Database Users

Qtek 1010 software for O2 XDA?

I have for a long time been looking for software updates for my O2 XDA (I have ROM 3.02.00 ENG and radio version 4.01), but with no luck.
Now I have noticed new software for free download for the Qtek 1010, apparently ROM 3.16.13 ENG and radio 3.19.01 (should this be 4.19.01?)
Is it possible to use these 2 files to update the software?
As my O2 XDA is unlocked, I wonder whether updating the ROM and the radio version will have any effect on the unlock, i.e. could the phone change to locked?
Best regards
Amoll

amolldk said:
Now I have noticed new software for free download for the Qtek 1010, apparently ROM 3.16.13 ENG and radio 3.19.01 (should this be 4.19.01?)
Click to expand...
Click to collapse
Where have you found these files!?!? I have a Qtek, but haven't heard anything about no upgrade. You bet I'm interested!
/b

Can be found for download on these sites:
http://www.idedata.no/
http://www.klingtech.dk/produkter/Qtek-1010.php
I am still curious whether this upgrade can be used for O2 XDA.
Anyone for a test?
Best regards
Allan

It's working! I just upgrade the radio rom from 4.16 to 3.19.01.

Sound more like a downgrade then a upgrade. :lol:
Did you also did the winCe rom upgrade?

Don't look at the first number in the OS or radio versions, it denotes region. 4.16 is an older version than 3.19.

Was the upgrade done on a Qtek 1010 or a XDA?
Amolldk

Hi
Anonymous said:
Can be found for download on these sites:
http://www.idedata.no/
http://www.klingtech.dk/produkter/Qtek-1010.php
Click to expand...
Click to collapse
They only say, somthing about sending the OS via eMail. It seems, that there now downloads left ...
Has somebody got that Download and is willing to share it with us ??
Thanks

The image can be downloaded on the first site...
however, I have just reflashed my XDA/MDA with the older irish ROM, it has plenty more features than this one, GPRS standby and ISDN call type.
Don't trust the version numbers

Zviratko said:
The image can be downloaded on the first site...
however, I have just reflashed my XDA/MDA with the older irish ROM, it has plenty more features than this one, GPRS standby and ISDN call type.
Don't trust the version numbers
Click to expand...
Click to collapse
Where is the Download option for the Radio Version on the first side, I can´t find it.

http://www.idedata.no/support/support.asp?ID=299

SladeHammer said:
Where is the Download option for the Radio Version on the first side, I can´t find it.
Click to expand...
Click to collapse
Think this might be more usefull http://www.idedata.no/programmer/ce316upgrade.zip For CE
And for the radio
http://www.idedata.no/programmer/radioupgrade.zip
Please note you must first upgrade the CE version then the Radio...upgrading the radio only can cause problems

NoBackUp said:
SladeHammer said:
Where is the Download option for the Radio Version on the first side, I can´t find it.
Click to expand...
Click to collapse
Think this might be more usefull http://www.idedata.no/programmer/ce316upgrade.zip For CE
And for the radio
http://www.idedata.no/programmer/radioupgrade.zip
Please note you must first upgrade the CE version then the Radio...upgrading the radio only can cause problems
Click to expand...
Click to collapse
You are wrong, the Radio update goes first and patches WinCE.
btw. don't use the update, really, use the Ireland O2 update ROM.

Strange file after updating
I have upgraded my Qtek using
http://qtek.dk/software/upgrades/316-CE-update.zip
http://qtek.dk/software/upgrades/Radioupgrade.zip
I performed all the instructions correctly and my pocket pc now has the
upgrade. However, in the remove programs, there is a file called HTC RSUupgrde.
I dont know I don't have to remove this or should it actually be there on my pocket pc? What happens if lets say I have to do a
hard reset and I lose this file?
Any suggestions? :?:
[email protected]

How to use FM in India
Hi,
My frnd has gifted me a O2 XDA Orbit.....I bought this from UK...BUT I am not able to listen fm in India.....
Please help me.......
Also plz suggest me some website to get some games, software for O2 XDA Orbit.....
Thanks in advance
Sam

upgrade ram and radio to last versions

hi all my friends i'm just want to asking you !
whats... RAM , ROM, RADIO SYSTEM AND PROTOKOL functions (with the last versions) ?
where, i can get the sources to upgrade my xdaI ?
now i used O2 xdaI, with spec : - ROM VERSION : 4.00.16 ENG
- RADIO.S VERSION : 3.25.00
- PROTOKOL VERSION : 32S54
with my spesifications ..whats is your suggesting me ?
for maximal using indeed .
thanks a lot for you all !
appreciated to your quick reply my posted !! once..thanks

Hi ...
The RSU you have now is the latest for Qtek ... if it works fine don't upgrade it. For the ROM, there is TMO 4.01.00 but the current EXE file has the RSU part within and actually it starts by RSU upgrade then the ROM.
So, unless you know how to extract the ROM files from this EXE, I would advice you to stick to 4.00.16 or you may try 4.00.21 as well and you can get it from www.yorch.net
Good luck ...

wau...
Biso007 !!
Thanks a lot heard happy read your relied..
one quetions please...
i was download yahoo messenger 2003 for my xda but cant proses.. any suggesting for me ??
once thanks....BISO

I never heard of any one could get it to work ... I use Imov ... and it works fine for ICQ, MSN and Yahoo

ROM UPGRADE FAILED!!!
HELP!!!! I was doing an upgrade but this came up?
>Your device information
Model: PW10A1:007
ROM Version: 3.14
Language: English
Your Upgraded information
Model: PW10A1:001
ROM Version: 3.26
Language: English
Please download compatible utility and try again <
What does this mean? How can I find a compatible utility?
By the way I'm not that techie...
THANKS

It seems you tried an official upgrade file which usually do a version verification. You better try a cooked ROM from www.yorch.net

Windows Mobile 2003 Release date announced!!!!!!

T-Mobile Germany has annouced the release date for the Windows Mobile 2003 ROM for the XDA I as December 29th. Hopefully T-Mobile USA will announce something similar today. :roll:
http://www.t-mobile.de/mda/software/1,5193,7482-_,00.html

But this is only for German Model, isn't it?

hmmmm ... and how about the language version ?!
to me seems like only German is to be available ... too bad

Release date is now beginning January
Hope there will be an update....
Regards
Stefan

aren't we talking about the German version of WM2003 ..
announce/release date or in general WM2003 official release for T-Mobile ??
regards,
monika

http://www.t-mobile.com/promos/ppc2003/
this link was working few weeks ago with information about update but now seems to be dead.... somebody spoke with customer service and they said "in the middle of February" so we will see...
for me 4.01.00 ENG work fine
ps. pozdrawiam rodaczke

well, maybe there has been some minor problems ...
with that ROM release so they've decided to stop distributing for a while, hard to say ...
I presume as official release is hopefully coming with a short notice stick with current version I have
regards,
monika
ps. rowniez witam i pozdrawiam

somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....

mine XDA is also PW10B1 .... heh
now I know for sure that I have US version, thank you for the tip ...
dziekuje i pozdrawiam,
monika
ps. out of curiosity, have you already get my private message ???

HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,

chris_khho said:
HI Monika,
Where did you get this T-Mobile WM2003 ROM?
Is it English version?
Can it be used in Asia?
Many thanks,
Click to expand...
Click to collapse
hello, I got it from http://www.yorch.net/ but I use an US version of XDA, for me it's hard to say whether it suits Asian hardware version, my rough guess is that Radio Stack version shall be different .... unfrtunately I have never came across the Asian hardware version
but before making any upgrades read that forum, e.g.
http://forum.xda-developers.com/viewtopic.php?t=4630
and also the other threads just to double check
regards, monika

Tks Monika,
But I see that you are using WM2003 T-mobile ROM 4.00.21.
From Yorch, 4.00.21 is only nbf file which is not nb1 so that I can't use the SD method for upgrading.
Any hint?

Marcyjok said:
somebody wrote that 4.01.00 ENG is only good to US tmobile ppc owners because of radio ... I mean only for PW10B1 units ...
I did reflash mine yesterday with this version and I like it so far .... signal indicator doesn't look normal because I dont have signal but my ppc recives calls normally ....
Click to expand...
Click to collapse
i have PW10A1 and i installed the v4.01.00 tmobile update i just downloaded an cooked rom from yroches kitchen then unzipped it all and replaced the nbf file from the v4.01 over the cooked rom nbf and flashes it that way works fine on english netowrks and i still have 900/1800 mhz just what ever you do do not go into phone options and click on the band tab if you do you will loose 1800mhz bank and then be on 900/1900 if you do this load up the bootloader click the calendar button and click on gsm 900/1800 and itll say reset or some crap do this then softreset and youll have 900/1800 back again but dont click on the band tab or youll have to do this.
gaz
p.s ive found it to be quite stable so far but seems to run kinda slower then v4.00.11 but it has improved features

hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?

i use 4.01.00 with asian radio stack 4.21.01 with no problem
i used flash method when upgrading the rom
i unzip the exe file, took the .nbf file and write it to my sd card using OSImageTool and boot my xda with the SD card... 5 minutes later my XDA is running WM2003 with the latest ROM version :lol:
for asian users, do not open the band tab... if you do that, you have to go to bootloader and choose band 900/1800 to make your xda work again

Marcyjok said:
hi
few questions
I have US tmobile Pocket PC Phone so it is type B so I flashed with no problem with 4.01.00 (RUUv2.04b_CEv4.01.00wwe_VS_Ozone_Test_(Integrate_Radio_6.24.01).exe) so I think that this soft will work fine with Monika's XDA if it is American....
Monika your XDA is from AT&T ? or TMobile ?
Is it ok to use it with European PW10A1 ?
gaz do you have exactly same ROM as I have ? (check my signature)
and this problem with band tab is only one ?
do you see TMobile logo when U do a soft reset?
Anybody use this soft ver. in Europe?
Click to expand...
Click to collapse
I have an US version of XDA with T-Mobile ROM installed ... and it's T-Mobile ppc pe, radio 4.21.00 and protocolversion 32S54
regards,
monika

Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.

chris_khho said:
Hi Toshiro,
I am a bit confused. The 4.00.21 nbf file from Yorch cannot be used by OSImageTool since I tried that before and confirmed by someone else in this forum. He said only nb1 file can be used for SD method.
Also, where did you get this 4.01.00 ROM?
Thanks v much.
Click to expand...
Click to collapse
Use XDArit.exe insted of the OSImageTool and you can write it to an SD card. www.yorch.net has 2 versions. if the newer one doesn't work, try the older one. I also found I have to unplug my cradle from my computer to get XDArit to work properly.
MrDollyMaker

the best places worth trying
http://forum.xda-developers.com/viewtopic.php?p=21147&highlight=#21147
and also
ftp://tmobile:[email protected]:21
regards, monika

Thanks v much.
But that's integrated with the us radio which is not suitable for me.

ROM upgrade in Australia

I just want WM2003 on my XDA. I tried installing 4.00.05 but got the white screen of death. Does anyone know if the Seimens SX56 ROM will work on my phone? I plan not to **** with the radio stack.
Just want a O/S that's newer and not as buggy as the original 3.21 that I had.
I miss my working XDA, it's been 2 long weeks and I finally get my MMC card back so I can flash.
Anyone in Australia got 4.00.05 working or WM2003? Which version you running if so?
Any info would be greatly appreciated.

you didn't tell what's your device type and how the 4.00.05 failed.
I'm not sure the MMC can be used instead of SD card, but if yes, then i may advice you to cook a new 4.00.05 ROM at yorch.net and select the .nbf file method. move the file to your MMC card using the XDAtools and flash your xda through the boot loader.
good luck.

My device type was a:
PW10A
3.20.06 ENG (ROM)
3.21 (Radio)
But after trying to install with an EXE self installer became:
G32S54
4.00.05 (ROM)
R4.21.00 (Radio)
One thing I have worked out about the EXE self installers is that they will extract a NBF file to a directory, in C:\Program Files\Programme A\English
so therefore, whichever version you download in a self extracting file contains the NBF file that's required.

goatieman said:
My device type was a:
PW10A
3.20.06 ENG (ROM)
3.21 (Radio)
But after trying to install with an EXE self installer became:
G32S54
4.00.05 (ROM)
R4.21.00 (Radio)
Click to expand...
Click to collapse
The Radio part shouldn't be affected by this upgrade!.

4.00.05 works just fine. The 4.01.00 and AT&T release ROM are even better (except for the stupid noise attenuation everyone's working to try and defeat).
Never(!) use the .exe method for upgrade, you have a much greater chance of it screwing your XDA. Also, according to your post you weren't messing with the radio, but by using the .exe upgrade you have inadvertantly upgraded the radio. 4.21 is the same version as O2 released for Australia, but I'm not quite sure if you're running the T-Mobile version now? As far as I know you can screw up upgrading your ROM as much as you like using the SD method because you can always whack the SD back in and start again, the bootloader is intact and the radio is intact.
I guess if you use the .exe update method from your manufacturer's release, at least you'll have some recourse in that you were only following what they said to do for the upgrade and they will probably fix it.
Use the SD upgrade method to fix your current problem, and you may need to use the Wallaby patch to do that. Good luck.

Best ROM for a QTek 1010 connected to Vodafone Australia
Howdy,
I have a QTek 1010 which I'm using in Australia on the Vodafone network. Which is the best ROM to upgrade my device to Pocket PC 2003?
Device: PW10A1
ROM version: 3.18.04 ENG
ROM date: 05/22/03
Radio version: 3.25.01
Protocl version: 32S54
Cheers,
CK

Which is the best ROM to upgrade my device to Pocket PC 2003?
Click to expand...
Click to collapse
Use A.30.09, it's the only release version out there. All other versions are beta and have their problems. The only headache with A.30.09 is volume attenuation, but either soon we'll have a fix, or soon another manfucturer will make a release public so we can switch over (hopefully) without that annoyance.

Howdy,
Where can I get ROM A.30.09 from?

Where can I get ROM A.30.09 from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=5623

Thanks heaps for that! The upgrade worked perfect.
You were right about the volume issue becoming annoying! :twisted:

Which Radio Stack is the best to use in Australia?
Howdy,
Another quick question. Which Radio Stack is the better one to use? The QTek 1010 Radio Stack v3.25.01 (32S54) or the O2 XDA Radio Stack v4.21 (32S54)?

Upgrade works but only with 2002 ROM not with 2003 ROM

Have been to the kitchen and done some cooking the last night.
Facts:Using SD card for all upgrades
Never cook anything but the Base ROM itself (e.g. no extras)
The upgrade works perfect every time, meaning it ends successfully so that I can do a cold boot to start the "new" ROM image.
ROM version org: 3.16
Current ROM: 3.20.06 ENG
Radio version: 3.19.01
Protocol version: 32S54
Model No: PW10A1
RAM: 32MB
Flash size: 32MB
SD Card size: 64MB
I have been able to switch back and forth between different 2002 ROM's
but every time I upgrade to 2003 ROM the unit hangs on the introductions screen. I see the splash for instans 4.01.19: s "Welcome to T-Mobile"
In the bottom right corner I can see the Protocol version, ROM version and Radio version numbers. BUT there it is and it does not respond to any buttons or even magic words like pretty please with suger on top.
I have tried the following versions:
4.00.33 GER, 4.01.00 ENG, 4.01.16 ENG and A.30.09 ENG
I have no problem getting back to a working unit with almost any 2002 ROM but hey I wanna try it out with a 2003 ROM.
Any ideas anyone? I have been looking around quit a bit but cant see that anyone posted something that helps me out here.
Thanks to everyone who contributes to this great forum!
Jonas
###

not sure but maybe the 32MB ram is too little for 2003
these devices are pretty rare i think
maybe you should try doing a search for people with 32MB devices
and their exp with 2003 ?

Rudegar said:
not sure but maybe the 32MB ram is too little for 2003
these devices are pretty rare i think
maybe you should try doing a search for people with 32MB devices
and their exp with 2003 ?
Click to expand...
Click to collapse
The 32 MB shouldn't be the problem. Using myself a device with only 32 MB without any problems with WM2003 .....
Maybe it's a problem with the Radio Stack...
Nearly all the providers of a WM2003 Release included a Radio Stack Update. Myself i've tested it with the 4.21 and the 3.23. Maybe yours 3.19. is just too old.....
Stefan

Ok, here we go again,
found the Radio Stack Upgrade from O2 uk (V421)
and upgraded witout problem to this one.
No I tried to upgrade with 2003 ROM 4.01.16 ENG but still same thing.
It hangs on boot screen even though it now in the lower right corner says:
G32S54
R4.21.00
4.01.16
I will try to load ROM A.30.09 ENG now.
I let you know how it goes.
/Jonas

Still no luck
Ok I have now tried will all known 2003 ROMs from the kitchen with the same sad result. (hang on boot screen as before)
I now downloaded the official O2 uk release of upgrade for XDAII (Xda_II_Upgrade_v16050.exe) when I unpack this one I find the following files that might be useful ms_.nbf, NK.nbf, Radio_.nbf.
When I try to write the NK.nbf to my SD card XDATools tells me that it does not recognize the file format.
I think I have seen something about this error but I cant find it now.
Im not even sure if this ROM will work. I can not see that this ROM is uploaded in the kitchen either but perhaps it will be?
So Im still stuck so any tips would be great and I keep testing new ways ahead.
/Jonas

hi. as LumpiStefan commended, you need to upgrade the latest radio stack. I think the radio stack 6.24 will work for you. check my posted for the radio stack.
Secondly, the radio stack will work it its specific OS rom image. for example, the radio stack for Tmoble , must match the Tmobile OS. you can not use radio stack built for O2 for Tmobile OS.
Therefore, try to upgrade with matching OS and its Radio Stack. I tried one night with all OS from Tmobile, ATT and OS to come with these solutions.

hoanghon said:
you need to upgrade the latest radio stack. I think the radio stack 6.24 will work for you. check my posted for the radio stack.
Click to expand...
Click to collapse
That´s wrong. 6.24 is for PW10B Models with 900/1900 MHz GSM. Do not use it on your device
hoanghon said:
Secondly, the radio stack will work it its specific OS rom image. for example, the radio stack for Tmoble , must match the Tmobile OS. you can not use radio stack built for O2 for Tmobile OS.
Click to expand...
Click to collapse
That´s wrong too. Already used some T-Mobile ROMS with O2 Radiostack....
Stefan

hi LumpiStefan,
Okay. I am wrong. this radio stack use in USA.
Also, I don't know but I had tried to swap the radio stack O2 to run on Tmobile or ATT, the radio stack never turn On.
Also can you help me to have a radio stack version 4.20 or lower. ther repair.zip contain version 4.21. Thanks for correcting me.