Greetings to all,
Somebody can tell me - by the experience - what RSU is the best approaching for Wallaby PW10A2, ROM 3.17.03?
One more question - have somebody RSU 3.17.01?
Thanks!
Related
Updated rom's to version Radio 4.16 and Rom 3.15.15
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RUU_ENG.exe = ROM upgrade
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RSU_ENG.exe = RADIO upgrade
Hello i was wondering if the above ROM updates will work on my QTEK 1010:
ROM Version: 3.16.13 ENG
Radio Version: 3.19.01
I mean anyone tested if before or managed to upgrade his QTEK with the above ROM versions from O2 and were there any complications!!
:?: :?: :? :?: :?:
Thanks
Yes I did and it worked fine. I have it running on T-Mobile MDA, Qtek 1010 and Eurotel dataphone (rebranded Qtek). No problems.
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
It has been answered a few times, look through fora. it's a general pocket pc language change question, but applies to this one too. You need to rewrite the ROM header to match your device. Can be sort of tricky if you don't know what you're doing.
Did you install it
I have the same qtek with 3.16 and 3.19 shall I do it or wait to uk version?
If you don't mind O2 startup screen & O2 autoconfig...
supplier or distributor
nanis said:
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
Click to expand...
Click to collapse
Hi,
My advise to you is to try to get the latest rom upgrade from
either your supplier or distributors.
Also be very wary and careful when you got advice from this
forum on where or which website to download etc especially the
one which you do not have any informations if it suit your device
or not. If it is not suitable then after downloading it to your device
it will freeze up and you have to get it replaced. These people who
give advise take for granted everyone who view this forum are
professional like them. They never realise there are lots of new
users of the device that are trying to find out more informations.
Sometimes no warning was given to you when they just give you
the website to download etc.. I am one of those new user and also
I believe one of the victims too. I do support their intetests in this
forum but not the way some of the advise are given. Hope they
got the message. So good luck to you and happy upgrading.
Why on earth would you want to go from 3.16/3.19 to 3.15/4.16? Makes no sense to me...
bamse: because it's better
I'am used xda radio upgrade 4.16.00 with qtek
it is fine
I would like to get copy of orginal Qtek 1010 Rom 3.14.06 and Radio T313.Anybody knows where I can get them? are they in the Internet?
I need to restore my orginal PPC2002 and Radio too
Thanks
Hi - i'am new to this forum, but i hope i can help. Here is a link to some software, hope you can use it:
http://www.qtek.nu/default.asp?nc=5551&id=37&element=35
Peter
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
Hi!
I read lots of articles about upgrading device soft but i can't get it clear enough. First of all: is it possible to upgrade my XDA/Wallaby to WM2003SE? I know it can be done with XDAII but I have Wallaby...
If Yes, can somebody write a detailed description about upgrading it or just paste in some links where the description and files are? What radio etc you recommend and why?
Here is what I'm running:
Microsoft Pocket PC version 4.20.0 (Build 13252)
ROM ver: 4.01.16 ENG
ROM date: 02/04/04
Radion ver: 4.21.00
Protocol ver: 32S54
What can i do with that? Thanks in advance
You cant upgrade wallaby to wm2003se.
so therefore is it possible to upgrade it with wm2003? I looked at siemens site looking for update to wm2003 but it is no longer available... anyone having it? is there any news about wm2003se available for Wallaby any soon?
sniffer you have mw2003 all rom versions beginning with 4.xxx are 2003
all that are 3.XXXX are 2002
http://lumpistefan.dyndns.org
HTH
Stefan
>>>http://lumpistefan.dyndns.org <<<
this site contains only WM2003 and not the Second Edition (WM2003SE) !!!
can anyone please post a URL to download the new WM2003SE for Wallaby ??????
I have Qtek 1010 with WM2003 ROM (full of bugs)!
Please help, please!
afaik there is no WM2003SE for Wallaby
M4io said:
afaik there is no WM2003SE for Wallaby
Click to expand...
Click to collapse
Not really true.
There is a WM2003SE Version for the Wallabys.
But it´s protectef by an unknwon key, that uses (i think) the IMEI. Until now it´s not possible to use it on every device, since this key have to be adapted in any way to each device....
Stefan
Damn!!!! and why the hell did they protect it with a key?!?!?
you mean that no one ever can crack that key? ohhh
Siemens Upgrade 2003
if any one interested I have the upgrade for 2003 from ATT Siemens Sx56
please email me
I tried to upload it but didn't let me
kucuso can you please upload it to an FTP server?
I have an FTP site ready if you want, and I can share it thru all members here
Please contact me on [email protected]
Thanx dude
i just got a qtek 9100 and it has the 01.01.10 Radio rom i need help upgrading and how do i upgrade.... i m new to this please help thanks in advance
HELP RADIO ROM
ok i found a update.. now my radio rom is 01.12.10 i dont know if there is another update PLEASE HELP
Re: HELP RADIO ROM
keypat said:
ok i found a update.. now my radio rom is 01.12.10 i dont know if there is another update PLEASE HELP
Click to expand...
Click to collapse
Search more and you'll find 02.07.10 which brings stability against PowerOn->RadioReset bug and best EDGE performance so far
is this I-mate rom update, and if so how can i update that on Qtek 9100 cuz i tried and it said its not the rite device, is there something that I m doing wrong thanks