Related
MANY THANKS TO REV FOR RE-WRITING THIS FOR ME!
(Post was updated on 3/23/2011)
=======================================
This post is to provide a template for using NVFlash to restore/recover your G-Tablet after suffering some kind of malfunction. Specifically, this document tries to provide ALL the information you need to use the NVFlash tool to recover the bekit 1105 software version, which has been found to be safe as a starting point for rebuilding your tablet after having a problem. This post does not include other methods of setting up NVFlash (such as installing the SDK, etc.) because this method is proven and can be easily supported.
I use Ubuntu Linux and know that the Linux instructions below are correct. Others have written Windows instructions and those too have been checked carefully and have been used before successfully.
A WARNING IN ADVANCE: NVFlash makes changes to the partition structure of your device. You should tread carefully and understand the risks. (MOD EDIT Note: It also has been noted a bunch of times that even NVFlashing your G-Tablet will not completely overwrite everything on it.)
The NVFlash setup process begins with a visit to:
http://db.tt/Wm25t7U
(Note: Sometime this DropBox is cranky. If you have trouble with it, check back later.)
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Note: The above "nvflash_gtablet_2010110500" is commonly referred to as bekit version 1105 in many posts relating to nvflashing (especially my posts).
-------------------------------------------
Installation
First, create a folder named "NVFlash" on your PC to put the needed files into and to work from. (Note: You can call it something else if you want to; we're just using "NVFlash" to keep all of us on the same page.)
Next, extract the files you downloaded from the DropBox above into the "NVFlash" directory. The files with linux and windows in the middle of then are the files for setting up NVFlash. (The are taken from the SDK and do not install the whole SDK -- just a simple, operable NVFlash for us to use here.) The files with gTablet in the middle contains the .img files with the software to go on your G-Tablet.
Third, for Windows users, you'll need to have an APX-specific USB driver for the next steps. (The Windows package bekit supplied has an .inf file in it, but the actual drivers are not there). For Linux users, you don't need an extra driver.
One source for the Windows drivers is at
http://www.myadventvega.co.uk/
Find the "Downloads" tab in the middle of the page and click on "USB System Driver" to get the files. Extract them and go down two levels to the "USB" folder -- and move that into your "NVFlash" directory. The USB folder has the .inf file for installation in it along with two other directories with drivers for the various operating systems. (Note: These drivers, which are the same as the drivers in the SDK, are proven to work with Win 7 64-bit and have the setup include to load into other versions of Windows.) Follow this narrative for actual installation of the drivers.
CHECKPOINT: At this point, you should have the nvflash files, .img files, and USB directory (and files) in you "NVFlash" directory and are ready to begin the recovery process.
Now, you will need to boot into G-Tablet APX mode: hold down the power and volume - button simultaneousl until your G-Tab comes up and the goes back to a black screen. The black screen means it is in APX mode and it is waiting to display the flashing process. In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Connect your G-Tablet to your PC using your miniUSB to USB cable that came with your tablet.
Linux users: At this point, open up a command window to the folder you created, and run this script:
./nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically. If the script does not work, make sure that the shell script and nvflash binary are set as executables.
Windows users: When you connect to the PC, the PC immediately tries to load a driver -- but since it doesn't know where the USB driver files are it will fail. Click through Start/Control Panel/Device Manager and find "APX" listed in the devices with a yellow "!" (exclamation point) on the icon. Select the APX item and find the "Update Driver" button and click it. When it asks where to search, choose the local computer manual selection choice and tell it to Browse.
Point the Browse (and the USB install) at the "USB" directory under the "NVFlash" folder. When pointed at the "USB" directory, the driver installed and I was ready to nvflash. If you go back to Device Manager after the Windows install has completed, it will show the nVidia USB drivers near the top of the USB device list.
Again, for Windows: Run this script which is in the "NVFlash" folder:
nvflash_gtablet.bat
This will wipe the device back to bekit's original TnT stock image except for user data, which is retained. Should take about a minute to run and the device will reboot itself automatically all the way to the main screen.
POST NVFlash:
When your G-Tablet has booted back to the main screen, you will have to check and make sure everything is set up. Particularly, get the wifi on and connected to the Internet. Almost immediately, you should get a notice about an OTA (over the air) update. This is the OTA Update to software version 3588. If it does, go ahead and have it do the update. From there, you can begin using your "stock 3588" G-Tablet.
If you don't get an automatic OTA notification, you can go the to manual "Update" icon on your tablet and have it check for updates -- and hopefully it will find OTA 3588.
Or, if neither of the above happen, you can download 3588 at the following link and install it manually:
http://tapntap.http.internapcdn.net/tapntap/viewsonic/update-smb_a1002-3588-user.zip
Note: Following is a STICKY from General Forum on the stock recovery process:
http://forum.xda-developers.com/showthread.php?t=892090
NOTICE: There are many threads out there with tell how to do this process. Others tell individuals' problem solving experiences. A few of them may not be right! The above process is not the only way to do this -- but it is fairly straightforward and it is proven. It is recommended for anyone who does not have experience with nvflashing.
***************************************************
Further references (since I'm not a Windows user): http://forum.xda-developers.com/show...0&postcount=28
and http://forum.tegratab.com/viewtopic....bbde76184e550a and http://wiki.tegratab.com/index.php/Nvflash_FAQ
An additional suggestion if you also want to tack on bekit's clockworkmod recovery versus standard recovery: http://forum.xda-developers.com/show...3&postcount=17
Hope this helps!
03/2011 update -- I've been told that this tool has been useful to erase ALL partitions, including user data. I believe you need to re-flash with the bekit 1105 above, AFTER you use this: http://forum.xda-developers.com/showthread.php?t=974422
04/22/2011 update -- I've built out both 1.1-3588-based and 1.2-4349-based versions that have effectively replaced bekit's 1105 image ("nvflash_gtablet_2010110500.zip"), at least on my own device - I'm also addding a clockworkmod recovery option. It is being hosted in the same location as my 1.2-based mods - I will be making updates there, from this point on (as I might update them from time to time).
(you'd still need bekit's Windows or Linux tools, keep in mind) I've been able to bring back my device back from a soft-brick several times, so I feel they are usable.
05/09/2011 update -- A reminder that these images are not being updated, here. I have a newer nvflash post over in the same site where I have my 1.2-based mods. The 1105 bekit image mentioned here is still relevant for 1.1-based ROM users, or you can use my 3588 ot 4349 solution at the other site.
05/10/2011 update -- I have PM'd the moderator to either unsticky this post and / or assign it to someone else, as I do not plan on updating it, here. I believe that there is a 3588 image in the TegraTab IRC that someone created, for example.
Looks good Roebeet. I wrote a little how to a while back on tegratab. I know you are aware but for the benefit of others I wanted to add the following.
One little thing is sometimes when you are done you will get a boot loop. I think it only may happen once as I never saw it again. The fix is to go into Clockwork and partition the internal sd card again. The old settings said 512 for memory, and 256 swap. Bekit updated Clockwork and now you can format all the way to 4gb if you like, and swap should be 0 as it is not used.
Edit: New wisdom says not to partition the internal sdcard to anything but 2048. Folks have had issues with memory errors in the market with anything bigger. 0 for a swap is also the recommendation as Android apparently does not make use of the swap.
roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse
I need help. I finally got Windows 7 to recognize the device in APX mode but how do I flash from this point. It only shows up in my Device list with all the subfolders in it.
What is this for? Restoring to factory Rom?
Thanks,
Scott
cscotty said:
What is this for? Restoring to factory Rom?
Thanks,
Scott
Click to expand...
Click to collapse
Yes, you can use it for exactly that. I believe bekit added Launcher Pro and superuser, but other than that it's a way to completely wipe the device. Moreso than a standard recovery would do.
The pre-req link doesnt work. Can you update the link?
Thanks
roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse
stanglx said:
The pre-req link doesnt work. Can you update the link?
Thanks
Click to expand...
Click to collapse
It seems to go up and down (it's bekit's dropbox). Try this:
https://www.dropbox.com/s/wrcd87u1iy31u4e
roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse
Roebeet sorry but I just noticed for noobs that the linux command needs to be
. nvflash_gtablet.sh
Also if you unzip those files into a premade directory such as "gtablet" when you unzip them each have their own directories and if you ls you can see that the bash script isn't executable from there. So you need to copy either the gtablet files into the platform folders or copy all the files inside both into your "gtablet" folder. Then you can run the ". nvflash_gtablet.sh" command and voila. Sorry I am on Ubuntu and don't know if it is different, but that is the way I run them.
No worries - all replies are welcome! the more info we have, the better.
This should be stickied. Nvflash has saved my gtab many times and I think its the reason why my gtab doesn't really encounter too many Force closes. Its the perfect method to ensure your gtab is clean.
I tried this tonight to try to get my gTablet back to stock so that I could show people how to install CWM on a video but I could get neither of my Windows 7 64-bit computers to recognize the APX .inf that was included in the pack.
I have a linux machine around here somewhere I may have to use...
ehunyadi said:
I tried this tonight to try to get my gTablet back to stock so that I could show people how to install CWM on a video but I could get neither of my Windows 7 64-bit computers to recognize the APX .inf that was included in the pack.
I have a linux machine around here somewhere I may have to use...
Click to expand...
Click to collapse
My limited experience with 64-bit Win7 -- the drivers have to be signed, or else they won't work. There's a way to disable that on boot, but you can't permanently disable it. I'm wondering if the APX USB driver is signed?
Open a command prompt as an admin and type
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
This is the only way.. dont worry if the test watermark shows up.. it wont affect anything.
Also... They have a x64 driver - read this
http://tegradeveloper.nvidia.com/tegra/forum/adb-usb-driver
Hi there,
I exchanged for a new Gtab yesterday from sears (as it had some power issues).
Today, I tried TnT 2.2 on my rooted tab (Z4 for rooting). Also have ClockworkMod .8.
I partitioned my internal SDCard. But after vanilla restore, I could find my tab space reduced to 4 gigs. What should I do to restore to full 16 gigs(14+ gigs actually).
============================================================================================================================
2. I followed your instrction and partitioned again in clockworkMod and did 4 gigs and 0 in the second one. Now it shows 11 gigs for data and 4 gigs for system.
Now I inserted an external micro SD card (16 gigs) but my storage is not seeing it. What should i do? Ignore my first part please.
Your gonna have problems later if you don't repartition to 2048 and 0
satishraman said:
Hi there,
I exchanged for a new Gtab yesterday from sears (as it had some power issues).
Today, I tried TnT 2.2 on my rooted tab (Z4 for rooting). Also have ClockworkMod .8.
I partitioned my internal SDCard. But after vanilla restore, I could find my tab space reduced to 4 gigs. What should I do to restore to full 16 gigs(14+ gigs actually).
============================================================================================================================
2. I followed your instrction and partitioned again in clockworkMod and did 4 gigs and 0 in the second one. Now it shows 11 gigs for data and 4 gigs for system.
Now I inserted an external micro SD card (16 gigs) but my storage is not seeing it. What should i do? Ignore my first part please.
Click to expand...
Click to collapse
You only have 16gb to start. Partitioning you internal to 4gb uses part of that. I would go back and only use 2gb, and 0 for swap. There are things, like the new market that break with anything but 2gb.
If you mean the settings menu is not showing your external sd card that's normal. Look in a file explorer program in the / directory. Look for SDcard2. That is your external. Same deal, look for usbdisk if you plug in a usb drive.
Roebeet
also this could be helpful to Ubuntu/linux users.
in the same directory where your flash script is there is a file that is called "gtablet.cfg" if you download the clockwork.img recovery and put it in this directory you can open up the "gtablet.cfg" with a text editor
scroll down to where you see "filename=part9.img" and replace "part9" with "clockwork" and it should now read "filename=clockwork.img" this will flash clockwork and save you a step. To change it back so you flash complete stock just edit the file again and reverse it.
romanrish said:
Roebeet
also this could be helpful to Ubuntu/linux users.
in the same directory where your flash script is there is a file that is called "gtablet.cfg" if you download the clockwork.img recovery and put it in this directory you can open up the "gtablet.cfg" with a text editor
scroll down to where you see "filename=part9.img" and replace "part9" with "clockwork" and it should now read "filename=clockwork.img" this will flash clockwork and save you a step. To change it back so you flash complete stock just edit the file again and reverse it.
Click to expand...
Click to collapse
You don't even have to do that - you can just rename part9.img to something else, and clockworkmod.img to "part9.img". That's actually what I do.
roebeet said:
You don't even have to do that - you can just rename part9.img to something else, and clockworkmod.img to "part9.img". That's actually what I do.
Click to expand...
Click to collapse
Yeah I thought about that, but figured some people might get confused and forget which one was which. Either way works as well just as long as you keep both files. You should edit your original post and add that in as an option to do at the end. It will keep some from having to look through and creating a new post cause they can't find it, and keep our forums clean.
This should definitely be stickied. Mods please?
P.S. I cannot believe how awesome this forum is(Viewsonic G Tablet). I have gone to other forums and the other devs and users are not as friendly and awesome as the ones we have here. Almost brings a tear to my eye. Great job Roebeet, this should help us noobs out a lot. LOL!
[me176c/x] [K013] How to Root and update from .182 to Lollipop release
Stock ROMs up to v.182, all languages
ASUS' Download Center for the MeMo Pad 7 Link is now inaccessible as ASUS has redesigned their site. Even the support page for this tablet no longer has any links to download ROMs/updates. Sad panda. However, the ones below (ASUS' direct links included) still work! I am also in the process of reuploading/rehosting all of these as well, so stay tuned! So far everything is rehosted on Google Drive, and I plan to add more mirrors in the next couple of days. Pleasse bear with my snarkiness, I have been up late and it's now 4am. I must crash now.
Anyway........ Enjoy!!
WW 182 Full ROM
ASUS
Google Drive
WW OTA 191
ASUS
Google Drive
Google Drive (alt)
WW OTA 198
Google Drive
WW OTA 199
Mediafire
Google Drive
WW OTA 201
Google Drive
Zippyshare (ew)
WW Lollipop release
Mediafire
Google Drive
If you have other links to share, especially direct links from ASUS or non-GDrive hosts, please feel free to post them and I will credit you!
(Manually) Flashing Updates
Sometimes (read: often) an update will fail to install and reboot, and then the tablet will claim you're up to date when you check for updates (and we know it's full of crap). So you'll have to manually update yourself, and often, if only works if you start from .182 (or above), and flash each file in consecutive order. So here's how it works. Be sure to read over this before starting, to get an idea of what's in store for you. And to be safe, read it again. And to be doubly-sure, read it AGAIN (I cannot stress this enough).
Obligatory warnings:
Your warranty (expired by now, for sure) is now null and void. Regardless of whether you do this, it's no longer valid either way! :laugh:
I am not liable for any damages to your device (or your brain) that this process may cause. What you do to your device is on you, but if you play it safe and read this all carefully (and read it again! And AGAIN!), you shouldn't have any trouble.
Instructions:
First things first, install your drivers if you haven't already, and set up the Android Platform Tools (adb and fastboot exes and such, also attached to this OP). I highly suggest trying the Latest ADB Fastboot and USB Driver installer tool for Windows by @fawazahmed0 (or the various attached drivers below, if you still somehow have trouble with getting your PC to recognize this dinosaur of a device).
Next, before we continue, make sure USB debugging is enabled on your tablet. Go to Settings > About tablet, and tap on Build Number 7 times, and you'll see a toast, "You are now a developer!" Back out once and scroll down a bit, you'll now see Developer Options. Enter, and near the top you'll see an option for USB debugging, so check that box. Plug in your tablet to the PC, then open a command line interface (Hit Windows Key + R, then type in "cmd" and press enter). Type in "adb devices" (without quotes) and look at your tablet's screen for a prompt. Check the box and tap OK. Now. back in the command prompt, press up and enter on your keyboard (which will repeat that last command), and you'll see your tablet's serial number (a string of letters/numbers) and the word "device" if you did it correctly. Now you're ready for the next part.
1. Install the "RootZenFone-1.4.6.8r.apk" (attached to this OP, below) and run it. Beware, it may have some Chinese text/Engrish. It's fairly simple to figure out though, thankfully.
2. Turn on USB debugging if you haven't already (didn't you read this first? You're already slacking!).
3. Download the zip file(s) you need and rename it update.zip and transfer it to your tablet. Or copy all files to the tablet and rename them (with a file manager of your choice, see next step) as you go.
4. Download a file manager that has root access (such as MiXplorer or Root Browser).
5. Go to / (root) and manually copy your update.zip to the /data folder.
6. Download this command file (also attached below, in a zip) and copy it to the /cache/recovery folder. This must be present each time you install an update via this method, so leave a copy on your device.
7. Back to Windows Command Prompt, run the command, "adb shell" (without quotes, as before), wait a moment for it to reload the server, then type, "su" (again, without quotes). When you type in the "su" command for the first time, it will prompt for SuperSU access on your tablet, similar to how it requested the RSA perms with adb debugging. You must allow this root permission, or the following won't work!Now, type line by line (or better yet, copy and paste into the command prompt (a right click automatically pastes copied text into it, btw):
Code:
adb shell
su
echo 'boot-recovery ' > /cache/recovery/command
echo '--update_package=/data/update.zip' >> /cache/recovery/command
echo '--wipe_cache' >> /cache/recovery/command
echo 'reboot' >> /cache/recovery/command
reboot recovery
In brief, what this means is that you just ordered the "command" file to boot as a "recovery" in order to flash the update package you copied and renamed previously. Thus, the tablet will reboot and commence flashing. At least, I think that's what's happening here. Sorry, I'm no rocket surgeon. All I know, is that it works. However, if you are getting an error during the update process, as mentioned above, you will likely have to flash the next incremental update (the one just above your current version) instead and go from there, flashing each OTA in order using the coded commands above every time. Be sure to rename EACH ZIP to "update.zip" as you do this or the command cannot find the file! Yes, this sounds like a pain, and it is! But this has worked when the direct approach had failed.
Archive folder of everything needed, on Google Drive
ROOT ZenFone FAQ has a translated guide on how to fix ptotential issues with the root process.
Credits:
@plopingo and @jerbear294 for some of the links.
@lethardicus for finding most of the OTA zips again when one weirdly went missing @fawazahmed0 for the driver installer tool
@slayeralive for providing the basis for these instructions
Nice work sub
No need for adb just copy zip ti /data and command file to /cache/recovery and reboot to recovery
@GuyInDogSuit
Update
mirrored OTA 191, 198, 199, 201 & RootZenFone-1.4.6.8r apk => https://drive.google.com/folderview?id=0B5G23fyE72tnLS0yaXlUamVmcXc&usp=sharing#list
@GuyInDogSuit @slayeralive
I've try to update manually but it failed
how to flash .182 if I'm already in .191 ?
slayeralive said:
No need for adb just copy zip ti /data and command file to /cache/recovery and reboot to recovery
Click to expand...
Click to collapse
You don't have to do all the typing anymore?
GuyInDogSuit said:
You don't have to do all the typing anymore?
Click to expand...
Click to collapse
I've try, the tablet show android logo with no command on the screen after reboot without entering command
you did something wrong. command file is just txt file , and echo command in terminal is used for writing text in txt files.try to copy command file and reboot to recovery from terminal emulator with reboot recovery command. I created this method mainly for unbricking read post
http://forum.xda-developers.com/memo-pad-7/general/unbrick-asus-memopad-7-me176c-cx-t2970049
GuyInDogSuit said:
Thanks to @plopingo and @jerbear294 for some of the links.
Click to expand...
Click to collapse
OMG, I can't believe I JUST found this thread.
I have two of these tablets that I use as wall-mounted controllers for HA. One of them accepted the OTA updates and I was able to get it to .201 and keep it rooted. The other one, no matter what I tried, would not pull down anything above the .182 it was running.
This post has EVERYTHING you need to go from whatever all the way to .201 quickly and very easily. I installed 15 Second ADB, the ASUS ADB drivers, and ran through all of the updates. This, my friends, is awesomesauce.
HUGE THANK YOU to @GuyInDogSuit, @plopingo, and @jerbear294!
No luck
im on .182. When I move the files to the directories and reboot to recovery it fails. i get an error. Could this be becuase i had modified the build prop with xblast
peldo123 said:
im on .182. When I move the files to the directories and reboot to recovery it fails. i get an error. Could this be becuase i had modified the build prop with xblast
Click to expand...
Click to collapse
It could. I have made that last year and end up with a bricked tablet...
I had to make a complete reset.
I made a few tries until I get it right and found out that using certain terminal apps don't allow spaces between commands whilst others do... Try commands without breaks if you're using a terminal app. Or try temp cwm to update all the updates at once.
Can't get it to work
Every time i try this procedure this happens:
The tablet restarts after executing the adb shell step.
The tablet starts to update the firmware, but then suddenly throws an error. This happens with both the rom and the update files.
Anyone has any idea how to fix this?
Thx in advance!
kdlannoy said:
Every time i try this procedure this happens:
The tablet restarts after executing the adb shell step.
The tablet starts to update the firmware, but then suddenly throws an error. This happens with both the rom and the update files.
Anyone has any idea how to fix this?
Thx in advance!
Click to expand...
Click to collapse
Did you unzipped the file? You see, there's a zip inside another zip. Unzip the 1st time into root/data folder and rename it to update.zip!
This fixed it! That was a stupid mistake
kdlannoy said:
This fixed it! That was a stupid mistake
Click to expand...
Click to collapse
I'm glad it worked. I once made the same mistake.
I an on 191
there is no /cache/recovery folder
ls /cache
aplogs
backup
lost+found
modemcrash
Should i create /cache/recovery ?
mrseverin said:
I an on 191
there is no /cache/recovery folder
ls /cache
aplogs
backup
lost+found
modemcrash
Should i create /cache/recovery ?
Click to expand...
Click to collapse
Should be safe. I had a recovery folder, but nonetheless I don't see why it would harm anything.
I've had several Android devices. That was the easiest root I've ever done.
bravesoul said:
Did you unzipped the file? You see, there's a zip inside another zip. Unzip the 1st time into root/data folder and rename it to update.zip!
Click to expand...
Click to collapse
Could you give me a little more detail? I can't seem to make it work. Also, I don't have a "data" folder in /root? Can I create one? Thanks. Nevermind, I got it to work.
regele said:
Could you give me a little more detail? I can't seem to make it work. Also, I don't have a "data" folder in /root? Can I create one? Thanks. Nevermind, I got it to work.
Click to expand...
Click to collapse
"/root" isn't a folder. It's the source. For example. When you copy something to a hard drive you are copying to the root of that hard drive. The same goes with the root of the android. So. Copy the unzipped .zip file to root and to inside data folder. Rename it into update.zip and run the commands.
I realise you got it to work, but since this is a community I have explained to others.
BLU R1-HD bootloader unlock script tool, and TWRP install tool.
Download is a zip file, unpack it to somewhere you will remember. Run the dirty-cow-tool.bat // mtk-su-tool.bat
The included files and folders are set to hidden, in effort to keep them safe from accidental delete.
Must have adb+fastboot + drivers installed and setup prior to using tool
Easiest method to install adb + fastboot on windows is with "15 second adb + fastboot install TOOL"
LINK==>ADB+FASTBOOT
It is for windows
In linux :
"sudo apt-get install android-tools-adb"
"sudo apt-get install android-tools-fastboot" Some fastboot commands were missing when i used this one ie "fastboot flashing get_unlock_ability"
"sudo apt-get install fastboot" worked better when I tried. ( i used that command as a check before doing the unlock, so it was needed only for that check)
Using Tool
On Windows?
Unzip the downloaded file to a new folder, open new
folder and click on "dirty-cow-tool.bat". // "mtk-su-tool.bat"
Do the steps in order (1-2-3-4) to be unlocked, then
Step (5) to get to second page where step (1) is root
The rest is optional
On Linux?
Unzip downloaded file to new folder folder .
Open folder. Then open R1-Linux-tool-v2 folder
Open terminal from that folder and type
" . R1-HD-TOOL.sh "
Same order of steps (1,2,3,4) step (5) for extra
Steps (1 on second menu) for superSU root.
Second menu steps (2,3,4,5,6,7,8) are optional.
**Linux Note**
The tool uses "fastboot flashing get_unlock_ability" as one of the methods to check before doing the unlock.
The version of fastboot that installed with "apt-get install android-tools-fastboot" did not recognize
this command. But "apt-get install fastboot" updated some version and then the command was recognized.
******OTHER NOTES****
--- this has been mentioned in the general thread and the modified v17 thread, but It has come up again so I wanted to make note of it.----
--- The newest blu versions (V7.4.2 and V17) Have made changes to "toolbox" and this effects things like "adaway" and "titanium backup"
--- The suggested fix is to install busy-box. I have had success with the version from play store, some prefer to use f-droid version. Either one will do. Install it and open the app. From in the app you need to do an install.
CHANGE LOG
V1:. Initial release : removed
V2:. : fixed typos preventing proper function
V3:.: switch file verification to md5 check instead of "ls-l" comparison.
V4: current version: add extras page, add SU flash, de-bloat script, Added Fm Radio, Added pre-loader roll back
V5: Fixed wrong loop "goto" line that made preloader rollback do "MTK_BLU Debloat v2" instead
V6: Added manual pause to script for mods that need recovery (Extra's 5) . Added redundent recovery flash command .
Few reports of recovery "not Sticking" and needed to run the flash commands manually one by one. Maybe the redundent
flash will make it survive. If still having problem with recovery "staying install" try manually flashing
here is link to the steps needed. FLASH RECOVERY
V7 Improved logs Added line to make batch run as sub-process so if error occurs , will not close
V7.1 : Updated the fm radio install zip and include the needed selinux mode changer app
V8: fixed dependency of needing to be unzipped to location w/o spaces in name. (when used from location with spaces, tool used to fail to push needed files).
.. added more time to allow dirtycow to "spawn" its root shell. Recent testing has shown sometimes it takes longer than the 60 seconds allowed in the script. Now it is looped 3 times.
V9 Added full path to abd push lines for recovery flash files. included fastboot.exe file to address some version issue where user s version would not output text file I coded into script for a verification ( included file is called by script, no need to do anything different with it)
V10: Moved zip file to included folder to help preserve locations when unpacked, added device check before running tool; So tool not used on wrong device, Rearranged order of operations on extra's page. (recovery installed options) Push files while in android before rebooting to recovery( should improve reliability for multiple reports of not automatically installing options for some)
******I have received some reports that some devices are reporting "ro.build.product =R1_HD and not "BLU_R1_HD" like mine, so the added device check is blocking tool from starting If this happens to you , you can make edit to the .bat file like below.
Change this line
Code:
:next_check
find "BLU_R1_HD" "%~dp0workingproduct.txt"
To this
Code:
:next_check
find "R1_HD" "%~dp0workingproduct.txt"
it is line #23
V11: Updated device model verification lines
MTK-SU: Replaced all dirty-cow part with New MTK-SU binary(elf) from @diplomatic
source
Click to expand...
Click to collapse
Credits to @Diplomatic for his work on the Mtk_su that I used used to make this tool work again after Dirty-Cow was patched.
DOWNLOAD LINK
Preferred to use the Downloads tab of this thread.
Archived downloads on android file host also == link
XDA:DevDB Information
R1-HD Dirty-cow Unlock Tool, Tool/Utility for the BLU R1 HD
Contributors
mrmazak, vampirefo for his recovery, lopestom for his recovery, emc2cube for his debloat zips, christianrodher for his dirtycow method,
Source Code: https://github.com/mrmazakblu/DirtyCow-R1_HD
Version Information
Status: Testing
Current Stable Version: V11
Stable Release Date: 2017-04-11
Current Beta Version: MTK-SU
Beta Release Date: 2019-04-14
Created 2017-02-22
Last Updated 2019-04-18
Reserved
Items planed to be addressed in next release:
--Add few more file integrity checks to the extra's page
--Add copy log to clipboard option so it is easier to post log entry if needed-------*********----already-_added to github copy of batch file
--Add a verification step that checks what recovery is installed( to prevent trying to do steps on extra's page with stock recovery)
--Possibly move to a "fastboot boot recovery" instead of "adb reboot recovery" for the same reason as above
--Add wget or similar to the extra's items so initial "TOOL" size is smaller (not that 40-50MB is big, but to some it may be )
--Add additional "selinux mode changer apk" for fm radio install rather than just the note that says it needs to be found.
Reserved
Works great on OEM 6.6, thanks for the tool!
So I got the one-click-root.sh done, maybe. Can some linux users go over it, make sure I didn't do anything stupid? I don't exactly have a device to check it with atm, and I am not pro with scripting, barely novice, so it is a pretty basic conversion of the batch file. Still, it might work . Just would like a few eyes on first.
https://github.com/theredbaron1834/Scripts/blob/master/one-click-root.sh
Also, I looked at dirty-cow-tool.bat. However, wow, more an advanced batch file, and I am not sure what the first half does, so not sure how to convert . However, it seems if anyone does get it, the eqiv of goto for linux is funtions. simple cheatsheet:
Code:
function stuff {
echo "this stuff is run via the function"
{
stuff #goes to stuff and runs function
theredbaron1834 said:
So I got the one-click-root.sh done, maybe. Can some linux users go over it, make sure I didn't do anything stupid? I don't exactly have a device to check it with atm, and I am not pro with scripting, barely novice, so it is a pretty basic conversion of the batch file. Still, it might work . Just would like a few eyes on first.
https://github.com/theredbaron1834/Scripts/blob/master/one-click-root.sh
Also, I looked at dirty-cow-tool.bat. However, wow, more an advanced batch file, and I am not sure what the first half does, so not sure how to convert . However, it seems if anyone does get it, the eqiv of goto for linux is funtions. simple cheatsheet:
Code:
function stuff {
echo "this stuff is run via the function"
{
stuff #goes to stuff and runs function
Click to expand...
Click to collapse
thank you for your input.
As far as the begining of the batch, It is adding a few folders to the "path" variable so help ensure the "adb push" commands find the files it is trying to push. Then it sets some folder "flags" to hidden so that the files the batch needs don't get accidentally moved or changed. Then the large section with mostly "echo" that is to set up the "simulated" G.U.I.
The lines of just "::::::::::" are simply used to help with reading the batch file. i use them to seperate functions. They are not needed.
The lines with only 2 "::" are standard windows comment / remark line entries
The lines with 1 ":" are the beginning line of the loop/ function == the line that "goto *" searches for
Does Works to unlock 7.4.2?
khyr said:
Does Works to unlock 7.4.2?
Click to expand...
Click to collapse
It is supposed to. It is the same base codes used from original script, and that one was confirmed to work. I Do not have first hand use of V7.4.2 so it is only confirmed through other users.
The dirty-cow being used has been patched by google in Dec but blu has not rolled out the patch. So there is no reason for it not to work.
edit:
I have the linux version ready.
-the first step, (ADB Push) is ready. including md5 file checks
-step 2 is ready= running dirty-cow with md5 check before final writing to mmcblk device
-step 3 is ready unlocking bootloader = including check if unlock is done, but need to fix the "unlock_adility" check
I can make to file to compare and grep the line needed, but cannot "sed" the extra information or do a > < comparison
-step 4 is ready .--flash twrp
Finished 90% of tool.
still need to tweek the log feature.
I ran tests on the lop back to menu and test ran
1. push files for dirty-cow and md5 check . then made push fail to verify the check method was valid ==pass
2. run dirty cow commands and md5 verification on resulting file. ==pass
3.unlock bootloader --- I ran it (needed to fake the already unlocked check) it works == pass
4 . flash twrp --installed both version i have, both install fine ===pass
5 extra menus -- ran . install su-----debloat---rebloat--- add fm radio--- preloader roll back =====all pass
(bootloader roll back needs manual intervention to re-enter fastboot during the boot loop that is unavoidable)
6. instruction ====not written yet
7. exit yes it closes == pass
8. logs --- needs completeing
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
torchredfrc said:
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
Click to expand...
Click to collapse
no it does not.
the /sdcard is the internal memory and the Download folder is already there.
you might be having issues but the folder is already part of normal system
mrmazak said:
no it does not.
the /sdcard is the internal memory and the Download folder is already there.
you might be having issues but the folder is already part of normal system
Click to expand...
Click to collapse
Fair enough, my restore didn't have /sdcard/Download and I made an assumption that /sdcard was my mounted card. Thanks for the insight.
OOPS
found typo on V4 of tool. batch files sets variables for "return", from loop functions. And two returns were set to same label9, so if you had tried to do extra's menu option #8. "ROLL Back Preloader" , instead it was running option # 5. " MTK_BLU Debloat v2"
fixed and still reading and re-reading to search for errors.
This looks bad.
The reason I put together this tool was I felt it was important to make a way to minimize the problems usually associated with android modifications. By making "typo's" a thing of the past, and I found them in my own script.
re-posted V5 combined with linux V2--
torchredfrc said:
I just loaded this on my OTA updated 7.4.2 device. I would note that the batch file does not actually create the /sdcard/Download folder so you might need to go into the terminal and actually create this on your sdcard... also worth noting that this batch file **requires** an sd card in the device to do any of the loads in the "5" menu.
Click to expand...
Click to collapse
I'm a total noob, and I'd like to know how to proceed with the supersu and all the other parts of step 5. Thank you
gabriel986 said:
I'm a total noob, and I'd like to know how to proceed with the supersu and all the other parts of step 5. Thank you
Click to expand...
Click to collapse
Ok. After you have completed upto twrp install. You can do the options on #5. It is all programed and automatic. What is does is put zip files onto the phone and reboots phone into recovery, then recovery installs them.
mrmazak said:
Ok. After you have completed upto twrp install. You can do the options on #5. It is all programed and automatic. What is does is put zip files onto the phone and reboots phone into recovery, then recovery installs them.
Click to expand...
Click to collapse
I get up to the recovery installation, but then I can not access such recovery on the phone, If I turn it on with power+vol up, it takes me to the default factory recovery by blu.
And If I try to the super su step with the phone on, it resets it, and get it to the screen with the dead android, while the script just shows the ADB DETECTED message.
In case it's needed, my R1 HD is running on
BLU_R0010UU_V7.4.2_GENERIC 09-11-2016 13:38
gabriel986 said:
I get up to the recovery installation, but then I can not access such recovery on the phone, If I turn it on with power+vol up, it takes me to the default factory recovery by blu.
And If I try to the super su step with the phone on, it resets it, and get it to the screen with the dead android, while the script just shows the ADB DETECTED message.
Click to expand...
Click to collapse
You missed a step in the process.
As tool finishes the recovery install it comes to a "pause" in the script, you need to hold the volume up button on phone "before" pressing button on pc keyboard to continue.
If phone does a normal reboot at this point then the system will replace the newly installed recovery with the stock one.
Giving you the situation you have now.
This step I cannot control, you must press volume button on phone to get the boot menu, and directly boot into recovery to ensure that the install sticks.
mrmazak said:
You missed a step in the process.
As tool finishes the recovery install it comes to a "pause" in the script, you need to hold the volume up button on phone "before" pressing button on pc keyboard to continue.
If phone does a normal reboot at this point then the system will replace the newly installed recovery with the stock one.
Giving you the situation you have now.
This step I cannot control, you must press volume button on phone to get the boot menu, and directly boot into recovery to ensure that the install sticks.
Click to expand...
Click to collapse
trying again....
for how long should I press the volume up key?
gabriel986 said:
trying again....
for how long should I press the volume up key?
Click to expand...
Click to collapse
When tool says Hold button , keep it held. Then continue the script. Phone should reboot to the boot menu. Then let go of volume
Some phones do not accept the fastboot reboot command, on those phones need to hold power to shut off. Then volume and power together to come on, release power when screen come on
mrmazak said:
When tool says Hold button , keep it held. Then continue the script. Phone should reboot to the boot menu. Then let go of volume
Some phones do not accept the fastboot reboot command, on those phones need to hold power to shut off. Then volume and power together to come on, release power when screen come on
Click to expand...
Click to collapse
ok.. trying again
---------- Post added at 02:00 PM ---------- Previous post was at 01:46 PM ----------
gabriel986 said:
trying again....
for how long should I press the volume up key?
Click to expand...
Click to collapse
it beat me!
I get stuck in that part of the process, If anyone uploads a video to check what i'm doing wrong, I'll be grateful.
Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn
Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?
Matra-PB said:
Hi,
have you read the tips? It says:
"- Google play will not work right if you do not format your data partition to f2fs. (You can do this in recovery)"
Have you tried it?
Click to expand...
Click to collapse
That may not be the problem I've hear a lot of people are having this problem. But it's a good place to start if he hasn't tried it yet.
Success story upgrading A500 in 2019 July
finneus_ said:
Hey together,
I really hope someone out there is still using a A500 Tablet and may be able to help me fix a weird issue i encounter on every ROM i tried so far.
I installed the ROMs mentioned in this Thread: https://forum.xda-developers.com/iconia-a500/general/2018-a500-upgrade-threaddownloads-to-t3832293
And all of them come with the Same Problem for me.
If i try to open the Google PlayStore or something else that wants me to login into a Google Account it just says: "There was a problem communicating with Google Servers" "Try again later"
anyone knows of this issue ? All the fixes several Google searches gave me did not help to fix that issue for me on any of the ROMs.
help would be highly appreciated
kind regards
Finn
Click to expand...
Click to collapse
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
Step1a: Install a File Manager app from the Google playstore. This will help you extract the CPU ID and convert it with the SBK tool to get the SBK number/string. important steps SBK tool was available in file - SBCalc_v1.1.ZIP available in this forum.
STEP 2b: SUPERUSER and SUPERSU installation
1. Install SuperUser.apk first.. (IMP - Its available in this forum. Its like a base version for superSU to install over. If you do not install SuperUser.apk, then each time you try installing SuperSU, you would get an error message about a SU file being incompatible.)
2. Then install an older version of SuperSU downloaded from the website - filename -> eu.chainfire.supersu_v2.65-265.ZIP . Newer versions will not work. U got to install an older version as new version seems to be a paid SW.
3. Next Open SuperSU app on your tablet and let it update itself a couple of times each time opening and closing the app after the upgrade.
4. Remove SuperUser.apk file as now its no longer needed.
5. Now that you have ROOT access and SuperUSer access
6. Install Titanium Backup. File name in this forum- update-recovery-TWRP-rev2.0-beta4.ZIP . This will help you to flash/upgrade ROM software on your tablet.
Twrp 2.8:
http://www.mediafire.com/file/e7wpny5f39vw3pc/update-recovery-TWRP-rev2.0-beta4.zip/file
Compressed Archive (.ZIP)
File size: 4.91MB
Uploaded: 2018-08-14 21:40:26
https://www.mediafire.com/download/e7wpny5f39vw3pc
STEP 3: Install an Unlocked Bootloader i.e. unlocked bootloader Skrillax v9 - file name in this forum BabSector.rar or A500-Bootloader-Nvflash.ZIP
Once you have reached this step, you now have the basic tools needed for the final ROM upgrade of the tablet.
I did get error message after the reboots that happened after Unlocking the Bootloader. Someting about a LNX partition not being okay or some such msg. Each time I just WIPED the Cache and selected similar options to wipe System, Data, User, Dhelvic cache (spelling incorrect) etc. Since you have not installed the final OS or ROM for your tablet yet, no harm in deleting these partition data. Actually its recommended to wipe, format in f2f formats etc. all of which is possible using the TWRP Recovery software you installed in step 2. Choose Recovery menu option each time the tablet boots or gives errors.... using the volume rocket and power buttons. More info -> Go through this thread and install unlocked bootloader.
https://forum.xda-developers.com/showthread.php?t=1622425
Flashing Bootloader Steps
-------------------------
1. generate your SBK from cpuid
2. put tab in APX by holding reset (small pinhole bottom right side)
and pushing power for 3-4 sec. - then release reset approx 1 sec. later
the screen should be blank and power button should be lit - plug in USB to PC.
2. Run A501 A.bat - when finished reboot tab to recovery (win 7 and under
right click on A501 A.bat and select Run as Administrator)
3. run Recovery(power and volume-) ->WIPE -> "Advanced wipe ->System (only)and swipe to wipe.
4. unplug USB and reboot tab to APX
5. plug in USB afer it is in APX mode -> Run A501 B.bat (win 7 and under
right click on A501 B.bat and select Run as Administrator)
Bootloader unlock tutorial
--------------------------
Step 1: Get your cpuid - https://forum.xda-developers.com/showthread.php?t=1624645
Step 2: Convert it into an SBK - https://forum.xda-developers.com/showthread.php?t=1810618
Step 3: Download the A500 drivers
- http://www.mediafire.com/file/pde8rojv1t8gnif/USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501.zip/file
Step 4: Download the files to install the bootloader
- http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
Step 5: Follow the instructions in "how to.txt"
Step 6: Download a rom and flash in twrp
This tutorial is based of
https://forum.xda-developers.com/showthread.php?t=2450119 thread so big thanks to KaijiKun .
Bootloader unlock files:
http://www.mediafire.com/file/o7m2ouwo6zuod4d/A500-Bootloader-Nvflash.zip/file
STEP 4. Downloaded file omni-4.4.4-20150210-a500-IconiaHD.ZIP as I was not sure version omni 5.1.1 was as stable as Omni4.4.4 reading all the threads in this forum.
First rename the downloaded OMNIROM file as update.zip .
OmniRom 4.4.4
http://www.mediafire.com/file/ghd72j3g618kk9g/OMNIROM-5.1.1-Tegraowners_ROM_v13t2.zip/file
File size: 244.66MB
Uploaded: 2015-04-05 17:40:14
STEP 5: Install another tool adb_fast.ZIP. This tool is also available in this forum.
Note:You need to copy the update.zip file to your computers folder where this tool adb_fast is installed. In mine it was C:\Program files (x86)\Minimal ADB and Fastboot folder. This adb_fast file creates an application shortcut on your computer desktop. Clicking on the short cut launches adb and fast boot programs I mentioned at the beginning.
STEP 6: Copy the file to the SD card (16GB) of your tablet.
Run the adb_fast tool from your desktop shortcut. This will open a Command Prompt type black screen window where you can enter the code as given below. Note you may need to see how your SD card is listed in a file manager in your computer
Code:
adb push update.zip /mnt/sdcard/update.zip --- NOTE: this creates mnt folder on internal storage and I had to then move the file using TWRP recovery tool installed in step 2, to the SD card.
adb push < ------- is the push command.
rom.zip < ------- is the name of the Rom zip file.
/sdcard < ------- is the location your pushing the Rom to.
E.) Reboot tablet with Power+Down Arrow i.e. This will start the Upgrade process for the tablet to OMNIROM 4.4.4
-- Power Button + UP VOLUME pressed... then release Power button after LED lights.
-- System will boot to commmand prompt
STEP 7: Install GAPPS using pico gapps short version and Wipe Data/Factory reset ----------------?>and wipe cache partition?
Reboot after 1st reboot
G.) https://opengapps.org/ to install a minimal version of Google Apps on the tablet.
File name -> pa_gapps-modular-mini-4.4.4-20150410-signed.ZIP
Root tablet again and install SuperSU if you need it
other info.
You can use TWRP to flash the OmniROM on the tablet or you can use the following in worst case senario to do the same.
Code:
fastboot devices
fastboot flash update.zip -- check if syntax is ok from threads in this forum
fastboot reboot-bootloader
copied below from other threads ---->
I find that a large amount of complaints in developer threads are due to people not properly wiping before a flash.
Of course there is times when a 'dirty' flash is fine, but if you're ever not sure, wipe as cleanly as possible.
fastboot allows for about the cleanest of wipes by the way. And each partition can be done separately too.
Code:
fastboot erase system
fastboot erase data
fastboot erase cache
can all be done individually, but to do these all in one command
Code:
fastboot erase system -w
If possible I recommend to do these steps before flashing a ROM, and now that you know you can do this all within fastboot mode i suggest to try it out, its quick and painless!
Don't forget to wipe your kernel too! (fastboot erase boot)
~Important~ If your device uses an emulated SD card (as in no removable micro SD but an SD partition on phone)
Then be careful wiping data/userdata as this will erase all contents of internal SD - you are forewarned!
ADB= Android Debugging Bridge (ADB)
[TOOL]Minimal ADB and Fastboot [2-9-18]
https://forum.xda-developers.com/showthread.php?t=2317790&page=12
First a short explanation:
Fastboot, like ADB, is a tool to communicate from PC to Android phone. There are times when it is a must to use, and times when it is just helpful.
ADB is used within your recovery or within your OS, but when you are in bootloader mode and need to communicate with your phone then you need fastboot.
And you may ask why would i ever need this?
Well many reasons. Main one is knowledge, learning the ins and outs of fastboot, like learning ADB, can get you out of many jams.
And if you want to unlock your bootloader this is done through fastboot. Granted HTC's unlock is... well crap, but for a Nexus this is how its done.
One other reason I have to stress is learning for safety reasons, This is about the safest way possible to flash firmware to your phone (ie Radio, Hboot, Recovery)
Lastly you may want to know the limitations,
There are many of course, this isnt JTAG, it will not resurrect a hard brick, but it often save peoples phones from 'soft bricks' and lots of time when know how and when to use it.
Think of fastboot as the program that takes over when ADB cant be used, it works with firmware more than software.
https://forum.xda-developers.com/showthread.php?t=1624645&page=3
GUIDES
---------------
Civs Guide to flashing the bootloader http://forum.xda-developers.com/showthread.php?t=1622425
Walkthrough using APXFLASH tool at Step 6 http://forum.xda-developers.com/showthread.php?t=1624645&page=2
From Civato's OP of The Guide: nvFlashToolPackages
Skrilax_CZ bootloader thread http://forum.xda-developers.com/showthread.php?t=1619913 and should be "required reading" for anyone mucking about in their tabs internals!!!!
Rollback to HC
jazzyjames guide http://forum.xda-developers.com/showthread.php?t=1516012
Iconia Root http://forum.xda-developers.com/showthread.php?t=1138228 /gingerbreak: For returning to Honeycomb
----------------
To get my CPUID, I have followed the steps below:
Open yr file explorer, esfile explorer is a great one....navigate to:
/sys/firmware/fuse/acer_cpuid - add a zero to the front!
To get CPUID get a Root browser of some sort and go to sys/firmware/fuse/acer_cpu_id
convert my CPUID into SBK?
--------------------------
https://forum.xda-developers.com/showthread.php?t=1055354&page=6
What Does Root Give Me?
1. Full control over your system
2. Ability to alter system files. You can replace many parts of the "Android Core" with this including:
o Themes
o Core apps (maps, calendar, clock etc)
o Recovery image
o Bootloader
o Toolbox (linux binary that lets you execute simple linux commands like "ls") can be replaced with Busybox (slightly better option)
o Boot images
o Add linux binaries
3. Run special apps that need more control over the system
o SuperUser (lets you approve or deny the use of root access to any program)
o Task Manager For Root (Lets you kill apps that you otherwise could not kill)
Tether apps (like the one found at [android-wifi-tether.googlecode.com])
4. Backup your system
o You can make a folder on your SDCARD and backup all of your .APK files to your SDCARD (helps if an author decides to "upgrade" you to a version that requires you to pay to use the version you just had)
5. Relocate your (browser/maps/market) cache to your /sdcard
6. Relocate your installed applications to your /sdcard
7. Reboot your phone from the terminal app easily (su <enter> reboot <enter>)
Turn the rotation lock off.
-------------------------------------------------------
SUMMARY - Regardless of version, rooting is the same... next
** Unlock the bootloader.
** Fastboot flash a Custom Recovery (TWRP).
** Download to the Tablet, Chainfire's SuperSU root updater .zip
** Boot into the previously fastboot flashed Custom Recovery, and flash the SuperSU updater .zip.
** Reboot - you're rooted.
-------------------------------------------------------
PS. I tried to maintain a log in Notepad during my upgrade. Unfortunately did not write detailed instructions and link to required files. Above is a summary of what worked for me.
Can not root
sukasis said:
First my thanks to the forum key members for providing answers to queries and to all the key contributors of SW/ROMS in this forum. I followed the procedures from this forum to Flash / upgrade my Acer Iconia A500 on 4.0.3 ICS that was sitting in a trunk for the last few years. Summary of steps I tried out.
STEP 1: Install the Acer device drivers listed in the links in this forum on your Laptop/Computer even if by default your Windows 10 OS (assuming you are on Win10 like me) is able to recognize the A500 connected to the USB port.
USB_Acer_1.00.0524_A30HA31HA32H_A.ZIP
STEP 2: ROOTING the Acer A500.
1. The tablet should be already upgraded to stock ICS for A50x (or stock ICS A10x/A510 for other tablets).
2. On a tablet: "Settings" -> "Applications" -> "Development" -> "USB debugging" switch ON. If you do not see this menu, then click 7 times of the Android Build No. listed under settings and come back to the menu above to enable USB Debugging.
3. Connect the tablet to the computer (Before connection it is recommended to update the driver for a tablet from here: A10x, A50x, A510).
4. Since most of the discussions regarding flashing A500 were from 2011, the earlier Gingerbreak method for rooting did not work.
I downloaded the following file from this forum to root my tablet.
ICS_rooting_A10x_A5xx.zip
5. Open the directory with the unpacked archive. Execute file: for windows - runit-win.bat; for Linux - runit-linux.sh.
The root is received!
Note: The McAfee Antivirus software started tagging a file 'mempodroid' within this ZIP file Tools folder as a virus or malicious file. This rooting method uses the 'mempodroid' exploit which is detected as a VIRUS by McAfee and Qurantined. So restore from Qurantine and check list of files are still present in the folder. If not verify 8+8 files in folders again.
As per inputs in this forum, I restored the files quarantined and then suppressed McAfee SW for the duration of my upgrade activities on my laptop and was able to successfully extract all the files in the ZIP file to a local folder on the laptop. This ZIP file has adb and fastboot - two key programs useful for rooting your A500 apart from SU or superuser base file used in step 2. The file to run is the BAT file runit-win.bat if you are on windows. At the end of this step your tablet should be rooted. You may check by installing the RootCheck app from Google Playstore.
......
Click to expand...
Click to collapse
Hi sukasis, i was unable to root the tablet. I download all and run the runit.win.bat (trying normal, as admin, and open a cmd as admin and then navigate to the bat to execute).
- It say device connected
- Then push 7 files correctly
- Executing of the main script. (it freeze here a lot of time)
Then error: protocol fault (no status)
The file "su" isn't created
Not getting root!
I try in USB 3.0 and 2.0 same error.
I have windows 10.
I uncheck the Debugging mode and it's bring another error, so i believe the connection is good because in debug mode can push files.
I don't know whate else i can do.
This thread is for how to root the ATOTO A6 PF based on the root processes all over XDA on rooting Joying/FYT-based head units.
Originally I posted it here, but I decided it was worth making a new thread for. If anything needs to be clarified/changed, please let me know. As far as I know, the root process is much different from the older A6s and S8s as these units don't have the ability to ADB directly, even with USB Debugging enabled. This process takes advantage of the way these units install firmware, and uses Magisk's ability to patch images in order to generate the rooted boot image. This does not require a custom recovery at all, and is actually very straightforward.
I. PATCH YOUR BOOT IMAGE
Download the latest firmware from here. Make sure you select the correct model (in my case, A6PF -> A6G2A7PF).
Unzip the file. The default filename for my A6PF is Update-File-For-A6-PF-7-Inch-System-2022-06-11.zip for the latest at the time of posting
There is a file inside labeled 6316_1.zip. Unzip this file.
Find the boot image (aptly labelled boot.img) and send it to your mobile phone. You can upload it to your Google Drive on your PC and download it from there onto your phone, or you can use ADB. Doesn't matter.
On your mobile phone, download and install Magisk. MAKE SURE YOU ONLY IT FROM THEIR GITHUB PAGE. This is how you know it's authentic and you're not downloading malware.
Open up Magisk and click "Install". Select the option "Select and Patch a File". Find the boot image you downloaded on your phone and select it. Then hit "Let's Go". It will process and save your patched boot image to your phone and label it something like magisk_patched-#####_XXXXX.img where the "#"s are random numbers and the "X"s are random letters. Cool.
Find a way to send this back to your computer. Either Google Drive, ADB, etc.
Replace the old Boot image with the one you just patched. MAKE SURE YOU NAME IT boot.img JUST LIKE THE OLD ONE.
Zip it back up.
NOTE: If you zipped 6316_1.zip into a folder 6316_1, make sure you zip up the contents of the folder and not the folder itself. I made the mistake of zipping the folder, so my new 6316_1.zip contained a single folder 6316_1 which contained all of the new stuff. Learn from my mistake lol.
It should look like:
Code:
6316_1.zip/
├── META-INF/
├── boot.img
└── [...]
And NOT like:
Code:
6316_1.zip/
└── 6316_1/
├── META-INF/
├── boot.img
└── [...]
II. SIGN YOUR ZIP
Download SignApkv2.jar. You can get it from here. This link was pulled directly from this post.
DOWNLOAD JAVA 8. IT WILL NOT WORK WITH JAVA 11. You can get it from Oracle or you can use OpenJDK.
Copy/Paste your 6318_1.zip into the folder you downloaded SignApkv2.jar.
Run the command:
Code:
java -jar SignApkv2.jar -w -v testkey.x509.pem testkey.pk8 6218_1.zip 6318_1_signed.zip
(pulled from this post but changed the names of the files. You can also do what they did and edit the bat file and run it).
Make sure you reference the correct java here when you run this. If you have two different Java JREs/JDKs installed, try this instead (in PowerShell):
Code:
& "C:\Path\To\Java8\java.exe" -jar SignApkv2.jar -w -v testkey.x509.pem testkey.pk8 6318_1.zip 6318_1_signed.zip
Referencing my note above, check your zip file. Make sure when you unzip it, you see META-INF and boot.img immediately.
Replace the old 6318_1.zip with your new 6318_1_signed.zip in your update folder. Make sure you rename it to match.
III. INSTALL TO HEAD UNIT
Find a flash drive. Most other units use SD Cards but the A6PF gets its updates from a flash drive.
Format your flash drive to FAT32. This will remove everything on your flash drive, so make sure you save anything on there that's important somewhere else
Copy paste everything in that update folder into the flash drive. The root of the flash drive should look like:
Code:
YOUR_FLASHDRIVE
├── lsec_updatesh/
├── 6316_1.zip
├── AllAppUpdate.bin
├── logo.bmp
└── lsec631update
Turn on your head unit and insert the flash drive into the "PHONE LINK" USB cable.
After a couple seconds a "FIRMWARE DETECTED. INSTALL?" prompt will pop up. Hit "Yes" and then wait.
You'll see text on the screen as it installs. You'll occasionally get some errors, but if it succeeds overall, you'll see at the bottom it will tell you to "Remove Device" with a little countdown. Remove your USB and then wait for it to reboot.
If you see the main screen, you're almost done! Download and install Magisk on your A6PF, either through chrome or through ADB.
Open up Magisk on your A6PF and hit "Install", then you'll see a new setting "Direct Install". Click that and when it's done it'll ask you to reboot. Go ahead and reboot.
If the A6PF comes back up, you're good to go!
You should be able to grant root access to anything now through Magisk. I haven't tried Zygisk or anything like that. Just a handful of Magisk Modules like Vyper4Android.
IV. TROUBLESHOOTING
Here are some things I ran into that could help you fix any issues you need:
(NOTE: When I say "Cycle power", I mean to turn it off and on again. I tested my car unit in my house following this YouTube video to make it easier and not wear down the battery in my car. Cycling power just involves unplugging it from the wall and plugging it back in. If you use a switch or a surge protector, flipping that will work too. If you're in your car, turn it off and back on.)
Weird Fastboot screen:
Grab your USB Stick that you made to root the device and put it in the "External Storage" USB port
Cycle power
You should see the device begin to install the firmware on your USB Stick!
If it doesn't work the first time, cycle power and try it again
Incorrectly flashed image results in a bootloop:
This happened to me when I tried to flash a custom TWRP recovery. It... did not work lol so I had to flash the stock recovery.
Grab a USB Keyboard and plug it into the "External Storage" device
Turn on device (if not already)
When "ATOTO" is on screen (or whatever pic you decided to use when it boots up), hold ALT + PRINT-SCREEN. While holding those keys, press "C".
You can learn more about how "Magic SysRq" Commands work here.
This should trigger a crash and you will boot back to "fastboot". You can connect your PC via the "Phone Link" cable and use fastboot to flash your image. Since I was replacing my broken TWRP recovery with stock, I flashed my stock recovery via:
Code:
C:\path\to\img\on\pc> fastboot flash recovery recovery.img
Once it's done, unplug your USB Keyboard from the "External Storage" USB port and plug in the USB Stick that you used to root the device
Note: If you want it stock, you can use the stock firmware files. Just get it from here again and zip it into your USB Stick.
Cycle power
You should see the device begin to install the firmware on your USB Stick!
If it doesn't work the first time, cycle power and try it again
V. FURTHER THOUGHTS
Looked into using this in the lsec.sh file to make backups, but I wasn't able to get it to execute anything beyond what is originally in the file. It might have to do with how the AllAppUpdate.bin is structured with this ATOTO firmware download as opposed to how the Joying/FYT devices have theirs packed. In addition to that, to unzip the bin, it requires a password and I'm not sure what that password would be. Unpacking the file with ApkPack (linked in the OP of that thread) doesn't yield anything but a warning with strange symbols. I guess I don't really need it, but it would be nice to be able to use.
Actually discovered how to do this thanks to @surfer63's post General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware. Lots and lots of really good information there!
Wanted to try flashing a custom TWRP recovery for the device, following a combination of this XDA guide and this GitHub guide, but neither yielded any real results (other than the bootloop issue mentioned above lol).
VI. REFERENCES
Atoto A6 ( Full Root ) by @LiquidXed - Initial root process
Modding your Joying/FYT SC9853i unit without root by @surfer63 - About the inner workings of the firmware zip and what each file/script does
Rooted Atoto S8 (Ultra, probably others) using Magisck+Joying signature by @JMeister234 - Learned the process of modding the image with Magisk and signing the ZIP
[Help Thread][Atoto A6 Pro] Ask Any Question, Noob Friendly by @sd_shadow - Read a lot on the differences between the different A6 units and found some of the other root guides used to piece all of this together
Reserved
Reserved 2
do you know how to access the android system settings on this unit ..need to enable developer options and force split screen function
my head unit is A6G2A7PF , Android 10.0. I need the update.zip file to root it.
But the linked website above does not work. They deleted that page function.
Is there anyone who can share the firmware, please?
thank you
Thanks for this, trying it tomorrow. Very well put together.
Thank you for the tutorial. I was wondering, if I need to adjust the backup camera guideline, do I have to root the unit? Thanks.
Just here to say this worked perfectly for the 9-inch Atoto A6 PF. Thanks for the tutorial!
so i followed all the steps but am now stuck in boot loop and tried the keyboard trick and it didn't work. i don't remember if i have adb debug enabled or not but i have oem unlocked for the bootloader. i think i bricked that thing
Worked perfect for my 9" A6PF. Thanks/
Note that the website for the firmware has issues on computer, try it on phone!