Database Users

[Q] RT2800 USB vs Monitor Mode

Hi,
I have just picked up a Note 3 on Three UK.
Am I right in assuming that the wireless chipset BCM4339 which is the same as on the Nexus 5 is still not able to use bcmon mode to allow us to enable monitor mode?
Would a specific ROM be necessary to allow a TP-Link WN722n (RT2800usb) to work on OTG cable?
I have tried both bcmon on my note 3 and also my TP-Link via USB OTG cable and neither have had any results.
Thanks
Toby

I've installed USB Host Check to confirm that USB host support is enabled on my note 3.
(android.hardware.usb.host.xml OK)
(handheld_core_hardware.xml OK)
I then installed USB Host Controller.
Both devices recognised but obviously not working. (Atheros USB 2.0 WLAN for TP-WN772n) and (ASIX Elec Corp AX88x72A) for USB ethernet.
When I run USB Host Controller I get the following error message:
"s3c usb host driver not found".
Another member on XDA posted a link to the Halaszk Kernel on the N9000 apparantly having OTG USB host support for S3C
(Original post http://forum.xda-developers.com/showthread.php?t=2599045)
Halaszk Kernel for the N9000
http://forum.xda-developers.com/showthread.php?t=2590320
Toby

I'm still hitting a brick wall on this one search wise.
Would stil love to be able to use my WN722N on my Note 3.
Has anyone any experience in modifying the Kernel Module to allow the ath9k to work on Note 3?

Getting a wireless adapter to work on Ubuntu or any form of Linux can be difficult if the manufacturer doesn't provide direct driver support or at the very least a "Tar" which would allow an end user (with sufficient skill) to compile the drivers them self. My understanding of this is limited but from what I can remember Android is JavaScript VM running on a Linux kernel. So you need the Linux source code for the driver which usually comes in a "Tar". Feel free to correct me if I am wrong.

Uvc driver for huawei p smart

Hello friends. Is there a way of installing uvc driver for our phones so that it can be used for fpv. The otg does work with memory sticks and all but cannot recognize the connected video receiver. It says I have to install the uvc driver. I tried and failed. Any help?

Unable to unlock bootloader

I've read the threads about unlocking bootloader in the redmi note 7, but none of them helped.
So the main problem is whenever I connect redmi into PC, it's recognized, but when I enter Mi Unlock app (miflash_unlock-en-3.5.1128.45), the phone is showing in left-up corner "..key to shutdown" (I can't see anything before key) and it's unmounting from PC.
I tried connecting it in many moments, but the result is the same. I tried also installing drivers from xiaomi, that you can install through the app itself, but it didn't change the results.
I've installed ADB app and drivers (as shown here: https://forum.xda-developers.com/showthread.php?t=2588979) and connected my device to mi account.
As in the thread on https://forum.xda-developers.com/redmi-note-7/how-to/one-redmi-note-7-unlock-bootloader-t3890751 I tried to check via ABS if my device is listed and there is the output:
C:\adb>fastboot devices
afd9005 fastboot
C:\adb>fastboot oem device-info
...
FAILED (command write failed (Unknown error))
finished. total time: 0.005s
Click to expand...
Click to collapse
And the device goes into that mode like from mi unlock app
I'm posting below the link to the screenshots of my phone's settings, os version and things that I've read could help (I don't know how to insert photos in the post other way).https://we.tl/t-O3Z7H6AABu
I've been fighting with it for too long... Maybe someone encountered this problem and/or is able to provide the fix.

You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Update: Hi, I found a better way to fix this problem. I did with my Dell 14 5447 (with Intel chipset and Windows 7). I uninstalled Intel(R) USB 3.0 eXtensible Host controler in Program and Features. And then download and install a newer driver from Intel (https://downloadcenter.intel.com/do...100-Series-and-Intel-C220-C610-Chipset-Family).

gazavn said:
You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Click to expand...
Click to collapse
Oh I didn't try with USB 2.0. I have one in Mobo, so on few hours I'm going to tell if it fixed the issue

gazavn said:
You can see help here https://forum.xda-developers.com/redmi-note-7/help/fastboot-issues-t3964100
Should to try another PC or use a 2.0 USB HUB. I also have same problem with my laptop (core i3 with USB 3.0 port) but it's OK on an older PC (without USB 3.0)
Click to expand...
Click to collapse
On my main PC plugging into a USB 2.0 on back panel didn't work, neither on my dad's PC, that have in the front panel USB 2.0.
So I opened the whole thing now on the laptop without USB 3.0 drivers installed. I installed win7 and I didn't have option in driver selection "Android", so I installed xiaomi drivers and just plugged the phone. AND IT WORKED! Now I just have to wait 102 hours XD
I have 2 modules inside my laptop that are connected to motherboard (1st include 2.0 usb, and 2nd 3.0, both on different sides of laptop), so they're in some way separated. I don't know how it would behave if I installed the drivers, but for now I'm not checking it.
Thanks you for help, I would never come up with that fix!
Just leaving the specs if it's caused by hardware and for someone who has the same:
i5-8400
B360M pro-vdh
Probably not improtant in this case, but just in case:
GTX 1060 3GB
16GB ram ballistix sport lt

=Terys;81704493]On my main PC plugging into a USB 2.0 on back panel didn't work, neither on my dad's PC, that have in the front panel USB 2.0.
So I opened the whole thing now on the laptop without USB 3.0 drivers installed. I installed win7 and I didn't have option in driver selection "Android", so I installed xiaomi drivers and just plugged the phone. AND IT WORKED! Now I just have to wait 102 hours XD
I have 2 modules inside my laptop that are connected to motherboard (1st include 2.0 usb, and 2nd 3.0, both on different sides of laptop), so they're in some way separated. I don't know how it would behave if I installed the drivers, but for now I'm not checking it.
Thanks you for help, I would never come up with that fix!
Just leaving the specs if it's caused by hardware and for someone who has the same:
i5-8400
B360M pro-vdh
Probably not improtant in this case, but just in case:
GTX 1060 3GB
16GB ram ballistix sport lt
My pleasure.

Asus Zenfone 2 Laser Z011D ( ZE601KL) Windows 10 USB

I got a good Asus Zenfone 2 Laser device Z011D (ZE601KL) recently.
I am not able to get the PC to even recognize that the device is connected via USB. Any hints on what to check?
I've already checked that other Android phones can connect with the same cable and PC:
[Phone] How to transfer files from phone to PC? | Official Support | ASUS Global
www.asus.com

Xiaomi Mi Smart Clock

I've bought one Mi Smart Clock. I love this device: so compact, nice and solid design, a 4inch LCD screen, WiFi and BT capabilities.
There's "too much google" for me, so i'm wondering if it's possible to hack it and run a custom firmware.
Connecting an USB on boot, firstly i got a MediaTek MT65xx Preloader:
Code:
usb 2-2: new high-speed USB device number 22 using xhci_hcd
usb 2-2: New USB device found, idVendor=0e8d, idProduct=2000, bcdDevice= 1.00
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: MT65xx Preloader
usb 2-2: Manufacturer: MediaTek
cdc_acm 2-2:1.0: Zero length descriptor references
cdc_acm: probe of 2-2:1.0 failed with error -22
cdc_acm 2-2:1.1: ttyACM0: USB ACM device
usb 2-2: USB disconnect, device number 22
that send a lot of "READY" to /dev/ttyACM0 device.
After few seconds, it disconnect and connect a:
Code:
usb 2-2: new high-speed USB device number 7 using xhci_hcd
usb 2-2: New USB device found, idVendor=0e8d, idProduct=2008, bcdDevice= 2.23
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: X04G
usb 2-2: Manufacturer: Xiaomi
but i was not able to do something more that configure it as firmware allow.
Anyone already did something? There's any team/group/someone else interested in build an hack for this nice device?
Thanks for any help, really appreciated!

I bought the Chinese version, and its model is slightly different from yours. It is said that this is the overseas version of the Chinese version. I compiled a twrp for this device, not sure if it will work on yours.
GitHub - MaxCaiLC/twrp_xiaomi_lx04_device_tree
Contribute to MaxCaiLC/twrp_xiaomi_lx04_device_tree development by creating an account on GitHub.
github.com
Can you back up your firmware with mtkclient and send it to me? I am interested in this model.

Is there a way to add a custom alarm sound?

Hi!...I also have a LX04 version of the firmware, have you been able to extract the X04G version to be able to update the firmware???

MaxCaiLC said:
I bought the Chinese version, and its model is slightly different from yours. It is said that this is the overseas version of the Chinese version. I compiled a twrp for this device, not sure if it will work on yours.
GitHub - MaxCaiLC/twrp_xiaomi_lx04_device_tree
Contribute to MaxCaiLC/twrp_xiaomi_lx04_device_tree development by creating an account on GitHub.
github.com
Can you back up your firmware with mtkclient and send it to me? I am interested in this model.
Click to expand...
Click to collapse
Did you get the firmware version with google assistant?
TIA

Jordi Escolà said:
Hi!...I also have a LX04 version of the firmware, have you been able to extract the X04G version to be able to update the firmware???
Click to expand...
Click to collapse
I have a device with x04g firmware on it. How can i extract the firmware?