I have this device PX5 RK3368 Brick i need recovery FIX - Android Head-Units

hi all
I have this device PX5 RK3368 Brick i need recovery FIX
the details
DEVICE
Model: px5 (px5)
Manufacturer: rockchip
Baseband Version: Not Available
RIL Version: RIL_RK_DATA_V8.0
Build Number: px5-userdebug 8.0.0 OPR5.170623.007 eng.allen.20180504.123345 test-keys
Build Fingerprint: Android/px5/px5:8.0.0/OPR5.170623.007/allen05041233:userdebug/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O (8.0.0)
SDK: 26
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv8-A
Board: rk30sdk
Chipset: RK30BOARD
Cores: 8
Clock Speed: 216 MHz - 1512 MHz
Instruction Sets: arm64-v8a
CPU Features: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU Governor: interactive
Kernel Version: 4.4.103
Kernel Architecture: aarch64
GRAPHICS
Renderer: PowerVR Rogue G6110
Vendor: Imagination Technologies
OpenGL Version: OpenGL ES 3.1
RAM
Total: 3891 MB
Java Heap: 192 MB
STORAGE
Internal: 25.3 GB
External: 495.9 MB

It it an MTCD/E device?

marchnz said:
It it an MTCD/E device?
Click to expand...
Click to collapse
i dont know but i buy from roadmaster

marchnz said:
It it an MTCD/E device?
Click to expand...
Click to collapse
is Px5 CSN2

ksa616 said:
is Px5 CSN2
Click to expand...
Click to collapse
OK, this thread if for MTCD/E devices, you will find information for CSN2 devices in the android headunit forum, try searching there first.
Also, contact the reseller for support.

Related

Need help to find a compatible recovery

Hi all,
I've bought a sympatic Android car autoradio on Android 4.4. I've succesfully rooted it via Kingroot, replaced by SuperSu, but I don't know where I can found a cimpatible CWM or other recovery.
Here is the specs of the tablet (via CPU-Z):
Cores: 4
Architecture: 4x ARM-Cortex A7 @ 1.60GHz
Revision: r0p3
Clock Speed: 166 MHz - 1.60 GHz
CPU 0: 1600 MHz
CPU 1: 1600 MHz
CPU 2: stopped
CPU 3: stopped
CPU Load: 5%
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
GPU Load: 0%
Scaling Governor: userspace
Model: AC8227
Manufacturer: ATC
Brand: Android
Board: Unknown
Hardware: autochipsac83xx
Screen Size: 7066,53 inches
Screen Resolution: 800x400 pixels
Screen Density: 0dpi
Toal RAM: 835MB
Available RAM: 196MB (23%)
Internal Storage: 0,29 GB
Available Storage: 0,17GB (58%)
Android Version: 4.4.4
API Level: 17
Bootloader: unknown
Build ID: JDQ39E.V3.10.02-20160711
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.35 (V3.10.02-20160711)
Root Access: Yes
System Uptime: 00:07:09
Click to expand...
Click to collapse
I need a recovery for flashing Gapps, principaly for the Play Store. simply install a Play Store apk doesn't work, install a modded version via Lucky Patcher does'nt work...
Have you any idea please?

Where can I get custom roms for my android head unit?

Hi,
Please can someone direct me to where I can get roms to use on my android device.
I have the following head unit:
HMI: XPH.010.2016.8.24.9.12
MCU: TS901.160414
MEDIA: v1.0.0_2016.8.16.11.2
BTV: BT.15.12.01.1040(CD:93:E6:01:CF82)
DVDROM: Nand.152101_1200XH.020017
Manufacturer: ATC
Baseband Version: Not Available
RIL Version: android reference-ril 1.0
Build Number: generic_ac8317-userdebug 4.2.2 JDQ39E
eng.root.20160815.143543 test-keys
Build Fingerprint: Android/generic_ac8317/ac8317:4.2.2/JDQ39E/eng.root.2016
0815.143543:userdebug/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Jelly Bean MR1 (4.2.2)
SDK: 17
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: unknown
Chipset: Autochips ac83xx
Cores: 4
Clock Speed: 166 MHz - 1001 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: userspace
Kernel Version: 3.4.35
Kernel Architecture: armv7l
Waiting for....
[email protected] said:
Waiting for....
Click to expand...
Click to collapse
What results or information did you get from searching forums?
Based on MCU prefix, appears there is some information but may not be any custom ROMs.
marchnz said:
What results or information did you get from searching forums?
Click to expand...
Click to collapse
I search many times, but not found.
I just found on 4pda.ru but he not attach the rom.
Reed.

Any ROM/UPDATES for generic HU labelled K6_01_IH (MCU chip: EW3026AC)

Bought this off bay market with fake 8.1 but it's really a kitkat. Can't find info anywhere maybe due to it's age. Hoping someone here has similar one before upgrading.
Device info:
Labels on MB: ZH5005MAIN-MIPI-PCB
l2017-12-29 V01
K3_20180627
K3_V2.0-01C3
SMT_D_B_M_Q_
Chips label:
MUC: EW3036AC
MT6627N
GM71508C
MT6323GA
MT6166V
MT6682V
Device info from app:
Model: K6_01_IH (yk858_emmc_wcdma)
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V10, 2014/05/13 18:15
RIL Version: Not Available
Build Number: ALPS.KK1.MP1.V2.11
Build Fingerprint: alps/yk858_emmc_wcdma/yk858_emmc_wcdma:4.4.2/KOT49H/1533356118:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Kitkat (8.1)
SDK: 19
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: yk858_emmc_wcdma
Chipset: MT6582
Cores: 4
Clock Speed: 598 MHz - 1300 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: hotplug
Kernel Version: 3.4.67
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-400 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
I have a similar unit to yours. The "brand name" is YODY and i cant find any info on it. Its running fake 6.0. I found it has root but only in terminal emulator. I dont know a whole lot about mediatek units but they seem very different compared to other android phones i've messed around with so i've been reading up on them before i try to do anything to it. I would like to get full root and install viper and boost the mic gain. An upgrade to 8.1 would be great but i cant find firmware. I think whatever we do we will have to do it all on our own. Anyways here are some of my specs:
Model
K6_02_GH
System K6_02_GH_V2.0.1_20181128
Kernel
3.4.67
MCU
CM_0.7786.0_180307_15:14
App
MT1002_V1.0.9
SoC
MT6582
Board
yk858_emmc_wcdma
BuildID
ALPS.KK1.MP1.V2.11
eng.liuyang.1543395062
Firmware options
Do a search for the Ezonetronics RM-CT0011. There are 2 or 3 versions of firmware on a russian site. I've tried them, they're nothing spectacular with no real improvements on the known bugs. I'm currently using a version dated 2018-05-05

What is this version??? 8227L_demo haoling_00009_V001_20191128

Is anybody know what is this version of my Firmware?
haoling_00009_V001_20191128 I have problem with my Feder-balance Icon on the Audio setting page.
Thank!
Android: haoling_00009_V001_20191128
Android os: 9.1 XY AUTO: 3.1 (8227L)
CAN Pro: 3.0 (8227L)
DDR: 2G FLASH: 32G
cpu: A7 1.3GHz X 4
display: 1024*600
MCU: 3.1 (8227L)
CORTEX ARM Cortex-A7
Cores: 4
Architecture: 4X ARM Cortex-A7 @ 1.12Ghz
Revision: r0p3
Clock speed:
CPU0: 1118MHz
CPU1: 1118MHz
CPU2: 1118MHz
CPU3: 1118MHz
CPU Load: 99%
GPU Vendor: ARM
GPU Renderer: Mali-450 MP
GPU Load: 0%
Scaling Governor: performance
DEVICE:
Model: 8227L_demo_(full_8227L_demo)
Manifacturer: alps
Board: Unknow
Hardware ac8227l
Screen Size 7.42 Inches
Screen Resolution: 1024*600
Screen Density: 159 dpl
Total RAM: 1024 MB
Avaliable RAM: 609 MB (59%)
Internal Storage: 26.58 GB
Avaliable Storage: 18.91 GB (71%)
SYSTEM:
Android Version: 8.1Go
API Level: 23
Security Patch Level: 2017-11-05
Bootloader: Unknow
Java VM: ART 2.1.0
OpenGL WS: 2.0
Kernel Architecture: armv7l
Kernel Version: 3.18.22(1574920303)
Root Access: No
Google Play Service: 20.04.14 (040300-294335909)
System Uptime: 2 days 02.03.56
i have this same firmware.No fader/balance etc.Im still waiting for ota.Maybe in future
fergeteg said:
Here is the linkhttp://www.mediafire.com/folder/sa41gjayjje91/YT9213A_Update
Click to expand...
Click to collapse
YT9213A works for me
YT9213AJ don't work...
---------- Post added at 11:28 PM ---------- Previous post was at 11:27 PM ----------
Please make a Backup of your unit.
I haven't... ?

Need help with identifying unit

Hi guys, need help with a unit I have got.
Says it an android 10 but I don’t trust it as it come up with android 6 when installing apps from the play store.
Need help identifying what the actual unit is and what android firmware I can run on it.
how to root the device and fix a problem with the sd card not being able to be reformatted from photos etc to internal storage(don’t have the 3 dots to format)
Hmi:ZYHC.D.Q.3.05.11.16.08.30
Mcu: ts907.190518(H)
Media: hc_v2.0.0_190923_1100e(v1.40)
Btv: BT.19.11.12.1200
Many thanks
Edit:
Managed to pull this from droid info:
DROID INFO REPORT
DEVICE
Model: FF-5000 (FF-5000)
Manufacturer: alps
Baseband Version: Not Available
RIL Version: Not Available
Build Number: FF_8227L_10
Build Fingerprint: alps/full_8227L_demo/8227L_demo:8.1.0/O11019/1571038753:userdebug/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O MR1 (10)
SDK: 27
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: unknown
Chipset: AC8227L
Cores: 4
Clock Speed: 598 MHz - 1118 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU Governor: interactive
Kernel Version: 3.18.79
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-450 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
RAM
Total: 1950 MB
Java Heap: 192 MB
STORAGE
Internal: 12 GB
External: 58 GB
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology:
Health: Good
SENSORS
Not Available

Categories

Resources