I cannot get the BT DUN WM6 to work on the S730. It says it for an older version. Anyone having success?
How 'bout this article?
This isn't BTDUN, but have you tried the internet sharing over WiFi? I'm more concerned with this, so if it works; that'd be fantastic.
Related
Can you describe the actions you took to make it work? I'm using a mac, which I know most of you aren't, but I'd still like to have as much information as possible so I can try to figure out how to use it with macs, via usb or bluetooth. I know there's a wiki entry for tethering via bluetooth with the wireless modem setup, but the method doesn't work with Internet Sharing. If I(or someone else for that matter) can come up with a solution, I'd be glad to add it to the wiki.
kalrykh said:
Can you describe the actions you took to make it work? I'm using a mac, which I know most of you aren't, but I'd still like to have as much information as possible so I can try to figure out how to use it with macs, via usb or bluetooth. I know there's a wiki entry for tethering via bluetooth with the wireless modem setup, but the method doesn't work with Internet Sharing. If I(or someone else for that matter) can come up with a solution, I'd be glad to add it to the wiki.
Click to expand...
Click to collapse
Unfortunately, it seems it won't work with the Mac - see http://www.howardforums.com/showthread.php?t=1041555&page=2&pp=15 and http://www.howardforums.com/showthread.php?t=1030837 .
also see my related remarks at http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1673&more=1&c=1&tb=1&pb=1#more1673 and http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1415&more=1&c=1&tb=1&pb=1
...that blows Appreciate the response though. I wasn't quite sure where to try and get more information on the subject. Doubtful that apple will release a software update for their bluetooth hardware to allow me to do it through bluetooth. I'll probably have to wait on a 3rd party app. Thanks again.
Update...was able to successfully use parallels to tether and connect via usb, but I'm not sure if it's possible to share that internet connection with OSX. Will keep reading.
Cingular 8525 (AKU3)-Internet Sharing with PAN problems
I have a Cingular 8525 (AKU3) and use BlueSoleil BT on my laptop. I followed the instructions described in the forum. After starting Internet Sharing and using PAN I see that the 8525 and the laptop are connected through PAN, but the laptop is not connected to the Internet. What am I missing? I can see that the PDA is connected to 3G, but for some reason on the laptop I can send, but not receive.
I even tried the same with my desktop with the same result. Is there a setting in BlueSoleil that is the cause for not getting on the Internet?
i cant get PAN working on sony ux280p (toshiba stack) with tytn mobile 6.0. it works fine on aku 3.2
Can you describe in detail how you did it?
reinstall or downgrade your bluetooth driver.
i have PAN working on aku 3.3, after i do "windows update", i having the same problem as u. so i have to do "windows restore" back a few week and pan working again.
now i'm on wm6.0, sony ux280p (toshiba stack) cant even find the pan service no matter what i do.
but pan is working on my desktop with windows xp with wm6.0 tho..
Kalrykh, I might be misunderstanding you here. ..but if you're trying to make the phone's "Internet Sharing" provide internet access to your Mac via USB, you can use Missing Sync for Windows Mobile. I've been using it all week (with WM5 AKU 3.3 and now with WM6) and it works *brilliantly*. I just tap "Connect" in Internet Sharing, then plug into my Mac. A few seconds later the Mac is online.
i use missing sync for the mac..all i did was install it and the started the internet sharing program on my tytn and my 8525 and it worked on both
Has anybody used a Nokia N770 or N800 with the new internet sharing system? I am planning to buy one and I want to be able to tether it to my 8525 when I upgrade to WM6.
Ninja1
OS 10.5 will support Bluetooth PAN profile.
I'm sticking with the current official Cingular ROM on my 8525 until then.
OS 10.5 is rumored to be coming out maybe at the end of March.
*wonders*
Why the fuss with bluetooth? the speed isn't fantastic.. stick with good old usb.. =)
leo-chan said:
Why the fuss with bluetooth? the speed isn't fantastic.. stick with good old usb.. =)
Click to expand...
Click to collapse
dont like cable! but i have no choice! bt pan mobile 6.0 dont work with toshiba stack. but usb pan does work..
found no answer yet.
I tried both BlueSoleil1.6 and Widcom5.0.1 on my laptop XP with my WM6 based Qtek9100, both MyBluetoothWorkplace and Internetsharing show the connection is established, but IE (on the laptop) can't browse anything (while PIE will work over GPRS).
When I Ping the device IP interface (eg.192.168.0.1), it returns "request timeout".
That's strange! any help on that?
Is anyone aware of a method to have Internet Connection Sharing use the Wifi connection (ad-hoc) instead of BT PAN or USB?
It seems like all the necessary components (DHCP, etc) are already there...
I guess I'll give it a go myself.
fluxist
fluxist said:
Is anyone aware of a method to have Internet Connection Sharing use the Wifi connection (ad-hoc) instead of BT PAN or USB?
It seems like all the necessary components (DHCP, etc) are already there...
I guess I'll give it a go myself.
fluxist
Click to expand...
Click to collapse
Not by default. It'd, however, be indeed great if you could come up with something like that.
do we know something new about this.
A really dream ICS would be an ICS with Wifi (Router) option.
SOLVED!
I got ICS working over WIFI!!
The Hermes (and presumably any other WM6 phone with ICS) can now function as an 802.11b/g access point.
It's a bit hack-ish right now, so I'll post a cab or application shortly.
sweetness!
fluxist
is there an app out there availble that uses dun to tether instead of pan please let me kno it would be greatly appreiciated
PDAnet has the ability to make DUN happen but it says only on 2.0+.
I'd like it too for my TOMTOM's live traffic.
yea would pdanet possibly work on one of the 2.0 plus roms or i bluetooth still not really full working yet
I just rooted my N1 with CM 5.02 and I CAN get the USB internet tethering working, but wondered if there is a way to make it work over the bluetooth. I have looked around online and cannot find a definitive way to do it. When I try and search the forum, my browser (on my desktop) freezes up and has to be restarted.
Any help would be greatly appreciated!!!
WiKDMoNKY said:
I just rooted my N1 with CM 5.02 and I CAN get the USB internet tethering working, but wondered if there is a way to make it work over the bluetooth. I have looked around online and cannot find a definitive way to do it. When I try and search the forum, my browser (on my desktop) freezes up and has to be restarted.
Any help would be greatly appreciated!!!
Click to expand...
Click to collapse
http://code.google.com/p/android-wifi-tether/downloads/list
over wifi...not bluetooth
That link you gave me for the tether works on bluetooth or wifi.
Works very nice, thanks for the link...
It works nicely. It uses Bluetooth PAN, though, rather than Bluetooth DUN. Is there any app out there OTHER than PDAnet ($30!!!) that enables Bluetooth DUN? Or better still, is there some way to get it without an app? Seems like basic functionality.
WiKDMoNKY said:
That link you gave me for the tether works on bluetooth or wifi.
Works very nice, thanks for the link...
Click to expand...
Click to collapse
NICE! I wouldn't know...my laptop is a senior citizen.
I searched quite a bit and it seems that there is still no option of connecting the Vogue to the internet through Bluetooth PAN and PC's internet connection. Can anyone confirm that PAN is still not possible with the Vogue.
Thanks
Lewy1 said:
I searched quite a bit and it seems that there is still no option of connecting the Vogue to the internet through Bluetooth PAN and PC's internet connection. Can anyone confirm that PAN is still not possible with the Vogue.
Thanks
Click to expand...
Click to collapse
I set up a working pan a couple of years ago. The problem is that the framework doesn't recognize pan as a valid internet connection, so the connection checks for browser, market, etc. fail. The only way I know it was working is that Google maps worked. Go figure...
that problem may not exist in the cm builds. I have no clue what build I was using when I tried it.
Thanks, I'll have to look in to that.
so it doesn't seem to work.
I'd love a solution to this problem too.
Right now, I can't connect to the internet with my Vogue because it is unactivated. I've been trying to get a Bluetooth PAN to work for the past year or so, but I've given up. It's just too old to be worth it!