Database Users

OUTDATED[Guide] Setting up/using adb/fastboot-unlock, flash custom recovery & root

OUTDATED[Guide] Setting up/using adb/fastboot-unlock, flash custom recovery & root
Below is a great guide to rooting, from several sources, (mostly taken from pingvinen's "An Idiot's Guide to Flashing the Xoom" and a guide by publicanimal. and I hope it helps. You can find the links to all of the files referenced below in the Xoom Heaven thread (thanks StrifeSoldierVII!)[/I]
(New thread in General Section by Jack207407 will have all the updated links for flashing
http://forum.xda-developers.com/showthread.php?t=1443110
One Stop For ROM's, MOD's, and Root Wifi-Only and 3G/4G Models)
"What you need to do can be encompassed in these following short steps (will be detailed later on) in the following order. Each step is required before you can proceed to the next one. However, make sure that you are very very careful and don't try to take any shortcuts. That may soft-brick your device, and you may have a difficult time to explain that to your wife ... You have been warned.
HERE'S THE USUAL DISCLAIMER--I AM NOT RESPONSIBLE FOR ANY HARM THAT MAY COME TO YOUR DEVICE IF YOU FOLLOW ANY PART OF THIS GUIDE--ANY RISK IS ON THE USER!
I strongly recommend you to read the entire guide before trying. In fact, read it twice to ensure that you have understood everything. If there is weird stuff that you don't understand, don't hesitate to ask. The reason for me writing this down is that I like to document what I have learned. This is to me an excellent way to ensure that I will remember what I just did. Another reason was that I could not find a single thread that encompassed all steps required. There are many different threads, but no one (that I could find) that really guides you from start to goal. So enjoy and good luck!
I would like to thank LandMaster and cam30era for helping out with advice during my initial trail-and-error session. I soft-bricked my device once and had big problems to get by point 4.3 (avoid overwriting of CWM), but with their encouragement I finally succeeded.
Just a note before we begin: the different Xoom. Models that are able to use this guide are the following:
MZ600 - stingray_cdma - Motorola US 3g Xoom (technically this device is stingray as well, but I will be using stingray_cdma as the two devices have incompatible software)
MZ601 - utms_everest - Motorola EU 3g Xoom
MZ602 - stingray - Motorola US 4g Xoom
MZ604 - wingray - Motorola Wifi Xoom
(thanks solarnz!)
___________
Overview of the 6 required steps
1. Install Motorola USB drivers for your computers (for USB connectivity) 2. Install Java SDK and Android SDK tools (for adb and fastboot commands) 3. Unlock the device for flashing (allowing replacement of recovery and boot images) 4. Install a modified recovery image (ClockWorkMod recovery for Android) 5. Root the device (Allow r/w access to the device filesystem) 6. Flash a kernel that supports overclocking etc.
Steps 1, 2, 4, 5 and 6 require that you download install, image and zip files needed for the flashing.
All this was performed on a Windows PC. Windows 7, Mac and Linux users will probably have to do some steps differently.
1.0 Install the latest Motorola USB drivers
The installation file can be found at: http://developer.motorola.com/docstools/USB_Drivers/
1.1 Install the drivers and ensure that your Xoom is recognized by the computer
2.0 Installation of development software
Android SDK and Java SDK need to be installed. You can find the installation kits here.
http://developer.android.com/sdk/index.html In case you can't find fastboot.exe, look for it here (thanks to jerrycycle): http://forum.xda-developers.com/showpost.php?p=19546334&postcount=5
Update: you could also just install the adb fastboot pack here:http://www.android.net/forum/downloads.php?do=file&id=67
http://www.oracle.com/technetwork/java/javase/downloads/index.html
2.1 Install them as any other software, making an Android SDK folder on C/.
2.2 Make sure that all the files you need are in the Platform Tools folder (fastboot, recovery image file and so on). Copy any files in the Tools folder to the Platform Tools folder if necessary. Note: If the Android SDK complains that the Java Dev Kit can't be found, just press Back and then Next again. Wierd, but that seems to do the trick ... go figure.
(Warning: Never put any zip files in your Platform Tools folder. Flashing zip files through fastboot will cause very serious problems. Zip files must be flashed from the external micro SD card through CWM recovery on the Xoom...we'll get to that later.)
2.3 Test that ADB and FASTBOOT works. You should open a command window by right clicking in your Platform Tools folder where all of your files are, plug in your Xoom to your computer with your Motorola cable (it may not work with a generic cable) and write 'adb devices'. Your Xoom should now be listed. Did your device not show up? Make sure that you have USB debugging enabled in Settings/Applications/Development on your Xoom.
Optional: Those that want to be able to access adb from any where on their computer, here's a tip from scsa20: "For windows, if you go into System Properties and choose Advanced, then Environment Variables..., you'll be able to edit the Path variable under System variables, just add the path to where adb and fastboot is located (separated with a semi-colon ().
Here's what my Path variable looks like:
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%Sy stemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\ System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\android-sdk-windows\tools;C:\android-sdk-windows\platform-tools;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\
It's long but do you see the android stuff there at the end?"
Update: xda poster Mandelbrot Benoit suggests an alternate adb setup, here: http://forum.xda-developers.com/showpost.php?p=18072572&postcount=50
If your windows computer doesn't see your Xoom, consider this (Originally Posted by AngryBulleteyeTruth):
When the xoom does not show up on PC it may be the problem of.... windows media player!
Xoom uses drivers of WMP to communicate with PC. If someone does not have the newest WMP drivers it will not show up and you can see xoom device in the devices tab on PC having an exclamation mark.
So the solution is to download and install Windows Media Player 11. It has worked for me.
--------
OK. Now that you are set up, it's Showtime! Take a deep breath...
3. Unlocking the device for flashing
This step will effectively erase the internal storage, including all your apps and settings. Use whatever backup you want to secure important data before you start. (It will also void your warranty, so you still have time to go back.)
3.1 Power up and start the Xoom.
3.2 Ensure that your device is fully recognized by the computer. A good sign is that the 'Portable device' dialog is activated on Windows when your Xoom has booted. The Xoom should also be seen in 'Computer'. If not, go back to step 2 and double check your USB drivers.
3.3 Use the command 'adb reboot bootloader' to go into Flash mode.
3.4 Use the command 'fastboot oem unlock'. This will trigger a dialog on your Xoom. Follow the instructions on the screen to complete the unlocking. I repeat, this *will* do a factory reset and all data will be lost!
3.5 Once unlocked, the Xoom will restart and work as normal. Don't bother to do any setup at this time, just make sure that USB debbuging is checked in settings, and now go on to step 4
4. Install recovery image (CWM) UPDATED 4/19/12
If you haven't done it already, download the recovery image file and save it to your computer in the Platform Tools folder.
(Download the recovery image from this link: http://forum.xda-developers.com/showthread.php?t=1604014 only the img file flashed through fastboot Remember, never try to flash a zip file through fastboot!)
Important: At this time, make sure you have a good (known to be working) microsd card in your sdcard slot in your Xoom. Reboot the Xoom with the sdcard in the slot to make sure it's mounted.
4.1 Boot into flash mode with 'adb reboot bootloader.'
4.2 Install your downloaded recovery image: 'fastboot flash recovery eos-recovery-r6.img' or whatever is the exact name of the recovery img file you are flashing.
4.3 Enter CWM recovery with the procedure below.
4.4 Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo section 4.
4.5 Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work (if you see Starting Fastboot Protocol), experiment with the timing (see below).
4.6 When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for getting this far!
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. Just repeat steps 4.1 through 4.6 if that happens.
UPDATE(12/28/11) Since putting this guide together, Motorola has issued a number of Over-the-Air (OTA) updates that have complicated the process of flashing the Clockawork Mod recovery, so if you have accepted any OTA updates, please read the following, which describes each step (http://forum.xda-developers.com/showthread.php?p=26009191#post26008083) (Thanks to Landorin.)
(If you have root and want to remove these files, remove or rename /system/etc/install-recovery.sh with something like root explorer. You can then flash your custom recovery through fastboot again.)
For those of you that get stuck with some error like 'device not recognized' poster Madjinj gives the following advice:
1) Be sure that you have your adb folder in the root of C drive directly and be sure that you are in adb folder in command prompt program (CMD in Windows machines) i.e by typing "cd c:\XXX" where XXX is the name of adb folder in your machine.
2) Be sure that you type "adb reboot bootloader" in comand prompt to activate adb program. if the problem persists, try typing "fastboot reboot" then after reboot type "adb reboot bootloader" in command prompt program.
3) Use the USB cable that came with your Xoom (some cables are not good in flashing for unknown reason..!!
4) make sure that you activate USB debugging mode.
5.0. Rooting the Xoom
The Universal Xoom Root zip file from solarnz is located here: http://forum.xda-developers.com/showthread.php?t=1242241
5.1 You need to transfer the Universal Xoom Root zip file to a working external micro SD card. You can do this on a computer or cell phone, but the Universal Xoom Root zip file must be located in the root directory of the micro SD card.
5.2 Insert the now prepared SD card in the Xoom.
5.3 Boot into recovery (as described in 4.3). Navigate using the volume buttons and press the power button to select the active option.
5.4 Select 'Install ZIP from sd card.'
5.5 Select 'Choose ZIP.'
5.6 Navigate to the ROOT zip file with the Volume buttons and select it with the Power button. Confirm that you want to install it.
5.7 Everything should indicate success, so back out to the main CWM menu and reboot the device.
5.8 From Android Market, install any app requiring root and start it. If the rooting was successful, then the app should request superuser permission and you should be able to grant it without any problems.
6. Flashing a new rom or kernel...(e.g. Tiamat Moray Rom and/or Odachi Kernel). Look in the Xoom Heaven thread or in the Development section of this form for all of these files.
6.1 This step is identical to 5, but swap out the ROOT zip for the ROM or KERNEL zip. For simplicity, you may want to prepare the micro SD card with both zip files at the same time in step 5.1..."
------------------------
This is still one of the best explanations of how to use adb and fastboot to unlock and root the Xoom and install a custom recovery, etc, and doesn't deserve to buries on back pages of this forum. Hopefully, the step-by-step nature of this guide will help those of you that have limited experience with this kind of tinkering.
Oh, and please feel free to correct any errors or omissions. As I said, it came from several sources and needed to somewhat updated.

Thank you, just bought my xoom yesterday and was confused on the steps to take!
This has made it as clear as possible for me and will follow your instructions to the letter tonight.
Sent from my MZ604 using xda premium

fastyan said:
Thank you, just bought my xoom yesterday and was confused on the steps to take!
This has made it as clear as possible for me and will follow your instructions to the letter tonight.
Sent from my MZ604 using xda premium
Click to expand...
Click to collapse
Good luck! Let us know how you make out and if anything needs to be clarified.

think im doing something wrong as unlocked fine but when i go to install the recovery file it keeps coming up cannot load? any ideas where im going wrong?
been at it 3 hours now lol and losing the will to live im sure its gona be something simples

fastyan said:
think im doing something wrong as unlocked fine but when i go to install the recovery file it keeps coming up cannot load? any ideas where im going wrong?
been at it 3 hours now lol and losing the will to live im sure its gona be something simples
Click to expand...
Click to collapse
Check to make sure that your file download is good, and that you are typing it's name correctly. Better yet, you could rename the file "recovery.img" and that will make it very easy to get it right.

On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium

fastyan said:
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium
Click to expand...
Click to collapse
When you're in the bootloader, you won't be able to access the SD Card or anything of that sort and adb won't work, in stead, when you're in the bootloader, you're switching over to fastboot. I'm sure if you type in fastboot devices you'll see your xoom listed.

Thank you for the reply and that's one thing sorted but any idea why its telling me "cannot load recovery"? I have tried renaming it and downloaded the recovery file 4 times incase that was wrong but still no joy :-(
I have done this all before on my phone and never had a problem so I must be missing something but f$*@ed if I know what?
Thanks again for your help though.
Sent from my Desire HD using xda premium

Just had a thought. Could it be that the XOOM hasn't actually unlocked, would that cause it to not load? Is there any way to check if its unlocked successfully? Although I did try it twice before?
Sent from my MZ604 using xda premium

Once you got it in the bootloader, you gotta make sure you do fastboot oem unlock, press volume down then up, press volume down again then up again, and let it format and reboot.
If it's already unlocked, you'd get a message telling you so (generally).
Then when you go to flash the recovery, make sure that the recovery image is in the folder where fastboot is and type in fastboot flash recovery recovery.img (if I remember the syntax that is, I'm at work and don't feel like scrolling up or going into the root guide to confirm xD ).

fastyan said:
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium[/QUOTE
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
Click to expand...
Click to collapse

okantomi said:
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote.Oof course the cwm recovery img.. goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
Click to expand...
Click to collapse
With the way I have my system setup, I can run adb and fastboot wherever I am

No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
No progress yet as im at work but when I get home I will start the process from scratch again and see how I get on and will keep you posted.

scsa20 said:
With the way I have my system setup, I can run adb and fastboot wherever I am
Click to expand...
Click to collapse
Care to share???
That would be helpful to many, I'm sure. We could add it to the guide, along with anything else you can think of.

fastyan said:
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
No progress yet as im at work but when I get home I will start the process from scratch again and see how I get on and will keep you posted.
Click to expand...
Click to collapse
If, as you follow this guide, you find any explanations that are not clear or if you think of a step to take or something else that might improve the guide, please post it and we can add it in. It's been almost 6 months since I've unlocked and at least a couple of months since I've had to use adb, so I'm sure I've forgotten some things. Those of you whose experience is fresh can give really good advice. That's how this guide was originally written, by pingvinen, right after he had gone through a grueling rooting process.

okantomi said:
Care to share???
That would be helpful to many, I'm sure. We could add it to the guide, along with anything else you can think of.
Click to expand...
Click to collapse
For windows, if you go into System Properties and choose Advanced, then Environment Variables..., you'll be able to edit the Path variable under System variables, just add the path to where adb and fastboot is located (separated with a semi-colon (;)).
Here's what my Path variable looks like:
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\android-sdk-windows\tools;C:\android-sdk-windows\platform-tools;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\
Click to expand...
Click to collapse
It's long but hey, see where the android stuff is near the end?

@Okantomi:
We all have learned some things from trial & error (eg.the sk cannot detect java dev kit)
i could only flash recovery after renaming it to recovery(do not forget to add.img in cmd while flashing).also the official motorola name recovery as same.
after downloading sdk and updating to platform tools i have kept a zip in safe location so that i do not need to download again platform tools if i install sdk fresh
initially knowledge was scattered now it is at one place.
right now testing steady hawkin's kernel and new recovery
btw good signature pic.

Ok so another night has gone and still can't get recovery on!! Tried re unlocking the XOOM and every time it comes up with "cannot load recovery.img" I tried installing everything on my laptop and went right from the start and getting exactly the same thing!
Starting to think im never gonna get this sorted now :-( just feels like the XOOM isn't unlocking? Every time I go through the unlocking process it never states that its already unlocked? Is there any way I can check that it is unlocked?
Please help im losing the will to live now lol
Sent from my MZ604 using xda premium

I would say to send it to me and I can take a wack at it but I don't think you want to wait that long to simply root it.
Let me ask you, are you getting any sort of error messages when you do fastboot flash recovery recovery.img? If so, what's that error message?

scsa20 said:
I would say to send it to me and I can take a wack at it but I don't think you want to wait that long to simply root it.
Let me ask you, are you getting any sort of error messages when you do fastboot flash recovery recovery.img? If so, what's that error message?
Click to expand...
Click to collapse
Not getting any error message it just says "cannot load recovery.img"
I have tried with and without the .img and always the same?
Tried going through the whole process again on my laptop incase I had missed something but exactly the same.
When I unlock it I follow the onscreen instructions and at the end it says its complete before it reboots. Then I turn on usb debugging again and reboot bootloader all ok but won't let me load the new recovery?
Normally I would just say it wasn't meant to be and leave as it is but I wont be beaten on this so I'm purposely not installing anything on it till its done. Any ideas apart from bringing it round yours lol ;-)
Sent from my Desire HD using xda premium

Help Flashing modified 3e recovery via wirelesss ADB

I am getting the e-signature verification error when trying to re-install package from stock recovery. I need clockwork recovery so i can install ROM's. I have a HW issue with my USB which prevents me from connecting to my PC. I have installed wireless ADB so i can flash a modified 3e version of the recovery manager to bypass the e-signature verification. I have a file attached with the modified 3e recovery. The install.bat file is set up for a usb connection with debugging enabled. Is there any way i can modify this batch file so i can use wireless ADB.
Sorry i did not post under development, i am under 10 posts. Every question i have ever had has been already posted until now
Thanks in advance

Having trouble with the USB on your phone? Getting the "This device has malfuctioned" error in Windows? My phone does that too, but I found that when I connect through a USB hub instead of directly to the computer, I can get my phone to work properly about one time in ten. You might also want to daisy chain hubs to get the phone further away from the computer, electronically speaking. It's worth a shot.
I just found this out the other day, and the first thing I did was to flash the modified 3e recovery, then replace it with ClockworkMod However, if I read the thread correctly, you can do it without using USB. If you open up the 3e_recovery_installer zip, you can see that there's really only one important file in there, and that's called "recovery". All the other files are just helpers. The install.bat (which you can edit in notepad) to coordinate the programs, TempRoot.exe to gain root access, adb.exe to install the "recovery" file, and two helper dll files for adb. That's it.
If I read post 9 from the original thread correctly, you can adb into your phone, get root access, then remount your /system partition as read/write with the command "mount -o rw,remount /dev/block/stl9 /system". Once you've done that, you can copy the "recovery" file from the 3e_recovery_installer zip to /system/bin. If you read through the install.bat file, you can see that's mostly all it does, anyway.
The author of post 9 mentions copying keys to /efs, but I can't find anything in the zip file or in the install.bat file about keys, so I'd probably ignore it.
Okay, so I've maybe pointed you in the right direction, now I'll give you some warning. Read everything you can. Read the original post in it's entirety, even though it's boring. Research until you know that you understand everything in that thread. Read through the install.bat file, and research until you're sure you understand everything in the batch file. Your phone's USB doesn't work correctly. You may not be able to flash back to stock. If you screw this up, mistype a command, or miss a step, you might screw up your phone to the point where you can't recover from it without a JTAG flash. Be very, very careful. Understand everything that you do, every command you type, and why you're typing it. Good luck.

*UPDATED**UNLOCK TOOL (4-2019) for ALL Versions of BLU R1-HD

BLU R1-HD bootloader unlock script tool, and TWRP install tool.
Download is a zip file, unpack it to somewhere you will remember. Run the dirty-cow-tool.bat // mtk-su-tool.bat
The included files and folders are set to hidden, in effort to keep them safe from accidental delete.
Must have adb+fastboot + drivers installed and setup prior to using tool
Easiest method to install adb + fastboot on windows is with "15 second adb + fastboot install TOOL"
LINK==>ADB+FASTBOOT
It is for windows
In linux :
"sudo apt-get install android-tools-adb"
"sudo apt-get install android-tools-fastboot" Some fastboot commands were missing when i used this one ie "fastboot flashing get_unlock_ability"
"sudo apt-get install fastboot" worked better when I tried. ( i used that command as a check before doing the unlock, so it was needed only for that check)
Using Tool
On Windows?
Unzip the downloaded file to a new folder, open new
folder and click on "dirty-cow-tool.bat". // "mtk-su-tool.bat"
Do the steps in order (1-2-3-4) to be unlocked, then
Step (5) to get to second page where step (1) is root
The rest is optional
On Linux?
Unzip downloaded file to new folder folder .
Open folder. Then open R1-Linux-tool-v2 folder
Open terminal from that folder and type
" . R1-HD-TOOL.sh "
Same order of steps (1,2,3,4) step (5) for extra
Steps (1 on second menu) for superSU root.
Second menu steps (2,3,4,5,6,7,8) are optional.
**Linux Note**
The tool uses "fastboot flashing get_unlock_ability" as one of the methods to check before doing the unlock.
The version of fastboot that installed with "apt-get install android-tools-fastboot" did not recognize
this command. But "apt-get install fastboot" updated some version and then the command was recognized.
******OTHER NOTES****
--- this has been mentioned in the general thread and the modified v17 thread, but It has come up again so I wanted to make note of it.----
--- The newest blu versions (V7.4.2 and V17) Have made changes to "toolbox" and this effects things like "adaway" and "titanium backup"
--- The suggested fix is to install busy-box. I have had success with the version from play store, some prefer to use f-droid version. Either one will do. Install it and open the app. From in the app you need to do an install.
CHANGE LOG
V1:. Initial release : removed
V2:. : fixed typos preventing proper function
V3:.: switch file verification to md5 check instead of "ls-l" comparison.
V4: current version: add extras page, add SU flash, de-bloat script, Added Fm Radio, Added pre-loader roll back
V5: Fixed wrong loop "goto" line that made preloader rollback do "MTK_BLU Debloat v2" instead
V6: Added manual pause to script for mods that need recovery (Extra's 5) . Added redundent recovery flash command .
Few reports of recovery "not Sticking" and needed to run the flash commands manually one by one. Maybe the redundent
flash will make it survive. If still having problem with recovery "staying install" try manually flashing
here is link to the steps needed. FLASH RECOVERY
V7 Improved logs Added line to make batch run as sub-process so if error occurs , will not close
V7.1 : Updated the fm radio install zip and include the needed selinux mode changer app
V8: fixed dependency of needing to be unzipped to location w/o spaces in name. (when used from location with spaces, tool used to fail to push needed files).
.. added more time to allow dirtycow to "spawn" its root shell. Recent testing has shown sometimes it takes longer than the 60 seconds allowed in the script. Now it is looped 3 times.
V9 Added full path to abd push lines for recovery flash files. included fastboot.exe file to address some version issue where user s version would not output text file I coded into script for a verification ( included file is called by script, no need to do anything different with it)
V10: Moved zip file to included folder to help preserve locations when unpacked, added device check before running tool; So tool not used on wrong device, Rearranged order of operations on extra's page. (recovery installed options) Push files while in android before rebooting to recovery( should improve reliability for multiple reports of not automatically installing options for some)
******I have received some reports that some devices are reporting "ro.build.product =R1_HD and not "BLU_R1_HD" like mine, so the added device check is blocking tool from starting If this happens to you , you can make edit to the .bat file like below.
Change this line
Code:
:next_check
find "BLU_R1_HD" "%~dp0workingproduct.txt"
To this
Code:
:next_check
find "R1_HD" "%~dp0workingproduct.txt"
it is line #23
V11: Updated device model verification lines
MTK-SU: Replaced all dirty-cow part with New MTK-SU binary(elf) from @diplomatic
source
Click to expand...
Click to collapse
Credits to @Diplomatic for his work on the Mtk_su that I used used to make this tool work again after Dirty-Cow was patched.
DOWNLOAD LINK
Preferred to use the Downloads tab of this thread.
Archived downloads on android file host also == link
XDA:DevDB Information
R1-HD Dirty-cow Unlock Tool, Tool/Utility for the BLU R1 HD
Contributors
mrmazak, vampirefo for his recovery, lopestom for his recovery, emc2cube for his debloat zips, christianrodher for his dirtycow method,
Source Code: https://github.com/mrmazakblu/DirtyCow-R1_HD
Version Information
Status: Testing
Current Stable Version: V11
Stable Release Date: 2017-04-11
Current Beta Version: MTK-SU
Beta Release Date: 2019-04-14
Created 2017-02-22
Last Updated 2019-04-18

Reserved
Items planed to be addressed in next release:
--Add few more file integrity checks to the extra's page
--Add copy log to clipboard option so it is easier to post log entry if needed-------*********----already-_added to github copy of batch file
--Add a verification step that checks what recovery is installed( to prevent trying to do steps on extra's page with stock recovery)
--Possibly move to a "fastboot boot recovery" instead of "adb reboot recovery" for the same reason as above
--Add wget or similar to the extra's items so initial "TOOL" size is smaller (not that 40-50MB is big, but to some it may be )
--Add additional "selinux mode changer apk" for fm radio install rather than just the note that says it needs to be found.

Reserved

Works great on OEM 6.6, thanks for the tool!

So I got the one-click-root.sh done, maybe. Can some linux users go over it, make sure I didn't do anything stupid? I don't exactly have a device to check it with atm, and I am not pro with scripting, barely novice, so it is a pretty basic conversion of the batch file. Still, it might work . Just would like a few eyes on first.
https://github.com/theredbaron1834/Scripts/blob/master/one-click-root.sh
Also, I looked at dirty-cow-tool.bat. However, wow, more an advanced batch file, and I am not sure what the first half does, so not sure how to convert . However, it seems if anyone does get it, the eqiv of goto for linux is funtions. simple cheatsheet:
Code:
function stuff {
echo "this stuff is run via the function"
{
stuff #goes to stuff and runs function

theredbaron1834 said:
So I got the one-click-root.sh done, maybe. Can some linux users go over it, make sure I didn't do anything stupid? I don't exactly have a device to check it with atm, and I am not pro with scripting, barely novice, so it is a pretty basic conversion of the batch file. Still, it might work . Just would like a few eyes on first.
https://github.com/theredbaron1834/Scripts/blob/master/one-click-root.sh
Also, I looked at dirty-cow-tool.bat. However, wow, more an advanced batch file, and I am not sure what the first half does, so not sure how to convert . However, it seems if anyone does get it, the eqiv of goto for linux is funtions. simple cheatsheet:
Code:
function stuff {
echo "this stuff is run via the function"
{
stuff #goes to stuff and runs function
Click to expand...
Click to collapse
thank you for your input.
As far as the begining of the batch, It is adding a few folders to the "path" variable so help ensure the "adb push" commands find the files it is trying to push. Then it sets some folder "flags" to hidden so that the files the batch needs don't get accidentally moved or changed. Then the large section with mostly "echo" that is to set up the "simulated" G.U.I.
The lines of just "::::::::::" are simply used to help with reading the batch file. i use them to seperate functions. They are not needed.
The lines with only 2 "::" are standard windows comment / remark line entries
The lines with 1 ":" are the beginning line of the loop/ function == the line that "goto *" searches for

Does Works to unlock 7.4.2?

khyr said:
Does Works to unlock 7.4.2?
Click to expand...
Click to collapse
It is supposed to. It is the same base codes used from original script, and that one was confirmed to work. I Do not have first hand use of V7.4.2 so it is only confirmed through other users.
The dirty-cow being used has been patched by google in Dec but blu has not rolled out the patch. So there is no reason for it not to work.

edit:
I have the linux version ready.
-the first step, (ADB Push) is ready. including md5 file checks
-step 2 is ready= running dirty-cow with md5 check before final writing to mmcblk device
-step 3 is ready unlocking bootloader = including check if unlock is done, but need to fix the "unlock_adility" check
I can make to file to compare and grep the line needed, but cannot "sed" the extra information or do a > < comparison
-step 4 is ready .--flash twrp
Finished 90% of tool.
still need to tweek the log feature.
I ran tests on the lop back to menu and test ran
1. push files for dirty-cow and md5 check . then made push fail to verify the check method was valid ==pass
2. run dirty cow commands and md5 verification on resulting file. ==pass
3.unlock bootloader --- I ran it (needed to fake the already unlocked check) it works == pass
4 . flash twrp --installed both version i have, both install fine ===pass
5 extra menus -- ran . install su-----debloat---rebloat--- add fm radio--- preloader roll back =====all pass
(bootloader roll back needs manual intervention to re-enter fastboot during the boot loop that is unavoidable)
6. instruction ====not written yet
7. exit yes it closes == pass
8. logs --- needs completeing

I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.

torchredfrc said:
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
Click to expand...
Click to collapse
no it does not.
the /sdcard is the internal memory and the Download folder is already there.
you might be having issues but the folder is already part of normal system

mrmazak said:
no it does not.
the /sdcard is the internal memory and the Download folder is already there.
you might be having issues but the folder is already part of normal system
Click to expand...
Click to collapse
Fair enough, my restore didn't have /sdcard/Download and I made an assumption that /sdcard was my mounted card. Thanks for the insight.

OOPS
found typo on V4 of tool. batch files sets variables for "return", from loop functions. And two returns were set to same label9, so if you had tried to do extra's menu option #8. "ROLL Back Preloader" , instead it was running option # 5. " MTK_BLU Debloat v2"
fixed and still reading and re-reading to search for errors.
This looks bad.
The reason I put together this tool was I felt it was important to make a way to minimize the problems usually associated with android modifications. By making "typo's" a thing of the past, and I found them in my own script.
re-posted V5 combined with linux V2--

torchredfrc said:
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
Click to expand...
Click to collapse
I'm a total noob, and I'd like to know how to proceed with the supersu and all the other parts of step 5. Thank you

gabriel986 said:
I'm a total noob, and I'd like to know how to proceed with the supersu and all the other parts of step 5. Thank you
Click to expand...
Click to collapse
Ok. After you have completed upto twrp install. You can do the options on #5. It is all programed and automatic. What is does is put zip files onto the phone and reboots phone into recovery, then recovery installs them.

mrmazak said:
Ok. After you have completed upto twrp install. You can do the options on #5. It is all programed and automatic. What is does is put zip files onto the phone and reboots phone into recovery, then recovery installs them.
Click to expand...
Click to collapse
I get up to the recovery installation, but then I can not access such recovery on the phone, If I turn it on with power+vol up, it takes me to the default factory recovery by blu.
And If I try to the super su step with the phone on, it resets it, and get it to the screen with the dead android, while the script just shows the ADB DETECTED message.
In case it's needed, my R1 HD is running on
BLU_R0010UU_V7.4.2_GENERIC 09-11-2016 13:38

gabriel986 said:
I get up to the recovery installation, but then I can not access such recovery on the phone, If I turn it on with power+vol up, it takes me to the default factory recovery by blu.
And If I try to the super su step with the phone on, it resets it, and get it to the screen with the dead android, while the script just shows the ADB DETECTED message.
Click to expand...
Click to collapse
You missed a step in the process.
As tool finishes the recovery install it comes to a "pause" in the script, you need to hold the volume up button on phone "before" pressing button on pc keyboard to continue.
If phone does a normal reboot at this point then the system will replace the newly installed recovery with the stock one.
Giving you the situation you have now.
This step I cannot control, you must press volume button on phone to get the boot menu, and directly boot into recovery to ensure that the install sticks.

mrmazak said:
You missed a step in the process.
As tool finishes the recovery install it comes to a "pause" in the script, you need to hold the volume up button on phone "before" pressing button on pc keyboard to continue.
If phone does a normal reboot at this point then the system will replace the newly installed recovery with the stock one.
Giving you the situation you have now.
This step I cannot control, you must press volume button on phone to get the boot menu, and directly boot into recovery to ensure that the install sticks.
Click to expand...
Click to collapse
trying again....
for how long should I press the volume up key?

gabriel986 said:
trying again....
for how long should I press the volume up key?
Click to expand...
Click to collapse
When tool says Hold button , keep it held. Then continue the script. Phone should reboot to the boot menu. Then let go of volume
Some phones do not accept the fastboot reboot command, on those phones need to hold power to shut off. Then volume and power together to come on, release power when screen come on

mrmazak said:
When tool says Hold button , keep it held. Then continue the script. Phone should reboot to the boot menu. Then let go of volume
Some phones do not accept the fastboot reboot command, on those phones need to hold power to shut off. Then volume and power together to come on, release power when screen come on
Click to expand...
Click to collapse
ok.. trying again
---------- Post added at 02:00 PM ---------- Previous post was at 01:46 PM ----------
gabriel986 said:
trying again....
for how long should I press the volume up key?
Click to expand...
Click to collapse
it beat me!
I get stuck in that part of the process, If anyone uploads a video to check what i'm doing wrong, I'll be grateful.

trying to bring my brothers A500 to life in 2019

Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn

Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?

Matra-PB said:
Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?
Click to expand...
Click to collapse
That may not be the problem I've hear a lot of people are having this problem. But it's a good place to start if he hasn't tried it yet.

Success story upgrading A500 in 2019 July
finneus_ said:
Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn
Click to expand...
Click to collapse
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
Step1a: Install a File Manager app from the Google playstore. This will help you extract the CPU ID and convert it with the SBK tool to get the SBK number/string. important steps SBK tool was available in file - SBCalc_v1.1.ZIP available in this forum.
STEP 2b: SUPERUSER and SUPERSU installation
1. Install SuperUser.apk first.. (IMP - Its available in this forum. Its like a base version for superSU to install over. If you do not install SuperUser.apk, then each time you try installing SuperSU, you would get an error message about a SU file being incompatible.)
2. Then install an older version of SuperSU downloaded from the website - filename -> eu.chainfire.supersu_v2.65-265.ZIP . Newer versions will not work. U got to install an older version as new version seems to be a paid SW.
3. Next Open SuperSU app on your tablet and let it update itself a couple of times each time opening and closing the app after the upgrade.
4. Remove SuperUser.apk file as now its no longer needed.
5. Now that you have ROOT access and SuperUSer access
6. Install Titanium Backup. File name in this forum- update-recovery-TWRP-rev2.0-beta4.ZIP . This will help you to flash/upgrade ROM software on your tablet.
Twrp 2.8:
http://www.mediafire.com/file/e7wpny5f39vw3pc/update-recovery-TWRP-rev2.0-beta4.zip/file
Compressed Archive (.ZIP)
File size: 4.91MB
Uploaded: 2018-08-14 21:40:26
https://www.mediafire.com/download/e7wpny5f39vw3pc
STEP 3: Install an Unlocked Bootloader i.e. unlocked bootloader Skrillax v9 - file name in this forum BabSector.rar or A500-Bootloader-Nvflash.ZIP
Once you have reached this step, you now have the basic tools needed for the final ROM upgrade of the tablet.
I did get error message after the reboots that happened after Unlocking the Bootloader. Someting about a LNX partition not being okay or some such msg. Each time I just WIPED the Cache and selected similar options to wipe System, Data, User, Dhelvic cache (spelling incorrect) etc. Since you have not installed the final OS or ROM for your tablet yet, no harm in deleting these partition data. Actually its recommended to wipe, format in f2f formats etc. all of which is possible using the TWRP Recovery software you installed in step 2. Choose Recovery menu option each time the tablet boots or gives errors.... using the volume rocket and power buttons. More info -> Go through this thread and install unlocked bootloader.
https://forum.xda-developers.com/showthread.php?t=1622425
Flashing Bootloader Steps
-------------------------
1. generate your SBK from cpuid
2. put tab in APX by holding reset (small pinhole bottom right side)
and pushing power for 3-4 sec. - then release reset approx 1 sec. later
the screen should be blank and power button should be lit - plug in USB to PC.
2. Run A501 A.bat - when finished reboot tab to recovery (win 7 and under
right click on A501 A.bat and select Run as Administrator)
3. run Recovery(power and volume-) ->WIPE -> "Advanced wipe ->System (only)and swipe to wipe.
4. unplug USB and reboot tab to APX
5. plug in USB afer it is in APX mode -> Run A501 B.bat (win 7 and under
right click on A501 B.bat and select Run as Administrator)
Bootloader unlock tutorial
--------------------------
Step 1: Get your cpuid - https://forum.xda-developers.com/showthread.php?t=1624645
Step 2: Convert it into an SBK - https://forum.xda-developers.com/showthread.php?t=1810618
Step 3: Download the A500 drivers
- http://www.mediafire.com/file/pde8rojv1t8gnif/USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501.zip/file
Step 4: Download the files to install the bootloader
- http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
Step 5: Follow the instructions in "how to.txt"
Step 6: Download a rom and flash in twrp
This tutorial is based of
https://forum.xda-developers.com/showthread.php?t=2450119 thread so big thanks to KaijiKun .
Bootloader unlock files:
http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
STEP 4. Downloaded file omni-4.4.4-20150210-a500-IconiaHD.ZIP as I was not sure version omni 5.1.1 was as stable as Omni4.4.4 reading all the threads in this forum.
First rename the downloaded OMNIROM file as update.zip .
OmniRom 4.4.4
http://www.mediafire.com/file/ghd72j3g618kk9g/OMNIROM-5.1.1-Tegraowners_ROM_v13t2.zip/file
File size: 244.66MB
Uploaded: 2015-04-05 17:40:14
STEP 5: Install another tool adb_fast.ZIP. This tool is also available in this forum.
Note:You need to copy the update.zip file to your computers folder where this tool adb_fast is installed. In mine it was C:\Program files (x86)\Minimal ADB and Fastboot folder. This adb_fast file creates an application shortcut on your computer desktop. Clicking on the short cut launches adb and fast boot programs I mentioned at the beginning.
STEP 6: Copy the file to the SD card (16GB) of your tablet.
Run the adb_fast tool from your desktop shortcut. This will open a Command Prompt type black screen window where you can enter the code as given below. Note you may need to see how your SD card is listed in a file manager in your computer
Code:
adb push update.zip /mnt/sdcard/update.zip --- NOTE: this creates mnt folder on internal storage and I had to then move the file using TWRP recovery tool installed in step 2, to the SD card.
adb push < ------- is the push command.
rom.zip < ------- is the name of the Rom zip file.
/sdcard < ------- is the location your pushing the Rom to.
E.) Reboot tablet with Power+Down Arrow i.e. This will start the Upgrade process for the tablet to OMNIROM 4.4.4
-- Power Button + UP VOLUME pressed... then release Power button after LED lights.
-- System will boot to commmand prompt
STEP 7: Install GAPPS using pico gapps short version and Wipe Data/Factory reset ----------------?>and wipe cache partition?
Reboot after 1st reboot
G.) https://opengapps.org/ to install a minimal version of Google Apps on the tablet.
File name -> pa_gapps-modular-mini-4.4.4-20150410-signed.ZIP
Root tablet again and install SuperSU if you need it
other info.
You can use TWRP to flash the OmniROM on the tablet or you can use the following in worst case senario to do the same.
Code:
fastboot devices
fastboot flash update.zip -- check if syntax is ok from threads in this forum
fastboot reboot-bootloader
copied below from other threads ---->
I find that a large amount of complaints in developer threads are due to people not properly wiping before a flash.
Of course there is times when a 'dirty' flash is fine, but if you're ever not sure, wipe as cleanly as possible.
fastboot allows for about the cleanest of wipes by the way. And each partition can be done separately too.
Code:
fastboot erase system
fastboot erase data
fastboot erase cache
can all be done individually, but to do these all in one command
Code:
fastboot erase system -w
If possible I recommend to do these steps before flashing a ROM, and now that you know you can do this all within fastboot mode i suggest to try it out, its quick and painless!
Don't forget to wipe your kernel too! (fastboot erase boot)
~Important~ If your device uses an emulated SD card (as in no removable micro SD but an SD partition on phone)
Then be careful wiping data/userdata as this will erase all contents of internal SD - you are forewarned!
ADB= Android Debugging Bridge (ADB)
[TOOL]Minimal ADB and Fastboot [2-9-18]
https://forum.xda-developers.com/showthread.php?t=2317790&page=12
First a short explanation:
Fastboot, like ADB, is a tool to communicate from PC to Android phone. There are times when it is a must to use, and times when it is just helpful.
ADB is used within your recovery or within your OS, but when you are in bootloader mode and need to communicate with your phone then you need fastboot.
And you may ask why would i ever need this?
Well many reasons. Main one is knowledge, learning the ins and outs of fastboot, like learning ADB, can get you out of many jams.
And if you want to unlock your bootloader this is done through fastboot. Granted HTC's unlock is... well crap, but for a Nexus this is how its done.
One other reason I have to stress is learning for safety reasons, This is about the safest way possible to flash firmware to your phone (ie Radio, Hboot, Recovery)
Lastly you may want to know the limitations,
There are many of course, this isnt JTAG, it will not resurrect a hard brick, but it often save peoples phones from 'soft bricks' and lots of time when know how and when to use it.
Think of fastboot as the program that takes over when ADB cant be used, it works with firmware more than software.
https://forum.xda-developers.com/showthread.php?t=1624645&page=3
GUIDES
---------------
Civs Guide to flashing the bootloader http://forum.xda-developers.com/showthread.php?t=1622425
Walkthrough using APXFLASH tool at Step 6 http://forum.xda-developers.com/showthread.php?t=1624645&page=2
From Civato's OP of The Guide: nvFlashToolPackages
Skrilax_CZ bootloader thread http://forum.xda-developers.com/showthread.php?t=1619913 and should be "required reading" for anyone mucking about in their tabs internals!!!!
Rollback to HC
jazzyjames guide http://forum.xda-developers.com/showthread.php?t=1516012
Iconia Root http://forum.xda-developers.com/showthread.php?t=1138228 /gingerbreak: For returning to Honeycomb
----------------
To get my CPUID, I have followed the steps below:
Open yr file explorer, esfile explorer is a great one....navigate to:
/sys/firmware/fuse/acer_cpuid - add a zero to the front!
To get CPUID get a Root browser of some sort and go to sys/firmware/fuse/acer_cpu_id
convert my CPUID into SBK?
--------------------------
https://forum.xda-developers.com/showthread.php?t=1055354&page=6
What Does Root Give Me?
1. Full control over your system
2. Ability to alter system files. You can replace many parts of the "Android Core" with this including:
o Themes
o Core apps (maps, calendar, clock etc)
o Recovery image
o Bootloader
o Toolbox (linux binary that lets you execute simple linux commands like "ls") can be replaced with Busybox (slightly better option)
o Boot images
o Add linux binaries
3. Run special apps that need more control over the system
o SuperUser (lets you approve or deny the use of root access to any program)
o Task Manager For Root (Lets you kill apps that you otherwise could not kill)
Tether apps (like the one found at [android-wifi-tether.googlecode.com])
4. Backup your system
o You can make a folder on your SDCARD and backup all of your .APK files to your SDCARD (helps if an author decides to "upgrade" you to a version that requires you to pay to use the version you just had)
5. Relocate your (browser/maps/market) cache to your /sdcard
6. Relocate your installed applications to your /sdcard
7. Reboot your phone from the terminal app easily (su <enter> reboot <enter>)
Turn the rotation lock off.
-------------------------------------------------------
SUMMARY - Regardless of version, rooting is the same... next
** Unlock the bootloader.
** Fastboot flash a Custom Recovery (TWRP).
** Download to the Tablet, Chainfire's SuperSU root updater .zip
** Boot into the previously fastboot flashed Custom Recovery, and flash the SuperSU updater .zip.
** Reboot - you're rooted.
-------------------------------------------------------
PS. I tried to maintain a log in Notepad during my upgrade. Unfortunately did not write detailed instructions and link to required files. Above is a summary of what worked for me.

Can not root
sukasis said:
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
......
Click to expand...
Click to collapse
Hi sukasis, i was unable to root the tablet. I download all and run the runit.win.bat (trying normal, as admin, and open a cmd as admin and then navigate to the bat to execute).
- It say device connected
- Then push 7 files correctly
- Executing of the main script. (it freeze here a lot of time)
Then error: protocol fault (no status)
The file "su" isn't created
Not getting root!
I try in USB 3.0 and 2.0 same error.
I have windows 10.
I uncheck the Debugging mode and it's bring another error, so i believe the connection is good because in debug mode can push files.
I don't know whate else i can do.

How to dump your own image

First, to clarify, the last time I rooted anything was a Galaxy S3 back in the day. I'm by no means an expert, I just figured I'd help out folks like me that haven't touched all these new tools, well, ever.
Just did this myself earlier today attempted to get Magisk root, but alas, I got stuck in a boot loop. Luckily I had muddled through getting the image first, otherwise I'd still be stuck in said boot loop. I figured I'd post this for anyone else trying to root these things just to make sure you have a backup you can trust (I generally don't trust rando images that folks post online). All of the instructions below are assuming you're on Windows 10 and using PowerShell just because that's the default these days. Without further adieu.
Download ADB/fastboot (on your Windows machine)
I downloaded adb/fastboot from google directly: https://developer.android.com/studio/releases/platform-tools
Just extract and browse to the platform-tools directory in Windows Explorer until you can see adb.exe and a bunch of other tools
Download the latest SP Flash Tool
I just grabbed it from here: https://spflashtools.com/
Please let me know if there's an "official" place to find SP Flash Tool, cause everything surrounding all the download sites seems a bit sus...
Enable USB Debugging (on the tablet)
Go to settings -> About tablet
Tap the Build number 10 times (until debugging mode unlocks)
Hit back and go to System
Click Advanced and then Developer Options
Enable USB Debugger
I also enabled OEM unlocking because the whole point of this is for me to run either AOSP or Lineage someday. I honestly don't know if unlocking the bootloader is needed for dumping your own images, but I highly suspect it's not.
Plug the tablet into your computer
You'll likely see a prompt on your tablet about allowing your computer to debug your tablet. I just checked the box and hit accept so I wouldn't see it again.
Get your scatter file (on your Windows machine)
I tried several things to get the scatter file (I guess this is like a partition table based on the contents I saw) but in the end, by far the easiest way was to just download the scatter file from the file system.
In the Windows Explorer window from before (platform-tools), hold down shift while left clicking and click on Open PowerShell window here
Now type the following to get a shell on your:
.\adb.exe shell
This will get you into the shell environment. Now type the following to verify your scatter file is there:
ls -al /system/data/misc/
In here you should see something like:
-rw-r--r-- 1 root root 13893 2008-12-31 19:00 MT8168_Android_scatter.txt
Now that we have the name, just type exit to get out of the shell
Download the scatter file
.\adb.exe pull /system/data/misc/MT8168_Android_scatter.txt
Open up the scatter file in your favorite text editor (for me, Notepad++)
Now you can see the partition layout, offsets, etc, etc
Dump your image(s) (on your Windows machine)
Now open SP Flash Tool (flash_tool.exe)
On the Download tab, make sure the Download-Agent is MTK_AllInOne_DA.bin
Now click Choose for the Scatter-loading file and browse to the scatter file you just downloaded
This should be in your platform-tools folder unless you moved it
Once the scatter file is loaded, the partition table should fill up with a bunch of partitions
Click on the Readback tab
Click Add
Double-click on the new entry
Navigate to where you want to save your image, and give it a name (in this case I'm starting with boot.img)
Remember how you opened the scatter file in a text editor? Search in the scatter file for boot.img
Make sure the region matches (should be EMMC_USER) between the scatter file and SP Flash Tool
Copy/paste the value for start_addr in the scatter file to Start Address in SP Flash Tool
Copy/paste the value for partition_size in the scatter file to Length in SP Flash Tool
Now do the same thing for recovery.img and any other images you'd like
If you want a full ROM backup, name the file something like ROM_0, then use Start Address of 0x0 and length as the start_addr for the second-to-last entry in the scatter file (in my case, it was 0xc1a80000, just make sure it doesn't start with f's)
Note: I don't know for sure if this is accurate or not, I'm still playing with it, but so far it appears to be. Probably?
Poking around in WwR MTK 2.51, it looks like for this particular device (100011885) I wanted a total dump of 0x73A000000. It looks like this number is derived from the first 8Mb of the EMMC_USER dump, so I'm not sure of an easier way than throwing WwR MTK at it for the moment.
Once you've got all the entries for what you'd like to dump, make sure to disconnect the tablet from your computer and power it off
Now click on Download in SP Flash tool
Once things grey out, then plug the tablet in. After a few seconds, you'll see the images start dumping.
Congrats, you have a boot.img (and whatever other images you wanted). Like I said, from here I tried using Magisk to patch the boot file, but when I flashed it in fastboot, after enabling OEM unlocking in Developer Options, it just kept popping up the initial Onn graphic along with the Orange State warning without getting to the "fancy" Onn graphic and the rest of the boot process. I was able to flash the original boot.img back and it once again booted properly again.
Also, for anyone interested, I've posted my dumped files for the 100011885 in my google drive: https://drive.google.com/drive/folders/17LtLtjKg4JJU9EJdIXPsyNjen0H-ilMX?usp=sharing
Maybe someone will have pity on me and figure out why Magisk isn't working?
Whenever I get a moment, I'll dump my 100003562 as well.

First, thanks a ton for this. I have been trying to pull a full system dump since I bought the tablet and had resorted to single pulls by name(very long and involved) I don't know if this will work for you, but on both of my 7 inch Gen 2 tablets, I just sideloaded Magisk Manager and then opened it (this was after unlocking the tablet) When I first opened MM it just said it needed to download some additional files for my environment. I clicked okay, it downloaded and installed the additional files. Once it rebooted, I open MM again and clicked install Magisk. On the next screen, I clicked direct install and let it do it's thing. After rebooting, root checker showed I had root, but I still can't get it to pass safetyNet. Root access does work as I have installed a few modules and busy box.