Here's an example of measurement GPRS using ril and some instructions posted by benclewett.
As I am a newbie in eVC (and in VC too), my code is very poor, but It works!
Does somebody has a better example or a dll made with it?
Thanks!
Hi,
Interesting - what does this do?
Does it measure data transferred (which is what i'm looking for!).
Where did you get it?
Thanks!
--ian
Hi,
I can't seem to unrar it - all the files seem to fail - has anyone else tried it?
--ian
Works for me, using WinRAR 3.41
Hi,
Ah, ok - thanks.
Have you tried the code then?
Does it work?
What's it do?
--ian
Haven't tried the code, since I don't use GPRS. I didn't choose a data plan when I bought the phone, and Cingular charges more than I want to pay for data.
Related
hi after upgrading my systemrom to the current T-Mobile German the mentioned systemmessage comes up regulary all ca. 5 minutes. - does anyone knows the problem and how i can get rid of it? the strange thing is that it seems the message has nothing to do with the actual condition of the data session. - cause it appears without having established such a session yet (e.g. after soft-boot).
i have no special software installed (only skype, sdk-tools, gprs-monitor, resco file explorer and adobe)...
please have a look at the attached picture and
thanks for any helping answer...
I tried to activate Microsoft Reader and can't make it work. It keeps showing a message that said that I need a Pocket PC 2000 or higher. I have a Cingular 8125 with 2.25 ROM and Wolski Tweaks.
Can some one help me read my books on my Wizard?
Thanks
Diego
You're missing a file on your PDA: OEMinfo.xml
This file should be in your /Windows directory.
It has something to do with OEM's. They have to provide this file, but they lack to place it on the device. (As it was missing on my i-Mate K-Jam)
If you're missing this file, you can contact MS reader in the US:
[email protected]
Mention your device, and they will send you the correct file.
(But you can also lend it from another device which has the file :wink: )
Thanks for the reply. I contacted MS and asked for a copy of this file but I don't know how fast are they going to answer. Can you send me a copy of this file?
Thanks
Diego
Normally they are pretty fast, within 2 working days.
If they don't, contact me, and I will find one for you.
I am a little reluctant to send a file, because I don't know if that's your device id.
As you might know, you can only register the same device a few times, and if you start using my id...... I might fool myself in the long run. :?
Maybe this can help you temporarily. Convert you LIT, then no need for activaiton.
Hi Guys,
I've been lucky enough to get hold of a HTC 630 (or Cavalier i think its code named).
At present I want to utilise the Wifi as much as possible and have been hunting around for suitable Wifi programmes.
Wifi Fofum on aspecto looks a very good product. Can anyone give feedback on the software and its reliability? i.e. Can I expect regular crashes or loss of data etc etc.
Any feedback / suggestions will be greatly received as info on this device is pretty non-existant.
Many thanks.
Wififofum is good I use it quite often though on an HTC TyTn. Problem is that although it shows you either a list of networks around you or a nice radar screen - it is a bit limited beyond that. It's free and runs smoothly though. Another free one is Hitchhiker and this provides you with a chance to connect to networks/hotspots etc. Also takes some of the hassle out of setting up the connection. It's also free. It does need the .net framwork 2 installed but their site has a link to install that as well:
http://www.kasuei.com/hitchhiker/
And for a variety of the more serious network tools I recommend the Cambridge Computer Corporation - e.g. Vxipconfig
see here:
http://www.cambridgevx.com
Mike
Trouble downloading
Hi Mike,
You helped with a query on wifi and pointed me in the direction of hitchhiker whick looks excellent. However I can't get it to download. The installer goes on my PC fine but I can't do anything with the CAB files.
Am I right just going straight for ver 0.4 and none of the prev versions? I don't know if I'm doing it right by downloading the installer first.
My active sync tells me that the installer is primed to be transferred on next connection, and it does. Buts thats about as far as I get. The icon appears on the 630 but no data must be in there.
SOS!
Cheers
madrobo said:
Hi Mike,
You helped with a query on wifi and pointed me in the direction of hitchhiker whick looks excellent. However I can't get it to download. The installer goes on my PC fine but I can't do anything with the CAB files.
Am I right just going straight for ver 0.4 and none of the prev versions? I don't know if I'm doing it right by downloading the installer first.
My active sync tells me that the installer is primed to be transferred on next connection, and it does. Buts thats about as far as I get. The icon appears on the 630 but no data must be in there.
SOS!
Cheers
Click to expand...
Click to collapse
Does Hitchhiker get listed in your programmes? And if sowhat happens when you open it?
With cab files you transfer them unopened/unextracted to your device and open them on the device.
Mike
trouble
Hi Mike,
Sorry for the delay in replying. the error message I get is as below. At present i've got windows mobile centre on vista home prem. The PC picks up on everything on the device and lets me just copy and paste the file over but the following message appears:
Hitchhiker.exe
notsupportedexception
at microsoft.AGL.Common.MISC.HandleAR()
at
Microsoft.Windows.CE.Forms.InputPanel..ct
or()
at
Kasuei.PocketPC.Wireless.Hitchhiker.MainForm.InitialiseComponent()
at
Kasuei.PocketPC.Wireless.Hitchhiker.MainForm..ctor()
at
Kasuei.PocketPC.Wireless.Hitchhiker.EntryPoint.MAIN()
Any assistance would be appreciated.
copy the cab to the phone and run it using file explorer. Dont try to open the cab or the exe on your pc.
hitchhiker download problem
hiya
yeah thats what ive been doing. cutting and pasting it straight onto the device after saving the cab to my docs on the pc. i've been saving it straight to the mem card and trying to open it in file manager.
just the same as games and stuff i've downloaded and they are fine, playing no probs.
The error message above is whats displayed on the device when i try and open it. i'm sure ive got the correct ver of the net framework on the device.
Any suggestions?
Ta
madrobo said:
hiya
yeah thats what ive been doing. cutting and pasting it straight onto the device after saving the cab to my docs on the pc. i've been saving it straight to the mem card and trying to open it in file manager.
just the same as games and stuff i've downloaded and they are fine, playing no probs.
The error message above is whats displayed on the device when i try and open it. i'm sure ive got the correct ver of the net framework on the device.
Any suggestions?
Ta
Click to expand...
Click to collapse
Can't fathom out the problem. Some suggestions for what they are worth:
The Hitchiker site has different versions available - could try uninstalling and try another one.
The Hitchhiker site has a .netframework checker on a link near top of page - could install checker to ensure you have correct version.
Failing this you might need to contact Kasuei with the error message you get and see if they can help.
Mike
Hi IT people,
Handy Sniffer v2.0 has been released! It is cardinally altered.
11 protocol parsers are included and now anybody can develop new packet analyzers (.dll).
Unregistered version has a little restrictions but has no trial period.
You can find the program and module sample on our site.
http://winm-soft.atspace.com
Good Luck!
Great Release
Congratulations Alex, you managed to make cellular trafic capture, it's great news! Sorry that i didn't replyed to you about 1.6 but I had some personal problems that time. Anyway when we might expect WM5/6 version?
HS2 is specially designed for WM2003, WM5, WM6 and maybe smartphones (not tested). If there are some artifacts, ect. write me about it. I have WM5 and WM6 devices and HS2 and EDh work well. Play it! It is very great If anybody makes some additional protocol parser. Any ideas? Maybe some Instant Messenger protocol?
One more sample module
This is a sample module that can process each packet captured by sniffer. It replaces the main program module ("modules\hs_ether.dll") and calculates some Rx statistics. Maybe its source can be interested for somebody.
The link not work, now!
I clicked the previous link and all is ok. Copy is here.
Greetings AlexB,
I downloaded your program which sounds great. I installed the SDK certs and tried to get hsniffer running but it fails with an error message:
"Cannot activate the driver!" and then quits.
I'm using a HTC Kaiser with the latest official WM6 ROM from HTC.
If I start the program a second time, it starts without this error and if I click File->Tools->Adapters I get my adapters listed. Trying to start a capture generates the following error message: "Cannot get adapters list!"
Any hints? Did I miss something?
Hi c0rnholio,
I do not know why on some devices the sniffer cannot load the driver module (Windows\hsdriver.dll). The error 2 happens (ActivateDeviceEx, GetLastError, ERROR_FILE_NOT_FOUND) and next you see "Cannot activate the driver!". After this message the program works (you can open sample files) but cannot perform sniffing functions those need driver functionality. I think after this message the main window was behind and after next run you simply bring program window to top.
If anybody knows what causes such driver loading error I will be grateful for help. The program and driver are signed with SDK privileged certificate and it unfortunately does not help... **** happens.
Fixed it. The problem was that a GPRS connection was already established. After closing the existing connection the driver could be loaded and everything is working fine.
It is VERY strange! OK, if anybody ask me why HS does not work I'll say ask c0rnholio how need to do...
Hi,
i'm trying the new Handy sniffer into my TouchHD (Blackstone) but i can only get ARP packets (which are broadcasted). I also installed sdkcert as site advice, but nothing changes.
Alex, can you write down a list of devices which can capture in promiscuous mode?
In particular, how about Trinity and Blackstone?
Thanks!
sorry for my ignorance but what is the purpose of this? can i connect using gprs for free?
No, it's not for that purpose.
Handy Sniffer "Sniffs" (listen to) the traffic into a network. If working in "promiscuous mode" it can track down (and show to user) all the traffic (data in form of TCP packets) inside that network.
What's is supposed to?
There are many uses for this kind of tool, some legal and some ... "not legit".
While "sniffing" traffic of a given network, you can detect if someone is doing a unrightful use of the network, if an intrusion is being made, but also you can see passwords and other sensible data (like personal data).
It's like having a big hear cabable of listening network traffic. By itself, it can do nothing. It's up to the user to be capable of understanding packets of captured traffic.
So, forget a "stole the passwords" button. You'll not find it
woring with the HD2?
Hi, I have the HTC HD2, and I want to know if it was working with my phone?
I have actualy tried it, but the result was not good... (I only get ARP...).
thanks for any help
good for you guys, with my the HTC Kaiser I don't get anything...how do you do/set up the program
Thanks,
DOMy
Hi,
This is my first post and hopefully it may be helpful.
I have created a nice solution in order to run both UpToDate and Internet Explorer 6.
This solution was originally posted in this thread, but as long as this may not be visible, I have started a new thread
What you will NOT need
1) You will not need Fix UpToDate by doctorcete.cab
2) You will not need to cook your own rom
What you will need
1) Fix IE.cab
2) The files, which are attached at the end of this post.
Instructions
There are 2 different versions.
Version 1 - Best - If you use MortScript
1) Use the two .mscr files.
2) Each of those files contains a registry modification and after that it executes Uptodate or IE respectively.
Be careful: If you installed UpToDate in a different location than the default you should manually open and edit the file UpToDate.mscr and replace "\Program Files\UpToDate" with your installation pathway. (You can use Notepad to open the file)
3) You can use these files to launch the applications instead of the default shortcuts.
2nd version - If you do not use Mortscript
1) Use the 2 reg files
2) Before opening each application, run the corresponding .reg script
3) Files are universal independent on your installation location. Therefore no change is required.
I hope you enjoy.
Step2p
I can only launch it trhough mortscript then, not the default shorcuts right? or am I missing something?
@doctorcete
You should build new shortcuts pointing to mscr files.
If you want to have also the correct image on those shortcuts, you can download the file attached.
UpToDate shortcut will only work if it is installed in the default location (/Program Files/UpToDate)
If you have another installation location, you should manually edit the shortcut and fix it accordingly.
EDIT: If you want to use these shortcuts place the mscr files in folder "/Program Files"
Step2p
I don't want to hijack this thread, but has anyone been able to find a hack to increase font size within UpToDate?
good work step2p, it works alright with the shortcuts, congrats!, im very happy uptodate is finally getting some attention (after 6 or 7 months since the problem was discovered). Thank you!....
Fix UpToDate by doctorcete.cab
Dear All,
I still prefer to use Fix UpToDate by doctorcete.cab. I don't like IE6 any way. The simple solution is to run Fix UpToDate.cab. You can set Opera as you non-default browser, and Opera still works fine.
so what does this do? use PIE as the manilla internet browser???
what i imagined it would do is make PIE better with zoom, so might be able to zoom a bit better and it might be a bit faster? can anyone explain to me please?
Thanks
UpToDate is an Electronic Medical Database for Medical Drs
If your are not a Medical Dr. You don't need to read this thread
good job... it works nice.
Good evening to all,
I know this is not the appropriate thread to post this but i do hope to get some help
I have installed a trial 17.2 on my pc.does anyone knows which file is held responsible for expiring the trial version in the registry?
cheers
V
how can i check the version of IE?
Don´t mind the version of IE. If UpToDate works out of the box (without any hacks) then you do not need this. If it doesnt work. Follow the steps as described above on the first post, Then it will work.
great work guys. any way to have finger scrolling work?
Hey,
Just wanted to say that UpToDate works perfectly without needing any fixes if you access it through a proxy connected to your medical school, assuming that's an available option. It doesn't work using opera but does with IE, including zooming, etc.
well that's if you use an internet connection be it a data connection or wifi. this discussion is about uptodate completely on the phone (flash card) requiring no internet. thanks though
goldsfool said:
Hey,
Just wanted to say that UpToDate works perfectly without needing any fixes if you access it through a proxy connected to your medical school, assuming that's an available option. It doesn't work using opera but does with IE, including zooming, etc.
Click to expand...
Click to collapse
yooeee said:
well that's if you use an internet connection be it a data connection or wifi. this discussion is about uptodate completely on the phone (flash card) requiring no internet. thanks though
Click to expand...
Click to collapse
Oh, I assumed it still connected to the internet to access some kind of database. So this program alone contains ALL of the information that's available online!?? That's pretty amazing if it does, especially if it updates with new articles. I'll have to look into this now...
Yeah, it's huge >2GB. If you subscribe, there should be an option for them to deliver a DVD to you for you to use with your Palm/Windows Mobile device. UpToDate updates periodically, currently it's version 17.2. Articles are not updated on a rolling basis, but rather in increments corresponding to new versions. The flash card version actually does not update automatically. So whatever version you initially received, it'll remain that version with the same articles. The only way to update articles is to get the new version. Fortunately, the updates do not occur that often and medicine doesn't change drastically between versions.
goldsfool said:
Oh, I assumed it still connected to the internet to access some kind of database. So this program alone contains ALL of the information that's available online!?? That's pretty amazing if it does, especially if it updates with new articles. I'll have to look into this now...
Click to expand...
Click to collapse
many many thanks to all of you
thank you doctorcete ur fixes worked on omnia
and after applying the fixes I've downlaod this file
XDA WM 6.1 P.I.E for WM6.cab
now uptodate17.1 works and I.E 6.1 works
Ok, I haven't gotten this to work. I'm not quite sure what to do with the files. I'm using a Sprint Touch Pro. I placed both files in Programs/Mortscript. I can get everything up, but when i go into the drugs and press headings, it freezes. Any advices?