Database Users

how to transfer phone call from bluetooth headset to Xda II

hello, everyone:
anybody know is there is any possibility to transfer phone call from bluetooth headset to Xda II, if I already use bluetooth headset to pickup phone :?:
Thanks

Have you tried clicking the headphone icon in the top status bar?

when a call comes into the phone, a dialog box pops up, allowing you to transfer the call to the phone. how long this stays there i do not know. the other option is to turn on the speaker phone by holding down the green button.
hope this helps
Smiley

As griffog indicates, click on the headset icon on the XDA II. A balloon window will pop up indicating that the "Bluetooth headset is on". Simply tap "Transfer call to phone", and there you have it!
HTH!

when I pick up phone, I don't have "headphone icon"
I guess that because I install "Pocket Bluetooth Tools" software
so maybe problem is the Pocket Bluetooth Tools
anyway, Thanks~

in my BlueTrek G2 headset, if you puch the "Talk" button for 2 sec during the call, it will be transfered to the device ... I guess this is a common feature in all headsets ... just try it

Biso007 said:
in my BlueTrek G2 headset, if you puch the "Talk" button for 2 sec during the call, it will be transfered to the device ... I guess this is a common feature in all headsets ... just try it
Click to expand...
Click to collapse
Thanks, I try this solution in my SORRYEricsson HBH-65 Headset, it not work, just can turn off my Headset.
Ha Ha~

I agree about the SE HBH 35 poor flexibilitity with my Qtek 2020. But as most of the "Blue tooth blues" regarding the XDA II, it's in part to HTC/M$ blame, since the same headset does an impressive job with my SE T-68 phone: voice dialing, call transfer to/from head set, head set incoming caller voice ID, etc.
So I keep thinking that BT is the worst part of the XDA II.
:evil:

BRosenow said:
As griffog indicates, click on the headset icon on the XDA II. A balloon window will pop up indicating that the "Bluetooth headset is on". Simply tap "Transfer call to phone", and there you have it!
HTH!
Click to expand...
Click to collapse
And to trasfer the call from Phone to Headset? Is it possible?

There is little information about this subject in the user manual - but I have tested this with my i-mate and SE HBH-30 BT heaset.
If I answer an incoming call with the headset and then transfer that call to the phone, I can then press the button on the headset and transfer it back.
If I make a call with the phone or answer a call with the phone, I can find no way to transfer it to the headset. Sorry.
HTH!

BRosenow said:
There is little information about this subject in the user manual - but I have tested this with my i-mate and SE HBH-30 BT heaset.
If I answer an incoming call with the headset and then transfer that call to the phone, I can then press the button on the headset and transfer it back.
If I make a call with the phone or answer a call with the phone, I can find no way to transfer it to the headset. Sorry.
HTH!
Click to expand...
Click to collapse
Ok Thankx

BT voice dial while in standby

Voice dialing from bluetooth works fine while my K-Jam is on, but when it goes into standby mode it doesnt work. I press the button on the headset and I get the headset beep indicating it has connected, but I never hear the speed dail beep. If I bring the K-Jam out of standby mode, I can see the speed dial program is on teh screen, but it seems stuck. Maybe any ideas?
Thanks, John

All Wizards suffer from this; currently no known way around it, hopefully a update will cure this issue or someone will find a way.

A little more digging and I have seen where others have tried to find a work around. Here is what I am doing for now. I am turning off automatic standby and using the "device lock" to keep buttons from accidentally being pushed instead of putting it in standby by pushing the power button. I am not sure what the battery usage will be now, but I will test it for awhile and see. By the way, does anyone know how I can assign one of the hard buttons to device lock? Is there an exe somewhere or can someone point me to a registry entry for this?
Thanks

haven't found keylock yet, but found "power off"
may create a short cut in programs?

My Qtek does not have this problem.
I'm using voicedial from my bluetooth headset. It works perfect even when the phone is in standby mode! It wakes up and makes the call perfectly!! I have a Qtek 9100 and a SonyEricsson HBH-662.

same here with my dopod 838 and HBH-662 it seems to work nicely even if the device is in standby. Is this because of the headset?
::adit

No problem here either...
Dutch MDA Vario + HBH-662 headset - works like a charm standby or not.
By the way... why bother installing MS Voice when the Wizard comes with it's own voice dialing utility?

lisa1982 said:
By the way... why bother installing MS Voice when the Wizard comes with it's own voice dialing utility?
Click to expand...
Click to collapse
Probably because MS Voice Command is based on speaker independent recognition. So, you don't record a voice tag for the few contacts you dial most often, you just say 'call <contact> at|on mobile|home|work' and it will try and recognise the contact from your entire list.
Also pretty cool for casually pressing the button and asking 'what appointments do I have today' and having the details and locations read out to you...
Dox

lisa1982
OEM voicedial does not allow you to dial by digits 5-5-5-1-2-3-4 etc OEM voice dial is limited to voice tags MS Voice Command allows you to dial any contact in you're list also the ability of MS VC to announce upcoming appointments etc.
There are more these are only a few examples.

Can you guys that are able to make BT calls from standbye mode post what rom etc you have installed?
Thanks, John

Question for all you guys with the SE HBH-662 headsets. Does the caller ID on the Headset work? Meaning when you get an incoming call does it scroll the phone number only or does it display the name of the contact (if you have them in your contacts)? And how is the battery life of the headset ? I've got a Motorola HS850 which I love but I'm having the same problem with voice dialling from Standby and am willing to buy another headset if it works.
Thanks.

Hi firas,
Only the number is displayed in a scrolling fashion and it has a good battery life. Highly recommended

I have the HBH-600 but dont think it would work any different with another headset. My K-Jam receives the signal, and beeps, but seems to get stuck after that. When I take it out of standbye after trying it, I see the voice app is open, but seems to be stuck. If another headset will fix the problem, I would gladly buy it.
John

techspy
My HBH-660 does the same thing as your's I may go ahead and get the HBH-662 and try it thogh, if it will fix the issue that would be great.

marka2k said:
All Wizards suffer from this; currently no known way around it, hopefully a update will cure this issue or someone will find a way.
Click to expand...
Click to collapse
One method that does work is to use the "redial" function on your headset. On my HS850 it's press and hold the call button. The Wizard _will_ wake up and start dialling your last used number. Just tap the headset button again to cancel the call, and you're ready to use Voicedail.

Initiating a redial then cancelling it to get the phone to wake up is a work around but not a fix. I hope they resolve this or if the HBH-662 does work I wonder what the difference is?

marka2k said:
Initiating a redial then cancelling it to get the phone to wake up is a work around but not a fix.
Click to expand...
Click to collapse
Thanks for your constructive input and for stating the obvious :roll: I was simply correcting your statement that there is "currently no known way around it" which is not true. All it takes is two extra button presses.

Tried my new Wizard last night with my old Plantronics M3000 bluethooth headset, Device was in stanby and when i pressed the button on the headst it woke up and voice dailed no problems.
I am using the standard T- Mobile roms with the MDA Vario as it is only a day old.
Hope this helps

bluetooth headset voice dialing problem!!!!!!

I've just got jabra bt800 to match my xda atom. I've paired the earpiece with my atom. It works fine when receiving and making calls. However I really want to know how it can initiate voice dialup program by clicking buttons on my bt headset. I tried different ways even combination of buttons. It didn't work!!!!!! I think there must be some work 2 be done on the registry.
Can someone help me out????

btw, if I hold the call button on my headset, the phone software switches on

Microsoft Voice Commander 1.6 - Voice commands over BT headset - For Blueangel

Any of you guys had managed to get the voice commands coming out from your BT headsets using MS VC 1.6?
i.e. you press BT headset to activate VC 1.6, instructions from VC 1.6 comes through BT headset, you give instructions through Mic of BT headset.
I tried searching in the forum and only managed to find one thread here but that seems to be only applicable to Hermes.
Any help on this would be appreciated.

Working flawless on my wizard. did you setup VC6 to announce via BT? sometimes we miss the simplest things
EDIT: I'm using the motorola H500

From MS Voice Command troubleshooting
Bluetooth Usage Trouble
Pressing the Bluetooth headset button doesn’t do anything
You must soft reset your phone after you’ve installed Voice Command before the Bluetooth headset will work for initiating Voice Commands.
If this doesn’t resolve the problem, it is likely that you are trying to use the Bluetooth functionality on an unsupported device. Voice Command’s Bluetooth functionality will work on devices that include the Microsoft Bluetooth stack, that conform to Microsoft’s guidelines for Bluetooth driver implementation, and for devices that have the correct hardware implementation necessary to route system audio through the Bluetooth headset.
If you have a device that does not include the Microsoft Bluetooth stack, you may be able to route all system audio through the headset using the Bluetooth stack vendor’s Bluetooth control panel. If you can, you can use Voice Command over Bluetooth by pressing a hardware button on the device and conducting the interaction via the headset. The Bluetooth audio routing options will not work properly on devices that do not use the Microsoft Bluetooth stack. You should select “Announce notifications using Bluetooth hands free if available” on these devices.
Click to expand...
Click to collapse
I think you'll need AKU3

_Nomad_ said:
Working flawless on my wizard. did you setup VC6 to announce via BT? sometimes we miss the simplest things
EDIT: I'm using the motorola H500
Click to expand...
Click to collapse
You were right. I missed setting up VC 1.6 to announce via BT. BTW, I had since set it to 2nd option from top, i.e. Annouce notifications using BT hands free if available. When I received an incoming call earlier, I believe the notifications came through the speakerphone as well as my BT headset, and when I spoke, I believe it went through the BT headset. Is this behaviour correct?
If I set to 1st option of Announce notifications using BT hands free only, does it mean incoming calls will go to BT head set only, and nothing from speakerphone?
Thanks.

_Nomad_ said:
From MS Voice Command troubleshooting
I think you'll need AKU3
Click to expand...
Click to collapse
I'm on AKU 3.3, Xplode R1 rom. Thanks.

zard said:
You were right. I missed setting up VC 1.6 to announce via BT. BTW, I had since set it to 2nd option from top, i.e. Annouce notifications using BT hands free if available. When I received an incoming call earlier, I believe the notifications came through the speakerphone as well as my BT headset, and when I spoke, I believe it went through the BT headset. Is this behaviour correct?
If I set to 1st option of Announce notifications using BT hands free only, does it mean incoming calls will go to BT head set only, and nothing from speakerphone?
Thanks.
Click to expand...
Click to collapse
When you initiate a call with the BT hands free button, does the instructions from VC 1.6 come from your Wizard or BT hands free? If you give your instructions, does it goes through the BT hands free MIC or Wizard Mic?

I'm having an intermittant problem with the voice announcing. I can initiate the voice command with the button on my bt headset, I get the little beeps prompting me to speak, I give the command and then 75% of the time I dont get the voice announcement back saying "call soandso home?" but the contact will come up on the screen Every now and then I will get the voice prompt...cant figure out why its intermittant.
I'm using the plantronics 655 with the tmobile wing.

[Q] [SOLVED] Change redial of wired headset to start MVC

I've read around and discovered that the HTC wired headset button only does pick up, and hang up. By pressing it twice it redials. I understood that a long press of this button can't be assigned.
I would like to change the double press option on the wired headset to activate Microsoft Voice Command. Is there a registry hack for this?

*Bump*
Or do I have to switch to a bluetooth headset.

erwindevries said:
*Bump*
Or do I have to switch to a bluetooth headset.
Click to expand...
Click to collapse
Unless something has changed...I think the only way to activate MSVC remotely is to use a bluetooth headset. It is a pain if you use nice sounding wired headphones and still need to drag out your phone to make a call. I can't believe WM hasn't fixed this issue. I had a voice dial button on my Sony Ericsson P800 headset from ...uh...6 years ago??? I hope someone proves me wrong because I listen to music all the time with a wired headset through an iPhone headset/mic adapter.

Here you go, all done:
http://forum.xda-developers.com/showthread.php?p=3235694#post3235694
V

vijay555 said:
Here you go, all done:
http://forum.xda-developers.com/showthread.php?p=3235694#post3235694
V
Click to expand...
Click to collapse
Thanks. I am now able to start MVC by double pressing the button on the wired headset.
I did so, by replacing:
\Windows\redial.exe
with a copy of \Program Files\MS Voice Command\voicecmd.exe
Now I can control my MP3's and dial whomever I want without reaching for my phone.

This didn't work with bluetooth redial.
Any ideas how to change the bluetooth redial command to something else ?

Nice one... was away to post the same question.
Glad I searched first
Thanks!