Related
Since I received my N7000 on November 17, 2011 from Mobilecityonline my Galaxy Note won't update. It's running UBKK2 - the CSC is TTT - which a Brazilian CSC.
I've searched every thread and correctly followed every step of the process I've found unsuccessfully, I've tried the manual update and receive "no update available" every time I read about a new firmware release. The CSC is listing only 3 codes; VNO, TTT, and TDR - I installed each one of these CSC codes in an attempt to prompt a software update to no avail. I haven't even gotten the update from January that provided the addition of the Torch & everything that came with it!
Short of rooting my Note is there anything I can do to either change the CSC Code to one that receives updates regularly or manually update the firmware? I thought I'd wait until ICS became available hoping that would correct these issues but I'm slowly getting PO'd that I may not be even to receive ICS.
Plus I didn't/don't see the reason to have rooted by now - I've rooted all of my Android devices from HTC EVO 4G's & 3D's, Nook Color, to Asus Transformers. Is there anything I can do without rooting this beast and will I even receive Ice Cream Sandwich?
I'm begging for help please. I'd sincerely appreciate ANY help and I'm willing to donate to anyone that will help achieve everything I'm missing out on to date.
Thank you in advance,
Jim G.
If keeping it stock is all you want, just download one of the stock firmwares and flash it with odin.
You may have to be a member to see this link but.....
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=6#regiona
^^^
They are the South Amercian firmwares currently out, but the European ones are newer if you want to try those.
Wow that was fast!
Wow! Thank you for the super fast reply. Can I D/L and use any stock firmware, I was hoping to use either the UK or German versions cuz they look like they get updates more often than the rest. If I'm wrong I stand corrected - could you please point out a version to use or am I stuck using the BZ version forever?
Oh Lord I hope not! * Forgive me - I saw you suggested the EU versions after I hurried to reply, my fault! *
Again, Thank You in advance,
Jim G.
Brazil Note.
I too have a Note with a ROM from Brazil. Since this is my first Android phone and I'm a noob so far, what will it take to get mine over to a euro one. Will this brick my phone? What region do you recommend for a US user? I understand that you meant Europe, but there a lot of choices like open, open euro or open germany or europ or german. Any directions or advice is greatly appreciated. Thanks.
flshing a firmware for another region is fine... I offen just update to whereever has the newest update
But if i update to a stock rom from another country without changing csc, will i be able to update via kies whenever a newer csc update gets release online for my country? I got this ideia it wont be possible and will still need to change it again via Odin. It bother me if it wipes my phone each time i update. Still in kka/5 here with unlocked phone...
Sent from my GT-N7000 using XDA
William Haven said:
But if i update to a stock rom from another country without changing csc, will i be able to update via kies whenever a newer csc update gets release online for my country? I got this ideia it wont be possible and will still need to change it again via Odin. It bother me if it wipes my phone each time i update. Still in kka/5 here with unlocked phone...
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
After updating to another regions ROM, You can just Odin back to the original stock ROM if you really wanted to, to restore KIES function for the original configuration.
But to be honest, the only time I ever have, is just for warranty purposes, I don't touch kies in any shape or form, there really is no need.
The way I work is, I like to use the stock ROMs, but rooted etc... So, when I got the phone, I rooted it, put the ClockWorkMod Recovery (CWM) on and now I just update my ROM with the repacked stock versions made to be flashed with CWM. They are exactly the same ROMs but rooted and deodexed, some I "believe" are multi CSC too.
Swyped from my finger, to your face on my Samsung Galaxy Note, using Tapatalk!
Thank you for all the help! I'm choosing to use the open-Germany (DBT) stock ROM cuz I've been keeping track of the ROM that was updated the most. I found it to be the German and UK versions but it seems the open-German edges it out.
I've got it all D/L'd and am actually waiting to get my notebook up and running after a CPU upgrade. Once I receive the thermal paste updating my Beast is the 1st order of business!
It sucks that the UBKK2 firmware never allowed any kind of an update, it makes me wonder if I'd even get the ICS update when it's released on March 15 or shortly thereafter. Of course that's according to the rumor mill and I'm simply referring to that since the SGSII's received their ICS earlier today according to SanFirnware.
So who knows? Again, I thank everyone fir their help and input.
Jim G.
Direct from my Samsung Galaxy Note GT-N7000
hello XDA members
I have the samsung tab s2 T715 from Emirates
I did manually check for an update today and got this in the picture
Have fun
Cool hoping 815 follows
Sent from my SM-G935F using XDA-Developers Legacy app
Hello.
I have a German unbranded device.
Since I did not want to wait for Samsung I installed the update myself by getting the already released version they seed in Italy since a few days.
Almost the same. Lte and German Sim card working, everything like if is supposed to. I think installing the Italian update is not a problem.
Works like a charm. Much faster then before. Some screens are following. I can recommend it to everyone that doesn't want to longer. St least for me there's is no problem.
StilleWaesser said:
Hello.
I have a German unbranded device.
Since I did not want to wait for Samsung I installed the update myself by getting the already released version they seed in Italy since a few days.
Almost the same. Lte and German Sim card working, everything like if is supposed to. I think installing the Italian update is not a problem.
Works like a charm. Much faster then before. Some screens are following. I can recommend it to everyone that doesn't want to longer. St least for me there's is no problem.
Click to expand...
Click to collapse
Is a factory reset needed? Or can you keep all your apps and settings?
Slurm said:
Is a factory reset needed? Or can you keep all your apps and settings?
Click to expand...
Click to collapse
All kept like normal update OTA. Just in download mode, installed update, took less then 5 Minutes and everything like before, except new Android version. Pretty smooth.
StilleWaesser said:
All kept like normal update OTA. Just in download mode, installed update, took less then 5 Minutes and everything like before, except new Android version. Pretty smooth.
Click to expand...
Click to collapse
Great, I think I'll update too!
Some more pictures
StilleWaesser said:
Hello.
I have a German unbranded device.
Since I did not want to wait for Samsung I installed the update myself by getting the already released version they seed in Italy since a few days.
Almost the same. Lte and German Sim card working, everything like if is supposed to. I think installing the Italian update is not a problem.
Works like a charm. Much faster then before. Some screens are following. I can recommend it to everyone that doesn't want to longer. St least for me there's is no problem.
Click to expand...
Click to collapse
Is your device a T715 or T715Y? Does it even make any difference? I have a T715Y (imported from China, I think) and have downloaded the Nougat ROM (which is noted as being for T715 (but not specifically fore the T715Y) from Sammobile and tried installing it using Odin 3.12 but it fails. I also tried using Odin 3.11 which also fails. Both ran as Administrator.
Current ROM Build Number is T715YDXU2BPJ1
Can anyone give me some idea of where I might be going wrong?
GrandMasterPlank said:
Is your device a T715 or T715Y? Does it even make any difference? I have a T715Y (imported from China, I think) and have downloaded the Nougat ROM (which is noted as being for T715 (but not specifically fore the T715Y) from Sammobile and tried installing it using Odin 3.12 but it fails. I also tried using Odin 3.11 which also fails. Both ran as Administrator.
Current ROM Build Number is T715YDXU2BPJ1
Can anyone give me some idea of where I might be going wrong?
Click to expand...
Click to collapse
I think you need a rom for your device (https://www.sammobile.com/firmwares/database/SM-T715Y/).
For me the update with the italian version worked great and I now have a german-austrian-italian S2 :laugh:
I have sm t 715 without y. Differences between the both devices I don't know but I'd suggest you wait until the proper firmware is release for your device. As far as I see there is no android 7 rolled out four your device.
Any ETA on Android 7.0 for the real SM-T715Y? Does anybody know anything?
I got the SM-T710 XSA Nougat update some time ago now. But I bought the 4G version off Gumtree and it is still stuck with 6.0.1 which means the lowlife carriers are probably halting the updates.
It is disgusting. With carrierless Samsung Galaxy smartphones, Samsung waits for the carriers in XSA region to start to release their crapware, before they release the official Samsung firmware. I do not know if this occurs in other regions.
FYI, the SM-T715Y is the real Tab S2. The SM-T715 has very few firmware regions and was probably made for dodgy countries with outdated cell towers. Look them up on sammobile.com/firmwares
Thanks people!
Hi all, I'm a US user with W09 and would like to get it to Nougat - I have read the entire "Update to EMUI 5.0" thread and there appeared to be several possible routes, but most were regarding the European version.
I have a US Wi-Fi model and have no allegiance in keeping it a US one, if there's a way to remove the regional aspect to gain access to the update (BETA or otherwise).
I would greatly appreciate if someone who has some experience with or is very confident of the correct path would shed some light for me.
Thank you!
Have you tried update via Firmware Finder? Witch firmware version do you have now?
Sent from my Nexus 6 using Tapatalk
33adi said:
Have you tried update via Firmware Finder? Witch firmware version do you have now?
Click to expand...
Click to collapse
I've just finished reading the entire thread linked above that mentions that method a number of times, so I'm certainly familiar with it, but haven't tried it because sprinkled throughout that thread are plenty of issues encountered. Also, there's no mention of US hardware/firmware specific instructions.
I'm on W09 as mentioned in the OP - thanks for the reply!
Install Firmware Finder from Playstore and post a screenshot with firmwares that appear there.
Sent from my Nexus 6 using Tapatalk
33adi said:
Install Firmware Finder from Playstore and post a screenshot with firmwares that appear there.
Click to expand...
Click to collapse
I'm away from my tablet at the moment but will do later on when I get home.
We will see after that what we can do. I have updated my tablet to Nougat, but I have BTV-DL09 (4G European version).
To change region I think you have to unlock bootloader.
Sent from my Nexus 6 using Tapatalk
33adi said:
We will see after that what we can do. I have updated my tablet to Nougat, but I have BTV-DL09 (4G European version).
To change region I think you have to unlock bootloader.
Click to expand...
Click to collapse
Here's what's in firmware finder @33adi
What's the advantage to switching from US to EU roms? I unlocked, rooted, enabled 5ghz band for wifi, and now only need nougurt but much like the original poster not sure the best route.
Sent from my BTV-W09 using Tapatalk
gaidin43 said:
What's the advantage to switching from US to EU roms? I unlocked, rooted, enabled 5ghz band for wifi, and now only need nougurt but much like the original poster not sure the best route.
Click to expand...
Click to collapse
The advantage of removing the US stock rom is that the European one has a beta available that is very stable. My thread is seeking someone who's confident of the steps to 1st going European & 2nd installing nougat once there, as there was some debate of complexity to doing even that.
I've been through exactly what you are wanting to do @dutchdoggs54 . Unfortunately I can't tell you step by step how I got to where I'm at.
I was on W09128BXXX out of the box . Read the topic that you have linked in your first post and decided to do it using firmware finder to force the update to Nougat as they described. It actually went very well and Nougat worked great with the exception of Bluetooth not working.
I have to say during the upgrade when it booted into recovery and it was TWRP I was concerned. Believe it had an error but it worked and replaced TWRP as I recall with a stock recovery.
So after all that I decided I wanted my tablet branded as a BTV-W09C100B006. Below is the topic where a member thought they bricked their tablet.
https://forum.xda-developers.com/mediapad-m3/how-to/bricked-m3-btv-w09-t3612699
They were given directions to download the Full update package for the version I just mentioned.
This member got their tablet working again and in the process found that 5Ghz wifi is enabled on C100B006 by default.
That was the main reason I rooted my tablet.
I followed the directions knowing I force install a different version of Nougat from your link.
Downloaded the full version software and dropped it in the dload folder on my US tablet and did the upgrade.
Tablet rebooted and shortly after it rebooted again going to recovery (I tried may times to boot). Don't recall the error but after I unlocked my bootloader again it reset the tablet and I was able to access it again. I did relock the bootloader so I can see updates without any problems after that.
In the end I got what I was after. My tablet shows as a BTV-W09C100B006 and can check for updates.
5Ghz wifi is enabled by default. As I said I relocked the bootloader so I'm not rooted. Overall it's works so well I'll wait for Nougat to get released and then do the official upgrade. After the scare of booting to recovery it was worth every nervous minute of it.
Try to talk to OP from this thread:
https://forum.xda-developers.com/p9/...-root-t3374068
Maybe he can make this app available to Mediapad M3, then changing OEMINFO will be easy.
I posted a question there.
No luck
Ok, so I tried following @Samavb's great instructions and guidance in the other thread last night. Made it all the way to the point where he says to install 009 from the Huawei website - got it downloaded and loaded up on the tablet only to find that it wouldn't install because the 009 file on the website is BTV-DL09 not the BTV-W09 version a US tablet would need.
So I got frustrated and tried installing the B301 build that appeared on firmware finder when I was on the W09-006 build...this was nougat and was cool but no keyboard and the play store wouldn't install anything, so I was forced to revert back to 006.
So, long story short, hours of work have confirmed that there doesn't appear to be a way to get a US tablet to fully functional Nougat at the moment. If there was a 009 or 010 build like Samavb mentions for the US model, maybe it would work, but those aren't anywhere to be found - firmware finder, russian site he mentions or otherwise.
So, I'll happily sit on 006 and wait for a US OTA update. That is unless anyone can tell me exactly how to make this US model into a European model.
Same boat as original poster. US w09 on build c128b003. Firmware finder just finds the same version. Anyone know when there might be a us version update released. I thought it was supposed to be may so have been waiting patiently.....but may is over.
dr_pepper said:
Same boat as original poster. US w09 on build c128b003. Firmware finder just finds the same version. Anyone know when there might be a us version update released. I thought it was supposed to be may so have been waiting patiently.....but may is over.
Click to expand...
Click to collapse
In Firmware Finder select the menu in the top left corner. (3 bars)
Right below your model number, select change model and enter BTV-W09C100 and then search.
You should see B301 and it's a full OTA. However, as I understand it this is just a beta/test release.
Only issue I had with it, bluetooth didn't work. Seeing as how I don't use it, didn't bother me.
I highly recommend you fall back to the other topic about forcing the upgrade to Nougat.
Only difference from my tablet and yours. I was on C128B002. I had already rooted and couldn't get that update.
Also US 64gb version here and hoping for an update to Nougat and EM5. Would love to see it!
Huawei have been quite attentive for updates in other markets which is great. Too bad the non-LTE version in US doesn't get the same love.
Buying this tablet was a roll of the dice for me, banking on the hope that Huawei would be attentive to software updates (for all markets) and custom ROMs could serve as back up/enjoyment. This tablet has solid hardware and with another launcher it is decent.
Sadly, my experiment to try out a non-Nexus device without the latest (or close to pure) Android version is coming to an end. The last M3 sold on Swappa went for around $300.
johninsf said:
Also US 64gb version here and hoping for an update to Nougat and EM5. Would love to see it!
Huawei have been quite attentive for updates in other markets which is great. Too bad the non-LTE version in US doesn't get the same love.
Buying this tablet was a roll of the dice for me, banking on the hope that Huawei would be attentive to software updates (for all markets) and custom ROMs could serve as back up/enjoyment. This tablet has solid hardware and with another launcher it is decent.
Sadly, my experiment to try out a non-Nexus device without the latest (or close to pure) Android version is coming to an end. The last M3 sold on Swappa went for around $300.
Click to expand...
Click to collapse
I just updated the firmware finder app and it now shows the full ota for nougat. It wasn't found until I updated the app.
purple lady said:
I just updated the firmware finder app and it now shows the full ota for nougat. It wasn't found until I updated the app.
Click to expand...
Click to collapse
Excellent and great news! Are you in the US and have the wifi only version?
johninsf said:
Excellent and great news! Are you in the US and have the wifi only version?
Click to expand...
Click to collapse
Yep.
Thanks Purple Lady!
Too anyone in this thread, I want to install the latest version available in Firmware Finder.
When I select download, I get 3 file choices. Which should I pick to download then what are the steps to update? Please point me to the best post to reference as there are a few.
johninsf said:
Thanks Purple Lady!
Too anyone in this thread, I want to install the latest version available in Firmware Finder.
When I select download, I get 3 file choices. Which should I pick to download then what are the steps to update? Please point me to the best post to reference as there are a few.
Click to expand...
Click to collapse
from what i gather. if you're going from MM to Nougat, you need to install the Full OTA. for that, there are 2 files, you will need both of them. from there, i'm not sure.
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
What is your build number and android version I want to know
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
I guess so as i did tried to reflash stock ROM with Mobile Upgrade Q 5.0.0 a few days ago, but it didn´t work. Then i used Mobile Upgrade Q 5.1.8 but it displayed that i had the latest software so no reflashing at all, i was incapable of reflashing and clearing the \system partition, for me it is a real problem as i was expecting to delete all the traces of SuperSU root, Xposed, etc; with the aim of moving to Magisk and keep passing safetynet. Anyone has any clue so that could help me reflashing latest stock MM ROM?
Use the Panasonic ELUGA to restore an then the Mobile Upgrade .
r_ramalho said:
Use the Panasonic ELUGA to restore an then the Mobile Upgrade .
Click to expand...
Click to collapse
Hello @r_ramalho is there a guide using both softwares?
https://forum.xda-developers.com/idol-3/help/bootloop-idol-3-6045y-t3365495
View that post , first recover using ELUGA Switch from the link in the post above , then after the phone boots , shutdown and use the Mobile Upgrade to restore the stock rom .
r_ramalho said:
https://forum.xda-developers.com/idol-3/help/bootloop-idol-3-6045y-t3365495
View that post , first recover using ELUGA Switch from the link in the post above , then after the phone boots , shutdown and use the Mobile Upgrade to restore the stock rom .
Click to expand...
Click to collapse
I was also considering downgrade to LP by performing a restore from my TWRP backup. May be easier and safer, as ELUGA modifies certain branded partitions, I guess... Any inconvenience related to that?
I have never got the mobile upgrade to work, not even this version, and that is a shame because here in Finland we have no OTA since lollipop, and I can not understand how the official MM-rom is nowhere to be found, even if the phone have the option of update from storage. If only I could find the update file, I presumably could update without any rooting or twrp or anything, and keep it factory fresh and under warranty?
bowtie81 said:
I have never got the mobile upgrade to work, not even this version, and that is a shame because here in Finland we have no OTA since lollipop, and I can not understand how the official MM-rom is nowhere to be found, even if the phone have the option of update from storage. If only I could find the update file, I presumably could update without any rooting or twrp or anything, and keep it factory fresh and under warranty?
Click to expand...
Click to collapse
I agree with you, that is a bad movement from Alcatel not to give access to ROM zip. It would be so easy to flash it via settings _ apply update from zip, as many devices do. Weeks ago I was desperate to find a stock zip for my 6045Y but no luck. It's a shame to let dye this music lover smartphone.
I have the stock MM rom if anybody wants it.
Bogdan28 said:
I have the stock MM rom if anybody wants it.
Click to expand...
Click to collapse
I'm very interested, did you get it from a TWRP backup or which method did you used?
Could you upload it?
Thanks in advance
ciclolars said:
I'm very interested, did you get it from a TWRP backup or which method did you used?
Could you upload it?
Thanks in advance
Click to expand...
Click to collapse
The roms are from murigny64, he made them. He has a thread here which I checked earlier. If you want the version without root the link is still good, only the rooted version was removed.
Bogdan28 said:
The roms are from murigny64, he made them. He has a thread here which I checked earlier. If you want the version without root the link is still good, only the rooted version was removed.
Click to expand...
Click to collapse
Thanks for the quick reply, i did a search and found the tread https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 However, i have a more recient MM Stock ROMs with many fixes (in the version of this URL 2016/08/10 the MM ROMs has a bug that unables the phone to record call, am i wrong?).
I'm not sure what to do and even can´t update from the latest MM from a couple of days ago, https://forum.xda-developers.com/idol-3/help/ota-android-update-malware-t3736229 As Mobile Upgrade Q says that my 6045Y has the latest software, may be an update to only 6045I model?
ciclolars said:
Thanks for the quick reply, i did a search and found the tread https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 However, i have a more recient MM Stock ROMs with many fixes (in the version of this URL 2016/08/10 the MM ROMs has a bug that unables the phone to record call, am i wrong?).
I'm not sure what to do and even can´t update from the latest MM from a couple of days ago, https://forum.xda-developers.com/idol-3/help/ota-android-update-malware-t3736229 As Mobile Upgrade Q says that my 6045Y has the latest software, may be an update to only 6045I model?
Click to expand...
Click to collapse
I don't know about the record call thing, I don't use it.
As for the second part I'm not sure I understand. You want the latest OTA update or you already have it
Bogdan28 said:
I don't know about the record call thing, I don't use it.
As for the second part I'm not sure I understand. You want the latest OTA update or you already have it
Click to expand...
Click to collapse
Sorry, i didn't explain myself properly. I mean, I have already the latest MM stock ROM dated from january of 2017, my device is a 6045Y. However, a few days ago there has been released an update, but my guess is that only for 6045I devices, so i don't have it and can´t reflash my Idol 3 with the same ROM i currently have.
PS:
I tried to flash via TWRP this zip https://forum.xda-developers.com/idol-3/development/6045y-mm-6-0-1-firmware-european-idol3-t3435577 and then use the Mobile Upgrade Q to get the latest MM stock, but Mobile Upgrade Q keeps saying "you have already the latest update" which this statement is not true after flashing this zip. Finally, I restored my TWRP backup so i'm in the same state as i began this morning, i'm tired of this policy of Alcatel that there is no official zip from stock firmwares, the only way is using an online tool thar refuses to reflash the same firmware.
I am from india, using 6045k, lost duel sim support due to flashing of marionette's Rom. Still trying to get duel sim back, tried eluga firmware also, but unfortunately i didn't get any error at 45%. Now i am using flyos 2.0, its working like charm. But only one sim is there, i tried several software upgrader versions, but server is not connecting, its always stuck at 20%.
Its been a year that i am trying to get to stock rom. I have done search in several threads and contacted some senior members but it didn't help,
Pls help me, how can i get back to stock rom and get duel sim Support back??
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
Thank god, today I got my phone to stock rom, by using q5.1.8.
Actually, yesterday only i heard about q.5.1.8, its been a year that i was trying to do this. Appart from q5.1.8, i connected VPN to U. S. Now everything is fine.
I dont know which one helped me, that the q5.1.8 or the VPN. :laugh:
Thanks to all.
r_ramalho said:
Hi guys,
Tried using Mobile Upgrade Q 5..0.0 and it would not download the software , always stuck at 20/100 .
Tried Mobile Upgrade Q 5.1.8 and it works ! Download was super fast , less then 5 minutes and installed fine.
Just choose 6045 from the list .
Mobile Upgrade Q 5.1.8 download:
https://mega.nz/#!3N8SmaTC!Z4of6DL58tnKzJzYXCSO_hZ0UOMql2H13ZkATwvy8G8
Click to expand...
Click to collapse
Thanks! This helped fix a bricked phone.
i am looking for alcatel idol 3 4.7 stock rom. Build number 6039y
can anyone help me with it?
https://forum.xda-developers.com/idol-3/general/guide-restore-idol-3-to-factory-rom-t3769739 this may be what anyone is looking for.
Deleted
Maybe because the Sprint Oreo will be using BLv6 so its 2 numbers behind everyone else? lol ... anyone have any thoughts about what the BL-version could possibly be for the Sprint Oreo? ... could they or would they use a BLv4 like everyone else?
that was the Sprint answer
SprintBama said:
Maybe because the Sprint Oreo will be using BLv6 so its 2 numbers behind everyone else? lol ... anyone have any thoughts about what the BL-version could possibly be for the Sprint Oreo? ... could they or would they use a BLv4 like everyone else?
Click to expand...
Click to collapse
If anything, they would change it to v7. Maybe they are waiting for a merger, which could happen next week
I checked for update today and got 1627.64mb g930pvpu6cre7 Samsung experience 9.0 with oreo.
I haven't gotten an update from Sprint on my S7 since December 2016. I am still on some random Nougat beta version.
I thought a brand new firmware update to Oreo would reset whatever bug was in there causing this, but it looks like one person in my house got the Oreo update and mine is still saying I am up to date when I check manually.
Is there no longer an ODIN for macOS? I thought there was one, but I used it on another Mac maybe 4 years ago when I was on my S3 and rooting it. Doesn't seem to exist anymore.
Just received oreo on my s7 for boost. So far I'm not impressed. I was really hoping for Dolby on this but guess not. The build number is SMG930PVPU6CRE7
kalala said:
I haven't gotten an update from Sprint on my S7 since December 2016. I am still on some random Nougat beta version.
I thought a brand new firmware update to Oreo would reset whatever bug was in there causing this, but it looks like one person in my house got the Oreo update and mine is still saying I am up to date when I check manually.
Is there no longer an ODIN for macOS? I thought there was one, but I used it on another Mac maybe 4 years ago when I was on my S3 and rooting it. Doesn't seem to exist anymore.
Click to expand...
Click to collapse
On Mac you can use Heimdall to flash the latest Nougat firmware then update through OTA to Oreo. Because there isn't any firmware file yet on Updato or Sammobile.
i manfully updated @ 4:15. they sent it @ 1627.64 mb. still downloading. when I got my att update I tried all the batch root methods for my 935a. saving magisk for last bc I didn't have the boot.img for the cre4 update.
I I only had the "att beta" update from March. long story short it won't boot with the nougat eng.boot. I gave it an hour. I cleared the cache, factory reset, tried to add flash all of the earlier img files I had for oreo, nothing worked. had to flash it back to nougat bra1. I immediately requested the update again. they approved. the next day I attempted to flash magisk 16.4. w/ the modified odin 3.1.3 version. it wouldn't flash. with the cre4 boot.tar in hand, I tried every method on gods green earth to gain some sort of r/w access. it was late, I was tired, I flashed the eng boot. once again it was stuck at the Samsung boot logo. it wouldn't allow me into recovery to push the cre4 update zip. once again I'm back to bra1 nougat. I booted into recovery & updated it from the sd card. when it booted I noticed it wasn't anywhere as clean & polished as the ota I had twice. I've flashed back to brd1 ten times, & requested the ota. after smart switch, I used all the avail windows software I could acquire & kept trying, they won't send it. but they did provide me with a new picture for my samsung account. I'll post it later. gotta check out this 930p oreo.
razor001_ said:
On Mac you can use Heimdall to flash the latest Nougat firmware then update through OTA to Oreo. Because there isn't any firmware file yet on Updato or Sammobile.
Click to expand...
Click to collapse
I don't think Heimdall works on High Sierra or even Sierra anymore.
I'm wanting to move to a SM-930U version of stock android on my 930P. But in struggling to do so for the past couple of weeks I finally figured out that sprint as updated the bootloader to version 5 and most of the firmware images for 930U are version 4 (android 7 nugut). (PU4 vs PU5) which results in a Odin fuse error.
The phone is currently nagging me to go from PU5BQL1 to BU6BRD2. If I understand the nameing convention that would move me to version 6 of the bootloader.
What are the odds I can move to oreo for 930U and avoid the bootloader fuse issue? I think I also understand that as of this posting date a 930U oreo firmware has not been released?
schmism said:
I'm wanting to move to a SM-930U version of stock android on my 930P. But in struggling to do so for the past couple of weeks I finally figured out that sprint as updated the bootloader to version 5 and most of the firmware images for 930U are version 4 (android 7 nugut). (PU4 vs PU5) which results in a Odin fuse error.
The phone is currently nagging me to go from PU5BQL1 to BU6BRD2. If I understand the nameing convention that would move me to version 6 of the bootloader.
What are the odds I can move to oreo for 930U and avoid the bootloader fuse issue? I think I also understand that as of this posting date a 930U oreo firmware has not been released?
Click to expand...
Click to collapse
almost zero... asuming that Oreo for "U" Variants step up with BL on this month maybe next one, is something pausible but stepping up two versions in any short time is questionable... but who knows. The best you can do is wait this or the next month for BL update on U variants.
To be clear I'm still on version 5. I will continue to put off the upgrade to 6.