Database Users

Magisk 8,SuperUser r277,SuperSu 2.78 SR1,xposed 86.6(magisk),xposed 86.2 (SuperSu)

Magisk v8 --> I haven't tested Magisk hide settings since I am not using SuperSu and suhide, but feel free to test and report
- Added Zenfone 2 Signature
- Point to init.aosp.rc
SuperUser r277 --> Only difference I can see between this and r272 is in hidesu. Users have reported SafetyNet still doesn't pass. I note last commit on github was 4 days ago. I'll compile again if there's any new/significant updates
superuser-r277-hidesu_x86_and fixed_for_ZF2(6.0_bootloader)_by_ameel.zip
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
superuser-r277-hidesu_x86_compiled_by_ameel.zip --> This does not work on Zenfone 2 (MM bootloader). It should work for 'regular' x86 bootloaders (e.g. Zenfone 2 running official CM13 on LP bootloader). (Also note I didn't fix the install script, so it might not actually work at all. If it doesn't let me know and I'll fix it)
- Compiled for x86
SuperSu 2.78 SR1 --> works with suhide 0.54 but is very sluggish and laggy on the Zenfone 2!
- Added Zenfone 2 Signature
Xposed 86.2 for Systemless SuperSu
- Forced oat 067
SuperUser r272 --> This contains Hidesu, which is as of time of this post the only su that passes SafetyNet
- Compiled for x86
- Fixed install scripts
- Added Zenfone 2 Signature
Magisk v7
- Added Zenfone 2 Signature
- Point to init.aosp.rc
Xposed 86.6 for Magisk (by topjohnwu)
- Forced oat 067
Note:
- Installing Magisk (even without installing xposed) causes SafetyNet to fail.
- Download and use at your own risk.
Usage:
The attached zip files need to be flashed from TWRP (or similar recovery)
VERY IMPORTANT: The Correct way to install ALL 3 is as follows:
1. Flash Magisk v7 and reboot
2. Flash SuperUser r272 and reboot
3. Flash Magisk modules
If you flash SuperUser r272 first, and flash Magisk, chances are your phone won't boot anymore (I haven't investigated why and won't bother for now).
Given that Magisk v7 fails SafetyNet even with SuperUser r272's hidesu, I wouldn't bother installing the 3 together. Either install SuperUser r272 for root that passes SafetyNet, or install Magisk or Xposed with existing root solutions (i.e. not SuperUser r272).
Credits
Credits to:
- phhusson for SuperUser, and particularly his helpful replies despite my annoying requests
- topjohnwu for magisk
- rovo89 for xposed
- ???? (not sure who to attribute credits to) for Zenfone 2 signature
Click the "Thanks!" button if my files or posts are helpful.
.

Reserved (why not?)

nice that was fast!

With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty

quick05 said:
With your supersu, we van play pokémon go thats it ? Even if i dont flash magisk?
Ty
Click to expand...
Click to collapse
Yes.

ameel said:
Yes.
Click to expand...
Click to collapse
Xposed will works or need to flash yours ?

Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?

hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.

quick05 said:
Xposed will works or need to flash yours ?
Click to expand...
Click to collapse
You can flash whichever xposed you want. I only provided the latest magisk version topjohnwu made, but fixed for Zenfone 2
Remember, if you install xposed, SafetyNet will fail.
chtan23 said:
Thanks @ameel!
At least get back my root with this new supersuhide 272.
I assume your ZF2 imei issue is fixed?
Click to expand...
Click to collapse
Yes, imei fixed
geek85 said:
hello ameel.
thanks for your work (hope you succeed to recover your phone in the process)!
I just see the SafetyNet update that fail with Magisk now (v6 or v7)
I'll test superuser while it passes safetynet. it won't last long, I presume.
Click to expand...
Click to collapse
yup, phone fixed! and yes, SafetyNet fails with Magisk installed (even without root installed). i'm sure topjohnwu will come up with something for Magisk, just have to wait i guess...

what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?

geek85 said:
what about busybox with SuperUser r272 ?
can we install it? do we have to manually move the files in a custom directory?
Click to expand...
Click to collapse
Just installed BusyBox downloaded from playstore. Granted root and installed busybox. All working. Passed SafetyNet. yay!

boss, Now how to pokemon go + root Passed SafetyNet?

chord314 said:
boss, Now how to pokemon go + root Passed SafetyNet?
Click to expand...
Click to collapse
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail

ameel said:
Flash SuperUser r272 to root and play pogo. You can't install magisk or xposed. They both cause SafetyNet to fail
Click to expand...
Click to collapse
thank^^

And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?

jman0 said:
And what if I have the phone previously rooted? Can I just flash this new superuser or should I unroot from SuperSU first?
Click to expand...
Click to collapse
unroot first (maybe use the unSU script that exist elsewhere in this forum)

All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
All this extra work just to play one game! Lol I'm glad I'm not into Pokémon Go!
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).

agm2112 said:
I was wondering the same. But I believe this is also useful for repetitive OTA flashes (no need to flash eXposed, Viper, BB, etc on every flash).
Click to expand...
Click to collapse
Very true.
Sent from my ASUS_Z00AD using Tapatalk

Dear @ameel,
Do you have any uninstaller of superUser r272??
Or can i use that one at phh superuser thread??
Thx..
Edited :
Trying flash SuperUser r272 only.. Done..
Checked SafetyNet Helper pass with green background..
Giving TB & Root Checker root acces..
Check SafetyNet Helper, it's failed with red background..
Reboot the phone and SafetyNet Helper pass again..
It's likely i must reboot the phone after giving superuser access to an app to pass SafetyNet..
Any help??
Did i do something wrong?..

[GUIDE] [F3111] HOW TO Install Magisk on Xperia XA

Steps:
1. Download Magisk V11.1 & uninstaller
2. Root device (use @rrvuhpg root guide)
3. Download and flash Systemless SuperSU
4. Reboot and fully unroot device (don't restore stock boot image)
5. Reboot
6. Reboot into recovery
7. Flash Magisk & reboot
8. Wait for device to reboot fully (it takes a long, long time)
9. Download Magisk Manager from Play Store
10. If root is there, then you're done
Alternate Method:
1. Root Device (use @rrvuhpg root guide)
2. Download and flash Systemless SuperSU
3. Reboot and install Magisk Manager from Play Store
4. Open Magisk Manager and go onto the install tab
5. Press "detect" on the boot image location section and press "Magiskify" (I kept both advanced options unchecked)
6. Once flashed and rebooted, you're done.
Notes:
1. Rebooting after flashing Magisk takes ages, if there is a problem with booting then just flash the Magisk uninstaller. Just try to wait at least 10 minutes for the reboot after flashing Magisk, just don't crap yourself and uninstall the Magisk.
If you have questions or need help, just ask.

is this for single or dual sim XA??

caosugai said:
is this for single or dual sim XA??
Click to expand...
Click to collapse
For all XA and Ultra

rrvuhpg said:
For all XA and Ultra
Click to expand...
Click to collapse
Did it work for you then?

BadmanBristow said:
Did it work for you then?
Click to expand...
Click to collapse
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).

rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Use MagiskSU instead, fully unroot device with SuperSU but don't restore the boot.img etc. Go to recovery and use the Magisk uninstaller then reflash Magisk 11.1 and if you unrooted, then it will install MagiskSU. It is Magisk's new official root

rrvuhpg said:
No problem for me on F3112 with Magisk 11.1 and SuperSu 2.79 on 33.2.B.3.105 firmware. Only SafetyNet fail (CTS profil mismatch).
Click to expand...
Click to collapse
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well

BadmanBristow said:
Also Systemless xposed causes safety net fail and you need to activate Magisk hide in the settings as well
Click to expand...
Click to collapse
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed

BadmanBristow said:
And selinuxmode needs to be enforcing but Magisk takes care of that itself so don't worry, just double check it's enforcing, Magisk will turn it permissive itself only when needed
Click to expand...
Click to collapse
Thank you for your tips but XA is not my daily phone anymore, now I have a Oneplus3 and XA is just used as test/dev unit. I hope it will help other users.

Magisk should help with maintaining root after the latest and future Xperia XA updates (most likely will work with Nougat update too)

Android Pay
does this let you use android pay

jbenitez821 said:
does this let you use android pay
Click to expand...
Click to collapse
It does, but if you use systemless xposed, you will need to disable it and then it will work.

Thank you very much for this guide.

Can't I use just Magisk installer without unrooting the rom? If I'm not wrong Magisk has is own root manager

I tryed to install Camera 60fps Recording Module but i got error the zip is stored in : intenal storage ....

Is this safety net important to have it in green to pass this CTS ? I have done method 2. Magisk manager form store and then I installed Magisk 12. In installation panel when I tap detect it detecs (auto) mmcblk. Is it all ? Does it work ?

Where can I find the Systemless SuperSU?

I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?

Veniak04 said:
I have been trying to change to Magisk with this guide but it failed in the 1st method, the 2nd one gives the root with super su but i wanted to use Magisk alone, so i have been researching and by flashing the stock boot.img (i used the one provided in the thread "Stock kernels built from sources") Magisk was installed and worked except for the SafetyNet. Do someone passes SafetyNet or have a suggestion?
Click to expand...
Click to collapse
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.

rrvuhpg said:
To pass the Safetynet check the only way is to use encrypted partition but you will lose the ability to mount/backup the /data partition with TWRP.
Click to expand...
Click to collapse
How can i encrypt it and why does it is an issue? I only want to have my phone rooted with Magisk passing SafetyNet

[GUIDE] [SD652/MTK] Magisk - How to pass Safetynet check

Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
THIS WON'T WORK WITH XPOSED FRAMEWORK INSTALLED!!
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay

Wow it worked. Thanks a lot bro.

xwml12 said:
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Click to expand...
Click to collapse
Didn't work for me. I've tried everything as stated in the instructions. I'm using an x626 and running on EUI 30s room. See what it shows from d pics below

rexmako said:
Didn't work for me. I've tried everything as stated in the instructions. I'm using an x626 and running on EUI 30s room. See what it shows from d pics below
Click to expand...
Click to collapse
Check if you don't have Xposed Framework installed, if yes uninstall it as it won't let the phone pass Safetynet check.

xwml12 said:
Check if you don't have Xposed Framework installed, if yes uninstall it as it won't let the phone pass Safetynet check.
Click to expand...
Click to collapse
I don't think I have Xposed framework, unless it's hidden somewhere in my phone. How do I check for it? I know I have some root apps installed. Apps like es explorer, root explorer and browser, BusyBox, etal

rexmako said:
I don't think I have Xposed framework, unless it's hidden somewhere in my phone. How do I check for it? I know I have some root apps installed. Apps like es explorer, root explorer and browser, BusyBox, etal
Click to expand...
Click to collapse
BusyBox... That's the problem, try without it Installed

xwml12 said:
BusyBox... That's the problem, try without it Installed
Click to expand...
Click to collapse
I just did. I've uninstalled BusyBox and still the same thing. Problem still persist. Or should I just uninstall all my root apps, including root explorer, battery fix and the rest?

After updating magisk I managed to passed safetynet check, but it still wont allow me to launch Fate/Grand Order

Dragladiator said:
After updating magisk I managed to passed safetynet check, but it still wont allow me to launch Fate/Grand Order
Click to expand...
Click to collapse
Use Magisk Hide and click on your desired apps to hide them root access.

xwml12 said:
Use Magisk Hide and click on your desired apps to hide them root access.
Click to expand...
Click to collapse
The Game is still detected Magisk even with after repacking magisk and acitve magisk hide

Dragladiator said:
The Game is still detected Magisk even with after repacking magisk and acitve magisk hide
Click to expand...
Click to collapse
In Magisk options , disable systemless hosts option and reboot .

xwml12 said:
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
THIS WON'T WORK WITH XPOSED FRAMEWORK INSTALLED!!
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Click to expand...
Click to collapse
What if custom ROMs? How do we make them pass the check using any of the above methods?

rexmako said:
What if custom ROMs? How do we make them pass the check using any of the above methods?
Click to expand...
Click to collapse
Working on all ROMS, Custom or Stock. Just follow the guide

error installing new APK:
App not installed. The package conflcts with an existing package by the same name.
x522 Le 2, LineageOS 14.1 official nightly.
help?
EDIT: Nevermind, uninstalled with TWRP and uninstall zip, noy uninstall button in manager. oops!
EDIT2: still fails cts on unofficial 17.2 with unofficial manager 09-20. on leeco x522. help?

safetynet question - cts profile false

I was running stock 7.1.1 and everything was fine. Then i decided to try LOS 15.1, with magisk 17.4 but encountered an issue with safetynet cts profile false that prevented me from using android pay. I then proceeded to flash B35 EDL, and then do the sd upgrage to Oreo B20, but i still have the same issue with failing cts profile.
AI'm no longer rooted, running stock but still fail safetynet. Any one have any ideas what I can try next? at this point i just want cts profile to pass on the current oreo b20 stock.
Thanks!

It could be that SafetyNet detects that you have an unlocked bootloader, but there are ways to hide that (custom kernel, Magisk, etc). Do you have Xposed installed? That's an automatic SN fail. You haven't changed system partition in any way at all? It's also possible that Google hasn't yet approved B20 despite it being official rather than beta. There could be other factors too. SN looks at lots of things, many of which Google won't talk about.

You need to install magisk hide props and then in a terminal
"Su"
Grant superuser
Then
"Props"
And follow the on-screen instructions. Stupid that Google pay has a problem with rooted phones as it's painfully simple to get around it
You can find magisk hide props in the "download" section of magisk manager

Check the settings in the Google play store, Device not certified can be an issue when you change Roms.
The link between the device and Google has been broken, hence the device not certified.
There is an app Device ID that can add the certification back to its original state.
Hope this helps

Turned out to be it was because of the unlocked bootloader.
funny story... i locked the bootloader without having oem unlock enabled . Got bricked, couldn't boot into EDL... so i had to take it apart and ground the test point to put it into EDL.

xavoc said:
Turned out to be it was because of the unlocked bootloader.
funny story... i locked the bootloader without having oem unlock enabled . Got bricked, couldn't boot into EDL... so i had to take it apart and ground the test point to put it into EDL.
Click to expand...
Click to collapse
There's a tool for that now; you may not have had to open it: https://forum.xda-developers.com/axon-7/how-to/salesmultidla2017-tool-to-unblick-dfu-t3854229

TPMJB said:
You need to install magisk hide props and then in a terminal
"Su"
Grant superuser
Then
"Props"
And follow the on-screen instructions. Stupid that Google pay has a problem with rooted phones as it's painfully simple to get around it
You can find magisk hide props in the "download" section of magisk manager
Click to expand...
Click to collapse
Im trying out Magisk 16.7 (I saw some posts that said 17 causes bootloops) and MM 6.0.1. I don't see hide props in downloads? What can I do to pass safetynet? Thanks
I'm now running twrp with Oreo B20 stock.

xavoc said:
Im trying out Magisk 16.7 (I saw some posts that said 17 causes bootloops) and MM 6.0.1. I don't see hide props in downloads? What can I do to pass safetynet? Thanks
I'm now running twrp with Oreo B20 stock.
Click to expand...
Click to collapse
try this thread https://forum.xda-developers.com/axon-7/development/kernel-magisk-17-stock-roms-t3856809/page2
Update to Magisk v17 and then try the above solution

xavoc said:
Im trying out Magisk 16.7 (I saw some posts that said 17 causes bootloops) and MM 6.0.1. I don't see hide props in downloads? What can I do to pass safetynet? Thanks
I'm now running twrp with Oreo B20 stock.
Click to expand...
Click to collapse
"Magisk hide props config" is literally what it is called. If you can't find it, you're doing it wrong.
If all else fails, google then install manually.

Had to upgrade to magisk 17 to see the hide prop module download. Still couldn't pass safetynet with Oreo B20. Switched to LOS 15.1 and now everything works.

cts profile fail

i went from stock everything, oem unlock, fastboot install of twrp fajita, flash stock rom downloaded from oneplus, then magisk
then i was having an issue with magisk , viper audio wasnt working properly
restarted to recovery, meant to wipe dalvik but pressed something else and borked the phone.
wiped everything, re installed the twrp recovery, re flashed zip. re flashed magisk again
now, i have to turn on magisk hide ( to pass cts profile ), which is something i never had to do before and i cant find netflix on the play store.
what can i do to correct the cts profile fail please.

Use this module: Magisk Hide Props Config
It requires: BusyBox, installer in this thread first post.
To activate the module and chose your new certified fingerprint you will need a terminal emulator, you can use any one you want really, personally I use this one.
Any questions ask.

Hi
I tried this, everything went through smoothly enough but it did not resolve the issue. To be clear this is what i did.
downloaded the magiskhide props module, installed through magisk
downloaded the busybox installer , installed through magisk
restarted
opened terminal, ran command 'props'
went through the process or redoing the files for the fingerprint reader according to make and model of my phone.
restarted
disabled magiskhide in magisk
restarted
still failing cts
did i miss something
it also mentioned that i am using a custom rom, i am using a stock rom downloaded from oneplus. i have unlocked the bootloader and am rooted using magisk .
do i need to re download and start again?
OhioYJ said:
Use this module: Magisk Hide Props Config
It requires: BusyBox, installer in this thread first post.
To activate the module and chose your new certified fingerprint you will need a terminal emulator, you can use any one you want really, personally I use this one.
Any questions ask.
Click to expand...
Click to collapse

leonzon said:
disabled magiskhide in magisk
Click to expand...
Click to collapse
Why are you disabling this? You need Magisk hide enabled. I rename Magisk as well. My phone passes safetynet and CTS. On the latest version of Magisk MagiskHide is off by default, it used to be on by default. TopJohnWu announced that a while back here.

OhioYJ said:
Why are you disabling this? You need Magisk hide enabled. I rename Magisk as well. My phone passes safetynet and CTS. On the latest version of Magisk MagiskHide is off by default, it used to be on by default. TopJohnWu announced that a while back here.
Click to expand...
Click to collapse
ok , so maybe thats all this is? damn, im sorry for wasting your time. What do you mean by you rename magisk, in the app drawer? the process?
thanks

leonzon said:
ok , so maybe thats all this is? damn, im sorry for wasting your time. What do you mean by you rename magisk, in the app drawer? the process?
thanks
Click to expand...
Click to collapse
In recent versions when you choose hide and it picks a random name for the Magisk Manager app it lets choose a name for the app instead of just Manager.