Related
Hey guys,
The LG Nexus 4 does not have echo cancellation. What it translates to is that in VOIP calls, the recipient party can hear their voice repeated throughout a call. I noticed this especially with Fongo app. Does anyone know if there are any workarounds for this? In Fongo settings, there are:
Enable echo canceller
Enable alternate echo canceller.
I checked off both of them but the results were the same.
Suggestions?
Can anybody else connect to a WPA2 Enterprise Wi-Fi network? I get "Authentication error" every time despite using the correct settings for the networks. I'm waiting for my current month to get closer to ending before activating my Crystal (don't want to throw away too much $$$), but I doubt it is a factor.
My college uses WPA2 Enterprise for all Wi-Fi networks except for the Open network (and it's a little obvious why Open isn't a good thing...).
I even went to my school's IT department to see if there was anything they could do and weren't able to do anything. They double-checked the settings and used other profiles, and still weren't able to connect.
They say it's a firmware issue since it will connect to the Open network, and I believe them. My current phone is the LG Optimus F3 on Virgin, and it'll successfully connect to the same networks the Crystal won't on the stock firmware (ZV5), but when I update to either the ZV6 or ZV7 firmware I get the same issue: an authentication error.
Thanks.
Me too
Have the same issue. Is this a certificate issue? Seems to me i have seen this before on another device and this was the issue.
Thanks,
Phil
I too am having this issue, whenever trying to connect to the secure university website... I cannot access data and have no signal anywhere, any patches?
I contacted Sharp about it on Friday and got a call back today. The guy called right as I was about to be occupied for the next few hours, so I couldn't troubleshoot and rescheduled for tomorrow.
If it is able to be corrected, I will post the steps to do so.
piook said:
Have the same issue. Is this a certificate issue? Seems to me i have seen this before on another device and this was the issue.
Thanks,
Phil
Click to expand...
Click to collapse
It might be a certificate issue since my college specifically tells us (students) to uncheck "validate certificates" in the connection wizard when initially trying to connect to the network(s) on our laptops. The IT guy I worked with has a Galaxy S4 or 5, not sure which, with 4.4.2 and he is able to connect to the same networks I cannot.
It might be different for yours...
I spoke to the Sharp rep today and the case has been escalated since it is the "first ticket" about this issue.
He tried to walk me through manually adding the wireless network, by the + on the Wi-Fi settings page, and am still not able to connect.
Choosing either the WEP or the WPA/WPA2 PSK Security option removes the ability to add an identity to tell the network who I am, while 802.1x EAP has such option.
I think that is the issue.
I believe I was told that I would get more calls from Sharp about this; and I was given a case number and a direct callback number if I needed to call them (no, I won't share).
I too am having this issue and am keen on what Sharp has to say about it. While you have them on the phone do you mind asking them about whether or not we have a chance of seeing Lollipop on this device?
WhyPaul said:
I too am having this issue and am keen on what Sharp has to say about it. While you have them on the phone do you mind asking them about whether or not we have a chance of seeing Lollipop on this device?
Click to expand...
Click to collapse
Sure. It appears to be something Sharp would have to push an update for from what I gather with my limited technical Android knowledge and I see no harm in asking. But I make no promises of an answer.
MrTriTanium said:
Sure. It appears to be something Sharp would have to push an update for from what I gather with my limited technical Android knowledge and I see no harm in asking. But I make no promises of an answer.
Click to expand...
Click to collapse
Yeah I assume it'd have to be an OTA update etc etc I'm just hoping it's in their pipeline. I love this phone but I'm running Lollipop on my Nexus 7 and the lil Crystal is getting jealous...
WhyPaul said:
Yeah I assume it'd have to be an OTA update etc etc I'm just hoping it's in their pipeline. I love this phone but I'm running Lollipop on my Nexus 7 and the lil Crystal is getting jealous...
Click to expand...
Click to collapse
It shouldn't be too had for Sharp to get Lollipop to work since KitKat is already very stock. Plus, if Sharp is truly wanting to get back in the smartphone game in the States, they'll probably fix problems with something as important as Wi-Fi and want the latest and greatest version of Android on their current U.S. flagship to make a, material , statement to users .
would someone post a phone number so we all can call and document this problem?
It's an 844 number. It's listed in the back of the white booklet that came with your crystal. I've called and documented several issues and have a case #. This WiFi issue being one of them.
How many Boost or Virgin phones aside from the Moto G have gotten any update attention at all?
Update
Called Sharp just now and I am told that a Manager of some sorts is looking at my case and looking for a fix for "[my] particular phone." From the rep.'s recap of the notes the previous rep. left, it appears that the issue with connecting to an Enterprise network was lost in the English-to-English translation and I am apparently having issues connecting to Wi-Fi in general. Trying to clarify that the issue is only with an Enterprise security connection made no effect.
I am curious as to what that Manager or whomever calls will say in the one to two business days I was told I would receive a call-back.
I would not be surprised if there is no official fix...
Update:
They pay better attention to you if you hit them up on Facebook. I expect a call tomorrow. Among my issues/questions was an update to Lollipop. So I'll keep everyone posted.
RealiZms said:
Update:
They pay better attention to you if you hit them up on Facebook. I expect a call tomorrow. Among my issues/questions was an update to Lollipop. So I'll keep everyone posted.
Click to expand...
Click to collapse
They called less than an hour ago while I was in class. Like I expected, they assumed I am unable to connect to any Wi-Fi and had to clear that up. Now I'm told I'll get another call in another business day or two.
Forgot about asking about Lollipop. Having more people ask about it should get them in gear to bring it to the Crystal since that shows demand.
Update
Got a call back from Sharp and they ended up issuing an RMA.
It took 2 business days to get back to me to only have me try to reconnect with a slightly different security option and decide this is an issue that currently can't be fixed...
I already tried what they asked me to do and had the same error I've always had in doing so. Jeez...
Now I'm curious as to what they're going to do with my phone, or if they will fix it somehow.
I got a new phone from Sharp today and still have the same issue. There goes their "it's a hardware" problem.
I did ask about plans for a Lollipop upgrade in the future and got a stern "No." and that was it.
MrTriTanium said:
I got a new phone from Sharp today and still have the same issue. There goes their "it's a hardware" problem.
I did ask about plans for a Lollipop upgrade in the future and got a stern "No." and that was it.
Click to expand...
Click to collapse
We came across an individual with the same device, and they entered a "Connecting...Saved" cycle. It took a couple of days, but we got the device connected to our campus network (Today Actually). We had to manually import the certificate, and select it during the wireless profile configuration. Normally this isn't necessary, and it was only necessary on Nokia Symbian phones and some BlackBerries. Does your university provide a method of manually downloading the wireless certificates - specifically an option for mobile devices (Android/BlackBerry/etc)?
Cbjohns said:
We came across an individual with the same device, and they entered a "Connecting...Saved" cycle. It took a couple of days, but we got the device connected to our campus network (Today Actually). We had to manually import the certificate, and select it during the wireless profile configuration. Normally this isn't necessary, and it was only necessary on Nokia Symbian phones and some BlackBerries. Does your university provide a method of manually downloading the wireless certificates - specifically an option for mobile devices (Android/BlackBerry/etc)?
Click to expand...
Click to collapse
I just sent it out again to Sharp yesterday, so when I get it back I will ask my IT department if they will be able to do so.
I don't remember the reason why, but those who attend the same school as I have to manually configure the connection on a computer so certificates are not validated because the school servers don't send out many certificates.
I thought that might be the issue in the first place, but wasn't sure and thought to follow "proper procedures" to find a solution. Also not being able to enter a domain/ID while manually configuring a WPA/WPA2 PSK network on Android seems like a big oversight. I don't know if that's usual for that network but that possibly could have done the trick if it were an option.
MrTriTanium said:
I just sent it out again to Sharp yesterday, so when I get it back I will ask my IT department if they will be able to do so.
I don't remember the reason why, but those who attend the same school as I have to manually configure the connection on a computer so certificates are not validated because the school servers don't send out many certificates.
I thought that might be the issue in the first place, but wasn't sure and thought to follow "proper procedures" to find a solution. Also not being able to enter a domain/ID while manually configuring a WPA/WPA2 PSK network on Android seems like a big oversight. I don't know if that's usual for that network but that possibly could have done the trick if it were an option.
Click to expand...
Click to collapse
Following "Proper Procedures" is the best place to start . I suspect the problem may be one of two things:
The certificate that your university utilizes is missing from the "Trusted Certificates" on your device
The certificate IS present in your "Trusted Certificates", but the Crystal Sharp's wpa_supplicant [apologize if wrong terminology] is not utilizing it for your Wi-Fi Profile.
---------- Post added at 07:41 PM ---------- Previous post was at 07:37 PM ----------
Cbjohns said:
Following "Proper Procedures" is the best place to start . I suspect the problem may be one of two things:
The certificate that your university utilizes is missing from the "Trusted Certificates" on your device
The certificate IS present in your "Trusted Certificates", but the Crystal Sharp's wpa_supplicant [apologize if wrong terminology] is not utilizing it for your Wi-Fi Profile.
Click to expand...
Click to collapse
Your IT Department should be able to check which certificates are installed by going to "Settings -> Security -> Credential Storage -> Trusted Credentials". The option to install certificates will be down below. If you're able to manually install the right certificate and configure the wireless profile, you may see "Network may be monitored" - http://forum.xda-developers.com/showthread.php?t=2537794 Depending on what the certificate issue is, this may be something that can be permanently fixed by an update. *Note - the certificate we use is normally in the "Trusted Certificates" for Android devices, however, I'm unsure if it was present or not on our user's phone*
IT Guy at Said University Weighing In
Cbjohns said:
Following "Proper Procedures" is the best place to start . I suspect the problem may be one of two things:
The certificate that your university utilizes is missing from the "Trusted Certificates" on your device
The certificate IS present in your "Trusted Certificates", but the Crystal Sharp's wpa_supplicant [apologize if wrong terminology] is not utilizing it for your Wi-Fi Profile.
---------- Post added at 07:41 PM ---------- Previous post was at 07:37 PM ----------
Your IT Department should be able to check which certificates are installed by going to "Settings -> Security -> Credential Storage -> Trusted Credentials". The option to install certificates will be down below. If you're able to manually install the right certificate and configure the wireless profile, you may see "Network may be monitored" - http://forum.xda-developers.com/showthread.php?t=2537794 Depending on what the certificate issue is, this may be something that can be permanently fixed by an update. *Note - the certificate we use is normally in the "Trusted Certificates" for Android devices, however, I'm unsure if it was present or not on our user's phone*
Click to expand...
Click to collapse
Hey CBJohns,
I've been working with TriTanium to resolve this issue from our end. Now, I'm *incredibly* rusty with certs and my knowledge when I knew about them was limited at best. Is there any way you would be willing to go over the process you went through? We don't currently have a method of downloading the cert that I know of, and all I have at this time is the .cer file. I don't have a signed key or anything like that which makes it difficult to create a .pfx.
We are using GoDaddy certs here on campus though, which leads me to questions why it doesn't work for this specific model of phone. I don't deal with cert signing or anything like that for us though, I'm Tier II Helpdesk support for all intents and purposes.
Thanks in advance!
Something I would like to do is to make the wifi calling the preferred network. On Verizon under wifi calling the preferred network is mobile. There is no option for anything else. I spent some time chatting with google. I did some internet searches and saw that it seems like this is something on the Verizon end. I am not the only one to have noticed this. Would any of you k ow if this link and chain of command would work for my 2XL? https://www.xda-developers.com/enable-preferred-wifi-calling-option-verizon-pixel-pixel-xl/amp/
This should be pretty simple. It looks like I don't even have to enter bootloader mode for it.
Here is possibly another solution: https://forum.xda-developers.com/showthread.php?t=3696707. The author lists ADB INSTRUCTIONS half way through the post. Can I just follow these and ignore everything above it? He never mentioned being in bootloader mode for this either.
adb shell
settings put global wfc_ims_mode 2
Works. I just use airplane mode +WiFi myself tho..
Deuces said:
adb shell
settings put global wfc_ims_mode 2
Works. I just use airplane mode +WiFi myself tho..
Click to expand...
Click to collapse
Thanks for the reply. I have to make sure I understand everything I read here before I go try it. So, I hook my phone up to my PC. It doesn't even have to be in the bootloader or anything. I just have to have us debugging on. Next I pull up a power shell in the folder with the fastboot and ADB commands. Then I type in "global wfc_ims_mode 2"
Nothing will populate on the phone or power shell, but if I scroll to the wifi calling in my options I will be able to toggle between "mobile network preferred" and "wifi preferred"?
Yes while phone is booted, adb on. First you type adb shell (enter). Then the wfc command. Will not get a confirmation. I would reboot after you run it.
Thanks deuces and to everyone who replied. I'll try it and report back in the morning.
I could have sworn wifi calling wasn't supported for Verizon?
Cowbell_Guy said:
I could have sworn wifi calling wasn't supported for Verizon?
Click to expand...
Click to collapse
Here.
We did this on the original pixel phone. There were a few downsides that happened after. I believe it took out visual voicemail and a few other things in the process.
iceman4357 said:
We did this on the original pixel phone. There were a few downsides that happened after. I believe it took out visual voicemail and a few other things in the process.
Click to expand...
Click to collapse
I use Youmail so that's not an issue but I would be interested in other possible issues if anyone can remember.
I really wanna try it. It has value for me. Idk why this is an issue or something they wanna disable. I have a work iPhone 6 and it has the option. 1st off it's old and 2nd it is on VZW too. It's almost like they just don't want certain phones on wifi calling. WTH!!!?
I don't have video calling options either. What's up with that?
Cowbell_Guy said:
I could have sworn wifi calling wasn't supported for Verizon?
Click to expand...
Click to collapse
It is, and it works beautifully for me. I had used Wi-Fi calling before the P2XL with my Droid Turbo 2, and for a short time with a Moto Z Force (got it a couple of months ago from Moto as a "design refresh" for the Turbo 2 -- trading it in for 50% of the P2XL price). Although Wi-Fi calling on those other two phones worked, it is FAR more stable with the Pixel 2 XL than it ever was with the other two phones. Switching has been seamless, and the sound quality is excellent.
Schroeder09 said:
I don't have video calling options either. What's up with that?
Click to expand...
Click to collapse
Open your dialer and do *#*#4636#*#*
Phone Information
Flip all the switches on
Press update
Trigger carrier provisioning
Make sure switches stay on
Reboot
Also may need to setup Google duo for video calls
Deuces said:
Open your dialer and do *#*#4636#*#*
Phone Information
Flip all the switches on
Press update
Trigger carrier provisioning
Make sure switches stay on
Reboot
Also may need to setup Google duo for video calls
Click to expand...
Click to collapse
That worked perfectly.
I tried just toggling on and off the wifi calling switch. Does anything happen when you do that? I'm assuming it can't possibly be that easy... Just wondering if there is any other way to go about doing it besides the ADB shell
Deuces said:
Open your dialer and do *#*#4636#*#*
Phone Information
Flip all the switches on
Press update
Trigger carrier provisioning
Make sure switches stay on
Reboot
Also may need to setup Google duo for video calls
Click to expand...
Click to collapse
I entered that 4636 number in the dialer. All the bottoms were switched on. When I clicked the "trigger carrier provisioning" it registered my click because the button would flash between grey and light grey, but it didn't turn blue or anything. I also went into Google duo and turned it on. Now in my phone dialer I had the video call option. My wife and I tested it. It's functional!
Here's where I'm at with the wifi preferred calling. I had my phone on. I plugged into my pc. I went to the adb and fastboot folder. I opened the command prompt. I typed "ADB shell." The first time it took some time and it said it was activating the daemeon devices. After that I entered the "global wfc_ims_mode 2" command. It failed. I unplugged the phone and tried again. This time the ADB shell command says that it can't find any emmulator devices. Do I need to be entering these commands from the bootloader after all? There is one more thing. When I plug the phone into the PC I have options in my notification menu to turn the connection to charging, file transfer, picture transfer, or miti (I think that's what it was). Do I need to select a certain one of these for the ADB commands to register while the phone is on? Here are some pics of what in seeing now in the PC's command window.
Here is the link I downloaded onto my work computer this morning to launch the commands.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
taken from: https://wiki.lineageos.org/adb_fastboot_guide.html
Setting up adb
To use adb with your device, you’ll need to enable developer options and USB debugging:
Open Settings, and select “About”.
Tap on “Build number” seven times.
Go back, and select “Developer options”.
Scroll down, and check the “Android debugging” entry under “Debugging”.
Plug your device into your computer.
On the computer, open up a terminal/command prompt and type adb devices.
A dialog should show on your device, asking you to allow usb debugging. Check “always allow”, and choose “OK”.
Congratulations! adb is now ready to use with your device.
Deuces said:
taken from: https://wiki.lineageos.org/adb_fastboot_guide.html
Setting up adb
To use adb with your device, you’ll need to enable developer options and USB debugging:
Open Settings, and select “About”.
Tap on “Build number” seven times.
Go back, and select “Developer options”.
Scroll down, and check the “Android debugging” entry under “Debugging”.
Plug your device into your computer.
On the computer, open up a terminal/command prompt and type adb devices.
A dialog should show on your device, asking you to allow usb debugging. Check “always allow”, and choose “OK”.
Congratulations! adb is now ready to use with your device.
Click to expand...
Click to collapse
Thanks deuces. I had all this done and was still getting no where. I am travelling so I was using my work PC. I finally went down to the hotel PC, plugged in, and everything went down without a hitch. Thanks for your help everyone!
I just realized I never mentioned that I didn't mention it seems this DID take our visual voicemail. Are there any fixes for this?
I also wish it would switch between mobile and wifi calling based on which was currently better. My work phone, an iPhone, does all this. An iPhone can't possibly have one up on the Android!!!!
For what it's worth, I use Youmail so VVM is no issue. As for switching, I just put it in airplane mode and then enable Wi-Fi when I'm at home. This routine works for me.
Greetings. My computer was purchased and set up by my father, and he set up his own account as an administrator and mine as a normal user. Many of the drivers for software I needed started breaking awhile ago or outdated ones (such as the Nvidia graphics drivers) need updates. I've asked him numerous times to update the drivers and such or reinstall/ or install but he insists that it isn't necessary. I've had it with not being able to do certain things on my PC. I've asked him to give me administrative access on the computer but he wouldn't allow it. Does anyone know how I could go about doing this if it's even possible?
twistedstriker1234 said:
Greetings. My computer was purchased and set up by my father, and he set up his own account as an administrator and mine as a normal user. Many of the drivers for software I needed started breaking awhile ago or outdated ones (such as the Nvidia graphics drivers) need updates. I've asked him numerous times to update the drivers and such or reinstall/ or install but he insists that it isn't necessary. I've had it with not being able to do certain things on my PC. I've asked him to give me administrative access on the computer but he wouldn't allow it. Does anyone know how I could go about doing this if it's even possible?
Click to expand...
Click to collapse
This is almost the EXACT situation that led me to learning to bypass & crack his password (back on Windows 2000!) which then led me to becoming self-taught in Windows and troubleshooting which then led me to building PCs & hardware which, in the end (finding I had an interest and affinity to it), led me to becoming a computer technician! It's nostalgic to see history repeating itself in another way 2 decades later...
So I can definitely sympathize and can't help but reach out, even if this thread might have expired (it's been 11 days) and/or the (new) OP won't check on this anymore...
"Cracking" your dad's password seems to still use the same general steps, but since it's been crazy long since Windows XP and the software I used isn't active or applicable any longer, I couldn't walk you through it here...
The best idea I have for your situation is to get an elevated (meaning w/ administrative privileges) command prompt and either use that to change your account type to one in the "Administrator" group or even activating the ever so elusive Administrator account; so you could login to that one and/or give your own account the privileges.
As stated, for all who are interested/looking. The CURRENT Firestick 4k , direct from Amazon is still 100% Unlock/Rootable. I have had the first release, for a while and it finally burned out. So i took the plunge and ordered a brand new one. Obviously it goes without saying that there is only 1 generation of Firestick 4k, but there have been many reports of ppl not being able to run the script on them. Well i am here to confirm that straight OOB direct from Amazon you will get a stick that has no newer than 6.2.8.1 on it, and if you immediately crash the update from installing via the initial setup, you can enable dev options, usb debug, and run the OTA disable app to erase the downloaded update, and block the update channels that are normally contacted. (search forum for the TDUK Firestick Update Blocker). Then it is completely safe to connect back to your network to quickly log into your amazon account, and then disconnect again IMMEDIATELY once completed. (Failure to disconnect immediately will allow built in scripts to start the update download again in the background and then either once you let the device go to sleep, or if you accidentally reboot, it will auto install on the next load!) But if you completed the 1st part, then you're good to go on using the Kamakiri 2.0.1 scripts to Unlock/Twrp/Root without having to open your stick up. EZ - Peezy. 5 min and my stick is ready to re-customize like i want, but i get the new remote, and it seems a bit snappier... might be just me.
*Also, for those who dont have an OTG, or dont want to use one: simple process is to unplug the usb cable from the OEM adapter that comes with the stick, and plug that straight into your computer. 1st get your linux / fireiso environment ready, and have Kamakiri already on the "Waiting for Device" prompt... Then unplug from your adapter block, and plug right into your PC's USB port. Script should immediately take action, and you're still connected to your TV, so after running the 'fastboot-step.sh' , you will see TWRP on your TV. Now just run "adb shell" , in your same terminal window you have open. Then use TWRP cli to install Magisk, or flash your Rom /whatever you plan on doing. No need to swipe to allow modifications, cuz running "twrp install <whatever you want.zip>, it will automatically bypass that for you.*
hope this info helps somebody!
(PS. DO NOT choose to have Amazon link your device, in the ordering screen. It will offer this before checkout, and I'm almost positive that if you do this, then they open the package and setup your stick for you, thus almost guaranteed they will install the current updated firmware, which is said to block the pre-loader setup ... you want a virgin Firestick, untouched by their grubby little update installing hands! lol)
beatbreakee said:
But if you completed the 1st part, then you're good to go on using the Kamakiri 2.0.1 scripts to Unlock/Twrp/Root without having to open your stick up. EZ - Peezy.
Click to expand...
Click to collapse
We are good to go on using kamakiri 2.x just out of the box...
Thats the safest way, no need to do anything infront of the unlock.
Sus_i said:
We are good to go on using kamakiri 2.x just out of the box...
Thats the safest way, no need to do anything infront of the unlock.
Click to expand...
Click to collapse
true, thats what i was confirming, because several threads in this and the other android development forum had replies from ppl who claimed that the currently sold Firestick 4k was being shipped with a version of FireOS that was not exploitable via the Kamakiri method... basically claiming that the 2018 firestick 4k (as marketed by Amazon) and the CURRENT released 4k are somehow different, which in fact they are absolutely NOT. Theres not a single difference in the board layout or chipset.
Then theres ppl claiming that the updated builds after 6.2.8.1 have patched the access to the pre-loader. Well even if that was true, there would have to be some form of hardware modification that would have had to take place, or at the bare minimum Amazon would have had to trigger an E-fuse to be blown during your initial setup, that would make it unable to downgrade via the short method. BUT they did do exactly that with the Firestick 2nd Gens, that were re-released as some other model, i forget. But i know for a fact that this did happen because i have 3 of those which do not recognize the short, and will not advance past the very 1st file when connected using the NO SHORT method. They freeze immediately and lock up the process. So i was simply doing both a CONFIRMATION to those who stated that there were no UNLOCKABLE versions being sold by Amazon right now, because that is an outright lie... The ONLY firestick 4k being sold by Amazon IS the Unlockable version.... AFAIK the only BLOCKED version being sold is the 4k Max... There is not a "NOT UNLOCKABLE" Firestick 4k being sold anywhere. BUT i also was warning everyone that if you DO purchase a new 4k with the intent of unlocking it, that they need to be aware that Amazon is sneaking an option into the order where you can just check YES and it will come pre-connected to your prime account.
(Some lesser knowing individual might see this as a GOOD OPTION, because they think they wont have to worry about connecting it to the internet to set it up, and risk updating the firmware... but this is EXACTLY Amazon's intent; They WANT ppl to have them link the device before they ship it because that insures that the newest FW is installed onto it, before it leaves the warehouse, thus rendering any mitigations useless if indeed they have patched out the pre-loader exploit!)
I have a few friends in the Software dev team in Cali, and they have told me it is COMPLETELY an ongoing process to disable or nullify all possible methods to Unlock/Alter the bootloader of some current, and ALL future FireOS devices, because they have gotten some pretty nasty legal issues directed at them for allowing system mods that are enabling these 3rd party apps which provide access to Unreleased and In theatre Movies, as well as FREE access to many of the paid streaming platforms! Paramount, Peacock, Hulu, and HBO to name a few have all blamed Amazon for not doing something to prevent the installation of these apps and services which are cutting into their profit margin. Mainly because companies like ROKU disabled all access to their Custom channel lineup, and the ability to use secret codes to install 3rd party apps, on ALL their devices, new and old!.
So just was warning any "Novelty" unlockers, that they need to make sure to not allow Amazon to pre-configure their devices. Hell several features have been removed already in just a few builds... namely the Permissions manager. I hsve one 4k stick here now that is UNLOCKED but the owner has installed several OTA updates to keep it current, and there is literally NO PERMISSIONS manager AT ALL, so several 3rd party apps wont even load. It also has no way to install the Settings V2, so theres, 1. No permission mgr, AND 2. No Accessibility options to grant access for some apps which request it.
Just as a FYI, I also unlocked my new sheldonp (I ordered it on Prime Day) without any problem. Just make sure to run the unlock exploit before powering on the device.
sooo if I got my 4k max today, I should not power it on, and wait for unlock release, right?
ForbEx said:
sooo if I got my 4k max today, I should not power it on, and wait for unlock release, right?
Click to expand...
Click to collapse
Yes
Hmm let me get straight. Tomorrow I will get my 4k (non max) and I'm from Europe. Can't I power it on to see the firmware version? I bought it to escape from sony tv bloatware. Can't be still in the matrix please I'm looking into removing bloatware, root or no root as required to get the job done. I will use it only with kodi for local content. That's it.
ycodryn said:
Hmm let me get straight. Tomorrow I will get my 4k (non max) and I'm from Europe. Can't I power it on to see the firmware version?
Click to expand...
Click to collapse
No
ycodryn said:
I bought it to escape from sony tv bloatware. Can't be still in the matrix please I'm looking into removing bloatware, root or no root as required to get the job done. I will use it only with kodi for local content. That's it.
Click to expand...
Click to collapse
The best is if you try the unlock first, kamakiri 2.1 from this thread:
[UNLOCK][ROOT][TWRP][UNBRICK] Fire TV Stick 4K (mantis)
NOTE: There have been multiple reports of devices with serial numbers containing VM190 or higher being shipped with DL-Mode disabled in BROM. These devices cannot be unlocked using kamakiri. These devices do not show up at all on USB when...
forum.xda-developers.com
Note: The 'shorting' isn't necessary anymore... and it's very easy to do it now, you can see the updated procedere (or lets say guide) in this threads OP:
[UNLOCK][ROOT][TWRP][UNBRICK] Fire TV Stick 3 and Fire TV Stick Lite (sheldon/p)
Read this whole guide before starting. This is for the 3rd gen Fire TV Stick (sheldonp) and Fire TV Stick Lite (sheldon). NOTE: FireOS < 7.2.7.3 required NOTE: This process does not require you to open your device. What you need: A Linux...
forum.xda-developers.com
Thank you for your time. I will read the threads and comeback with some info.
Ok stick arrived, is with VM10137. Now is rooted and working. Thanks again.
I've got mine from Blackfriday sales in Europe. Germany to be exact.
Never turned it on once. Did not connect to internet.
I always get "RuntimeError: ERROR: Serial protocol mismatch, expected 0000 got 2001"
on executing bootrom-step.sh
Boot-Fastboot.sh ran just fine saying "preloader ready, sending FACTACT"
I'm not sure if that means patched.
yes i can also confirm. i bought one a month ago and unlocked it out of the box no prob. I got excited so ordered a second and that one (same process) is giving me the 0000 got 2001 error also.
beatbreakee said:
and if you immediately crash the update from installing via the initial setup
Click to expand...
Click to collapse
Can anyone please point me to instructions on how to do this?
beatbreakee said:
because they have gotten some pretty nasty legal issues directed at them for allowing system mods that are enabling these 3rd party apps
Click to expand...
Click to collapse
IMHO, these Amazon claims do not hold water. I can buy a Dell computer that can do all those "nasty" things with apps, and Dell will not get into legal issues.
ahsad said:
Can anyone please point me to instructions on how to do this?
Click to expand...
Click to collapse
As soon as you connect to WiFi during setup you will see checking for updates. Hold 'back'+'menu' on the remote for 5sec as soon as you see this screen. It will open an accessibility screen, just tap 'back' on the remote, and the update step is skipped.
You can either throttle your internet connection to give you more time on the checking for updates screen, or just unplug your router when you see that screen.
===========
Alternatively, when you are setting up WiFi (entering your password), tap on Advanced on the onscreen keyboard, enter Ighor's DNS address for DNS1 + DNS2, and the stick will be blocked from downloading updates right away. Then use back+menu to skip the check for updates screen.
Is "Ighors DNS address for DNS1 + DNS2" the exact command, or should I put in the actual IPs for the DNS servers? If I am to enter IPs is the + necessary?
Did you mean to type "ignore" or is "lghors" what I really should type?
ahsad said:
Is "Ighors DNS address for DNS1 + DNS2" the exact command, or should I put in the actual IPs for the DNS servers? If I am to enter IPs is the + necessary?
Did you mean to type "ignore" or is "lghors" what I really should type?
Click to expand...
Click to collapse
Yes Ighor, not ignore . Click on that link, and it has step by step information how how to fill out the advanced WiFi settings.
When you get to the option to enter the DNS, you need to enter the DNS IP address corresponding to one of Ighor's DNS servers (choose the one that corresponds to your geographical region).
Ighor's DNS servers block the addresses that serve Amazon's OTA updates. By using them in your advanced WiFi settings, you are blocking your FireTV from connecting to them.
Thank you. I am new to the forum and did not catch that the blue writing was a link. I clicked it this time.
do i need to solder or anything to root this? tired in the past but failed. would love to root the 4k i have. its sitting on an OLD 6.x.x.x update. the custom launcher still boots by default without issue
this.guy.lol said:
do i need to solder or anything to root this?
Click to expand...
Click to collapse
I am new here. That being said, what I have read here, and in another thread, indicated the disassembly and shorting are no longer needed. See message #2 of this thread.