cover is metal. I try not to remove my cover...ever.
Yeah, it's a little tight for my liking, if you swap out the sim or memory card a lot it could cause problems. Second battery too.
Hopefully the back case will be available to buy somewhere. It must cost pennies to make.
arfster said:
Hopefully the back case will be available to buy somewhere. It must cost pennies to make.
Click to expand...
Click to collapse
Yeah, but they'll probably be available on eBay for about £25, despite that.
I thought I was doing something wrong when I could not budge mine.
On a new phone it takes quite a bit of brute force.
battery cover
Yep, mine stays up on one corner too. Just a little nudge and its back on flush!
Technique is King
Everything requires a technique, then it becomes easy!.
Really all one needs to do is slide your thumbnail under the cover's edge; from one end to the other till there is a millimeter gap, then voila! simply pull off!
If you try to pull it off using the indented 'tab' then good luck to you, Frustration Guaranteed!
sunking101 said:
I try not to remove my cover...ever.
Click to expand...
Click to collapse
Unforyunately my phone already got stuck a couple of times and the only way to bring it to live again was removing the cover and soft reset or remove the battery.
A shame that the reset button is not reachable from the outside. It might be easy to make a small hole in the cover right above the reset button.
nicelad_uk said:
Anyone had problems with the battery cover? I took mine off when I first got it and when I tried to put it back, it only clipped into 3 corners, 1 was loose and slide on and off so was never flush.
I've sent it back to Mobilephonesdirect for them to "assess" and see if a replacement is needed. Bloody hope so, its faulty!
Click to expand...
Click to collapse
I had the same problem with the cover on mine. I found that I must have slightly bent the cover when i first removed it, when i bent it back (to make the fit a bit tighter) it never happend after that.
sunking101 said:
I try not to remove my cover...ever.
Click to expand...
Click to collapse
I will try not too. However if the phone locks up I'll have no choice but to remove the cover and press the red button.
ya i also think the battery cover is design in a wrong way
it took me awhite to open it...
u know i scare i open to hard will spoilt it
Some of the covers are a bit loose. Thank goodness the shop I bought it from, replaced mine for me.

Where to find a non-camera back cover for my Fuze

I need to purchase a non-camera back cover for my Fuze. I suspect a non-camera back cover for any of the HTC Touch Pro variants would work fine. I searched sources for Fuze / Touch Pro parts identified in these fora, but cannot find this part. Does anybody know where I can get one? Thanks for your assistance.
pull out battery door. Use black electric tape to cover it.
Or dissembly the device and pull out the camera then show it to your boss couse it is impossible to find a battery door without camera hole.
sokomind said:
it is impossible to find a battery door without camera hole.
Click to expand...
Click to collapse
When I originally ordered my phone two years ago from AT&T Premier web site, there was also a non-camera variant with no camera hole in the back cover. I bet some some warehouse has a stack of these parts, I am hoping to stumbe upon it. I need something more professional than black tape. I have no issues with removing the camera but if there is a camera hole on the back cover, it would take me 30 minutes to explain and get approval each time I go to a secure location. I am hoping to use my Fuze as a back-up phone on the few occasions I visit a secure location.

Categories

Resources