Windows Mobile 2003 HTTP download 4 ALL (exe) - MDA, XDA, 1010 Software Upgrading

Hi Guys,
Just to say THANKS to everyone out there, not only the developers but the normal mortals too - who put in effort to help people here.
I have uploaded the Windows mobile 2003 to my site. Its on a super mega link (great words ) I get 1meg a sec+ when i download from it at work !
http://www.ali.nildram.co.uk/xda/
Cheers Guys

OK it's seems to upgrade the Radio any issues? What if I upgrade the radio to ATT's? Ideas thoughts anyone?

Salam
Thanks Ali-Butt
Othman

since phone upgrade i have noticed that gprs is a tad faster. 8)

Does it support Sim Tool Kit
Hi Ali,
Does this upgrade have the sim tool kit?
Thanks in advance :?:

isn't this the same version everyone has been using?

I just have to run the executable file right? I don't need an SD Card writer or anything for this download? just my normal connection and activesync? what if the upgrade screws up? can i reload the old ROM image? and where do i get it!
Thanks a lot!

hi from Riyadh
Hello again
well, what i have notice there are more then one version of WM2003
one of them which i downloaded from http://members.lycos.co.uk/xdarom/ where i couldn't downgrade using the nornal method and i was force to use SD Card to go back to my previous ROM but the other version which i downloaded from this FTP Server 195.64.88.44 xda/xda works pretty good and i was able to downgrade to XDA-Developers Special ROM version 1.2 with no problems and without using SD Card.
thanks again for sharing
Othman
http://www.pocketpc4arab.com

Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,

I upgraded my XDA last night via my USB cradle. I had NO problems at all. Took a little longer than normal :?: But other than that it was fine.
Gil

Gil,
did you use Ali file uploaded on his site ? Is your XDA UK or Asian version ? Which nr ?
Thanks,

no service
Can someone help a newbie out here - I installed the WM2003 no problems and then installed to 4.21.00 radio stack
but now my phone get's no service any ideas? Im in Texas on T-mobile

Please, see this link may be useful for you
http://xda-developers.com/forum/viewtopic.php?t=1687&start=75

brix3 said:
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
Click to expand...
Click to collapse
I had the same set upwith yours previously. I upgraded to SER 1.2 and WM 2003 after that. I also upgrade my radio stack to 4.21 from O2 UK. But now, I am back with SER 1.2 and Radio stack 4.21. I wish Icould go back to my old Radio Stack 4.17.
With 4.21 Ilost the "G" and signal strength for GPRS.
I hope my experience helps.

Beeheij, why didn't you keep the 4.17 radio version with WM2003 ? Was it not running properly ?
I think it's always dangerous upgrading the radio module with newer version dedicated to other regions (UK)
Thanks,

brix3,
I want to back to 4.17, but I cannot. Somehow during the process of rolling back I was kicked out.
As for the WM2003, the problem was in the SMS mode. When I picked a phone number, the "+"sign in my contact was not transferred tothe address in the SMS. So each time I wanted to send SMS, I had to correct the phone number.
My Battery Pack was not working. It hung my XDA.
Hope this helps

Has anyone in the US used or done this upgrade? Since it also upgrades the Radio Stack I'm just wondering. If GPRS is getting dropped as stated in other posts it is more that the network drops you or you lose data connection between cells, or the network has a load balance that give placement to voice users over data when bandwidth is needed. Not so much that your radio stack does it.
On the other hand just incase anyone wants to prove me wrong :wink: who in the US has upgraded their radio stack to O2 4.21 and experienced a better performance than AT&T's radio stack (speed stability as staed on their website) :?: This means you probably already had to manually switch the default band 8) first, right? :x
Let me know I love to be wrong :shock: ......I'm only that much smarter than I was yesterday :roll: :lol:

I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-

i must admit this version of ppc2003 is the dogs danglys compared to the old ozone version

Phoxie_Phreak said:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
Click to expand...
Click to collapse
as far as i know XDA v1.2 will not touch your Radio, it will just replace your old CE ROM with the new one which has lots of cool stuff.
regards
Othman

Related

Help

Hello.
As a new xda user I have been reading up on flashing my machine to the Windows Mobile 2003 Pocket PC Phone edition. I am trying to find out if every rom will work on my phone.
I have an 02XDA
Bootloader 5.17
Rom Version 3.14.17 ENG
Rom Date 10/11/02
Radio version 4.17
Protocol Version 32s54
I was looking forward to updating it to the new version but o2 Asia (I assume my xda is the asian model) says that an upgrade is unlikely.
Can I update it with one of your roms or possibly the WM2003?
Thanks.
Yup, you can upgrade it, and anyone should.
If you asked me two days ago you would get a negative answer. But last night for the second time I upgraded my XDA again to WM2003, and very very happy with it. Specially the telephone and SMS facilities.
When I upgraded first time last week, I was not happy at all, my application programs somehow hang the XDA, most probably Battery Pack older version. Now I am using Spb Pocket Plus instead.
If you want to upgrade to WM2003, just make sure that all your application program can run in it. You cannot trust the signal bar, so I use an excelent program called IP Dashboard test it.
My old set-up was exactly like yours, and now:
ROM version: 4.00.01 ENG
ROM date: 05/16/03
Radio version: 4.21.00
Protocol version: 32S54
Help X2
Ok then.
To make mine look official, where can i get a proper copy of WM2003? I know its not officially endorsed or anything but I want it to at least look the part.
I'm one of these people who love having the newest look to their mobile and as its new I havn't put any extra programs on it yet. (Apary from the sms fix)
and how would I go about getting it and resoring it if the update failed. ?
You may not be able to get an 'official' copy of WM2003, but there are plenty of developer-releases floating around :wink:
Search the forums and read as much as you can and you will have your XDA upgraded in no time.
If I'm not happy with WM2003 can anyone tell me if it is possible to downgrade with the official Programme a/b that can be downloaded from the 02 website.
I downloaded it just in case I had any problems a while ago. Touch wood *knock Knock* It hasn't been a problem for me.
you can down-grade. the best way of doing it is to down-grade to XDA-developers v1.2 then to O2 3.xx
ian

UAE: Best Radio version?

First of all, I'd like to thank everyone who posts to this forum - I've been reading it for a month or so now and am constantly impressed with the quality of the knowledge here, especially the developers...
I have a QTEK 1010 bought here in Dubai, UAE, with the following device info:
ROM version: 4.00.01 ENG
ROM date: 05/16/03
Radio version: 3.23.01
Protocol version: 32S54
I have found that browsing using IE feels slower, and have the feeling that this version of the ROM does not work well with the radio version. Does anyone reading this forum live in the UAE? I'd like to upgrade the Radio, but need to know which version works best with Etisalat (our Telco).
Any comments much appreciated!
Thanks, Doms...
P.S. I'm going to upgrade the ROM to 4.00.05 when I get the opportunity
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Use the o2 Radio Version 4.21 it will work fine...
Thanks for the responses guys. Does this new radio version provide any benefits over the one I have?
kamiar said:
hi, i am from dubai and i am using 4.00.1 from t-mobile and 4.21 from o2, so far everything fine just when i reset the t-mobile logo appears.
do you have bluetooth option in that version and your version was already installed or you upgraded yourself?
Click to expand...
Click to collapse
1) The QTEK does not support Bluetooth, and there is no way to make it work on a QTEK either.
2) There is no Bluetooth option in any of my menus or settings (I would expect this as my device does not support Bluetooth). Windows PPC2003 is supposed to be able to support Bluetooth, however: http://www.microsoft.com/windowsmobile/products/pocketpc/about/2003/bluetooth.mspx
3) I upgraded to the 4.00.05 version of Windows PPC2003 myself using Jeff's ROM Kitchen (thanks Jeff!) http://cuba.calyx.nl/~jsummers/ROMkitchen/
Hi, Once i had 4.00.01 and in connection setting i had Bluetooth option but ofcourse it was not working, the other thing is do you know any camera work with SD port of Qtek? i mean something availble in the market.
4.21 is more stable i think.
cheers,
I had some problems when making calls on my QTEK yesterday. While in a voice conversation audible clicking noises can be heard and after about 1 minute of conversation the quality of the call deteriorates until the other party cannot hear me. I'll try upgrading the radio...
I don't know about the camera support using the SD slot in the QTEK. My first instinct would be to say no, it's not possible, but I can't confirm that...
I bought a Qtek 1010 in Dubai Duty Free the other week. I've since upgraded the ROM using ROMkitchen and am delighted with it. One thing I did notice though is that the speakerphone functionality (claimed in the Qtek handbook) doesn't seem to work. I didn't try it before I upgraded so can someone tell me if it works with the native UAE ROM code, and if so does anyone have any idea how I could get it working again?
David
I own a QTEK in the UAE and here is my share to those asking about OS and Radio updates here:
I upgraded from
ROM version: SER 1.2
Radio version: 3.23.01
To
ROM version: 4.00.10 ENG (T.Mobile Test)
Radio version: 4.21.00 (O2 UK)
Everyting seems to work fine apart from 2 minor issues so far:
Make sure you set your band to 900Europe as the default is 1900North America in phone/tools/options
The signal fades out sometimes but doznt affect the reception
No G signal but GPRS is OK.
GPRS stays connected; have to turn phone off and on to disconnect.
Advice:
Read a lot before you upgrade. This forum has a wealth of information.
Cheers
ridaz

Where i can find radio stack upgrade ?

Hi every one,
where i can find 6.18 radio stack for t-mobile ?
Is there any way to backup the radio stack from another t-mobile?
Thanks :shock:
balo said:
Hi every one,
where i can find 6.18 radio stack for t-mobile ?
Is there any way to backup the radio stack from another t-mobile?
Thanks :shock:
Click to expand...
Click to collapse
What ROM are you currently running!
I ask this because the 6.18 radio stack is part of the current T-Mobile 2002 ROM which can be found here:
T-Mobile Current ROM Update:
http://www.t-mobile.com/products/handhelds/pocketpc/downloads.asp
Will upgrade to this version:
ROM version: 3.14.40 ENG
ROM date: 11/26/02
Radio: 6.18
Protocol: 324e4
HTH
Is Radio Stack 6.24 compatible with the current release of 2002 for T-Mobile? If so where can one find it and information on installing it? I'm interested in getting the "always on" capability and tired of waiting for T-Mobile to provide the 2003 upgrade
Yes...
I would also really like to have a radio upgrade for my QTEK 1010 something along the line og 4.10 or 4.20 not 4.21.
Please help me.
I can't wait.
THANKS
jsteele said:
Is Radio Stack 6.24 compatible with the current release of 2002 for T-Mobile? If so where can one find it and information on installing it? I'm interested in getting the "always on" capability and tired of waiting for T-Mobile to provide the 2003 upgrade
Click to expand...
Click to collapse
Stack 6.24 is compatible but you won't get the "always on" capability until
you upgrade the ROM.
For the visit:
http://cuba.calyx.nl/~jsummers/ROMkitchen
As for the radio stack send me a PM with your email address and I'll
forward you a copy.
HTH
Qman said:
balo said:
Hi every one,
where i can find 6.18 radio stack for t-mobile ?
Is there any way to backup the radio stack from another t-mobile?
Thanks :shock:
Click to expand...
Click to collapse
What ROM are you currently running!
I ask this because the 6.18 radio stack is part of the current T-Mobile 2002 ROM which can be found here:
T-Mobile Current ROM Update:
http://www.t-mobile.com/products/handhelds/pocketpc/downloads.asp
Will upgrade to this version:
ROM version: 3.14.40 ENG
ROM date: 11/26/02
Radio: 6.18
Protocol: 324e4
HTH
Click to expand...
Click to collapse
Qman,
Do you still have the file?
The file from T-mobile website, no longer include radio upgrade.
Could you send me copy? My email [email protected]
Thanks
Ok you got it!
Hi Qman,
will you please send it to me too?
[email protected]
Thanks :shock:
balo said:
Hi Qman,
will you please send it to me too?
[email protected]
Thanks :shock:
Click to expand...
Click to collapse
Ok you got it! :lol:
HTH
FYI the zip file will include four files just copy them to your XDA's windows folder and run RSUpgrade.exe.
After the upgrade you can go back and delete RSUpgrade.exe.
HTH
Radio Stack Upgrade for Tmobile PPC phone
Hey Qman can you send me a copy of the radio stack upgrade as well. I am in the process of installing testing some of the beta builds of tmobile 2003 on my device and want to get a better working radio stack than I have, I have a generic one that is not working too well.
[email protected]
Rumors
I've heard a lot of people hosing their radio with the 6.24 update. I have 6.18 now. Is there a way I can back up my radio stack (using serial cable), go up to 6.24, and still feel secure with the knowledge I can go down to 6.18 again?
Thanks.
Radio Stack Upgrade, no problems
I just upgraded recently to the tmob 6.24 without any problems. Found the instructions for copying the four files directly onto the pocket pc and installing from there.
I've also downgraded that same way, there's absolutely no magic, apps, SD card crap, or anything required.
Both stacks worked without any trouble, the .24 having always-on and much much better luck getting a decent Internet connection speed.
Just my two cents. Those people that are so worried about downgrading and all these stories about the radio being hosed, I have no idea... copying those files right onto the pda always worked for me.
You downgraded from 6.24 to what 6.18?
If so send me a copy of the four needed files to downgrade back to 6.18, for my records. Because as far as I know/seen radio stack v6.18 was built-in the latest T-Mobile Pocket PC 2002 ROM update, hence no files!
But if you got them please send me a copy!
Qman said:
FYI the zip file will include four files just copy them to your XDA's windows folder and run RSUpgrade.exe.
After the upgrade you can go back and delete RSUpgrade.exe.
HTH
Click to expand...
Click to collapse
Hi qman,
will you please send it to me?
[email protected]
ritmo-unido said:
Qman said:
FYI the zip file will include four files just copy them to your XDA's windows folder and run RSUpgrade.exe.
After the upgrade you can go back and delete RSUpgrade.exe.
HTH
Click to expand...
Click to collapse
Hi qman,
will you please send it to me?
[email protected]
Click to expand...
Click to collapse
Confirming you're looking for Radio stack 6.24?
If so I can do that but if its 6.18 you're out of luck!
Can I also please get a copy of RSU 6.24? Thanks a lot.
[email protected]
daveeckert said:
Can I also please get a copy of RSU 6.24? Thanks a lot.
[email protected]
Click to expand...
Click to collapse
The Zipped files is about 1.28MB in size, I don't think Hotmail can
handle that, at least it didn't yesterday when I tried send it to someone
with an Hotmail account!

Which is a recent / suitable ROM and Radio upgrade for QTEK

Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.

xda2i rom help(andes)

hi i am new to this site i am having xda2i with following confg.
ROM version: 1.11.00 WWE
ROM date: 01/27/05
radio version: 1.00.00
Protocol version :1337.39
ExtRON version 1.11.171
model PH10c
now i have few question
1. i have read that xda2i cant be upgrated to windows 2005 is it true?
2.what is the latest version for xda2i and where i can downloaded it.
3. i have seen many people using radio verion 1.18,1.19 but i am using 1.00 can i upgrade my ROM version of my xda2i and which is the best radio version for xda2i keeping in mind signal reception,battery,voice clarity,bluetooth speed etc
hope i get all my answers
thanx in advance
regards majnnuu
no one to help me??????????????
Here ya go....
1) Correct. You can't upgrade your 2i to WM5.
2) I would recommend downloading one of pug's ROMs. You can find them here: ftp://xda:[email protected]/Alpine/O2_Roms_Camera_Fixed_Bug/
If you hate the o2 active stuff, then download the one marked "o2stripped" (I would recommend this one). If you like the o2 active stuff, then download the other.
3) The latest Radio ROM available for the 2i is version 1.04. If you upgrade your ROM using one of pug's rom, then your radio will automatically be updated to version 1.04.
Justin
BTW, I think your device is an Alpine, not an Andes.
Got a problem I'm hoping someone can help me with.
I was updating my rom and it all went wrong. When I turn my xda2i on now I get the normal setup then its goes to a black screen with serial written on it (or usb if it is in the cradle), and apart from that it does nothing.
My laptop no longer recorgnises the device so I can't restore the old rom or restart the process????
Can anyone help please?
tez,
You're in what is called "Bootloader". You're OK. You can do one of two things:
1) Simply re-attempt to "reflash your ROM" with one of the ROMs you downloaded.
2) Reflash your ROM with a ROM update provided your manufacturer. I couldn't get my device to update with one of pug's rom (it go stuck around 18%) so I had to reflash my Alpine with an original ROM released from a manufacturer.
Hope this helps.
Justin

Categories

Resources