Related
So I had my s7 edge completely naked for a while with just a dbrand skin (stupid, I know). I eventually dropped it and after a horrible two-week process I finally have it back and fixed. I've been looking at cases and screen protectors, but the reviews are so biased it's hard to tell what's good. Currently, I'm looking at a case from "carved" (it's my first post so I can't post their link). They're very stylish but have no bumper over the screen so I will definitely need a screen protector. Obviously, tempered glass is best but there seem to be no good covers in that regard. If anyone has any suggestions I would love to hear what you're using on your s7 edge (both cases and screen protectors)!
I use a stilgut ultra thin flip case, I tried a plain tpu screen protector and i consider myself an expert at installation for those things and the weird corners would pull up and even 1 edge i didnt want any dirt getting under it so i use the flip case that covers the bare screen without protector.
im using this screen protector http://www.ebay.com/itm/Spigen-Curv...851711?hash=item3abf325bbf:g:e8YAAOSwYmZXDYtx and this case http://www.ebay.com/itm/Poetic-Revo...hash=item236daa365b:m:meyHa-dwSsHGbglEUNxCTmA, it doesnt add alot of bulk in my opinion and feels great
Skinomi full body for me, no problem.
Using spigen ultra hybrid case
https://www.amazon.com/gp/aw/d/B01A...tra+hybrid&dpPl=1&dpID=31aCpLMbROL&ref=plSrch
and armorsuit case friendly screen protector
https://www.amazon.com/gp/aw/d/B01A...+armorsuit&dpPl=1&dpID=51WtCcEuicL&ref=plSrch
Several drops about 5 or 6 times mostly on ceramic surface and there is no damage what so ever to the phone nor the case.
I've just come from an S4 to an S7. I'm used to tempered glass protectors, because they're super easy to apply and give the feeling of a premium screen + that added protection. However, I was unable to find a decent tempered glass screen for the edge. The first one didn't fit properly, and left ridges which made the edge panel unpleasant to use. The second one was too thick, and the edges were being caught by my plastic Spigen case. The third felt fragile when applying it and cracked within a few days of just being in my pocket. All of the other ones were basically square and therefore the edges weren't covered at all. I gave up at that point.
I didn't want a PET film screen. I've used them for years, going all the way back to a 5800 XpressMusic, also on my S1 and my Nexus 4, and usually with horrific results. They scratch easily, they lift easily, they never tend to sit right which means you get dust patches in the corners and their light output is usually awful, especially the gloss ones. Give them a few months, and the light output will be unbearable due to the amount of scratches..
Step foward.... TPU Screen Protectors There's a guy selling two for £2.45 on eBay delivered. These things are a bloody revelation to me, I'd never heard of them until I got this phone. I can't believe people are persevering with the tempered glass screens for the Edge. These babies really are the way forward for this phone. The TPU is basically elastic which means it covers the edges perfectly, and it is thin enough not to be caught or interfered with by my case. Supposedly, the TPU is self-healing: basically light and medium scratches effectively disappear thanks to the elasticity of the plastic filling in the gaps, and I can see what they mean. A normal PET Protector for me, would usually be scratched all over by now, yet this TPU protector, you really wouldn't know that it was applied at all. It's completely spotless. No bubbles either which I've only ever achieved with tempered glass protectors. In fact, the only way you can tell this protector is applied at all, is because you can see the pre-cut holes for the camera and sensors at the top. Check out the light output too!!! The only thing that comes close is a tempered glass protector, and I would even go as far as saying this TPU one might even be better!!! (because it has less light reflection)
Tempered glass protectors maybe the hot fashion at the moment, but honestly, I don't think you can go far wrong with the TPU ones for this phone. I am aware that tempered glass protectors give a layer of impact protection too, but that's for you to decide. How many times have you smashed your screen etc? Do you really need that impact protection? If you do, would a standard TPU case be enough, or is the glass protector important....
Edit: @sa3d12 has linked to the case I'm using, the Spigen one.
Thanks all for the recommendations, this has really helped my search
skezza said:
I've just come from an S4 to an S7. I'm used to tempered glass protectors, because they're super easy to apply and give the feeling of a premium screen + that added protection. However, I was unable to find a decent tempered glass screen for the edge. The first one didn't fit properly, and left ridges which made the edge panel unpleasant to use. The second one was too thick, and the edges were being caught by my plastic Spigen case. The third felt fragile when applying it and cracked within a few days of just being in my pocket. All of the other ones were basically square and therefore the edges weren't covered at all. I gave up at that point.
I didn't want a PET film screen. I've used them for years, going all the way back to a 5800 XpressMusic, also on my S1 and my Nexus 4, and usually with horrific results. They scratch easily, they lift easily, they never tend to sit right which means you get dust patches in the corners and their light output is usually awful, especially the gloss ones. Give them a few months, and the light output will be unbearable due to the amount of scratches..
Step foward.... TPU Screen Protectors There's a guy selling two for £2.45 on eBay delivered. These things are a bloody revelation to me, I'd never heard of them until I got this phone. I can't believe people are persevering with the tempered glass screens for the Edge. These babies really are the way forward for this phone. The TPU is basically elastic which means it covers the edges perfectly, and it is thin enough not to be caught or interfered with by my case. Supposedly, the TPU is self-healing: basically light and medium scratches effectively disappear thanks to the elasticity of the plastic filling in the gaps, and I can see what they mean. A normal PET Protector for me, would usually be scratched all over by now, yet this TPU protector, you really wouldn't know that it was applied at all. It's completely spotless. No bubbles either which I've only ever achieved with tempered glass protectors. In fact, the only way you can tell this protector is applied at all, is because you can see the pre-cut holes for the camera and sensors at the top. Check out the light output too!!! The only thing that comes close is a tempered glass protector, and I would even go as far as saying this TPU one might even be better!!! (because it has less light reflection)
Tempered glass protectors maybe the hot fashion at the moment, but honestly, I don't think you can go far wrong with the TPU ones for this phone. I am aware that tempered glass protectors give a layer of impact protection too, but that's for you to decide. How many times have you smashed your screen etc? Do you really need that impact protection? If you do, would a standard TPU case be enough, or is the glass protector important....
Edit: @sa3d12 has linked to the case I'm using, the Spigen one.
Click to expand...
Click to collapse
The process that I went through to get my phone fixed took so long and was so horrible that I REALLY dont want to break it again and I want to make sure I have good protection. The TPU protectors look pretty cool though, and ill look for some!
skezza said:
These things are a bloody revelation to me, I'd never heard of them until I got this phone. I can't believe people are persevering with the tempered glass screens for the Edge. These babies really are the way forward for this phone.
Edit: @sa3d12 has linked to the case I'm using, the Spigen one.
Click to expand...
Click to collapse
I can explain this to you in full.
That's because most of us had used those TPU screen protectors for several years before the tempered glass screen protectors came out and the tempered glass screen protectors are a giant leap forward over TPU/film/wet application style screen protectors. This was before we were forced into curved edge screens. You see, before the large screen devices were basically only the Samsung Note series which all had very large screens that were flat and tempered glass screen protectors were absolutely the best option, especially using the S Pen, the TPU protectors are rubbery and there are indentations and marks left on them that doesn't happen on glass. Additionally if you ever drop your phone on it's screen with the TPU/film type protectors your screen is still trashed. I have personally had multiple phones with tempered glass screen protectors that had the protector shattered but the screen underneath was left pristine. Also the responsiveness and accuracy of the pressure sensitive spen functionality just is horrible with a film type screen protector but is perfect with glass.
With the Note 5, S6 Edge Plus people could still get a 5.5" + screen with the compatibility of a tempered glass screen protector.
Fast forward and suddenly Samsung decided that to get a 5.5-5.7 inch screen you must also get a curved edge screen starting with the S7 Edge/Note 7. So now everyone is looking for the superior look/feel/protection of the tempered glass screen protector and none of the manufacturers seem to be able to produce one that actually fits, adheres correctly and stays put without allowing dust and crap underneath them. None of them work well which is why this and many other threads like it exist. Nobody is debating the superiority of the tempered glass over the TPU screen protectors. Tempered glass is simply better in all regards. The fact you just now suddenly found a TPU screen protector and have fallen in love with it and can't figure out why we haven't all just done that is not a new paradigm. You simply missed out on years of crappy TPU screen protectors to put into perspective just how much better glass is, because getting one to fit properly was never an issue prior to 2016.
Welcome to the past. Don't drop that phone on it's screen. You'll be peeling your TPU screen protector up to reveal a smashed screen and then be like the rest of us......angry that large screen device manufacturers like Samsung have fallen in love with a mostly gimmicky non-functional curved edge screen in exchange for being robust and functionally sound.
neyenlives said:
I can explain this to you in full.
That's because most of us had used those TPU screen protectors for several years before the tempered glass screen protectors came out and the tempered glass screen protectors are a giant leap forward over TPU/film/wet application style screen protectors. This was before we were forced into curved edge screens. You see, before the large screen devices were basically only the Samsung Note series which all had very large screens that were flat and tempered glass screen protectors were absolutely the best option, especially using the S Pen, the TPU protectors are rubbery and there are indentations and marks left on them that doesn't happen on glass. Additionally if you ever drop your phone on it's screen with the TPU/film type protectors your screen is still trashed. I have personally had multiple phones with tempered glass screen protectors that had the protector shattered but the screen underneath was left pristine. Also the responsiveness and accuracy of the pressure sensitive spen functionality just is horrible with a film type screen protector but is perfect with glass.
With the Note 5, S6 Edge Plus people could still get a 5.5" + screen with the compatibility of a tempered glass screen protector.
Fast forward and suddenly Samsung decided that to get a 5.5-5.7 inch screen you must also get a curved edge screen starting with the S7 Edge/Note 7. So now everyone is looking for the superior look/feel/protection of the tempered glass screen protector and none of the manufacturers seem to be able to produce one that actually fits, adheres correctly and stays put without allowing dust and crap underneath them. None of them work well which is why this and many other threads like it exist. Nobody is debating the superiority of the tempered glass over the TPU screen protectors. Tempered glass is simply better in all regards. The fact you just now suddenly found a TPU screen protector and have fallen in love with it and can't figure out why we haven't all just done that is not a new paradigm. You simply missed out on years of crappy TPU screen protectors to put into perspective just how much better glass is, because getting one to fit properly was never an issue prior to 2016.
Welcome to the past. Don't drop that phone on it's screen. You'll be peeling your TPU screen protector up to reveal a smashed screen and then be like the rest of us......angry that large screen device manufacturers like Samsung have fallen in love with a mostly gimmicky non-functional curved edge screen in exchange for being robust and functionally sound.
Click to expand...
Click to collapse
Wow, that's some reply lol. A few things though:
-I think you're asserting that TPU protectors were the norm before Tempered Glass protectors. They weren't, certainly not in my experience. Everyone and their dog were using PET film protectors before tempered glass ones came out. I'd say those who used TPU were probably in the minority really. Tempered Glass protectors are of course the best option, but quite evidently, we're struggling to find ones that actually fit nicely.
-I am very happy with tempered glass protectors that fit, but ultimately, the ones I bought don't. I've settled for a TPU protector because it actually looks nice and feels fine.
-Dropping your phone doesn't always result in a smashed screen. If you've got a case on it, you might be lucky. I dropped my phone many a time with a PET film and it survived. That's the case for you.
Nobody forced you to buy a Samsung Edge phone dude? The standard S7 is not curved and is considered by some to be a better phone than the Edge. Or you could have had an LG G5 or the Pixel phone? Sounds like you're suffering a bit of buyers remorse here. Get an S7 and your glass protector then be happy
@skezza, fast forward 4 1/2 months, and I'm curious how your TPU screen protector is holding up. I just got an S7 Edge, and so I'm in the market for a good screen protector. Right now, Armorsuit's "self healing" TPU protectors are going for under $8, so even if it only lasts a few months, that's not a bad deal.
TIA!
skezza said:
Wow, that's some reply lol. A few things though:
-I think you're asserting that TPU protectors were the norm before Tempered Glass protectors. They weren't, certainly not in my experience. Everyone and their dog were using PET film protectors before tempered glass ones came out. I'd say those who used TPU were probably in the minority really. Tempered Glass protectors are of course the best option, but quite evidently, we're struggling to find ones that actually fit nicely.
-I am very happy with tempered glass protectors that fit, but ultimately, the ones I bought don't. I've settled for a TPU protector because it actually looks nice and feels fine.
-Dropping your phone doesn't always result in a smashed screen. If you've got a case on it, you might be lucky. I dropped my phone many a time with a PET film and it survived. That's the case for you.
Nobody forced you to buy a Samsung Edge phone dude? The standard S7 is not curved and is considered by some to be a better phone than the Edge. Or you could have had an LG G5 or the Pixel phone? Sounds like you're suffering a bit of buyers remorse here. Get an S7 and your glass protector then be happy
Click to expand...
Click to collapse
So just to be clear, you decided to hop on a thread about screen protectors, basically call everyone foolish for wanting impact protection, and then suggest that we get a different phone? What?!?
Most of us chose the S7 edge because of the many hardware advantages over other phones. The curved screen was something we were willing to put up with because the hardware was so great. It's not crazy to want a tempered glass cover (which protects from scratches AND impact) to get full protection for our $500+ phone. If you've figured out a way to ensure your phone never lands on its face, then congratulations.
So, getting "an S7 and your glass protector then be happy" is not a solution. It's an asinine, unhelpful answer that doesn't provide a real solution.
usn.mustanger said:
@skezza, fast forward 4 1/2 months, and I'm curious how your TPU screen protector is holding up. I just got an S7 Edge, and so I'm in the market for a good screen protector. Right now, Armorsuit's "self healing" TPU protectors are going for under $8, so even if it only lasts a few months, that's not a bad deal.
TIA!
Click to expand...
Click to collapse
Very happy. Few more scratches now but worth every penny.
---------- Post added at 09:36 PM ---------- Previous post was at 09:35 PM ----------
gs7ephoneguy said:
So just to be clear, you decided to hop on a thread about screen protectors, basically call everyone foolish for wanting impact protection, and then suggest that we get a different phone? What?!?
Most of us chose the S7 edge because of the many hardware advantages over other phones. The curved screen was something we were willing to put up with because the hardware was so great. It's not crazy to want a tempered glass cover (which protects from scratches AND impact) to get full protection for our $500+ phone. If you've figured out a way to ensure your phone never lands on its face, then congratulations.
So, getting "an S7 and your glass protector then be happy" is not a solution. It's an asinine, unhelpful answer that doesn't provide a real solution.
Click to expand...
Click to collapse
Lol. I think I'll just leave this. You're clearly missing the point.
Just to add, I decided to have a look at my second TPU protector today and found the adhesive was not very sticky anymore. I wonder if these things have a shelf life?
Edit: The old fashioned fairy liquid trick didn't bring it back to life either, although it has reduced some bubbles.
My screen protector I've had on for ages and I use a case by supcase
Sent from my SM-G935F using Tapatalk 2
Tempered glass?
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
twodollars2 said:
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
Click to expand...
Click to collapse
As far as I'm aware, the consensus is that tempered glass protectors with the S7 Edge and the majority of cases simply don't work.
FYI, I've tried quite a few different protectors and cases here in the UK with next to no luck.
Just thought I'd inform you of my experience
So here's what I'm using.
https://www.amazon.com/gp/product/B01MZ02Y2I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
It was easy to install and hardly noticeable.
The screen looses sensitivity and makes texting slightly difficult at times but still tolerable after you get used to it.
I also have an Otterbox Defender. I peeled the annoying screen protector off of that and installed this tempered glass protector then installed the case.
Flawless fit! Don't know anything about Zerolemon cases though.
Nevertheless, I'm very satisified with my tempered glass protector.
Also... perhaps your inquiry would have been better posted here: https://forum.xda-developers.com/s7-edge/accessories/curved-tempered-glass-screen-protector-t3320688
I used the original zagg glass and trimmed a bit off of the zerolemon case at the bottom chin.
It fits fine without modification with the new zagg glass.
I went to the extreme on this case because I been through more screen protectors than I should have. What I did was trim down the inner lip of the case that touches the screen. I used a slightly sharp exacto knife and slightly trimmed away all the hard edges surrounding the phone a little at a time. Doesn't take much trimming to get it to work. Mine looks not all that perfect but now my screen protector is good no problems
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
mine broke once & they even sent me a free replacement too!
grem323 said:
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
Click to expand...
Click to collapse
Here's a review of the GPEL one. It's not a positive one.
"Review of the GPEL Tempered Glass Screen Protector for the Samsung Galaxy S7 Edge"
https://youtu.be/FZxTsYOQdak
i've had this tempered glass for about 2.5 months now. I use it with the samsung leather case & the ringke slim case.
as long as you dont use a case that extends/overlaps over the edges this works beautifully!!
i wouldnt mind buying this again! Highly recommended!
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
the glass reviewed in the above video is gen 1 which i admit did have issues.
they had fixed most gripes with gen 2 since!
Zagg Invisible Shield glass curve for S7 Edge rocks!
mutiny said:
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
Click to expand...
Click to collapse
I ran into the same thing, but I found the Zagg Invisible Shield glass curve for S7 Edge. It is expensive, but it is a bit smaller than the others so most cases don't affect it and work fine. I'm currently using it with the SUPCASE Unicorn Beetle Hybrid case.
So far this is the only curved glass screen protector that works with anything more than a minimal case.
Here's the link to the screen protector:
https://www.zagg.com/us/en_us/invis...xy-s7-edge/glass-curve-samsung-galaxy-s7-edge
and the case:
https://www.amazon.com/SUPCASE-Unic...s=Galaxy+S7+Edge+Case,+SUPCASE+Unicorn+Beetle
I have purchased an S8+ recently and ordered some cheap cases and screen protectors off ebay. The problem is that they pick up fingerprints and look weird around edges where the adhesive is. Can anyone recommend and good screen protectors that can be bought in the UK? I'd prefer them to be case friendly as well. Thanks.
I use these with my Spigen thin case.
They have wings so tuck under the case stopping edge lift.
Samsung Galaxy S8 Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Th https://www.amazon.co.uk/dp/B071CDJBJ1/ref=cm_sw_r_cp_apap_Jd44jGqXHOFUC
Not perfect, but best I have tried yet.
mgbosshogg said:
I use these with my Spigen thin case.
They have wings so tuck under the case stopping edge lift.
Samsung Galaxy S8 Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Th https://www.amazon.co.uk/dp/B071CDJBJ1/ref=cm_sw_r_cp_apap_Jd44jGqXHOFUC
Not perfect, but best I have tried yet.
Click to expand...
Click to collapse
Yes, I've read about these but forgot about them! Thanks for this, will definitely get them.
The tech 21 screen protectors are really really nice. I have 1 on my S8 and it's fantastic even with fingerprints. It's very case friendly I have yet to have any issues with it yet.
I use Samsungs OEM screen protector.
I bought mine in Switzerland. It is a "Panzerglass" one. The phone already fell hard on the ground and the screen protector didn't even scratched, it also doesn't catch fingerprints easily.
I've tried quite a bit of screen protectors, invisible defender, white stone, spigen etc and I ended up returning them all. It's going to be trial and error for you; it's highly subjective and what you will like compared to others.
There is an XDA forum dedicated to the S8+ (rather than the S8), and there's an Accessories sub-forum within it where there are a number of threads dealing with screen protectors for the S8+
https://forum.xda-developers.com/galaxy-s8+/accessories
I've tried a few and they either mess with the edge, don't work well in my Gear VR, or like my latest glass one, somehow get specs under the screen that drive me nuts. I saw a store for "ghost armor" nearby but can't find reviews. I'd figure if I have a store install the screen protector, they'd be more experienced at it. Thoughts on ghost armor for the S8+ or any other protectors?
I bought the "Ounier Galaxy S8 Plus Tempered Glass Screen Protector, [Case Friendly][Easy Installation Tray] 3D Curved Tempered Glass Screen Protector (Black)"Due to curved edges of Galaxy S8 Plus, traditional full screen glass screen protectors will generate a halo effect on the edges. We have developed a Dot Matrix glass screen for Galaxy S8 Plus, which offers full screen protection without any bubbles or halo effects. This is accomplished with state of the art technology by placing hundreds of microscopic transparent dots on the screen protector to mimic the contact of your finger on the screen. The Tray Installation design is to make sure that the glass screen protector fits the phone perfect, and it is also convenient and easy to install.
Hey guys, For those of you who don't know me I have a channel GravX Reviews... I started it after becoming utterly pissed off with Tempered glass screen protectors for curved screens. Finally Found a good one for the S7 Edge in Whitestone Dome glass...But i wanted something you just slap on with no crazy installation...My channel was a result of that search... Hopefully this can help clarify and save you money ( I'm also writing this so you don't have to watch the video I am working on) The glass i talk about can rang from.20mm to .50mm in thickness..most are .33 mm.
This Knowledge is from testing over 400 kinds of Tempered glass over 4 years , needless to say i have a small idea of what Im talking about-( all from amazon-ebay or allibaba) im sure some of you will be ignorant enough to tell me I'm wrong and that glass truly is different..That's fine your entitled to your opinion .. All I'm doing is trying to help save people money and frustration- I wont try and sell you any product... Ive used the case friendly version for a long time because it was cheap and easy to pop off and on.. I noticed some touch issues...with all of them but i just got used to it.. In the end you get what ever you want. this is just here as a guide
All of these items can be bought on alibaba for 10-20cents for the edged adhesive ones in bulk...the re-sellers send them custom graphics for their boxes and then sell them like they designed it...( so stupid) kind of like zero lemons 5500 MAH battery case... its the same one as the 5500 MAH cases on ebay-
1st. Types of Glass screen protectors for the Galaxy S9/Plus or any protector for that matter..
Case Friendly ( any one that looks like this will be virtually identical to the next ( it might have thicker or slimmer black silk printing) ( which is the Black or white or what ever color they use) They also come in clear
https://www.amazon.com/Protector-Ca...9d-20&linkId=0e4c23f42c372db5a43d5221f96f8d2f
Pros-
Can be cheap
Works with most cases- But not all... UAG <<cough cough>>
Easy and fast to put on
Will protect your phone
oleophobic coating is cheap and comes off fast.
Cons
Edged Adhesive ( they will try to trick you by saying "full Coverage
Micro Dot matrix - AKA "pixel grid Technology" such a stupid term
"precision Grid matrix" "Perfect touch Grid" Its all the same stupid ****- Its placed into screen protectors that don't have full adhesive to assist in the identification of touch on the display by the digitizer panel
Re sellers grossly over charge for them and add Bull**** terms such as shatterproof...or ballistic or bulletproof...explosion proof- Anti Fingerprint ETC
2. Case friendly Full adhesive
They made cheap soft glass ones for the S8 and note 8 and they sucked...one side always had air bubbles.
The new Version is supposedly Hard Glass- Zagg is making the Curve glass elite
https://www.zagg.com/us/en_us/invis...protector/glass-curve-elite-samsung-galaxy-s9
I have it on order and will test it when i get it next week.
Im sure if the product is good it will have more sellers... Zagg does have a lifetime warranty which cost 5 -10 dollars to ship depending where you are, which if the product is good might make a worthy investment...But time will tell
2A- Case Friendly Privacy screens-
https://www.amazon.com/Protector-Ve...9d-20&linkId=ea6e28cfd2269ce9a43cb5ecdab9a914
Identical to the the above mentioned case friendly ones but with an extra layer of Privacy Film ( which makes it thicker
They all have edged adhesive and they are all the same product..Nothing special between sellers- NO MATTER what they say
3. Full Coverage Screen Protectors ( otterbox will sell an Alpha glass version of this that might be cut Short like the Galaxy Note 8 Version...But its the same thing...just a few inches shorter ( all pros and Cons Apply)
So many of these flood the market and they are all the same garbage with Edge strips of adhesive ( the ones for the S9 / S9 plus have thicker bands of edged adhesive...but it will still cause issues..
https://www.amazon.com/Protector-Co...9d-20&linkId=4e1080c6fdae78ae656456b35cc76aae
Pros-
Covers your entire display
Cheap
Easy to put on
Cons
Doesn't work with a lot of cases
( it does work with Casemate ToughStand and ToughMag)
Sellers overcharge for the same ****ty product ( while adding flashy words like Bullet proof or 11 lbs of protection)
Will have touch issues with the screen due to edged adhesive ( it works OK..but some people will notice a degradation of sensitivity
Micro Dots
4. Full Coverage Full adhesive
This is the same as the regular full screen one before but with Full adhesive according the seller
https://www.amazon.com/Improve-Sens...9d-20&linkId=dd8fec54bddaa1443f4d9fc10dee4983
All the Pros as the Full screen Coverage version... Just with " Full screen Adhesive"
Cons if the adhesive is truly full screen would only be case compatibility
5. Case Friendly UV Glass kits ( whitestone Dome Glass and Alibaba Generic Kit)
Whitestone- https://www.amazon.com/Protector-Gl...9d-20&linkId=bdf7dd57946aa39b9e1d31c7b35156df
Alibaba Generic ( you need to buy 10 minimum order to get them
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.30.466f2b24loSX3N
UV KIT
Pros- Japanese Glass All the above use Chinese glass - Yes you can See and feel a difference -
Crystal Clear - no Micro Dot)
Oleophobic coating is high quality and can last up too 6 months depending on usage
Hydrophobic coating can last even longer.
Sealed due to the LOCA adhesive used , meaning no water or dirt can get under the glass
Cons
Expensive
Complicated installation
Easy to mess up
If you get dirt under it your screwed
Cannot be replaced after curing is done ( well..it can but its not worth the headache cleaning it up)
If done wrong and the safeguards aren't in place you can get adhesive in your speaker grill ( use the Speaker covers included)
The whitestone Kit while a lot more expensive then the allibaba generic kit does have a warranty and Whitestone is actively involved in customer satisfaction- they were the first to market this..
White stone has the Speaker Cover stickers which are an awesome touch and requested feature by alot of us. I dont know if the Generic One has them.. I didn't see it on the Images and they supplier has not answered me yet... Since the seller is the factory that makes them for whitestone it should - i think its shaddy AF that whitestones Factory Supplier is selling the Dome Kit unbranded and at a huge price difference...but i cant say im surprised.
If i missed anything please let me know
I didn't include FILM protectors..because they are useless and i didnt include liquid coating kits becuase they are essentially snake oil and will help with water and fingerprint resistance at the most... I will however be testing these products too see if they change in the past 3 years. I hope this helps you guys! Feel free to drop by the channel and show some love and support ( only if you want )
GravX Reviews
Are there any good glass without dot matrix for those with extra Whitestone LOCA or DIY LOCA?
Cheaper UV light solution aka whitestone dome from china can be found here, and you can buy only one if you want, not 10 minimum like alibaba.
Also full screen adhesive protector aka the Zagg curve elite can be found for half the price here as well.
I bought both and will report back after i receive them.
https://www.amazon.com/gp/aw/d/B07B...l+adhesive&dpPl=1&dpID=41RhK1whyLL&ref=plSrch
This looks legit? The generic whitestone from alibaba charges too much to ship here. She charges me $21 for shipping! How much was your shipping cost?
xterminater07 said:
https://www.amazon.com/gp/aw/d/B07B...l+adhesive&dpPl=1&dpID=41RhK1whyLL&ref=plSrch
This looks legit? The generic whitestone from alibaba charges too much to ship here. She charges me $21 for shipping! How much was your shipping cost?
Click to expand...
Click to collapse
Don't get the one you linked from Amazon. That one only covers the flat part of the screen. I had something similar on my S7 Edge and you can see the rainbow effect along the edges of the screen protector.
The one on Aliexpress is $29 with UV light and $25 without. I might consider trying it.
yoyobabyyo said:
Don't get the one you linked from Amazon. That one only covers the flat part of the screen. I had something similar on my S7 Edge and you can see the rainbow effect along the edges of the screen protector.
The one on Aliexpress is $29 with UV light and $25 without. I might consider trying it.
Click to expand...
Click to collapse
I don't mind it not covering the curved part because no protector will, even whitestone doesn't cover the curved edges, but if it's full adhesive, you should not see rainbow right?
---------- Post added at 11:08 AM ---------- Previous post was at 11:02 AM ----------
mahdibassam said:
Cheaper UV light solution aka whitestone dome from china can be found here, and you can buy only one if you want, not 10 minimum like alibaba.
Also full screen adhesive protector aka the Zagg curve elite can be found for half the price here as well.
I bought both and will report back after i receive them.
Click to expand...
Click to collapse
The curved one from aliexpress is same as the curved one on amazon I linked. Both stops short of where the curve is. I wonder if the Zagg is the same?
xterminater07 said:
I don't mind it not covering the curved part because no protector will, even whitestone doesn't cover the curved edges, but if it's full adhesive, you should not see rainbow right?
---------- Post added at 11:08 AM ---------- Previous post was at 11:02 AM ----------
The curved one from aliexpress is same as the curved one on amazon I linked. Both stops short of where the curve is. I wonder if the Zagg is the same?
Click to expand...
Click to collapse
Sorry. I wasn't being clear enough in my description. What I mean was that the screen protector doesn't cover the edge screen where it starts to curve down, only the part where it is completely flat. When you swipe to bring out the edge panel, you will have to run your finger up the edge of the screen protector, like a speed bump.
I figured that was the case, probably same vendor as the amazon one as they all come out of China.
GravX said:
I didn't include FILM protectors..because they are useless and i didnt include liquid coating kits becuase they are essentially snake oil and will help with water and fingerprint resistance at the most... I will however be testing these products too see if they change in the past 3 years. I hope this helps you guys! Feel free to drop by the channel and show some love and support ( only if you want )
GravX Reviews
Click to expand...
Click to collapse
Thanks for this excellent write-up. I'm curious why you say film protectors are useless? I have been using ZAGG's invisibleSHIELD HD Clarity on my S7 and found it to be excellent. In particular, I use a thin case (Ringke) which only provides a slight recess for the screen. So when I've dropped the phone square on the screen, I've noticed that in spite of landing on pebbles or rocks, the invisible shield took the brunt of the force and eventually "healed" itself (warped back into shape) with no damage to the glass.
I've been contemplating moving to a hard glass screen protector for a while, but have been very pleased with the level of protection I've been getting from these invisible shields. What are negatives versus glass?
The invisshield seems to curve around the glass for their note 8 one so maybe their s9 one will curve as well? They use a full adhesive method but without the plastic placeholder and at $20 ish. I haven't ordered one yet. Hoping Gravx can compare it to the other protectors out their. Guy might send one out for review to Gravx if he asks for one.
Video version with curve elite
Curve elite Hands on
I should have my phone today
So I'll start the glass videos soon
I saw you mention the whitestone uses Japanese glass. Does the generic full adhesive glass from Ali use Japanese glass?
rlatjs17 said:
I saw you mention the whitestone uses Japanese glass. Does the generic full adhesive glass from Ali use Japanese glass?
Click to expand...
Click to collapse
This is what was listed in the description:
2.Made from the highest grade Japan Asahi Glass, our multilayered screen protectors are made with polished, rounded edges and provide 99.99% HD Clarity and Touch Accuracy.
Click to expand...
Click to collapse
Their product looks exactly like Whitestone's.
I got the Zagg installed on my phone at Best Buy today and i hadn't noticed till I got home at night that it doesn't really cover the edges all the way
BiigDragon said:
I got the Zagg installed on my phone at Best Buy today and i hadn't noticed till I got home at night that it doesn't really cover the edges all the way
Click to expand...
Click to collapse
I don't think any of them actually do. That's why I don't like the black boarder. I ordered a Bodyguardz to try
Sent from my SM-G955U1 using Tapatalk
Removing my Whitestone after the curring process and cleaning it was fairly easy. Soaked the glass in 70% isopropyl alcohol for an hour or so. I was easily able to scrape the glue off with my fingernail. Soaked it a bit longer and then used a microfiber clothe soaked in the alcohol to further clean it and get more adhesive off. (all adhesive was removed) Reapplied the screen protector with the 2nd bottle and it went on perfect. YMMV
Do not buy this product
Despite following the instructions to the letter this product did not sit flat on my phone , rather it only stuck in the middle.
I strongly advise to avoid the invisibleshield glass cover for s9+ and wait for something better to come along. Do NOT buy
Zagg is honestly a RIP off. They always lie and use marketing bs. A ton of large youtubers over 1mil subs have proven this multiple times. I'm surprised the community at xda one of the more knowledgable forums out there keep buying it. Not to mention our own GravX doing some good comparisons for us.
Save yourself the $50 and the $15 shipping replacement.
Here is the Klearlook tempered glass. I have provided photos and I will update about the touch sensitivity experience along with if the glass stays onto the display or if it has cracked. In my limited experience, the feeling of the tempered glass does feel different than having no tempered glass. The glass is compatible with the Spigen Rugged Crystal Slim Clear Case. It does appear to be similar or exactly like the Caseology glass since it comes with that installation protector.
Edit: It is a pixel dot matrix screen protector. So far, I haven't noticed any touch sensitivity issues yet but I will continue to update.
Edit 2: Touch sensitivity hasn't been an issue for the past few days so far. I also used pointer option in developer tools and I didn't see any dead spots. Tempered glass hasn't cracked. Oleophobic coating is not good. Tempered glass is very reflective and can make scenarios such as looking at the phone for navigation to be a visual challenge.
Edit 3: It has been a few weeks since I have owned the screen protector. It has not cracked or lifted. I haven't had issues with touch sensitivity (keep in mind I have increase touch sensitivity option on). Seems like a dust magnet. I will continue to use this tempered glass as the positives out weights the negatives. In the end, it protects my phone and it has not got in the way of my touch screen experience.
Edit 4: I dropped my phone at the gym with a case on and part of the top is chipped. The rest of the screen's integrity is in tact. Oleophobic coating is considered decent.
Edit 5: A few months since I have owned the phone and tempered glass. After I dropped it from the gym, I replaced it with a new one. I only have touch screen issues sometimes (typing on keyboard). The tempered glass has not peeled off. It has not randomly cracked. Decent to poor oleophobic coating. You can see the finger prints easily. Not difficult to see when using it as a GPS.
https://www.amazon.com/gp/product/B07B2PV9Q2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
MacShark said:
Here is the Klearlook tempered glass. I have provided photos and I will update about the touch sensitivity experience along with if the glass stays onto the display or if it has cracked. In my limited experience, the feeling of the tempered glass does feel different than having no tempered glass. It appears this is not a pixel dot matrix tempered glass. The glass is compatible with the Spigen Rugged Crystal Slim Clear Case. It does appear to be similar or exactly like the ZAGG glass.
https://www.amazon.com/gp/product/B07B2PV9Q2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Do you hear popping noise or clicking noise when you type with this screen on? It's probably edge adhesive, and not good like the rest. To see the dot matrix, you have to look really careful.