Hi,
I used the delete my 5 faves cab, and I understand that it just stops the program from running. I have noticed that my faves takes up a lot of program memory. Is it safe to remove the my fave 5 apps from my wing? Also what programs do I remove in order to get rid of my 5 faves completely?
I have also tried to remove My Documents\Icons and it says that it is part of the system file and may damage the system if I remove. Is this safe? I assume that the icons (family, friends, sports, etc) are part of the my 5 faves apps.
I have searched the forums and the internet for an anwser so I can delete these items without any worries. So far I can't find a solid anwser that makes me comfortable. I am still pretty new to all this. Any help would be appreciated.
Thanks
It's kinda baked into the rom that tmo gives you. I suggest that you flash one of the ROMS in our rom development section
Thanks for the reply. I think that i have already spent way too much time messing around with my wing for now. I have HTC home installed, lots of registry tweaks and cabs. I also have opera installed (thanks for all the non replys) j/k. Im pretty happy with how my wing is set up for the time being. I would like to use it as is for now, and probably start messing around with roms at a later time, when I get tired of what I have.
If it is not safe to get rid of the 5 faves, what about the icons? When you go to file explorer/my device/my documents/my icons, there are four folders(Buddies, Family, Fun, Sports) with images in them. I would like to delete them and maybe free up about 2m of program memory. When I try to delete, it states that the file is a system file. "If you remove it, your device or one of your programs may no longer work correctly". I think that it would be ok, because they are just images, but I don't want to risk anything unless i'm totally sure. Any expert advise would be greatly appreciated.
Thanks
you're freeing up STORAGE memory, not program memory. ROM not RAM. Anyway, if you used the delete myfaves cab, it won't run.
If the files are baked directly into the rom, you can delete them but they will restore on the next reset
Jeez, thanks for not being such a jerk about it. It's not like im trying to be mean. Did i mention that i was pretty new to this? I'm sure you never made a mistake in your entire life.
"If the files are baked directly into the rom, you can delete them but they will restore on the next reset"
If you had said this first, instead of, "It's kinda baked into the rom that tmo gives you." It would have been a lot more clear to a noob. So instead of getting irritated at my lack of knowledge, I think your lack of an explanation is what made thing harder.
But thanks anyways (filled with sarcasm to make things more clear).
no no no. i'm not trying to be a jerk (yes i get the sarcasm)
there is a distinct and important difference between storage and program memory. and i assumed you knew about the sys files.
Yeah, im sorry for being so defensive. Im just tired of running into so many mean spirited people online that i automatically think the worst. It's so suprising at just how mean a lot of people really are.
Anyways, i do know the diffrence between storage and program memory. I just got it mixed up. I also know the difference between Rom and Ram, but i did a lot of drugs when i was a teenager. Thanks for the info about the system files. I just learned something new today (with no hint of sarcasm).
The only work around I came across without flashing was this reg edit which turns it "off". First back ur regisrty settings using a app like "sprite backup" because u may have a problem with ur "faves" showing in ur call logs after disabling it. After editing ur registry make a few test calls to & from ur faves to see if they were logged. If they didnt restore ur settings & try again. For me it work but afew times at the start of my bill cycle a ota was sent which reactivated it. I just disabled it again.
HKLM > SOFTWARE > HTC > My5 > SMSC > CmdGet > StateRequest
Open value ClientService and change the value from 1 to 0.
edit: Disabling/deleting the "myfave" files doesnt hurt anything. All my 5 numbers have been logged correctly since I disabled it. It also worked without problems when I was using a custom rom. From the commercials I thought I would like it but its slows the phone even more & eye sore especially on phones with smaller screens.
is there any way to have it in a cab like that it will work with a cooked rom bc i will love to have myfave work with a manilla rom
Since the Fire does not have external storage, Titanium BU appears to make a folder in another folder called SD (if I recall correctly).
If I have to reset the Fire back to factory for any reason (say for instance, your mom accidentally sets a lock password and then forgets it ), wont the back up files get erased?
So assuming that is true, whats a good way to back things up? I suppose I could copy the BU folder to a PC every few weeks
TiBackup paid version can do your backup to your Dropbox account and you can then recover from there. Warning rather or very slow depending on your patience level.
Sent from my HTC Flyer P512 using Tapatalk
DB is an option, however it only gives you 2 gigs unless you pay. I want to be able to back up the entire device in case I need to restore it later.
I have rooted it, changed the launcher, installed Market, etc. I plan on editing those files to prevent the wallpaper from changing back to the default.
It's my mom's Fire. She's 85. This week she accidentally set the password lock and I had to re-set the device and start over.
I want to be ready in case something happens again.
There are tons of options...
I use TB with DB on my Droid Incredible, but I really don't depend on it. Once a week (Sundays), I connect it to my main workstation and simply copy the SDcard contents to my NAS. The 32GB SDCard only has about 15gb on it and I do something else while it is backing up.
I also use AndFTP a lot between a unix server that has a NAS on it as well and commonly move files to and from using SFTP. Works on the KF and every other droid device I have.
Wait, does the /sdcard partition get wiped when you do a factory reset? I'd be surprised if it does...
TiBackup only deals with apps. So that 2G should be more than enough space. Later you're talking about backing up the contents of /sdcard which is another thing entirely. Simple desktop copy when attached to your computer will be good enough for that. A nicer way would be to use any of the tons of sync-a-folder programs out there and use it instead of the desktop copy. That way after the first time I'd assume it would be garter since it's only changed files and deletions that must be processed.
Sent from my HTC Flyer P512 using Tapatalk
Copying over the back-up contents every now and again seems like your best bet if 2gb on Dropbox can't handle your TB backups. Especially since you'd be dedicating over a quarter of your Kindle's disk space to back-ups.
Thanks everyone.
In my case I basically don't want to have to re-set and re-set up my mom's fire if she does something.
Most media (except photos, because Amazon doesn't sync photos for some reason) is in the cloud, so I don't have to worry about that.
I don't know if TB will back up all the settings, inc. things I've altered, like the changing wallpaper fix. I hope so, but if not I'll still have to re-do that.
If her storage fills up I guess I can delete the back up file on her Fire and just keep it on her computer.
more memory + more ?
I have downloaded Titanium Backup to my KF, but im not sure how im supposed to use the app. I downloaded it because I want to have more memory space. I planned to load my kf with music and movies from my computer and I'm sure it will take up most of my space. Im was wondering what kind of steps am i supposed to take to to after I have downloaded the titanium backup to my KF to make this happen...I would also like to know is there a way to get swype on my kf...if you can point me in that direction too...i am rooted with burritoroot3...I also want to know what is the main purpose Go launch ex?
Thanks for your help
teookie said:
Wait, does the /sdcard partition get wiped when you do a factory reset? I'd be surprised if it does...
Click to expand...
Click to collapse
I'm pretty sure factory reset does not wipe the /sdcard folder. I do a factory reset when I load a new ROM and all my books/backups are still there.
leebo said:
I plan on editing those files to prevent the wallpaper from changing back to the default.
Click to expand...
Click to collapse
I realize this post is a little outdated, but I need to get to my 10th post so I can reply in the Dev forums Leebo, you can use the Kindle Fire Utility (latest version is 0.9.3) to lock the wallpaper in place after you change it (must be rooted and have a non-stock launcher). Kind of a pain to have to do if you change wallpapers a lot, but I think it's the best you can do without flashing a custom ROM. I just flashed CM7 last night and I can pick and choose whatever wallpaper I want and it sticks, even on the lockscreen.
Since that post I discovered (well, read here on xda) that after editing that file, most or all wallpapers of the same type will stay. I put a moving wallpaper on my moms Fire a couple of months ago and it's still there.
How is that CM7 working? Does everything work?
I haven't played with any version of CM because, as I understand, I would loose 4G on my EVO. So I'm wondering if you loose any functionality with the KF.
This might sound like a stupid question lol but I deleted play services and have no idea how to get it back can someone please help for anyone wondering yes I'm rooted.
xRhode said:
This might sound like a stupid question lol but I deleted play services and have no idea how to get it back can someone please help for anyone wondering yes I'm rooted.
Click to expand...
Click to collapse
Settings > security > allow app installation from unknown sources. Go to this website and download the .apk file to your tablet. Open and run the file
thisisapoorusernamechoice said:
Settings > security > allow app installation from unknown sources. Go to this website and download the .apk file to your tablet. Open and run the file
Click to expand...
Click to collapse
I have the exact same problem as OP, on the exact same model, and I had already tried that site, but I can't figure out how to know which variant I need? Also, I will probably need tips on HOW to install it properly (I'm rooted, if that matters, but am still at a fairly basic knowledge level and try to touch as little as possible). TIA
Still really needing help/guidance on the specifics here... poor kid's tablet has been useless for months and I'm terrified to do something wrong again.
i dont think that when u download .apk variant means much..... if you install as .zip then yes but nit as .apk i guess.... i mean you cant brick or anything when you install regular .apk
Okay, spent HOURS on this thing, and still can't get it installed... whether I download/install from chrome on the tablet, or download/sideload on the pc, or download from MoboMarket on the tablet, or from the app on the PC, every time the installation fails because apparently I'm "out of space", even though I have deleted EVERYTHING possible (safe) from the system memory and have over 2.5gb free, and the apk is around 45mb... really wishing I could afford to just buy the poor kid an iPad, so the amount of space we have is almost actual, and I wouldn't have to spend hours upon hours rooting, mounting folders, moving apps to SD card, every single time, and STILL always having no space to install due to internal memory, while the SD card has loads of nearly useless space. He just wants to play games, lol!!! (sorry for the ramble, just seriously frustrated, more than I've ever been with our iphones/pods, and I still have the fun of figuring out how to do all of this on my other kid's Neutab... not feeling the Android love, since it made external storage useless for apps).
I've spent the past 3 weeks pretty solid working out how I want to transform the 3 Fire's I got for $35 for my boys, 10, 8, and 4. I figure I'd post where I've finally landed along with some other things I've tried both with success and failure, and hopefully save some people some effort. I'd suggest reading through this before you use it as a stepbystep guide to make sure this works for you. I apologize if it's a bit jumbled, but everything should be here for you to convert your Fire. Again, I'd suggest reading through the whole thing to come up with a plan of action for you.
Goal: Turn this Fire into a glorified gameboy, used ONLY by kids, not shared with parent(s) and child
On 5.1.1
Assuming you've purchased an SD card, you will want to repartition in preparation for moving files and content.
Pointers for this:
Make two partitions, 1 which is about 70% of the card formatted as Fat32, must be a PRIMARY partition.
Second partition will be the remaining space, make it ext2, must be a PRIMARY partition. (From what I can tell the reason people suggest using ext2, and not 3 or 4, is because with 3 and 4 there is some built in backup and recovery operations which is great for when you're running a full Linux operating system, but for our purposes all it does is cause more writes which in THEORY will shorten the life of your SD card)
I formatted the Fat32 partition as the first partition, and the EXT partition as the 2nd. Not sure if the order matters or not, but I've had no problems doing it this way thus far.
Reference: http://rootmyandroid.org/increase-internal-memory-phone.html/
Reference: http://rootmyandroid.org/how-to-use-link2sd-tutorial-guide.html/
Note:
During initial setup, don't bother with multiple user profiles (reasons explained later).
Using root junky's super tool (Thanks root junky, you made this all possible!!! http://rootjunkysdl.com/?device=Amazon Fire 5th gen&folder=SuperTool) do the following:
Root
Prevent OTA
Install Google Play
Install NovaLauncher (this is important if you're not going to use the built in Kids Mode in FireOS)
In Google Play Store download the following:
Link2SD (This is assuming you've purchased an SD card)
Kids Place - The VERY SIMPLE reason I went with using this app (which essentially becomes an alternative launcher) instead of using the built in FireOS's profiles and kids mode, is because the built in kids mode will ONLY allow you to use apps which you've downloaded FROM the AMAZON app store. I understand why they do it this way, I mean, the whole point of the fire is to keep you inside the Amazon ecosystem after all. But, I have MANY games I've paid full price for on Google Play that are appropriate for my kids. Since I can't put them into the kids profile built into the FireOS (If anyone can link me to a guide which is different, I'd love to hear about it) I couldn't use the built in stuff. In addition, the built in kids mode really is a pretty awesome feature on the fire, but the icons are freaking huge and kind of a waste of space.... going with this alternative method of Kids Place gives you smaller icons therefore you can "shove" more icons on a single view. Icons which take up half the screen are great, but if you're a dad like me who's going a little overboard and putting 100+ games on these things, it'll be a bit of a pain to scroll through them for your kids using the built in profile in the OS.
Note:
You can get Link2SD from the Amazon app store, but the version there is older than what's in Google Play and ultimately didn't work. Once I got the Google Play version, worked like a champ. NOTEx2: For whatever reason (this was frustrating for me to figure out), even though I partitioned 70% of the 64GB Samsung microSD to Fat32, and the other 30% I partitioned to ext2 (BTW I did the Fat32 first and ext2 second... not really sure if it matters the order or not but that's what worked first time for me so I went with it), when I launched Link2SD and it asked me which partition to use, I had to choose ext4 for it to finally work. Choosing both ext2 and Fat32 would both result in basically it saying: "yeah, you chose the wrong one punk" (or whatever it says).
Kids Place - similar to the one above, there is weirdness in the version on Amazon vs Google Play. On Amazon it actually claims the version there is slightly newer than Google Play, but when I'd launch apps on the one I got from Amazon it would kill the WiFi for that app. I realize that this is a built in option into Kids Place, being able to choose WiFi on or off per app (which is really cool), but the one from Amazon seemed to do it when and how it wanted instead of what I was telling it to do. Google Play's version had no such problems.
(( A word of caution using Link2SD's "feature" of being able to "Link Internal Data". DON'T DO IT. I've not been burned HARD CORE by it. The symptom is that if you POWER DOWN, and POWER ON the tablet, Apps go missing. Through reading and troubleshooting, it appears via this forum (http://androidforums.com/threads/link2sd-missing-apps-after-reboot.858565/) that the culprit is when you choose the Link2SD option to "Link Internal Data" to the SD Card. There's even a nifty batch way to enable it on ALL apps. Well, after powering off and powering back on the tablet (after I was COMPLETELY done putting on 150 games), when it came back up I only had like 15 apps on it. Everything else was POOF, gone. I've noticed sometimes after a power cycle like that the apps might take a few moments to 'come alive', but even after 15 minutes of waiting I had nada. Went in search and found I'm not the only one. I've now since completely redone (including reformatting the SD Card) all 3 Fire's and so far after multiple reboots, I've not lost a single app. So for now at least, this does seem to be the problem ))
You will need to spend the $2.35 on Link2SD Plus (striking out due to my caution above, that being said I'm glad I threw this guy $2.35 because my tablet would basically be worthless without the app), and after you install Kids Place, you'll need to upgrade to premium for $4.99. Here's why:
Link2SD - Plus - This is what allows you to automatically move files and content to the SD card when an app is installed. This is mega important to me because that piddly 5.x GB of usable space gets eaten up ridiculously fast otherwise. Dive into the settings once you have plus, and just go turn everything on. Auto move everything. Be sure to go into all menus and sub menus.
Kids Place - The premium features is key for me. For example: A) You can make this app launch upon reboot, thus it basically "forces" this into a kid only/friendly device. If your kids are sneaky, or bored, they'll try to break out of Kids Place. Then they'll delete apps, make folders, sabotage they're brothers devices, etc. B) You can change the name that's displayed on top from "Kids Place", to something else like their name, give them a fun nickname, whatever. For my 10 year old he won't feel like it's just a little kid thing. C) You can do this part without premium, but it's critical for me to mention it: You can change what the home "button" does so that it directs you back to Kids Place instead of the regular home launcher. The reason you need to install NovaLauncher above is because if you still have the stock firelauncher, you can NOT replace the home button with another launcher otherwise. [Word of caution, if you enable the 'background' premium feature, Kids Place is still running, just more in the background. Took me a few minutes to figure out that's what I had done. I kept thing something was wrong and wondering when whenever I launched Kids Place it kept asking me if I want to shut it down or go into settings.... it's because it was running the whole time already)
Once you've done all that, simply download apps (Amazon Underground still seems too good to be true, but I'm hopeful), sideload apps, get apps from Google Play, then go into the Kids Place settings and choose which apps you want (Manage Apps).
Other things worth noting:
SlimRom. So, this is cool. It's fast, and pretty awesome. For me however, at the end of the day, it didn't make sense to introduce something in addition that could go wrong. If you're like me and you have no intention of using this device yourself and you ONLY want this to be a device for your kids, I don't think SlimRom is worth putting in. If it's a shared device, it might be worth it. The only thing I really forgot to test when I had put SlimRom on one of the devices was how the Amazon App store would work, and whether or not the device would be recognized properly with the Amazon Underground portion.
That's it, I hope you find this helpful. I welcome any feedback or suggestions on how to make this a more gooder guide for anyone like myself who's first jump into amazon tablets has been these fires. They truly are AMAZING devices for the price.
hobojester said:
The only thing I really forgot to test when I had put SlimRom on one of the devices was how the Amazon App store would work, and whether or not the device would be recognized properly with the Amazon Underground portion.
Click to expand...
Click to collapse
Seems pretty comprehensive guide for those using it the same way, very nice work
And when I had Slim on it worked fine with my amazon app store and underground apps. And the music and video ones for that matter. I couldn't get the kindle app to show my books but someone solved that by using older apk after I went back to stock.
@hobojester, THANKS so much for posting.
I purchased the $35 Fire Tablet for my 3 girls (9, 7, 5).
I've rooted at 5.0.1 and disabled OTA, disabled ads, Installed GooglePlay store, and loaded Nova launcher. Although I haven't taken it another few steps with Kids Place, I feel that I'll start with just locking down and hiding the apps via Nova Launcher will be enough for now. My kids are pretty savvy at navigating interfaces and even when they touch/exit an app, they know how to get back to it. I know there are holes with settings and NovaLauncher settings so when they figure them out, they can reenable certain functionality.
I'll look into Kids Place though, that might be my next step.
Also, about the whole SD card partitioning, I've installed a 32GB card and the tablet stated that it would start using the card as the default storage device. I'm guessing your method moves EVERYTHING to the card, and the default behavior for the Fire Tablet is to install some things on internal memory and 'other' storage is routed to the card? I've installed quite a bit of applications since I plugged in my SD card and it doesn't seem to be full... although I didn't check the storage stats before I wrapped the tablets.
Also, I've heard some good press on the Circle (with Disney) router, so I did order one for the home as yet another piece of the parenting puzzle:
[edit] sorry, didn't have sufficient permissions to post outside links. Google up: "Circle router with Disney"
Pond-life said:
Seems pretty comprehensive guide for those using it the same way, very nice work
And when I had Slim on it worked fine with my amazon app store and underground apps. And the music and video ones for that matter. I couldn't get the kindle app to show my books but someone solved that by using older apk after I went back to stock.
Click to expand...
Click to collapse
Good to know about Slim and the Amazon store. Again, if I were going to use the tablet in a 'shared' environment where I'm using it AND my kids are using it, I'd totally use Slim. It was awesome. In this particular instance where this $35 device is a glorified gameboy, Slim is just something that is an extra layer of complexity that's really not needed and *could* get in the way. I have no intention of my kids even getting on the internet with this device. Not until there's a real need, and even then, I'd probably go get the K9 browser and use that.
TheTruthKC said:
@hobojester, THANKS so much for posting.
I purchased the $35 Fire Tablet for my 3 girls (9, 7, 5).
I've rooted at 5.0.1 and disabled OTA, disabled ads, Installed GooglePlay store, and loaded Nova launcher. Although I haven't taken it another few steps with Kids Place, I feel that I'll start with just locking down and hiding the apps via Nova Launcher will be enough for now. My kids are pretty savvy at navigating interfaces and even when they touch/exit an app, they know how to get back to it. I know there are holes with settings and NovaLauncher settings so when they figure them out, they can reenable certain functionality.
I'll look into Kids Place though, that might be my next step.
Also, about the whole SD card partitioning, I've installed a 32GB card and the tablet stated that it would start using the card as the default storage device. I'm guessing your method moves EVERYTHING to the card, and the default behavior for the Fire Tablet is to install some things on internal memory and 'other' storage is routed to the card? I've installed quite a bit of applications since I plugged in my SD card and it doesn't seem to be full... although I didn't check the storage stats before I wrapped the tablets.
Also, I've heard some good press on the Circle (with Disney) router, so I did order one for the home as yet another piece of the parenting puzzle:
[edit] sorry, didn't have sufficient permissions to post outside links. Google up: "Circle router with Disney"
Click to expand...
Click to collapse
Glad you can find this useful.
As far as the storage card piece, you are correct in that "my" method moves EVERYTHING. Some apps are "self contained" as I like to think of it, when you download it. Popular games like Geometry Dash have everything contained in the downloaded app (or the .APK file). That is just the app itself. You can tell the OS to auto put the "app" on the storage card, and that works out great, but it's a little misleading. The problem comes in when you have games like Knights of the Old Republic. That app itself is something like 40 MB or what not, but after you launch the app, it'll download this extra content, which in this particular case is 2 GB. The kicker: it'll ONLY store that "content" (as I call it) into what the device considers "External Storage", which is ACTUALLY on the INTERNAL storage. That whole emulated SDcard business Android does. It's all funky. For fear of sounding like a commercial, Link2SD fixes all of that. Linux (what Android is built off of (oh, and hi iPhone users, so is iOS for the record)) has this thing called "Symbolic Links". You can google it up more about it, but think of it as an uber shortcut. You create a symbolic link on internal storage to the actual physical SD card, and the program THINKS it's writing to internal storage when in fact it's writing to the SD card. The kicker: you can only create symbolic links if you're rooted. The nice thing about Link2SD, is that it'll symbolic link EVERYTHING. The "app", the "content", and all of the saved game data and what not (which take a game like MineCraft, can get pretty big if your kids (like mine) go crazy building worlds). And you can have it to it all automagically. But you will need to pop that SDCard out, put it in your computer, and get it re-partitioned (visit the links I posted in the original guide for more in depth details).
I have heard really cool things about the Disney router. For now, my kids don't really have any need (or business) getting on the internet unsupervised. When they do, I'll probably give them the K9 browser.
Sorry for the questions but I can't figure it out, searching doesn't find it, and I'm trying to get these wrapped.
Do I need to still select Fire OS" install supported apps to sd". Or do I do it all with LInk2DS? I haven't Rom'd these yet and I probably won't until we get back from vacation. They are only rooted with stock rom. I also don't need to do the whole kids place thing as my kids are a little older...Thanks for taking the time to write this all up!
Also I have partitions shown in my Disk usage app that are named "External", "SDcard1", system and "SD Card". I know "SD Card" is the exfat 2 part I made base on the size, but as for the "external" and SDcard1, they are both roughly 5 gb ( my sd was only 8 gigs so I made the FAT 32 5 gigs and the rest the exfat 2. But now I am not sure of the naming and I can't tell based only on size. So, is "External" really the built in amazon storage, and "sdcard1" is my microsd?
Like your thinking.
How are you getting past the "Apps with usage access" request for Kids Place?
howzitnow said:
Sorry for the questions but I can't figure it out, searching doesn't find it, and I'm trying to get these wrapped.
Do I need to still select Fire OS" install supported apps to sd". Or do I do it all with LInk2DS? I haven't Rom'd these yet and I probably won't until we get back from vacation. They are only rooted with stock rom. I also don't need to do the whole kids place thing as my kids are a little older...Thanks for taking the time to write this all up!
Also I have partitions shown in my Disk usage app that are named "External", "SDcard1", system and "SD Card". I know "SD Card" is the exfat 2 part I made base on the size, but as for the "external" and SDcard1, they are both roughly 5 gb ( my sd was only 8 gigs so I made the FAT 32 5 gigs and the rest the exfat 2. But now I am not sure of the naming and I can't tell based only on size. So, is "External" really the built in amazon storage, and "sdcard1" is my microsd?
Click to expand...
Click to collapse
This will be a good chance for me to point out (I'll edit the guide in a second): DO NOT LINK "INTERNAL" Data via Link2SD. It has caused apps to disappear and never come back. I actually had to start completely over on all there of my devices. That "option" to Link the Internal Data is only available when you purchase the Plus version of Link2SD, DON'T CHOOSE THAT OPTION!!!
Now, with that out of the way, Link2SD is clever in how it works, and I am barely out of the n00b stage on this so I'll give a disclaimer that I may be totally feeding you false information here, but here's how I understand it: First of all, what I did was leave the SD card settings inside the OS all 'defaults', which installs the "App" to the SD Card. Now with that, I believe what happens is Link2SD intercepts that 'transfer' and puts the actual apps on the EXT partition. There is the incredibly critical option in Link2SD to put all other data (except "internal" data of course) on the SD Card. That's what moves the really big parts of those big games and apps. So when the App is relocated, it's put onto that EXT part and the Content on your FAT32 part. To address your question regarding External, SDCard#, and 'where in the heck is the EXT' part.... the EXT partition is mounted and 'located' under the 'local' storage under something like the /data/sdex2 folder. Welcome to the world of Linux... on a computer Linux (if my really old dusty Linux knowledge still works) when you need to access the CD drive you have to MOUNT it, and than LINK that mount to basically a local folder (something like /MNT/CDROM). Your EXT partition is mounted the same way as a folder, and for whatever reason in an app like ES File Explorer you won't see it as another drive, you'll only see the FAT32 drive. Maybe that has something to do with it being FAT32, I'm not sure. ...... the long point here is that Link2SD intercepts or coordinates with the OS's moving of apps to locate the App data to your EXT partition (mounted to that /data/xxxxx folder) and all the other really big stuff to the FAT32 partition. Again, I may be way off here, but hey, makes sense in my brain right now .
Inside of Link2SD there's an option in the menu to see the storage consumption, and THERE it'll actually show you the EXT partition as well as the FAT32 partition.
If my kids were a little older and I truly didn't care about them mucking around in settings, potentially deleting things etc., I'd probably give SlimRom a go for that. I've been messing around with it some more and it is just simply more 'pure' Android OS so it'd give the more 'true' Android experience.... if you really care .
cogito808 said:
Like your thinking.
How are you getting past the "Apps with usage access" request for Kids Place?
Click to expand...
Click to collapse
I'm not, simply because FireOS doesn't have that option. I just have to hit 'Cancel' and move on. If you were to put on SlimRom you'd have that option. From what I can tell the biggest thing we're missing out on by staying on FireOS and not having this option would be limiting time in Kids Place for certain apps and what not. For me personally, I'll just set a timer, but if it's something you want to use, I'd absolutely suggest putting SlimRom on there and then basically following the rest of the guide. Everything still applies.
If anyone cares, I set up SlimLP for my mom who is a bit less technologically advanced than I am and I put smart launcher on the device and just hid the apps I thought would be bad if she were to accidentally open them and not know what she was doing. (I thought his could be useful for some of the people here as well)
How do I avoid using the "Link Internal Data" feature? I do not see this option anywhere in the App.
Edit: OK. found it. I was looking in settings (before moving anything) but once I move an app the options come up.
chemie99 said:
How do I avoid using the "Link Internal Data" feature? I do not see this option anywhere in the App.
Edit: OK. found it. I was looking in settings (before moving anything) but once I move an app the options come up.
Click to expand...
Click to collapse
Yeah, I found out the hard way how bad this can be.... like... 6pm on the 24th, type of thing, RIGHT when I had finished it all up. I had some kind of heavenly help nudge me into thinking "you should turn these off completely, and simulate Christmas morning, see how long it'll take to fully boot back up".... and you can imagine my stomach drop when I went from having 150 games down to something like 3... it was painful. So, yeah, avoid that setting AT ALL COSTS!
How do you partition the SD card on the tablet? Also is this worth doing when you can install xposed SD card modules and be able to move obb files
Sent from my KFFOWI using Tapatalk
just wondering on the reason for 70/30 FAT32/EXT2. What gets installed in each partition?
tonyt3rry said:
How do you partition the SD card on the tablet? Also is this worth doing when you can install xposed SD card modules and be able to move obb files
Sent from my KFFOWI using Tapatalk
Click to expand...
Click to collapse
I"m not familiar with the xposed SD card modules so I can't help there. As far as HOW you do it, I linked to some articles in the first post that might help (Reference: http://rootmyandroid.org/increase-in...ry-phone.html/
Reference: http://rootmyandroid.org/how-to-use-...al-guide.html/)
chemie99 said:
just wondering on the reason for 70/30 FAT32/EXT2. What gets installed in each partition?
Click to expand...
Click to collapse
Basically the "app" gets installed to the 30% EXT2, and allt he "content" goes tot he 70% FAST32. Content will typically be data that gets downloaded after the app is installed. Take Knights Of The Old Republic for example, the "app" is like 50MB, but the "content" which gets downloaded upon the first time launching the actual program, is 2GB.
An Alternative Solution
I also gave my kids 3 Fire tablets for Christmas. My kids are mostly older (12,11,4) and the older two have had other Android devices. I went a different direction from the OP, which I'll discuss here for posterity's sake. This is a bit harder than the OP's method but ends up with a more conventional Android environment.
As background, I used FireOS on the Fire Phone for a few weeks, and ran into many problems. I installed CM11 on the Fire Phone and bought another in the final sale. You can read about that on the Fire Phone forum if you're interested.
Also, I've used Screen Time Parental Control for a couple years now, and while somewhat expensive it's great for monitoring without being too invasive. I can let the kids have a lot of freedom with their devices, without having to be worried about them either being on them all the time, or doing weird things. Screen Time nominally works with FireOS but in the end I did not use the tablets as-is long enough to try installing it.
For these tablets, I decided the easiest path was to install CM12. This avoided waiting for Amazon for security updates, and any FireOS incompatibilities, as I'd experienced with the Fire Phone. Also, the kids are familiar with CM, and frankly any replacement Android device will be easier in the future. After my experience with the zombie Fire Phone from Amazon I'm less concerned about CM/ggow/XDA bugs than I am Amazon's.
I decided to create separate user accounts for each child, as opposed to having both my Google account and the child's Google account** under a single user. I've done this before, but it's awkward to have to switch between accounts when using Gmail/Hangouts/Drive/etc., and sometimes things get mixed up.
Thus, for each of the three tablets I went through this process:
[I don't have the tablets in front of me, so if one of these steps doesn't seem obvious ask and I'll look up the exact names/buttons.]
1) Install CM12 using the well-documented methods
2) Boot into CM
3) Configure for my primary Google account
- Download interesting applications that have been purchased on my account
- Open SuperSU, enable multi-user access
- Open Contacts, select "ME", change name to "Dad" (or whatever)*
- Open File Manager
- Settings / Enable multi user access
- Open main Settings app:
- Set screen lock / PIN
- Users / Add user / OK / Set up now
4) "Switching to new user"
- Google Launcher always
- Log in with the "child's" account** in the wizard
- Open Contacts, change "ME" to the child's name
- Open File Manager
- Settings / Switch to Root access mode
- Browse to /data/app/
- Change into interesting packages and pick the .apk file
- Select "Install"***
- Repeat as necessary
Here I installed Screen Time Parental Control from the Play Store and went through the steps for Child device. Also any customization for the account should go here, then you can switch back to your regular user.
To switch user, drag down the system tray, pick the head image in the top right corner, and then the appropriate name.
Notes:
* This is in a wacky place, but this contact is how CM identifies the user name to display in the switch screen. If you don't see "ME" don't add it, just browse around; it's there somewhere.
** Apparently Google only allows accounts for people >=13. Thus, if you are reading from Google, know that these are my own accounts and my children happen to use them.
*** This will actually not re-download the application, but it makes a temporary copy while installing. Application user data is always separate between users, but for the most part download data is shared. For most applications things work on either user; however, Electronic Arts applications don't work with separate users, and Terraria will print an error (but still worked once the core data was downloaded with my purchasing account). I'm sure there are other apps that roll their own security and will be in this situation, but out of a very large family library these are the only apps with which I've had trouble.
Finally, a last note that Screen Time does not presently block creating new users from the system tray. In theory a youngling could create a user that would not have Screen Time limits, but then they wouldn't be able to delete it without getting in to Settings, which you should block anyway. Depends how devious your children are; for me I'm just waiting until they figure it out to do anything about it... just keep an eye on it if you go this route.
Hopefully this helps someone, eventually!
Best,
Tim
I got two fire tablets for the kids for Xmas, one is the kids edition (with the 1yr of apps,etc) the other is a standard fire. Used root junkies tool on both to block lock screen ads and OTA and hide Apps. They were both running OK, occasionally have the odd situation where you try to open an app and it looks like it is reloading it or redownloading it, not sure if this is because internal space has ran out and its redownloading on the fly but its quite frustrating.
Decided to flash slim LP rom on the standard tablet as there were apps that weren't available(better choice on play store and it wasn't tied into the 1year subscription).
So glad I did, was pretty straight forward to get it up and running and the latest build is so solid, fast and stable, was expecting it to be a bit quicker than fire OS as it had a lot less bloat but it seriously impressed me. So I have kids place set up on it to control apps and play time. I also installed hilocker from the play store to help simplify/lock down the lock screen. For example you can disable the status bar in kids place,but the child is still able to turn the screen off and on, they can then access the pull down toggles and mess with things, but with hilocker you can disable it which is great. Battery life is just as great if not better and your also up to date with all Google's security patches to boot.
It is a very good value tablet, as its just been reduced to just £40 in the UK. One thing that would be a major improvement is I just wished they had put 16GB of storage instead of 8GB. I know it has the sd card option which is great but in reality you only get around 5GB of actual internal storage for apps, a lot of which can't be moved to the sd card or still take up internal space when they are. Again I can't recommend slim rom enough as it really makes a big difference to the tablet (besides providing full play store access) and makes it perfect for consuming media, browsing, or just handier for when you want to use a bigger screen than your phone.
Sent from my InFocus M810t using Tapatalk
gsmyth said:
One thing that would be a major improvement is I just wished they had put 16GB of storage instead of 8GB. I know it has the sd card option which is great but in reality you only get around 5GB of actual internal storage for apps, a lot of which can't be moved to the sd card or still take up internal space when they are.
Click to expand...
Click to collapse
@gsmyth, look into Link2SD if you haven't already. Between that and a 32GB MicroSD I don't feel especially constrained by the 8GB onboard.
tdcrone said:
@gsmyth, look into Link2SD if you haven't already. Between that and a 32GB MicroSD I don't feel especially constrained by the 8GB onboard.
Click to expand...
Click to collapse
How are you formatting your 2nd partition for links2sd?. I keep getting 'unable to mount' error, trying to setup as ext4, which I thought was the standard on newer hardware. I believe I tried ext 2 as well. Without 2nd partition obb and data stay on internal. Thanks
I wish to thank the OP for this, as I am trying to use, and bought the recommended apps... haven;t had the time to set this all up, and it gets a little confusing having all these other devices, but eventually I'll get it.