Hi,
I am Alex and totally new to this forum and indeed the topic of unlocking, rooting and custom roms. Want to try lineage and see what works and doesn't on something not my primary phone before breaking it. Luckily I have a couple of older ones, and one is supported by lineage like my current one. I am using OpenSuSE tumbleweed, Android tools, Studio and udev rules are installed. All mentioned phones are in dev mode. Here is the problem:
My Zenfone Max m1 is not appearing in adb devices. As I tried with my other phones I found out while two (7 and 8) do appear there is also one other (4) which does not either.
All can be listed with lsusb, and the two that are not working show the same device id which I did add to the 51-android-rules file. But I must still be doing something wrong.
sudo adb devices
List of devices attached
M8AIGF007293WPD device
# Zenphone 2 (ZE500CL) (7770=adb 7773=mtp,adb 7777=ptp,adb 7775=rndis,adb,mass_storage 5F03=mtp,adb,pclink,mass_storage 5F07=ptp,adb,pclink 5F05=rndis,adb,pclink,mass_storage
ATTR{idProduct}=="7770", SYMLINK+="android_adb"
ATTR{idProduct}=="7773", SYMLINK+="android_adb"
ATTR{idProduct}=="7777", SYMLINK+="android_adb"
ATTR{idProduct}=="7775", SYMLINK+="android_adb"
ATTR{idProduct}=="5F03", SYMLINK+="android_adb"
ATTR{idProduct}=="5F07", SYMLINK+="android_adb"
ATTR{idProduct}=="5F05", SYMLINK+="android_adb"
# Zenphone 4 (581f=mtp,adb 583f=rndis,adb)
ATTR{idProduct}=="581f", SYMLINK+="android_adb"
ATTR{idProduct}=="583f", SYMLINK+="android_adb"
# Zenphone 5 (4c90=normal,4c91=debug,4daf=Fastboot)
ATTR{idProduct}=="4c91", SYMLINK+="android_adb"
ATTR{idProduct}=="4daf", SYMLINK+="android_fastboot"
# Zenfone Max M1
ATTR{idProduct}=="7772", SYMLINK+="android_adb"
# Zenfone 8
ATTR{idProduct}=="7770", SYMLINK+="android_adb"
Bus 005 Device 020: ID 0b05:7772 ASUSTek Computer, Inc. Zenfone GO (ZB500KL) (MTP mode)
Bus 001 Device 013: ID 0b05:7770 ASUSTek Computer, Inc. Zenfone 8
Doh. With fiddling around with 4 devices at the same time this is the one I forgot to set to usb dev mode....
hi.
Zenfone 4 and Max M1 and not showing in adb devicesAlthough USB Debug is Enable and all Drivers installed
Related
Just purchased Zenfone Max model Z010D and i want to transfer my game/app data using helium but i can't seem to find the adb drivers for it. The universal adb drivers doesn't work. Can anyone help me?
Hi
I also had this problem.
Follow this link: https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view"]https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view
Keep in mind that this will work on win 10. I've tested it on win 7 and during instalation (some blue screen installer) it was written that this is for Samsung device. Running same intaller on win 10 it gave info that this is for android or google something. So, it will work only on win 10.
Hello,
Here is my setup, everything is basically running the latest version:
* MacBook + USB-C-2-USB-A adapter + Micro-USB cable + Micro-USB-2-USB-C adapter
* macOS Sierra (Darwin 16.3.0)
* LEX727 stock 5.8.020S
* Android Studio 2.2.3
* Android Debug Bridge version 1.0.36 / Revision 0e9850346394-android
In fastboot mode, I can list my device:
Code:
$ fastboot devices -l
<serialnumber> fastboot usb:<XXXXXXXX>
But I am never able to see it using adb, despite enabling USB debug mode and whitelisting my MacBook (the phone asked for it):
Code:
$ adb devices -l
List of devices attached
I have this in the kernel logs though:
Code:
default 19:50:56.264047 -0700 kernel 055941.210517 [email protected]: IOUSBHostDevice::start: failed to get device descriptor
default 19:50:56.264327 -0700 kernel 055941.210797 [email protected]: AppleUSB20HubPort::resetAndCreateDevice: failed to start device
default 19:50:56.264392 -0700 kernel 055941.210862 [email protected]: AppleUSB20HubPort::resetAndCreateDevice: failed to create device (0xe00002e9), disabling port
Any idea what I'm doing wrong? Was anyone successful in running adb with LePro3 on macOS? If so what is your setup?
I was able to make it work using a USB-C to USB-C cable. Fun thing, first time I plugged the phone to the laptop, the phone screen was turned off. And the laptop acted like if the phone was charging it! After turning the phone screen on, unplugging and replugging the cable, everything was fine (laptop charging the phone and not the other way around), and the device appeared in adb devices!
Hello all,
For the past 5 hours I've been trying to root my phone, but I fail at the first step: making a backup of the IMEI/NVRAM.
So, what have I done:
- Downloaded the windows drivers from essential.com, and installed them on the PC.
- Download MTK Droid Tools from here, and extract them to the desktop
- Downloaded ADB, Fastboot and drivers from here (goto last page) and installed them.
On my Essential phone I enabled developer mode and went to "System" -> "Developer options" and enabled "OEM Unlocking" and "USB Debugging".
When the phone asked to allow USB debugging for that computer, I allowed.
According to to this guide, I should now start MTK Droid Tools and press "root". However, MTK Droid Tools does NOT show the device info, and on the bottom it says "The device isn't revealed. Connect or reconnect a cable!".
So I went to another PC, repeated all, and same.... Tested on win 10 (up-to-date) and win 7 PC. Tested all USB ports, nothing.
When I press "ADB terminal" in "MTK Droid Root & Tools v2.5.3", it opens command prompt.
Code:
[B]adb devices[/B]
returns:
List of devices attached
adb server version (31) doesn't match this client (39); killing...
* daemon started successfully *
When I close MTK Droid Root & Tools v2.5.3
and rerun:
Code:
[B]adb devices[/B]
List of devices attached
* daemon not running. starting it now at tcp:5037 *
* daemon started successfully *
PM1LHMA861101318 device
so, in conclusion: Phone is connected to the PC, ADB can find it, MTK cannot find the phone.
What am I doing wrong?
Edit:
For crying out loud:
You need to put the phone in "USB Preverences" -> "Use USB for" set to "USB tethering"
which results in:
Code:
--->>> Connect to device <<<---
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
I'm still doing something wrong.... I guess?
Note: i'm running the latest android, 9 (patch 5 july 2018)
LOL
You definetely wrong. MTK Droid Tool for MTK CPU phone (mostly Chinese Phone) not for Essential Phone that use Qualcomm CPU.
Beside there is a post about Root Essential Phone why don't you search before try anything that maybe can bricked your phone.
15:16:08.264 v3-build-874-arm64-play
Device: asus asus ASUS_Z01HDA WW_Z01H msm8953 "qcom" ASUS_Z01H_1 OPR1.170623.026.WW_user_80.30.76.74_20190319 [arm64-v8a, armeabi-v7a, armeabi]
FAILED to read=/system/etc/audio_policy.conf
reading=/vendor/etc/audio_policy.conf
has outputs_primary, sampling_rates=44100|48000
has direct_pcm, sampling_rates=8000|11025|16000|22050|32000|44100|48000|64000|88200|96000|176400|192000
direct_pcm AUDIO_OUTPUT_FLAG_DIRECT
has direct_pcm formats=AUDIO_FORMAT_PCM_16_BIT|AUDIO_FORMAT_PCM_24_BIT_PACKED|AUDIO_FORMAT_PCM_8_24_BIT
direct_pcm FLAG_VARIANT_DIRECT_HD
has usb
has usb outputs
has usb_device, sampling_rates=dynamic
has usb formats=dynamic
forcing FLAG_DLFCN FLAG_NEEDS_DEEP_BUFFER FLAG_NEEDS_EXTRA_SLEEPS
USB can handle Hi-Res - sdk=26
OK flags=0x874406600000000
FLAG_VARIANT_DIRECT_HD
FLAG_SUPPORTS_PCM_8_24
FLAG_SUPPORTS_PCM_24
FLAG_SUPPORTS_UNITY_GAIN_STREAM
FLAG_SUPPORTS_USB
FLAG_NEEDS_EXTRA_SLEEPS
FLAG_SUPPORTS_LDAC
FLAG_DLFCN
FLAG_NEEDS_DEEP_BUFFER
FLAG_ALLOW_DVC_EFFECT
INTERNAL_OUTPUT_FLAG_SR_192K
INTERNAL_OUTPUT_FLAG_SR_176K
INTERNAL_OUTPUT_FLAG_SR_96K
INTERNAL_OUTPUT_FLAG_SR_88K
INTERNAL_OUTPUT_FLAG_SR_48K
INTERNAL_OUTPUT_FLAG_SR_44K
I got a good Asus Zenfone 2 Laser device Z011D (ZE601KL) recently.
I am not able to get the PC to even recognize that the device is connected via USB. Any hints on what to check?
I've already checked that other Android phones can connect with the same cable and PC:
[Phone] How to transfer files from phone to PC? | Official Support | ASUS Global
www.asus.com