I have an external mic hooked up to an 8227L head unit. Is there any way to switch the bluetooth so it uses the external mic?
Model: YT9213AJ(full_8227L_demo)
Manufacturer: ALPS
Build Number: YT9213AJ_00011_V001
Build Fingerprint: alps/full_8227L_demo/8227L_demo:9.1/O011019/1594284080:user/test-keys
OS: O MR1 (9.1)
CPU Arch. : ArMv7 Processor rev3 (v7i)
Chipset AC8227L
Cores 4
Instruction Sets: armeabi-v7a,armeabi
CPU features half thumb fast mult vfp edsp thumbee neon vfpv3 tis vfpv4 idiva idivt vfpde32 ipae evtstrm
Kernal version: 3.19.79
touchstone2 said:
Külső mikrofonom van csatlakoztatva egy 8227L-es fejegységhez. Van-e mód arra, hogy a bluetooth-ot úgy kapcsolja, hogy az a külső mikrofont használja?
Típus: YT9213AJ (full_8227L_demo)
Gyártó: ALPS
Gyártási szám: YT9213AJ_00011_V001
Build ujjlenyomat: alps / full_8227L_demo / 8227L_demo: 9.1 / O011019 / 1594284080: felhasználó / tesztkulcsok
Operációs rendszer: O MR1 (9.1)
CPU Arch. : ArMv7 processzor rev3 (v7i)
Lapkakészlet AC8227L
4. magok
Utasításkészletek: armeabi-v7a, armeabi
A CPU fél hüvelykujjával gyors mult vfp edsp thumbee neon vfpv3 tis vfpv4 idiva idivt vfpde32 ipae evtstrm
Kernal verzió: 3.19.79
Click to expand...
Click to collapse
Szia!
Mi lett a megoldás?
Nekem is csak a belső mikrofont használja, és nem találom a kapcsolót a külső mikrofon bekapcsolásához
Related
Hi,
Please can someone direct me to where I can get roms to use on my android device.
I have the following head unit:
HMI: XPH.010.2016.8.24.9.12
MCU: TS901.160414
MEDIA: v1.0.0_2016.8.16.11.2
BTV: BT.15.12.01.1040(CD:93:E6:01:CF82)
DVDROM: Nand.152101_1200XH.020017
Manufacturer: ATC
Baseband Version: Not Available
RIL Version: android reference-ril 1.0
Build Number: generic_ac8317-userdebug 4.2.2 JDQ39E
eng.root.20160815.143543 test-keys
Build Fingerprint: Android/generic_ac8317/ac8317:4.2.2/JDQ39E/eng.root.2016
0815.143543:userdebug/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Jelly Bean MR1 (4.2.2)
SDK: 17
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: unknown
Chipset: Autochips ac83xx
Cores: 4
Clock Speed: 166 MHz - 1001 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: userspace
Kernel Version: 3.4.35
Kernel Architecture: armv7l
Waiting for....
[email protected] said:
Waiting for....
Click to expand...
Click to collapse
What results or information did you get from searching forums?
Based on MCU prefix, appears there is some information but may not be any custom ROMs.
marchnz said:
What results or information did you get from searching forums?
Click to expand...
Click to collapse
I search many times, but not found.
I just found on 4pda.ru but he not attach the rom.
Reed.
Bought this off bay market with fake 8.1 but it's really a kitkat. Can't find info anywhere maybe due to it's age. Hoping someone here has similar one before upgrading.
Device info:
Labels on MB: ZH5005MAIN-MIPI-PCB
l2017-12-29 V01
K3_20180627
K3_V2.0-01C3
SMT_D_B_M_Q_
Chips label:
MUC: EW3036AC
MT6627N
GM71508C
MT6323GA
MT6166V
MT6682V
Device info from app:
Model: K6_01_IH (yk858_emmc_wcdma)
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V10, 2014/05/13 18:15
RIL Version: Not Available
Build Number: ALPS.KK1.MP1.V2.11
Build Fingerprint: alps/yk858_emmc_wcdma/yk858_emmc_wcdma:4.4.2/KOT49H/1533356118:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Kitkat (8.1)
SDK: 19
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: yk858_emmc_wcdma
Chipset: MT6582
Cores: 4
Clock Speed: 598 MHz - 1300 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: hotplug
Kernel Version: 3.4.67
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-400 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
I have a similar unit to yours. The "brand name" is YODY and i cant find any info on it. Its running fake 6.0. I found it has root but only in terminal emulator. I dont know a whole lot about mediatek units but they seem very different compared to other android phones i've messed around with so i've been reading up on them before i try to do anything to it. I would like to get full root and install viper and boost the mic gain. An upgrade to 8.1 would be great but i cant find firmware. I think whatever we do we will have to do it all on our own. Anyways here are some of my specs:
Model
K6_02_GH
System K6_02_GH_V2.0.1_20181128
Kernel
3.4.67
MCU
CM_0.7786.0_180307_15:14
App
MT1002_V1.0.9
SoC
MT6582
Board
yk858_emmc_wcdma
BuildID
ALPS.KK1.MP1.V2.11
eng.liuyang.1543395062
Firmware options
Do a search for the Ezonetronics RM-CT0011. There are 2 or 3 versions of firmware on a russian site. I've tried them, they're nothing spectacular with no real improvements on the known bugs. I'm currently using a version dated 2018-05-05
Good morning everybody,
I bought a Android head unit for my Duster in February 2018. and since few monthes it dosen't work properly.
So i asked myself if a update was avalable? (i will do in same time as a clean-up) .
Also, maybe someone know how to modify the starting process to become more faster?
More informations from Droid-Info August 2019 :
DISPOSITIF
Modèle: t3 (t3_p3)
Fabricant: Allwinner
Version de bande de base: E261
Version de RIL: sw-dataonly-ril-for-7.0_v1.0
Numéro de build: t3_p3-eng 7.1.1 NMF27D 20171125 test-keys
Définir l'empreinte digitale: Allwinner/t3_p3/t3-p3:7.1.1/NMF27D/20171125:eng/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
Version OS: N MR1 (7.1.1)
SDK: 25
AFFICHAGE
Résolution: 1024x600 pixels
Densité de Logiciel: 160 dpi (mdpi)
Fréquence de rafraîchissement: 60 Hz
PROCESSEUR
Architecture du CPU: ARMv7-A
Board: exdroid
Chipset: sun8iw11p1
Coeurs: 4
Vitesse d'horloge: 480 MHz - 1200 MHz
Sets d'instructions: armeabi-v7a, armeabi
Caractéristiques du CPU: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32
Gouverneur du CPU: Non disponible
Version du noyau: 3.10.65
Architecture du noyau: armv7l
GRAPHIQUE
Rendeur: Mali-400 MP
Vendeur: ARM
Version OpenGL: OpenGL ES 2.0
RAM
Total: 2048 MB
Monceau Java: 192 MB
STOCKAGE
Interne: 11,9 GB
Externe: 14,6 GB
CARACTÉRISTIQUES
Bluetooth: Oui
Bluetooth LE: Oui
GPS: Oui
NFC: Non
USB Accessoire: Oui
WiFi: Oui
WiFi Direct: Oui
BATTERIE
Technologie:
Santé: Bien
CAPTEURS
Temperature sensor
I will be thanking you for any help.
Regards, Jimmy (a guy in need).
Hi guys, need help with a unit I have got.
Says it an android 10 but I don’t trust it as it come up with android 6 when installing apps from the play store.
Need help identifying what the actual unit is and what android firmware I can run on it.
how to root the device and fix a problem with the sd card not being able to be reformatted from photos etc to internal storage(don’t have the 3 dots to format)
Hmi:ZYHC.D.Q.3.05.11.16.08.30
Mcu: ts907.190518(H)
Media: hc_v2.0.0_190923_1100e(v1.40)
Btv: BT.19.11.12.1200
Many thanks
Edit:
Managed to pull this from droid info:
DROID INFO REPORT
DEVICE
Model: FF-5000 (FF-5000)
Manufacturer: alps
Baseband Version: Not Available
RIL Version: Not Available
Build Number: FF_8227L_10
Build Fingerprint: alps/full_8227L_demo/8227L_demo:8.1.0/O11019/1571038753:userdebug/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O MR1 (10)
SDK: 27
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: unknown
Chipset: AC8227L
Cores: 4
Clock Speed: 598 MHz - 1118 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU Governor: interactive
Kernel Version: 3.18.79
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-450 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
RAM
Total: 1950 MB
Java Heap: 192 MB
STORAGE
Internal: 12 GB
External: 58 GB
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology:
Health: Good
SENSORS
Not Available
hi all
I have this device PX5 RK3368 Brick i need recovery FIX
the details
DEVICE
Model: px5 (px5)
Manufacturer: rockchip
Baseband Version: Not Available
RIL Version: RIL_RK_DATA_V8.0
Build Number: px5-userdebug 8.0.0 OPR5.170623.007 eng.allen.20180504.123345 test-keys
Build Fingerprint: Android/px5/px5:8.0.0/OPR5.170623.007/allen05041233:userdebug/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O (8.0.0)
SDK: 26
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv8-A
Board: rk30sdk
Chipset: RK30BOARD
Cores: 8
Clock Speed: 216 MHz - 1512 MHz
Instruction Sets: arm64-v8a
CPU Features: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU Governor: interactive
Kernel Version: 4.4.103
Kernel Architecture: aarch64
GRAPHICS
Renderer: PowerVR Rogue G6110
Vendor: Imagination Technologies
OpenGL Version: OpenGL ES 3.1
RAM
Total: 3891 MB
Java Heap: 192 MB
STORAGE
Internal: 25.3 GB
External: 495.9 MB
It it an MTCD/E device?
marchnz said:
It it an MTCD/E device?
Click to expand...
Click to collapse
i dont know but i buy from roadmaster
marchnz said:
It it an MTCD/E device?
Click to expand...
Click to collapse
is Px5 CSN2
ksa616 said:
is Px5 CSN2
Click to expand...
Click to collapse
OK, this thread if for MTCD/E devices, you will find information for CSN2 devices in the android headunit forum, try searching there first.
Also, contact the reseller for support.