does anyone know how to remove the password and a UK ORANGE SPV M5000? I bought one off ebay but upon getting it it had a code on it and the seller is being a Bas***d and done a runner.
If you just bought it, you won't need to worry about losing personal data I would imagine.
The best way to dump the PW is to perform a hard reset.
Hold down the two buttons with a "-" on them, then poke the little reset hole at the back.
This will clear all personal data from the machine and restore it to the manufacturer's settings.
if it's the windows password than you can simply hard reset and it will go away.
cheers for the reply. how do i do a hard reset?
PReDiToR said:
to perform a hard reset.
Hold down the two buttons with a "-" on them, then poke the little reset hole at the back.
Click to expand...
Click to collapse
thanks alot guys worked a treat
Related
I have been given a works SPV M5000 and being a man I couldn't help messing with it, trying to install this and that, and now I have completely buggered it. For some reason it won't allow me to reset by using the clear storage, saying it can't find the clear storage exe or something. is there anyway I can hard reset it which buttons do you have to press and in what order. then I can hard reset this and return it and no one will ever know he he he
PS please help I've got to take it back tomorrow.
Thanks in advance......
press the two large "-" buttons at the top of the keyboard, and simultaneously press the stylus into the reset hole on the back.
Cheers,
Steve
Thanks For that steve
I can put it back without anyone knowing i messed :shock:
I think it may have something to with trying to install uncertified CAB files is there any fixes to installing these cabs anyone know ???
Can anyone tell me how to hard reset or format a Typhoon phone? I have an Audiovox smt5600 that freezes and hard reset might fix it...thanks
Power off the phone. Hold down (and keep holding) the 2 soft buttons and dab the power button.
You should get the Cold Boot Configuration screen after it boots up but it can be tricky to get the timing right. Don't worry if it just boots up normally, turn off and try again. :wink:
thank you mate done it on the 1st try
Hard reset SPV C500
citifone said:
Can anyone tell me how to hard reset or format a Typhoon phone? I have an Audiovox smt5600 that freezes and hard reset might fix it...thanks
Click to expand...
Click to collapse
pusch Run button, then 9 for next page, 9 for next page, than group Acessories (can be 4-6 depends on how many menus you have)
i this group is (6) Default settings, after choice give code 1234 and yes
Note. all Contacts, SMS, history except memory card will be deleted.
by
Ok, I have an AT&T 8525 version. It's been upgraded to WM6 using the official patch, and the only other thing I had running on it was SPB shell trial version or something. I set a lock password, where when ever you turned the screen on you had to enter a password to access the device. With the Shell trial thingie it would actually give you the clock first, which was why I was trying it.
Now, my problem is this. I'm an idiot and my phone got dunked in water. I took it apart, well, took the battery out, SIM card, etc, anything I could get out without dismantling the whole phone. Took compressed air and blew on it until my can froze up and I had to surgerically remove my fingers from the can o' air (ok, exaggeration there). Anyways, if I call the phone, it rings and does what it needs to. The problem is that I can't unlock the stupid phone now. I'm not forgetting the number, it just won't accept it. I'm up to 8 mins of wait time before I can reenter it as well.
So, my question, is there a way to break the lock code without destroying the data on the phone? If no, how do I reset the phone completely? Do I have to do a hard reset? Can I take it to AT&T to get them to reset it?
And one big question, does the reset go past WM6 and revert to WM5?
Thanks all.
anything, anyone?
Just having the same problem myself.
Didn't dunk in water, but found wi-fi was locking up so did a soft reset with the sylus in the reset hole and when it rebooted, it would not accept the password.
Apperently, this is a common fault with WM6 where if you reset (or lose power whilst settings are in cache memory) the phone 'forgets' your password.
Maybe this is what has happened to yours - the only way round it is a hard reset.
Must be a "feature" not a bug.
*sigh*
Makes me pretty hesitant on ever using the feature again. I'm having serious issues trying to get it back to Syncing w/ my desktop and letting me access the device as a folder. Right now it's just powering up but nothing else.
How to reset the password
Ive just updated my rom to wm6 2days ago. Now im having the same problem...my device was set to auto off after 3min then when turned on... password prompt...i know the password...but was not accepted. Tried to re-flash wm6 but nothing happened. Anyone plsss help!!!! Thank you very much in advance!
Unit: XDA IIs,WM6 from Helmi & etc (thnk u very much guys ...u know who u r)
Re below post...hard reset did not reset the password tnx anyway
----------------------------------------------------------------
"Just having the same problem myself.
Didn't dunk in water, but found wi-fi was locking up so did a soft reset with the sylus in the reset hole and when it rebooted, it would not accept the password.
Apperently, this is a common fault with WM6 where if you reset (or lose power whilst settings are in cache memory) the phone 'forgets' your password.
Maybe this is what has happened to yours - the only way round it is a hard reset."
maria_terie said:
Re below post...hard reset did not reset the password tnx anyway
----------------------------------------------------------------
"Just having the same problem myself.
Didn't dunk in water, but found wi-fi was locking up so did a soft reset with the sylus in the reset hole and when it rebooted, it would not accept the password.
Apperently, this is a common fault with WM6 where if you reset (or lose power whilst settings are in cache memory) the phone 'forgets' your password.
Maybe this is what has happened to yours - the only way round it is a hard reset."
Click to expand...
Click to collapse
Hard reset worked for me. Only issue now is I can't get it to allow me to explore the device any more. It'll sync emails, etc, but won't let me access the device while connected to the USB.
The WM6 I used was the official version, not sure if that's a difference.
Hi,
I have tried and tried to do a hard reset but the phone only soft resets.
i press and hold both soft keys under the screen (the "-" key above the Q and the "-" key above the P) and then i poke the reset button on the side of the phone. It will only soft reset. I've tried this when the phone was turned on and turned off.
I've even tried pressing the left soft key first and then the right, I've reversed the order . . .
Nothing I try will let me do a hard reset!
Any ideas?
try
No doubt you're doing it, but you have to push both soft keys at the same time as when you push in the stylus. Push both keys extremely hard with your right hand, and enter the stylus with the other.
Otherwise you could just try flashing one of DCD's rom's. That ought to get it to the hard reset status you want anyway right?
hey scotcha12345,
I tried pushing both keys at the same time too (then poked the reset). But it still won't hard reset.
I would like to do a hard reset because I'm sending this phone back to vzw.
I just want to clear the memory of any personal stuff.
I did the Settings>System>Clear Storage thing but I want to be REALLY sure that everything is gone and a hard reset seems like my best bet. (But, of course, the phone won't hard reset.)
Since it does not look like I'll be able to hard reset can anyone confirm that the Clear Storage thing does what a hard reset would do at least in terms of clearing anything personal and getting rid of programs that vzw might not like? (It has the stock ROM so I'm good there.) From what I can tell, I should be ok with Clear Storage but I would still rather do the hard reset.
and just to be clear, I've tried pushing all three (both soft keys and reset button with stylus) at the same time, too.
hard reset
2 other suggestions:
1st:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Scroll down to: Downgrading -- Official Carrier ROMs & associated radios with flashing guides
You could reflash with that. It's the original ROM and radio, so there should be no problem, thus avoiding any warranty deal breaking. (fairly quick and easy)
2nd
I'm pretty sure in the past I've seen a program that has a button that you can just push that does a Hard Reset...looking for it.
I've never done the Clear Storage, so I'm no help there.
Have you tried using the soft keys on the face of the phone? The ones above the windows and ok buttons. I've only used these and never the ones on the keyboard.
Ivan
try doing it by pressing the two softkeys obave the send and end buttons and then prees the reset button with the stylus BUT KEEP PRESSING THE TWO SOFT KEYS, DON'T RELEASE THEM UNTIL YOU SEE THE HARD RESET SCREEN...
btonetbone & nelsongruebr
Thanks, that did the trick.
(Sorry for the long response time. I was in a coma for the last 6 months.)
to answer your earlier question about the "clear storage" method... yeah, that does the same hard reset as when you press the two softkeys (on face of phone) + reset button.
The "clear storage" is the only method for the xv6900 users to hardreset since they don't have softkeys.
Ive hardreset both ways on my xv6800 with the same result.
Having looked all over for a couple of days
I came across a picture with instructions for
hard resetting a wizard, which is resetting the phone
thus the phone lock as well.
Dead easy really
1. Press the Comm Manager button (top left)
together with the Voice Activation button (top right)
for 2 seconds.
2. Keep holding the 2 buttons above and press the soft reset
(middle right little hole) with the stylus for another 2 seconds.
3. When the black screen appears it'll ask you to click Send
That's it All done !!
The wizard's going to reboot and reset himself.
Hope this is going to help some of you.
This is called 'Hard Reset' and perhaps its known to almost every wizard owner,its supposed to be known though !!!
Anyways ! thanz for the info!
ATENTION PLEASE... Thanks.
Nice Thread...
but...
what is a hard reset?
what is a soft reset?
what is a cold reset?
what is a simple reset?
what does it do for us?
What da heck!?
Let me recomend this as sticky....
NOP even tough... as a new topic forum...