I have an H910A that I'm currently running with Lineage OS 17.1 on Cricket Wireless.
I wanted to try out Mint Mobile (which is TMobile MVNO), so i picked up one of their little $2 7-day trial SIM cards. I wasn't aware that TMobile\Mint already implemented the VOLTE requirement in January 2021 (vs 2022 for AT&T), so I'm not able to make voice calls when using the Mint-Mobile SIM card in my phone.
If i were to go back to a stock-based ROM, supposedly this would fix VOLTE for AT&T/Cricket, but my question is will it also make it work with TMobile's VOLTE?
I get band 12 LTE where I'm at on my phone on the TMobile/Mint network and texts, data work on the phone, just no voice calls.
Related
The Unlocked Moto G4 Play, XT1607, is suppose to work out the box on all 4 US carriers. Which means it should also work on all MVNO's too. So, what's the experience out there for those that are using it? any troubles getting it to activate? In particular, with verizon or sprint or their MVNO's? Is it passing Sprints FEC? whitelisted?
Personally, I've tested a CC XT1607. I had to get a SIM unlock code since it was locked to CC. It wont work on Sprint because its CC branded and therfore, not on sprints whitelist. It appears to work on GSM- I've tested with a freedompop global SIM and after putting in the APN, and it seems to work ok. However, I haven't been able to get it to connect to Verzion. I'm testing with an activated BOOM mobile "V" SIM, and haven't been able to get it to connect, even after calling BOOM support...
I'm on H2O Wireless using this phone, works fine. They are an MVNO of AT&T. I have an older Verizon SIM card laying around that I want to see if it will work in the XT1607 here soon
Tracfone BYOP here (GSM-ATT) on XT1607. Before CM, was a little finicky with APN settings. Though the real issue I had was when I lost my number (it ported back to my old phone and TF had to ship FOUR sim cards to fix). After putting CM in, I've noticed the cell antenna is more sensitive. It will show reception even when IP is unavailable (denoted by a black X on the signal icon; this happened during a recent power failure and the cell towers were at capacity). When there are multiple towers in area, it swaps between them constantly (2 bars -> 0 bars -> 2 bars -> etc.) but my LTE is still rock solid at about 10Mbit.
No issues w/Verizon on unlocked, rooted XT1607 with stock ROM. Dropped in SIM from Droid Mini (required adapter) and was off to the races. Only minor glitch was healthy spamming of com.phone.android has stopped FCs which was quickly rectified by clearing cached data. Voice and data operate with expected clarity and speed.
smithbobbyjoe said:
The Unlocked Moto G4 Play, XT1607, is suppose to work out the box on all 4 US carriers. Which means it should also work on all MVNO's too. So, what's the experience out there for those that are using it? any troubles getting it to activate? In particular, with verizon or sprint or their MVNO's? Is it passing Sprints FEC? whitelisted?
Personally, I've tested a CC XT1607. I had to get a SIM unlock code since it was locked to CC. It wont work on Sprint because its CC branded and therfore, not on sprints whitelist. It appears to work on GSM- I've tested with a freedompop global SIM and after putting in the APN, and it seems to work ok. However, I haven't been able to get it to connect to Verzion. I'm testing with an activated BOOM mobile "V" SIM, and haven't been able to get it to connect, even after calling BOOM support...
Click to expand...
Click to collapse
My xt1607 is working fine on Ting MVNO using their GSM side that is on the T-Mobile network. I've seen band 12 (700 MHz extended range) occasionally and VoLTE seems to be used.
I've used my XT1607 on T-mobile (briefly), AT&T MVNO (FreedomPOP), and Sprint. Also roamed in about 8 other countries in Europe and Asia via Sprint Global Roaming, and used prepaid SIMs to access 2 non-USA GSM/LTE networks.
Works great on all GSM/LTE networks.
As usual, Sprint's crappy network technology gets the short end of the stick. On stock ROM, PRL/profile updating usually works, but **non-stock ROMs cannot update it**.
If you are going to run a non-stock ROM on Sprint, **back up your EFS partitions** before flashing to a non-stock ROM; restoring them will help you fix network connectivity issues without the hassle of flashing back to stock.
Looking at the LTE bands, it seems to have the main ones needed for Verizon service. I don't want to buy the CDMA version in case I need to switch in the near future.
No. Bands may be the same but the radios in the device are different.
Yeah the one I been using the past month only worked with GSM sims. I been using a T-Mobile sim
It does "work" for LTE and data. You will have issues with voice calls though since VOLTE is packaged as part of Verizon's Advanced calling. If you HAVE to use it, set up a google voice or SIP account to forward to your Verizon number. That being said, wait for the CDMA version to be available to have full functionality.
I have an unlocked Galaxy S7 Edge (SM-G935U). My carrier is Total Wireless (Verizon MVNO). I recently got a new office at work, and the Verizon coverage in this part of the building is terrible. I use wifi for data but cellular calling basically doesn't work at all.
I've been looking at other networks, and I'm leaning toward T-Mobile or MetroPCS, one of the reasons being they have wifi calling and the wifi at my office is plenty fast. I checked in settings to see the wifi calling option, but when I go to settings > connections > more connection settings, which is where the wifi calling setting is supposed to be, there's nothing about wifi calling.
I had a thought that maybe the wifi calling option isn't there because my current carrier doesn't support wifi calling, so I contacted Samsung support. I asked if I get a SIM from a carrier that supports wifi calling, would the wifi calling option be enabled. They said that unlocked phones don't support wifi calling at all.
This confuses me, because this thread mentions some people were able to use T-Mobile wifi calling on an unlocked S7/S7Edge. But that thread is older, so maybe for some reason wifi calling was removed from the unlocked S7 Edge with the Nougat update?
I suppose the only way to find out for sure is to get a T-Mobile or MetroPCS SIM and see what happens. But is anyone able to shed some light on if this is even worth trying? I suppose it's also worth trying out just to see if regular cellular calling on T-Mobile might be fine at my new desk, but hopefully there's some way to do wifi calling.
Unfortunately I think you need the sm-g935f to get t mobile wifi calling. Don't think it was ever achieved on the U models
I had an s7 edge from T-Mobile (SM-G935T) but I flashed the unlocked firmware essentially making it a SM-G935U and I had VoLTE and Wifi calling working with no issues. It was about a month ago, so it was on Nougat. I would expect no issues with an actual SM-G935U on T-Mobile.
Well, I answered my own question. I switched over to the T-Mobile 10 GB $50/month prepaid plan and when I changed SIMs the phone gave me a "reconfiguring your device for new SIM card" message. Wifi calling is now active.
Also, this is a list of phones that support T-Mobile wifi calling. I probably should've checked here first.
http://www.spectrumgateway.com/compatible-phones
Long and short is that I cannot get dual SIM working properly and I am on beta 32. Is dual sim fully supported on beta releases?
My issue occurs when I am using a T-mobile and AT&T sim. I am not getting tmobile wifi calling, or AT&T calling over LTE when I am using AT&T as my data sim choice. When I use T-mobile as my data sim choice,
T-mobile wifi calling works and voice over LTE with AT&T works.
Ideally, I want to use my AT&T sim for data and have both tmobile wifi calling working and AT&T calling over LTE working.
Wondering if the beta is causing the issue?
If anyone is not on the beta and dual sim is working for them in a scenario similar to the one I mentioned, I'd love to have your feedback.
Thank you.
I have a flame (Google Fi store variant) on Sprint Billing T-mobile network using a physical nano Sim (TNX) and I self activated it a couple of weeks ago. I understand that all newly activated devices need to be VoLTE compliant. I fervently believe that my device is making and receiving calls using VoLTE when on LTE and using WiFi calling on my home network.
My question is why does my handset lie to my network cell information app and say it's VoLTE capable No. It does show WiFi call available Yes?