Hi,
I am having a slight problem. At home I have connected my Exec to my wireless network using WEP and all is fine. HOWEVER, what if I had more than one wireless network available? I looked with my laptop yesterday and I see the neighbours have got an unencrypted network and in fact there were three wireless networks visible. BUT... if I switch on wireless on my Universal it just connects to my home network straight away as it knows about that one. That's not really a problem, but how can I get it to present me with a list of available wireless networks and let me choose which to connect to?
So, just in case I haven't explained myself properly, here is the question again:
If the Universal knows about a wireless network and is the vicinity of that wireless network, how can I get it to show me all the other available networks? Any ideas?
I fussed about with this question as well. I'm sure it's in the manual, better read that one day and learn how to use this thing :wink:
Load up wireless manager. If you're in VGA, put on your specs.
In the bottom left corner in the "menu bar" area, there are a couple of icons. One of those will bring up wireless networking where you can enter wep details, connect to any network and so on. Alternatively, if it works, use something like hitchhiker.
V
yeah, thats the way, use wireless lan settings manager, and click through there (there is a little image of a PDA bottom left of screen) clik here, and you then have the option to connect to a different network if one is detected, such as your neighbours (! hehehehe) even if you are auto connected to your home network.
Hope that makes sense!
Bryson
Related
Hi!
Before I start tese are my current system info:
XDA2ii (O2) - UK
ROM version 1.10.00 WWE
ROM date:24/12/2004
Radio ver: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.10.124 WWE
OS: Windows Mobile 2003 2nd Edition
Version 4.21.1088 (build 14235.2.0.0)
I am trying to connect to my home WIFI network but I can't seem to connect. It is indeed picking up the server (name appears) in list but just stops at connection to network. It can't seem to get any connection at all. My wireless router (Linksys WRT54G) can't seem to detect it as well.
I have tried connection to WIFI at an airport and it seems to work but not at home. I have set my Linksys to Mixed mode (B and G) but still can't get it to work.
Any advice?
Thank you!!!
XDA IIi (or 2i) and 3COM WAP
Hi.
Got the exact same (everything) XDA IIi model (also O2/UK). I'm also having problems with WLAN/WIFI connectivity both at work and home. Both cases it's a 3COM OfficeConnect WAP (office one not setup by me). I thought I validated that the XDA seems to be OK by being able to connect to a neighbours WAP (some BT-Voyager thing) with no apparent problems. And so was thinking that the problem is with the 3COM WAP. However, your post raises doubts on my conclusion ...
The search goes on ...
Re: XDA IIi (or 2i) and 3COM WAP
hi
My case is even worse, it can not detect any wifi signal at any of the hotspot in my city. Go to wireless Lan Manager, under WLAN button (red status) there is alwayls a sentence: "no connection in use". Clicking to it, the device seem to search but found nothing.
Try softreset, hardreset but the problem remains.
In addition, I try to turn off the phone (turn on flight mode) then it don't allow to turn on bluetooth and wifi too.
Maybe it is due to hardware error.
Really disappoint with O2 UK
Regards
Tuan
WiFi connection problems with XDA2i
I have exactly the same O2 xda2i build as Johnnyboy, and precisely the same problem with WiFi as Blackwolf and Johnnyboy. I have a netgear WiFi access point at home, and have disabled the attach restriction and removed WEP. However, although the XDA can see the network name, it cannot connect to the network (just displays connecting...) nor does it show anything on the signal bar. Needless to say, it does not display SSID, Tx rate, Channel, IP address or any information from the network.
I have bought this device specifically for wifi access, and it is somewhat disappointing. Anyone have any idea how this can be fixed? (if at all :? )
XDA Wi-Fi Successful Connection!!!
Hi,
I'm new to the forum and new to XDA2i....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
Finally cracked it! As I never had any problems with my Netgear MR814 wireless router, I assumed the issue was with the XDA2i. Instead, a router firmware upgrade did the trick! Should have thought of that earlier.
Cheers, S.
When i first got my XDA 2i home from the shop the first thing it tried was the wireless lan, and the same thing happend to me also..... everything fine in the router but still unable to connect the xda.
anyway after few hours of going over every single setting time and time again , it finally worked !!
i left the Wlan enabled and after a period of a few minutes it connected to my network.
So i think the XDA 2i is quite tempremental with Wlan, as i know my settings were correct.
having said that, i have had no problems with Wlan t all since then, it will now even connect to other Wlan hotspots with no problems whatsoever.
The only problem i have now is recieving a decent O2 Cellphone signal i my area
Well I have a XDA IIi and it connects fine and allways has to Citi Hotspots, TMO hotspots and my own Linksys WRT54GS. Netgear is the biggest piece of crap ever sold. If you have one I suggest you soak it in gas and burn it.
I had a problem with my XDA IIi connecting to a home Wi-Fi network with a Linksys WRT54GC router: a signal showed in the Wireless LAN Manager, including an IP address, but the WI-Fi icon at the top of the Today screen had no connection bars. After days of this I went to the Linksys settings for an unrelated reason and disabled Wireless SSID Broadcast. Inexplicably this appeared to cure the WiFi problem with the XDA IIi, and I can now connect with ease.
Ok, I might as well add my question to this thread, as it's relevant.
I have an O2 UK XDA2i, and I've also experienced similar problems connecting the wifi and managing to get it to work properly.
I'm at Uni in Birmingham, and at some of my faculties there's wifi for students and staff to use - they give the broadcast SSID UCEOpenAccess, and you use your system logon (in my case STUDENTS\F05310011 and my password (secret ).
I have these details set in the LEAP tab of my wireless lan config (in the WLAN settings) - I have an entry named UCEOpenAccess, and I have my username and password (and domain) set correctly, and the auth type set to Open System (as opposed to EAP, doesn't seem to make any difference whatever I set it to)...
... I just can't connect to any wifi network! I can't even _SEE_ the wifi network, and I know it's there, I can pick up other wifi networks and detect them using Wifi Graph and Hitchiker. I just, bizarrely, can't see the one wifi network I'm trying to connect to.
It's incredibly frustrating. I have my network adapter set to connect to Work (as I've seen advised on these forums), and my IP is assigned via DHCP (they use a weird class b subnet for their network), and the proxy to connect to the Internet is also setup correctly in my Network (This network connects to the Internet checked, This network uses a proxy to connect to the Internet, and proxy is specified in the box), and as the proxy is a SOCKS 5 authenticating proxy, all the relevant details and username+password are in place in the Advanced settings.
Still doesn't work!
Is it due to my original (and decrepit, from the looks of things) firmware and software versions? I'm running original radio, is that a problem maybe? I've scouted about quickly for updates from O2 for my XDA, but I don't want to install a Japanese update as I don't reallllly want to have to read Japanese (and I can't, etc) - I don't want to make a brick out of this brand new phone, but the resources for total xda newbs is somewhat lacking. Can someone just poke me in the right direction with a stick?
Cheers all.
With my QTEK S200 (QREK ROM) it takes considerably longer to connect to my wireless network than it took with my old WM2003 PPC. The good old IPAQ connects in about 2 secs while the new PPC needs about 20 secs, even when I am sitting next to the router. When finally connected everthing is fine and quick.
When I am to far from the router it does not connect any more though the connection stays active when I move with already existing connection to the same location in my house.
Is this normal???
Thanks for info.
My S200 connects instantly to my Belkin router. I can surf the internet straight away. However, if I want to browse my network or stream video from my pc is seams to take an age to connect. My pc is pretty lowly spec'd so that may be the problem, but once I'm connected then browing/streaming is fine.
Sometimes this is due to the way WZC (Windows Wireless Zero Configuration or Windows Zero Configuration) acts up on the Pocket PC...
If you have been connecting to several hotspots besides your own, you've been collecting Wireless configuration settings, and everytime you try to connect, WZC have to go through all of them until it finds the the correct access point on the list and matches with the actual physical Wifi hotspot, then and only then, it connects.
If you want to avoid this, you can click on the connecting arrows indicator on the top of the screen and then Comm Manager, then Settings, then Menu, and then Network Cards. Then you will see the Wireless Networks list.
Notice how it will cycle through all of the items until it finds the correct one and connect. Well, sometimes under some circumstances it can skip and go all the way through the list again.
The quickest way will be to just hold your stylus over the one that you know is the correct one and select Connect.
That's it and I hope it helps.
Best regards,
Rayan
Rayan said:
Sometimes this is due to the way WZC (Windows Wireless Zero Configuration or Windows Zero Configuration) acts up on the Pocket PC...
If you have been connecting to several hotspots besides your own, you've been collecting Wireless configuration settings, and everytime you try to connect, WZC have to go through all of them until it finds the the correct access point on the list and matches with the actual physical Wifi hotspot, then and only then, it connects.
If you want to avoid this, you can click on the connecting arrows indicator on the top of the screen and then Comm Manager, then Settings, then Menu, and then Network Cards. Then you will see the Wireless Networks list.
Notice how it will cycle through all of the items until it finds the correct one and connect. Well, sometimes under some circumstances it can skip and go all the way through the list again.
The quickest way will be to just hold your stylus over the one that you know is the correct one and select Connect.
That's it and I hope it helps.
Best regards,
Rayan
Click to expand...
Click to collapse
Thanks for explanation. I tried to remove 1 out of only three configured networks (as I need the other two!) but this does not seem to have any impact. Do you think the Wireless chanel used by my WLAN router has any impact?
hase01 said:
Rayan said:
Sometimes this is due to the way WZC (Windows Wireless Zero Configuration or Windows Zero Configuration) acts up on the Pocket PC...
If you have been connecting to several hotspots besides your own, you've been collecting Wireless configuration settings, and everytime you try to connect, WZC have to go through all of them until it finds the the correct access point on the list and matches with the actual physical Wifi hotspot, then and only then, it connects.
If you want to avoid this, you can click on the connecting arrows indicator on the top of the screen and then Comm Manager, then Settings, then Menu, and then Network Cards. Then you will see the Wireless Networks list.
Notice how it will cycle through all of the items until it finds the correct one and connect. Well, sometimes under some circumstances it can skip and go all the way through the list again.
The quickest way will be to just hold your stylus over the one that you know is the correct one and select Connect.
That's it and I hope it helps.
Best regards,
Rayan
Click to expand...
Click to collapse
Thanks for explanation. I tried to remove 1 out of only three configured networks (as I need the other two!) but this does not seem to have any impact. Do you think the Wireless chanel used by my WLAN router has any impact?
Click to expand...
Click to collapse
I've heard that some people have some problems connecting to some brands of Wifi routers... I use a Linksys WRT54G without problems.
Try to get into your router's configuration panel and set it to connect only to 802.11G devices (it's in auto by default).
Also try different channels (sometimes even neighboruring wireless or home appliances like wireless telephones interfere).
It doesn't hurt to try to reconfigure your access point's wap key, or even try to set it not to use a wep key so you can try it.
Good luck!
Rayan
Hello all,
(Skip down to question if you don't feel like reading.)
I recently purchased my 8125 (almost brand new) from my boss, he had it for a week and didn't like it so he sold it to me for $100.
Please do not yell or flame me for this very n00bish question. I would appreciate it if you would read the entire post before yelling at me.
Yes, I have scoured the internet for solutions that are not quite specific to my issue.
Here is my network setup.
I have a Linksys WRT54G that any computer can connect to wired or wirelessly. However my 8125 can see every wireless 802.11b network. (I haven't modded it for G, yet.) I can walk around the mall, school, work, my house and see every wireless B network. I can even input the WEP security keys. The issue is I can not connect to the wireless network(s).
Here is what I have done to try and resolve this issue:
I first tried configuring my different connections, "enable for internet use", "disabling mediaNET Proxy", set up a new connection. None of those work, I always end up connection to GRPS for the internet. I
I have discovered that I can not connect to wireless network, with encryption enabled or disabled. I have tried a hard reset with to no avail.
So to simply state it for my first set of problems are,
I can not connect at all to a Wireless Network, I can see it but can't connect and every solution I've found out on the web has not helped.
Can you all please give me suggestions for help?
I'd also appreciate it if you would list everything step by step.
Thank you all very much in advance,
Duo
u have a tweak that has GRPS always on enabled.
I have the same Linksys AP as you and operate without any problem. What version of software are you running?
does it still not work with WPA turned off?
I have discovered that I can not connect to wireless network, with encryption enabled or disabled.
Click to expand...
Click to collapse
Sounds to me like your having "regular" networking issues rather than wireless specific ones.
If you go Start -> Settings -> Connections -> WIFI -> Network Adapters Tab -> From the list pick the one that has "Wireless Adapter" in the name and click on it. On mine it's called "SDIO WLAN Wireless Adaptor". Should be similar on yours
NOTE ON ABOVE: I have WM6 and if I recall some of the names of the control panel icons are different. I don't think it was called WIFI in previous versions. Root around for one which has the "Network Adapters Tab".
There you will find your IP address settings as well as your name server settings. (Both tabs). Make sure that the IP is set to "User Server Assigned IP Address" is set. Then go to the Name Server tab and make sure they are ALL BLANK. Nothing in them at all.
My suspicion is your boss changed these settings. Have a go anyway.
any problems following those bad instructions get back to us!
Lewis
Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Doubt if this is an issue with the phone more likely to be a setup of the wireless.
What router do you use?
Do you have MAC Filtering enabled?
Do you use your router as a DHCP server?
Are there any error messages displayed on the phone?
When it doesnt connect and you tap the notification area (top bar to the right of START) do you have any messages there?
jderonde said:
Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Click to expand...
Click to collapse
I too had problems with WIFI. My home work network was visible but it would immediately drop or not be able to connect. A few days later it started working flawlessly and I have no idea what changed.
I am sure you have tried a soft reset but just in case...
Tony
I have a NetGear DG(Some Number) v4 ADSL wireless router, which i have set up and works for all of my other devices (ie. Laptops, PS3). With a simple encription key.
I get no messages etc, all it sais is that its 'not connected' and there are no new notificatons
It then persists in trying to connect again and again, when it cant connect for a while, it then comes up with 'new network connections found' in the notificatins area.
I have switched the power mode to best performance with no luck.
I have tried on 2 different networks now. including with all encription off. WEP and WPA-PSK - This is driving me nutz cuz i love the phone, i just want to use it to browse the web without paying out the nose for it.
DHCP server is dynamic from my ISP.
I have contacted HTC now about the issue, but im going to feel so stupid if it turns out to be somthing simple like a setting on the phone somewhere.
But thanks for the reply
Have you checked you arn't using MAC filtering?
Log-in to your router and check under Wireless settings > Wireless Station Access List.
While you are on your wireless setting page check what Encryption your using for WPA-PSK? TKIP? (The wrong encryption chosen will cause you not to be able to connect)
Ok maybe telling you how to suck eggs but on your phone:
Settings > Communication > Wifi
Select Advanced at the bottom right.
Select Change Network
Click Add new...
Type in the name of your network (The SSID also found under wireless settings, Case sensitive)
Select Connects to: The Internet
Leave the other two boxes unticked.
Click next.
Select the correct Authentication - WPA-PSK is different to WPA2-PSK. You will probably be using WPA-PSK.
Select the correct Encryption (Propably TKIP)
And type in your Network Key
Click Next and Finish.
How does this fair and what are the results of checking info on wireless setting page?
Im at work at the moment trying to connect to the WEP connection,
This connection most deffinatly does not have mac filtering on it, just asked the network tech.
Okies.....
Changed the network key to.... Shared key and it works
so i am guessing that it must be somthing to do with my setup at home..
Cheers guys
Cool.
Just match up the Authentication / Encryption / SSID and Network Key from the router to your phone setup and you should be fine.
HTC TD2 Wifi issues
Hi
There's some discussion around the web about this problem of encrypted wifi connectivity: a few things to note
1] the TD2 is _very_ sensitive to the power settings applied to the wifi chipset.
The default power saving settings are only likely to work if all other on-board devices - bluetooth, HSDPA, GPS [and maybe even the screen] are either off or in low power mode: the general recommendation seems to be that one adjusts the wifi device power to be "best performance" if one wants to guarantee connections.
2] several people have reported that both the wifi device [card] and the settings for the particular wifi lan [SSID] to which you are attempting to connect should both be configured for "Work" rather than "The Internet".
3] these secured/encrypted connection failures are not about the WiFi access point or router: I've personally tested with several different makes and models of Router and Access Point [3com, Cisco, Enterasys, Netgear, DLink, Belkin etc] - both on my own and on client networks where I have complete control of security, and have also methodically tested every single combination of TD2 setting for WEP and all variants of WPA. In each case my TD2 has failed to make a valid encrypted connection.
The same device will happily connect to "open" unencrypted access points and routers.
Other models of HTC device, such as the Tytyn II and Touch Pro work fine on the same access points and routers: so we can be pretty sure that this is specifically a TD2 issue.
Conversations with HTC's European Tech Support on this issue have not been helpful to date, but they HAVE pushed the issue further up the line, so there's a chance that we'll see a resolution.
Robert
hello help,
my wife has an htc hd2 phone and i am trying to connect it to our home network. we have an mn700 microsoft router. i have security on it WEP
and on channel 3. The phone is asking for a network key and i put in the wep key and and put it on channel 3 it
states that iam connected but we still can not surf the web.
all other wireless computers and laptops in the house i have assigned a
static ip, i oculd give her phone a static ip but i can not find where or how to do this on htc hd2 phone.
i am thinking that this is the solution, if not please point in the right direction.
also ineed step by step directions on the phone since it is not mine i do not know to much about it.
thanks,
craig
I'm right there with ya, exact same problem. It's amazing to me that a device as sophisticated as this is so difficult to set up. Here are my posts from the t-mobile forum..PLEASE HELP...
I just got my htc hd2. So far I love it. my last phone was a G1 and it was able to automatically switch to my home wireless network when I got in range. Is this possible on the hd2? Also Is it possible to set a static IP address for these devices? I have not been able to get it to work on my LAN. If anyone can give me a walkthrough to set the phone up so It automatically switches to my LAN with a static IP when I'm in range this phone will be pefect...wife just got the cliq xt and she's teasing me... TIA
can anyone tell me how to set a static IP address and how to get it to connect over my LAN. I called customer care and the person i spoke to only had a set of written guide lines and couldn't tell me how to do it, said he had never been asked before. So, Here's what I've done so far to get this device to work with my wireless at home. 1st, Click START > SETTINGS> Wireless Controls and turn Wi-Fi on. It sees my Wireless network and the icon spins to let me know it's attempting to connect? I've put my network password in before so eventually I get a green check mark. So next I tap Advanced in the lower right corner and get to the Wireless Lan page. Then I tap the Change Network button which again lists my wireless networks in range and mine is listed as connected. so then I click the Network Adapters Tab, which brings me to my first question. What should be the setting for "My network card connects to:" I assume "The Internet" but I could be wrong. Below is a long list of adapters I can modify, which brings me to my next question which adapter do I modify? I assume the Broadcom 802.11 Network Adapter, when I tap it I get a screen where I can set a static IP and DNS. I figured I had it at that point, except It doesn't seem to work!. The wi-fi antenna icon is at the top and I have two arrows next to it pointing left and right. green check on my wi-fi network, but when I try to use Opera browser it says ERROR! Connection closed by remote server and I cannot ping the ip i set in the device from my network. I go back turn Wi-Fi off and everything works again. AM I DOING ANY OF THIS RIGHT? thanks again.
Okay, got it to the point to where I can ping the device on my network. The adapter I had to set the static ip to was the Broadcom 802.11 DHD Network Adapter. Using Wi-Fi toggle to turn it on and off and it responds well and connects reliably. However, when I try to browse it fires up the 3G connection. I have just now been able to use remote desktop on my local network using the servers IP, without it turning on the 3g connection. Looks great in 16bit color, but no landscape mode? Most other apps, facebook the browser and others make the 3g connection come back on. How can I make all data connections go over my lan? almost there....
I got it to work, not sure if this is best practice or not, and it's definitely not elegant, but it works.
1. Touch Start > Settings > Wireless Controls and Turn wi-fi on
2. Select your wireless network and enter your password or key
3. Once you are connected (green check), touch Advanced > Change Network (under the ssid) you will see your wireless connection again and it should say connected
4. touch the wireless adapters tab at the bottom. Here at the top select my network card connects to The Internet and select your wireless adapter from the list below.
5. set your static IP address and Name Server info. Touch OK and then return to the home screen
At this point you should have the wi-fi icon with two solid arrows next to your 3g icon.
6. Touch Start > Settings > menu > all settings > connections > connections > advanced tab > Select Networks.
7, change both drop downs to my isp (may be different if you named it something different)
to get back to 3g repeat steps 6 and 7 to switch both dropdowns back to tmobile data or whatever yours was originally and turn off the wi-fi (or download wi-fi toggle) and turn wi-fi off. 3g should come back on automatically if you run an app that connects to the web. if not turn data connection back on in the comm manager.
This works but this sucks. Is there an easier way to Automatically switch between 3g and wi-fi? Am I making a simple problem over complicated? or is there and app for this? Android beats winmo 6.5 on this one.
still no wifi
hello,
trying for days, i can not get your setup to work. still connected
but no internet browsing. i took the same ip that i am using for the phone and put it on the laptop---so i know it is the phone and not anything going on
with the router.
craig
To the OP, i am by no means an expert on this topic. This is how i got mine to work. only advice i could give is to make sure you are editing the correct adapter and if you named your connection settings something different double check. How far do u get with the instructions? do you get a green check after you put in your network key?
I can switch back and forth between wi-fi and 3g no problem but it would be nice to have it done automatically when i'm in range...can anyone help
finally
we reset the phone and then followed your directions. Viola! it worked!
we are working on how to setup identies for different networks,
thanks again mr1credible.
Update. My phone locked up hard and kept telling me my password was incorrect so I had to do a hard reset...After the reset, I decided to take another look at the Network settings..I've got it set up now so that All I have to do is turn wi-fi on and it will use my wi-fi as the preferred connection. All I did was follow steps 1-6 as previous except when I got to step 7, I only changed the second drop down to My ISP. Both Icons 3G and Wi-Fi appear at the top but I can remote desktop my PC and connect to my shares on my local network. I also have it set to automatically shut off my wi-fi if it cannot connect in 30 sec, So when I leave for work in the morning I don't have to remember to shut it off, and I don't have to switch back and forth between settings anymore. All i have to do is turn wi-fi on when I get home. Not bad. Still would like to have it automatically detect my network and connect when in range but I can live with this....
Try SolarWinds Orion IP Address manager.
It Manage your entire IP infrastructure from an intuitive web console .
Also it Prevent your subnets and DHCP scopes from filling up with preventative alert notifications .
check it at
SolarWinds website.