Need Help Please - JASJAR, XDA Exec, MDA Pro General

i just woke up this morning to find that my Jasjar is dead, never did any upgrade or anything, i tried another battery and it still wont turn on, i can just do a hard reset and when i press X its still dead, only this hardresetting white screen appears, what should i do ? please help
thanx in advance

Related

XDAIIi went dead!!!!

Hello, i have XDAIIi and it was working properly but on a sudden it went dead, no responce nither to the soft reset, nor to the hard reset, and even no responce to the bootloader, simply it went DEAD, is it a kind of a virus or something??? it only when connected to the charger the red LED turns on but no responce... please help...
maybe your battery dead...
The same things happened yesterday! yes, the reason is weak battery.you can replace it with a full one.

Phone won't turn on!

Hi, I'm pretty new to this
I tried to get into bootlogger mode with what I read from the forums but it doesn't seem to be working
is there another way?
there is no light when I plug it in to charge
Please help!
Hi
Did you do a hard reset

No Life

I'm hoping to get some help with this...
Bought the Jasjar apparently with a bad battery... you would dissconect from the charger and it would go for a bit then die, reconnect to the charger and it would go fine.
Now, had it disconnected it died again but this time it wont start up again when connected to the charger. No red charging light.
Soft reset does nothing
Hard reset brings up the "press zero to restore press x to cancel", pressing either and it just dies again.
got a new battery, no change (dont know what the charge of the battery is like).... noticed when you remove the battery the red charge light comes on.... goes off as soon as the battery is inserted.
any advice or help would really be appreciated.
also
is there a way to check the charge of the battery out of the machine?
Bthom said:
I'm hoping to get some help with this...
Bought the Jasjar apparently with a bad battery... you would dissconect from the charger and it would go for a bit then die, reconnect to the charger and it would go fine.
Now, had it disconnected it died again but this time it wont start up again when connected to the charger. No red charging light.
Soft reset does nothing
Hard reset brings up the "press zero to restore press x to cancel", pressing either and it just dies again.
got a new battery, no change (dont know what the charge of the battery is like).... noticed when you remove the battery the red charge light comes on.... goes off as soon as the battery is inserted.
any advice or help would really be appreciated.
Click to expand...
Click to collapse
I would recommend to reflash your ROM, if not have one/ donĀ“t know how
read the Wiki, you will find all you need there
Good luck
I have this exact same problem, I have a feeling it is the battery. Anyone know?
I put a new battery in, with no change unfortunatly.
I cant update the rom, you cant get to the bootloader, the only screen you can get to is hard reset screen.... but it dies again whatever option you choose.
Hey Bthorn, I was able to fix my device. It was not the battery.
All I did was reflash the ROM.
For this to work for you, you need to be able to enter Bootloader mode. Hold the Backlight Button + Power Button then press the Reset button. If you get to a screen that says "serial" and "v.xx" then you are good.
See the Wiki for details on how to continue:
http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
If you really can't get to the Bootloader though I don't know what else to do. Some other people suggest using the mtty method:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Unfortunatly you cant get to the bootloader mode to reset anything.

Bricked wizard

Hello all!
So I have a qtek 9100 and tried to flash with "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe", the installer started, the wizard was showing me the white screen and progress bar, sudently I get an eror message from pc, and guided to repair the erors. Meanwhile my phone gone off, and now it does not want to open, i tried hard reset, but seems nothing is bringing it back to life. I measured the battery and my voltmeter shows 3.8V, so i guess the battery is ok. I tried removing the battery and putting it back on but it doesn't turn on.If plug it in the wall charger, it doesn't lite up the charging led.
I'm kind of swetting...what can I do now?
try to take the battery off and wait in 10 minutes before you place it in.. try to on it after that.. that might help.. have heard it has helped many here in this forum.. either your bricked it or not.. 10 minutes will or might show..
Thanks for the quick answer, i'm waiting now to see if it works.
Any other tips are welcome.
no...no result...it still doesn't go on
Is there no way to Jtag one of these phones?
Sorry...what "Jtag" means?
Is there any chance that when i tried to flash my ROM to burn my battery?

My Uni doesn't boot.

Hello.
I have big problem with my Uni. It's not booting, it's not going to bootloader mode. When I connect Uni to computer the red LED blinks and nothing happen. Battery works in other uni.
hmm leave the uni on the charger with battery in.
also have you tried using another battery in the dead uni?
same problem
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
holy **** me too. i borked my sd slot so i took it apart, just popped off the back and fiddled with the sdpins and now it refuses to boot+redlight.
any thoughts? i miss my phone -_-
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
keyfetcher said:
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
Click to expand...
Click to collapse
did you try another battery in your uni? also did you try tapeing the pin on the battery that reads the voltage level?
according to the universal service manaul flowchart, a redlight indicated bad battery>bad battery pins>shot motherboard.
so i don't think this is good. anyone got any..thoughts on figuring out WHAT exactly happened?
Hi
thanks for the input
will you please guide how I can tape the pin on the battery that reads the voltage level
many thanks
help
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
keyfetcher said:
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
Click to expand...
Click to collapse
I beleive that BA_6.5.23004.WWE-xplode-R7.1 mean blue angel rom. http://forum.xda-developers.com/archive/index.php/t-482997.html
so you are pretty much out of luck unless you can jtag.
again the same problem
keyfetcher said:
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
Click to expand...
Click to collapse
...almost the same.
my problem occurred after I did a soft reset. It took it a while to boot and every other time I used soft reset the boot took longer and longer until it did not want to turn on again.
Soft reset doesn't work but when it's left on the charger and pressed, the battery light blinks once. It won't charge and my PC registers a device malfunction when connected through USB.
The only sign of life pops up when I press hard reset but after I press 0 or X nothing happens.
Please help!
I have same problem as well, I even bought spare battery but uni remains dead and silent.
Beside the fact that when it's connected to PC, windows show unrecognized usb device.
what happened before it died? did you ... do anything to it? mines still dead as a doornail.
I am not alone :'(
It means many other fellows are suffering from same.
strange , total silence from experienced guys... atleast they can say it is useless for you to try.. and now dig a grave for it.
Experienced guys have their own lives too
Wait with patience till someone replies you and do not double post on same topic please

Categories

Resources