hello everyone
i have an s10 plus exynos MID
i was on a modded rom and when i went back to stock i lost usb functionality my phone does not get detected by any pc
i changed cables and cleaned the slot it still did not work
i updated through ota reaching to FUCD
i reset the phone through recovery a dozen times and still did not work
i tried another pc and still the same while the phone is turned on and while its on download mode it does not get detected at all
the phone charges just fine
when i plug a usb type c hub in it hdmi works fine and ethernet slot works as well but it does not detect any usb stick at all in all the slots
i need your help to get the FUE3 OTA zip file if anyone has it because the MID version did not get that ota thus i am stuck on FUCD
please help me
thank you..
I think this is kernel issue.you will try change your custom rom
Related
hello
i have a problem with my g928f
my issue is that it can not be regognized by the windows
i have tried at my desktop with win 10 and at my laptop with windows 7 and at both says unknown device,
i have tried everything i know of
unistall everything from the pc regarding samsung drivers
install it again , nothing
install smart switch , nothing
install kies, nothing
run odin , not even see the phone at download mode
made factory reset from recovery , nothing
charge is working just fine both from pc and my wall charger
i tried mhl hdmi and nothing happened
tried just now otg cable with a usb drive , again nothing
just a week ago i was using it just fine with my pc
should i take it to a store to check my micro usb port??
noone??
today i replaced the screen with a new one witch had a new usb dock on it and the problem is still here
i can not connect it to any pc.
i cann't flash the stock rom because odin is not see it also
is it possible to be a rom problem????
i can't flash the stock one because of the usb issue
but i think i can download another lollipop rom to give it a try.
Have you made sure that it is set as MTP?
Setting - Storage - USB.
Check if the device gets connected in Fastboot mode. If it doesn't then it would be your USB.
sideload is not working either
usb is brand new and original.
is there a way to flash stock rom via recovery?
Hello, today my S7 Edge suddenly stopped fast charging. I noticed because the screen went on and changed to Cable Charging and 7 hours left to full charge! I tested with different cables, different adaptative fast chargers, noting. Standard wireless charging works as usual. I connected to my Mac, nothing, to a PC, nothign. My OTG USB doesnt work either. Never in contact with water, never dropped, the only thing I flashed STOCK german firmware from sammobile since day 1.
I have read that this is a thing, i will contact my provider. My question is, is there any way to flash Stock Firmware from SD Card using Stock Recovery? I can´t think of another way to flashing since the USB port is partly gone. Thanks in advance
boot to recovery then it should have flash option then go to sdcard directory and done!
http://lifehacker.com/how-to-flash-a-rom-to-your-android-phone-30885281
:good:
thanks for your answer. is it possible to use a ZIP file from stock firmware downloaded from sammobile? i mean if its contents are appropiate for this kind of flashing
Hi All
I am looking for an update.zip file I can use to flash the stock 6.0.1 rom again over my existing version to fix a USB connection issue. I need a Samsung OTA update.zip which can be flashed from the stock recovery via an sd card.
This has come to light as I've recently tried to update my note 4 to nougat but came across an issue where the phone will not connect with my PC via USB. I have tried all the usual tricks on the phone (dev options, usb debugging, MTP+ADB etc) but nothing was working. In the end I have replaced the micro usb daughter board on the phone thinking there must be an issue with the data pins but the phone still refuses to connect but charges fine. Strangely the phone thinks it's connected fine but the PC says it is not getting a device descriptor response. I have checked drivers etc and also tried 3 other PCs all of which connect to my old S4 without issue. I have also tried various USB cables including a new genuine samsung one.
Due to not being able to connect to a PC in any mode (such as odin download mode or recovery) and having the stock recovery without root my only hope is that a new update.zip will sort out corruption from the last OTA update. I believe this may be the reason as I was able to connect fine until the most recent update a couple of weeks ago. I have tried using a zip from the samfirm downloader but the recovery failed immediately with 'unable to map file'
Any help you guys can give would be greatly appreciated as I really don't want to be stuck on Marshmallow now Samsung will no longer be updating the Note 4.
I have tried connecting in MTP mode, odin download and recovery mode with usb debug both on and off
Many Thanks
Luke
I cannot connect my OPT to a computer to transfer files. I have tried using an OTG cable with a flash drive, that does not work. I have tried a different computer and cable. I am able to transfer with a Nexbit Robin just fine, same cable and computer. There is no notification to change charging mode when I plug my device in but I can change it in developer settings; neither MTP nor PTP work. I am currently on Cosmic-OS 1.4 (Android 7.1.1). Any help is appreciated!
Same thing happening to me, tried mivi cable that works well on my friend's op2 but not on mine then gave it to service center (not exclusive) for 6 days only to find out that they don't know the difference between data transfer and charging n after when i explained it to em, they had to keep it for another day or two, so i brought it back and now i am stuck with non rooted ****ty oxygen 3.5.8 with stock recovery.
divyansh sinha said:
Same thing happening to me, tried mivi cable that works well on my friend's op2 but not on mine then gave it to service center (not exclusive) for 6 days only to find out that they don't know the difference between data transfer and charging n after when i explained it to em, they had to keep it for another day or two, so i brought it back and now i am stuck with non rooted ****ty oxygen 3.5.8 with stock recovery.
Click to expand...
Click to collapse
Did they charge for the "repair"
my nexus 6 will only charge no data transfer and pc wont recognize it. When i connect it to the pc it goes staright to charge mode and the usb trident symbol doesnt ever appear. In developer options usb configure is stuck in "charge mode" only. Ive tried different roms from pie to mm . i reinstalled bootloader and radio, tried twrp back ups and still the same. Had new charging port put in phone thinking that was the problem but didnt help. Ive searched google but couldnt find anything. Any Ideas, really appreciate it thx
When I installed stock rom which was android 7.1 it changed phone back to encrypted. Now i have to format internal drive in order to install a pie rom. Does anyone think that formatting internal drive might fix problem with not being able to do anything but charge phone from usb port, because if that doesnt fix it there would be no way for me to put any rom on my internal drive to install it.. Does anyone have any suggestions
kanpol said:
When I installed stock rom which was android 7.1 it changed phone back to encrypted. Now i have to format internal drive in order to install a pie rom. Does anyone think that formatting internal drive might fix problem with not being able to do anything but charge phone from usb port, because if that doesnt fix it there would be no way for me to put any rom on my internal drive to install it.. Does anyone have any suggestions
Click to expand...
Click to collapse
Just to double check that adb devices shows your serial #. If not, it may be a driver issue.
Computer doesn’t see it, when I enter adb devices it doesn’t show up. Nothing shows up in device manager either: Also when I enter fast boot on the phone “power lower volume button” it says “connect usb data cable” I’ve trued numerous cables that work fine on my other phone. So it’s not the cable. After I plug them into phone it still says connect usb data cable.
I also have a thumb drive with a micro usb connecter that used to work on the phone. Now the phone doesn’t see it when you plug it in to the phone. But it works on my other phone so it’s not the thumb drive
kanpol said:
I also have a thumb drive with a micro usb connecter that used to work on the phone. Now the phone doesn’t see it when you plug it in to the phone. But it works on my other phone so it’s not the thumb drive
Click to expand...
Click to collapse
It sounds like a driver problem. Is it a windows PC? Have you tried installing the Google USB driver? I've had similar issues, and reinstalling the driver(s) has worked for me.
It’s windows 10 and I reinstalled driver, other thing is in my car when I plug it in to the usb slot for android auto, it doesn’t show up in my car either and it used too.
It’s like the phone is stuck in charge only mode and I can’t get it out of that
kanpol said:
It’s like the phone is stuck in charge only mode and I can’t get it out of that
Click to expand...
Click to collapse
When you connect your other phone to your PC, does its serial # show up in adb devices? If so, I'm out of suggestions.
1 more thing.. Have you enabled USB debugging in Developer Options?
Other phones shows up and in devolpers options in “usb configuration” you can set it to mtp but when you hit enter it goes back to charge only. I was on” aiop 14.0 rom” when it happened but it was working fine on that rom , then one day android auto kept saying connect usb, so when I got home I tried to plug it into pc and nothing. So I replaced charging port thinking that was problem but it didn’t help. Flashed other roms and even went back to stock, reflashed bootloader nothing helped. I was hoping someone here had seen this before cause I googled it and nothing like this could I find
kanpol said:
Other phones shows up and in devolpers options in “usb configuration” you can set it to mtp but when you hit enter it goes back to charge only. I was on” aiop 14.0 rom” when it happened but it was working fine on that rom , then one day android auto kept saying connect usb, so when I got home I tried to plug it into pc and nothing. So I replaced charging port thinking that was problem but it didn’t help. Flashed other roms and even went back to stock, reflashed bootloader nothing helped. I was hoping someone here had seen this before cause I googled it and nothing like this could I find
Click to expand...
Click to collapse
Forget USB configuration for a minute. In developer options, under debugging, USB debugging needs to be enabled.
usb debugging is enable also. even tried turning it off and back on again, didnt help.
you know when you connect phone to pc and you normally see the usb trident symbol on your phone, well when i connect it to the pc i dont see that symbol it just goes straight to charging but even charging i should still see the usb symbol and i dont,