Related
So I had my s7 edge completely naked for a while with just a dbrand skin (stupid, I know). I eventually dropped it and after a horrible two-week process I finally have it back and fixed. I've been looking at cases and screen protectors, but the reviews are so biased it's hard to tell what's good. Currently, I'm looking at a case from "carved" (it's my first post so I can't post their link). They're very stylish but have no bumper over the screen so I will definitely need a screen protector. Obviously, tempered glass is best but there seem to be no good covers in that regard. If anyone has any suggestions I would love to hear what you're using on your s7 edge (both cases and screen protectors)!
I use a stilgut ultra thin flip case, I tried a plain tpu screen protector and i consider myself an expert at installation for those things and the weird corners would pull up and even 1 edge i didnt want any dirt getting under it so i use the flip case that covers the bare screen without protector.
im using this screen protector http://www.ebay.com/itm/Spigen-Curv...851711?hash=item3abf325bbf:g:e8YAAOSwYmZXDYtx and this case http://www.ebay.com/itm/Poetic-Revo...hash=item236daa365b:m:meyHa-dwSsHGbglEUNxCTmA, it doesnt add alot of bulk in my opinion and feels great
Skinomi full body for me, no problem.
Using spigen ultra hybrid case
https://www.amazon.com/gp/aw/d/B01A...tra+hybrid&dpPl=1&dpID=31aCpLMbROL&ref=plSrch
and armorsuit case friendly screen protector
https://www.amazon.com/gp/aw/d/B01A...+armorsuit&dpPl=1&dpID=51WtCcEuicL&ref=plSrch
Several drops about 5 or 6 times mostly on ceramic surface and there is no damage what so ever to the phone nor the case.
I've just come from an S4 to an S7. I'm used to tempered glass protectors, because they're super easy to apply and give the feeling of a premium screen + that added protection. However, I was unable to find a decent tempered glass screen for the edge. The first one didn't fit properly, and left ridges which made the edge panel unpleasant to use. The second one was too thick, and the edges were being caught by my plastic Spigen case. The third felt fragile when applying it and cracked within a few days of just being in my pocket. All of the other ones were basically square and therefore the edges weren't covered at all. I gave up at that point.
I didn't want a PET film screen. I've used them for years, going all the way back to a 5800 XpressMusic, also on my S1 and my Nexus 4, and usually with horrific results. They scratch easily, they lift easily, they never tend to sit right which means you get dust patches in the corners and their light output is usually awful, especially the gloss ones. Give them a few months, and the light output will be unbearable due to the amount of scratches..
Step foward.... TPU Screen Protectors There's a guy selling two for £2.45 on eBay delivered. These things are a bloody revelation to me, I'd never heard of them until I got this phone. I can't believe people are persevering with the tempered glass screens for the Edge. These babies really are the way forward for this phone. The TPU is basically elastic which means it covers the edges perfectly, and it is thin enough not to be caught or interfered with by my case. Supposedly, the TPU is self-healing: basically light and medium scratches effectively disappear thanks to the elasticity of the plastic filling in the gaps, and I can see what they mean. A normal PET Protector for me, would usually be scratched all over by now, yet this TPU protector, you really wouldn't know that it was applied at all. It's completely spotless. No bubbles either which I've only ever achieved with tempered glass protectors. In fact, the only way you can tell this protector is applied at all, is because you can see the pre-cut holes for the camera and sensors at the top. Check out the light output too!!! The only thing that comes close is a tempered glass protector, and I would even go as far as saying this TPU one might even be better!!! (because it has less light reflection)
Tempered glass protectors maybe the hot fashion at the moment, but honestly, I don't think you can go far wrong with the TPU ones for this phone. I am aware that tempered glass protectors give a layer of impact protection too, but that's for you to decide. How many times have you smashed your screen etc? Do you really need that impact protection? If you do, would a standard TPU case be enough, or is the glass protector important....
Edit: @sa3d12 has linked to the case I'm using, the Spigen one.
Thanks all for the recommendations, this has really helped my search
skezza said:
I've just come from an S4 to an S7. I'm used to tempered glass protectors, because they're super easy to apply and give the feeling of a premium screen + that added protection. However, I was unable to find a decent tempered glass screen for the edge. The first one didn't fit properly, and left ridges which made the edge panel unpleasant to use. The second one was too thick, and the edges were being caught by my plastic Spigen case. The third felt fragile when applying it and cracked within a few days of just being in my pocket. All of the other ones were basically square and therefore the edges weren't covered at all. I gave up at that point.
I didn't want a PET film screen. I've used them for years, going all the way back to a 5800 XpressMusic, also on my S1 and my Nexus 4, and usually with horrific results. They scratch easily, they lift easily, they never tend to sit right which means you get dust patches in the corners and their light output is usually awful, especially the gloss ones. Give them a few months, and the light output will be unbearable due to the amount of scratches..
Step foward.... TPU Screen Protectors There's a guy selling two for £2.45 on eBay delivered. These things are a bloody revelation to me, I'd never heard of them until I got this phone. I can't believe people are persevering with the tempered glass screens for the Edge. These babies really are the way forward for this phone. The TPU is basically elastic which means it covers the edges perfectly, and it is thin enough not to be caught or interfered with by my case. Supposedly, the TPU is self-healing: basically light and medium scratches effectively disappear thanks to the elasticity of the plastic filling in the gaps, and I can see what they mean. A normal PET Protector for me, would usually be scratched all over by now, yet this TPU protector, you really wouldn't know that it was applied at all. It's completely spotless. No bubbles either which I've only ever achieved with tempered glass protectors. In fact, the only way you can tell this protector is applied at all, is because you can see the pre-cut holes for the camera and sensors at the top. Check out the light output too!!! The only thing that comes close is a tempered glass protector, and I would even go as far as saying this TPU one might even be better!!! (because it has less light reflection)
Tempered glass protectors maybe the hot fashion at the moment, but honestly, I don't think you can go far wrong with the TPU ones for this phone. I am aware that tempered glass protectors give a layer of impact protection too, but that's for you to decide. How many times have you smashed your screen etc? Do you really need that impact protection? If you do, would a standard TPU case be enough, or is the glass protector important....
Edit: @sa3d12 has linked to the case I'm using, the Spigen one.
Click to expand...
Click to collapse
The process that I went through to get my phone fixed took so long and was so horrible that I REALLY dont want to break it again and I want to make sure I have good protection. The TPU protectors look pretty cool though, and ill look for some!
skezza said:
These things are a bloody revelation to me, I'd never heard of them until I got this phone. I can't believe people are persevering with the tempered glass screens for the Edge. These babies really are the way forward for this phone.
Edit: @sa3d12 has linked to the case I'm using, the Spigen one.
Click to expand...
Click to collapse
I can explain this to you in full.
That's because most of us had used those TPU screen protectors for several years before the tempered glass screen protectors came out and the tempered glass screen protectors are a giant leap forward over TPU/film/wet application style screen protectors. This was before we were forced into curved edge screens. You see, before the large screen devices were basically only the Samsung Note series which all had very large screens that were flat and tempered glass screen protectors were absolutely the best option, especially using the S Pen, the TPU protectors are rubbery and there are indentations and marks left on them that doesn't happen on glass. Additionally if you ever drop your phone on it's screen with the TPU/film type protectors your screen is still trashed. I have personally had multiple phones with tempered glass screen protectors that had the protector shattered but the screen underneath was left pristine. Also the responsiveness and accuracy of the pressure sensitive spen functionality just is horrible with a film type screen protector but is perfect with glass.
With the Note 5, S6 Edge Plus people could still get a 5.5" + screen with the compatibility of a tempered glass screen protector.
Fast forward and suddenly Samsung decided that to get a 5.5-5.7 inch screen you must also get a curved edge screen starting with the S7 Edge/Note 7. So now everyone is looking for the superior look/feel/protection of the tempered glass screen protector and none of the manufacturers seem to be able to produce one that actually fits, adheres correctly and stays put without allowing dust and crap underneath them. None of them work well which is why this and many other threads like it exist. Nobody is debating the superiority of the tempered glass over the TPU screen protectors. Tempered glass is simply better in all regards. The fact you just now suddenly found a TPU screen protector and have fallen in love with it and can't figure out why we haven't all just done that is not a new paradigm. You simply missed out on years of crappy TPU screen protectors to put into perspective just how much better glass is, because getting one to fit properly was never an issue prior to 2016.
Welcome to the past. Don't drop that phone on it's screen. You'll be peeling your TPU screen protector up to reveal a smashed screen and then be like the rest of us......angry that large screen device manufacturers like Samsung have fallen in love with a mostly gimmicky non-functional curved edge screen in exchange for being robust and functionally sound.
neyenlives said:
I can explain this to you in full.
That's because most of us had used those TPU screen protectors for several years before the tempered glass screen protectors came out and the tempered glass screen protectors are a giant leap forward over TPU/film/wet application style screen protectors. This was before we were forced into curved edge screens. You see, before the large screen devices were basically only the Samsung Note series which all had very large screens that were flat and tempered glass screen protectors were absolutely the best option, especially using the S Pen, the TPU protectors are rubbery and there are indentations and marks left on them that doesn't happen on glass. Additionally if you ever drop your phone on it's screen with the TPU/film type protectors your screen is still trashed. I have personally had multiple phones with tempered glass screen protectors that had the protector shattered but the screen underneath was left pristine. Also the responsiveness and accuracy of the pressure sensitive spen functionality just is horrible with a film type screen protector but is perfect with glass.
With the Note 5, S6 Edge Plus people could still get a 5.5" + screen with the compatibility of a tempered glass screen protector.
Fast forward and suddenly Samsung decided that to get a 5.5-5.7 inch screen you must also get a curved edge screen starting with the S7 Edge/Note 7. So now everyone is looking for the superior look/feel/protection of the tempered glass screen protector and none of the manufacturers seem to be able to produce one that actually fits, adheres correctly and stays put without allowing dust and crap underneath them. None of them work well which is why this and many other threads like it exist. Nobody is debating the superiority of the tempered glass over the TPU screen protectors. Tempered glass is simply better in all regards. The fact you just now suddenly found a TPU screen protector and have fallen in love with it and can't figure out why we haven't all just done that is not a new paradigm. You simply missed out on years of crappy TPU screen protectors to put into perspective just how much better glass is, because getting one to fit properly was never an issue prior to 2016.
Welcome to the past. Don't drop that phone on it's screen. You'll be peeling your TPU screen protector up to reveal a smashed screen and then be like the rest of us......angry that large screen device manufacturers like Samsung have fallen in love with a mostly gimmicky non-functional curved edge screen in exchange for being robust and functionally sound.
Click to expand...
Click to collapse
Wow, that's some reply lol. A few things though:
-I think you're asserting that TPU protectors were the norm before Tempered Glass protectors. They weren't, certainly not in my experience. Everyone and their dog were using PET film protectors before tempered glass ones came out. I'd say those who used TPU were probably in the minority really. Tempered Glass protectors are of course the best option, but quite evidently, we're struggling to find ones that actually fit nicely.
-I am very happy with tempered glass protectors that fit, but ultimately, the ones I bought don't. I've settled for a TPU protector because it actually looks nice and feels fine.
-Dropping your phone doesn't always result in a smashed screen. If you've got a case on it, you might be lucky. I dropped my phone many a time with a PET film and it survived. That's the case for you.
Nobody forced you to buy a Samsung Edge phone dude? The standard S7 is not curved and is considered by some to be a better phone than the Edge. Or you could have had an LG G5 or the Pixel phone? Sounds like you're suffering a bit of buyers remorse here. Get an S7 and your glass protector then be happy
@skezza, fast forward 4 1/2 months, and I'm curious how your TPU screen protector is holding up. I just got an S7 Edge, and so I'm in the market for a good screen protector. Right now, Armorsuit's "self healing" TPU protectors are going for under $8, so even if it only lasts a few months, that's not a bad deal.
TIA!
skezza said:
Wow, that's some reply lol. A few things though:
-I think you're asserting that TPU protectors were the norm before Tempered Glass protectors. They weren't, certainly not in my experience. Everyone and their dog were using PET film protectors before tempered glass ones came out. I'd say those who used TPU were probably in the minority really. Tempered Glass protectors are of course the best option, but quite evidently, we're struggling to find ones that actually fit nicely.
-I am very happy with tempered glass protectors that fit, but ultimately, the ones I bought don't. I've settled for a TPU protector because it actually looks nice and feels fine.
-Dropping your phone doesn't always result in a smashed screen. If you've got a case on it, you might be lucky. I dropped my phone many a time with a PET film and it survived. That's the case for you.
Nobody forced you to buy a Samsung Edge phone dude? The standard S7 is not curved and is considered by some to be a better phone than the Edge. Or you could have had an LG G5 or the Pixel phone? Sounds like you're suffering a bit of buyers remorse here. Get an S7 and your glass protector then be happy
Click to expand...
Click to collapse
So just to be clear, you decided to hop on a thread about screen protectors, basically call everyone foolish for wanting impact protection, and then suggest that we get a different phone? What?!?
Most of us chose the S7 edge because of the many hardware advantages over other phones. The curved screen was something we were willing to put up with because the hardware was so great. It's not crazy to want a tempered glass cover (which protects from scratches AND impact) to get full protection for our $500+ phone. If you've figured out a way to ensure your phone never lands on its face, then congratulations.
So, getting "an S7 and your glass protector then be happy" is not a solution. It's an asinine, unhelpful answer that doesn't provide a real solution.
usn.mustanger said:
@skezza, fast forward 4 1/2 months, and I'm curious how your TPU screen protector is holding up. I just got an S7 Edge, and so I'm in the market for a good screen protector. Right now, Armorsuit's "self healing" TPU protectors are going for under $8, so even if it only lasts a few months, that's not a bad deal.
TIA!
Click to expand...
Click to collapse
Very happy. Few more scratches now but worth every penny.
---------- Post added at 09:36 PM ---------- Previous post was at 09:35 PM ----------
gs7ephoneguy said:
So just to be clear, you decided to hop on a thread about screen protectors, basically call everyone foolish for wanting impact protection, and then suggest that we get a different phone? What?!?
Most of us chose the S7 edge because of the many hardware advantages over other phones. The curved screen was something we were willing to put up with because the hardware was so great. It's not crazy to want a tempered glass cover (which protects from scratches AND impact) to get full protection for our $500+ phone. If you've figured out a way to ensure your phone never lands on its face, then congratulations.
So, getting "an S7 and your glass protector then be happy" is not a solution. It's an asinine, unhelpful answer that doesn't provide a real solution.
Click to expand...
Click to collapse
Lol. I think I'll just leave this. You're clearly missing the point.
Just to add, I decided to have a look at my second TPU protector today and found the adhesive was not very sticky anymore. I wonder if these things have a shelf life?
Edit: The old fashioned fairy liquid trick didn't bring it back to life either, although it has reduced some bubbles.
My screen protector I've had on for ages and I use a case by supcase
Sent from my SM-G935F using Tapatalk 2
Tempered glass?
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
twodollars2 said:
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
Click to expand...
Click to collapse
As far as I'm aware, the consensus is that tempered glass protectors with the S7 Edge and the majority of cases simply don't work.
FYI, I've tried quite a few different protectors and cases here in the UK with next to no luck.
Just thought I'd inform you of my experience
So here's what I'm using.
https://www.amazon.com/gp/product/B01MZ02Y2I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
It was easy to install and hardly noticeable.
The screen looses sensitivity and makes texting slightly difficult at times but still tolerable after you get used to it.
I also have an Otterbox Defender. I peeled the annoying screen protector off of that and installed this tempered glass protector then installed the case.
Flawless fit! Don't know anything about Zerolemon cases though.
Nevertheless, I'm very satisified with my tempered glass protector.
Also... perhaps your inquiry would have been better posted here: https://forum.xda-developers.com/s7-edge/accessories/curved-tempered-glass-screen-protector-t3320688
I used the original zagg glass and trimmed a bit off of the zerolemon case at the bottom chin.
It fits fine without modification with the new zagg glass.
I went to the extreme on this case because I been through more screen protectors than I should have. What I did was trim down the inner lip of the case that touches the screen. I used a slightly sharp exacto knife and slightly trimmed away all the hard edges surrounding the phone a little at a time. Doesn't take much trimming to get it to work. Mine looks not all that perfect but now my screen protector is good no problems
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
mine broke once & they even sent me a free replacement too!
grem323 said:
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
Click to expand...
Click to collapse
Here's a review of the GPEL one. It's not a positive one.
"Review of the GPEL Tempered Glass Screen Protector for the Samsung Galaxy S7 Edge"
https://youtu.be/FZxTsYOQdak
i've had this tempered glass for about 2.5 months now. I use it with the samsung leather case & the ringke slim case.
as long as you dont use a case that extends/overlaps over the edges this works beautifully!!
i wouldnt mind buying this again! Highly recommended!
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
the glass reviewed in the above video is gen 1 which i admit did have issues.
they had fixed most gripes with gen 2 since!
Zagg Invisible Shield glass curve for S7 Edge rocks!
mutiny said:
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
Click to expand...
Click to collapse
I ran into the same thing, but I found the Zagg Invisible Shield glass curve for S7 Edge. It is expensive, but it is a bit smaller than the others so most cases don't affect it and work fine. I'm currently using it with the SUPCASE Unicorn Beetle Hybrid case.
So far this is the only curved glass screen protector that works with anything more than a minimal case.
Here's the link to the screen protector:
https://www.zagg.com/us/en_us/invis...xy-s7-edge/glass-curve-samsung-galaxy-s7-edge
and the case:
https://www.amazon.com/SUPCASE-Unic...s=Galaxy+S7+Edge+Case,+SUPCASE+Unicorn+Beetle
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Not the Whitestone then? I was almost about to pull the trigger on getting one for the S9+ but I'm hesitant now.
I've been using Whitestone for myself and my kids, although it has it's fragilities (cold, an snow can alter it) its the best i've tried. I've already ordered mine for the S9+... If i were you get a couple... just in case. As once you've tested it, you won't go back on the side glued ones. You just need to glue it well, and don't be in a hurry.
I've never had issues with touch sensitivity or peeling off (that's even nuts as it's literally glued to the screen, if you break the dome and need to peel it off you should be careful as it's glued it shatters and pieces can jump).
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
I have tried almost 5 brands but still did not get satisfactory result.
Just pre ordered the white stone. It was the best on the note 8.
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
I have used Zagg's Invisible HD shields on all my smartphones. I found them to be durable and compatible with many cases. Including cases for the S7 edge.Installing them is a little complex and you need to get it right the first time in order to avoid bubbles and the edges from lifting. I had to return the one that I installed on my wife's S7 edge once because a corner kept lifting and getting dust under it. All I had to do was return the old one and they send me a new one. Once I installed the replacement correctly, it has stayed on her phone for over a year without any issues. I'm waiting for it to be available in Amazon as they're usually discounted. The Zagg website indicates that they're sold out of their Invisible HD shield for the S9+
tamanaco said:
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
Click to expand...
Click to collapse
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Peanuttree said:
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
Click to expand...
Click to collapse
Will be interested to hear how this full adhesive version stacks up against the LOCA types.
Sent from my SM-G935F using Tapatalk
n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
Thanks for your reply... The complains put "some doubt" in my mind about the protector, I had not concluded that there was something inherently wrong with the OTAO. I posted here because I wanted to hear comments from other folks before I made my decision.
I didn't know that OTAO also made a protector that fully covers the screen, but after you mentioned it... I searched further and also found the OTAO Full Screen Coverage - Double Strong 3D in Amazon. At the same $12 price as the Case Friendly. At this price point, I might get one of each and test them with the case I'm going to use. I'm looking for a slim TPU cases from Spigen, EasyAcc, ESR and Caseologic. Currently, I use a Ringke Slim case with my S7 edge, but given the larger screen size of the S9+; I'd like a more protective setup. What case are you using on your S8 with the OTAO case friendly protector?... Thanks again.
xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Click to expand...
Click to collapse
https://www.zagg.com/us/en_us/invis...protector/glass-curve-elite-samsung-galaxy-s9
optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
xterminater07 said:
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
Click to expand...
Click to collapse
I'm using this one:
EyeO2 Screen Protector for Samsung Galaxy S8 Plus 9H Full Adhesive 3D Curved Tempered Glass Guard High Sensitivity HD Full Cover Edge Protector S8+ Protective Film Replacement Accessories Black 2 Pack https://www.amazon.com/dp/B074QN6ZB5/ref=cm_sw_r_cp_apa_jPHNAbDN9V2VR
And it's good.
Sent from my SM-N910C using Tapatalk
Well I've gambled on the zagg + defender combo, I hope they play nice.....
Will report back......
i've just ordered this can anyone recommend a decent case please.
https://www.amazon.co.uk/Protector-...=merchant-items&ie=UTF8&qid=1520177568&sr=1-3
I just ordered the Zagg. Saved £4 using promo code zagg10 at checkout. £36 felt easier to swallow then £40!
Sent from my SM-G935F using Tapatalk
n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Geekser said:
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Click to expand...
Click to collapse
What version of the OTAO are you using on your Note 8 [Case Friendly] or [Full Screen Coverage]? Are you using the "Updated" version that I believe has "full-adhesive"? Are you also using a case and if so... which one?
xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
I'll be working on a buyers guide today and tomorrow it will be on my channel.. In the mean time I posted a thread about a 10 dollar dome glass copy from the supplying factory and their are a few full adhesive glass protectors I'm tested.. All the others are the same generic ones just like the S8/N8
I'm just jumping from the Moto x4 to S9 Plus
My protector option is one from the ************. I really love to have my S9Plus away from the scratches. As I'm having previous experience with the ************so I'm suggesting to get one from them.
They started shipping but I didn't got mine. Have you bought one from them and received it??
I bought the one from BigBen. Fit perfectly. No problem after 1 week. Just improve screen sensitivity.
I just installed the Whitestone Dome Glass on my S9+. Very easy to install and looks great so far. It doesn't seem to be compatible with the Spigen case I bought though, particularly the lower portion, I'm going to let the glue cure a bit longer and try it again.
UPDATE: I had the dome glass installed just a bit too low on the screen. I removed the glass and adhesive, then reinstalled and made sure the dome glass was correctly centered on the screen. Works great with the case now. Highly recommend this.
Bodyguardz is a more expensive option, but lifetime warrenty. I want to say it's about 10 bucks shipping for the warrenty replacements. I got mine at AT&T when I got my s9 plus yesterday. They installed it for me but it comes with a guide thingy like the Whitestone one.
Hunkman said:
They started shipping but I didn't got mine. Have you bought one from them and received it??
Click to expand...
Click to collapse
Yes, I bought one and even I got the screen protector.
todd3835 said:
Bodyguardz is a more expensive option, but lifetime warrenty. I want to say it's about 10 bucks shipping for the warrenty replacements. I got mine at AT&T when I got my s9 plus yesterday. They installed it for me but it comes with a guide thingy like the Whitestone one.
Click to expand...
Click to collapse
Is that a TGP or Full body screen protector??
xavdep said:
Is that a TGP or Full body screen protector??
Click to expand...
Click to collapse
It's a glass screen protector. Case friendly.
Tried the bodyguards pure arc. Complete garbage. Horrible sensitivity and it's a fingerprint magnet
Sent from my SM-G965U1 using Tapatalk
I just received my spigen 360 thin fit today and this is a pretty good screen protector especially when paired with the case. The touch response is good and I don't feel the need tho enable the setting for screen protector under advanced options.
Sent from my SM-G965U1 using Tapatalk
crzycrkr said:
Tried the bodyguards pure arc. Complete garbage. Horrible sensitivity and it's a fingerprint magnet
Sent from my SM-G965U1 using Tapatalk
Click to expand...
Click to collapse
I bought one too, and concur. Fingerprint magnet, and ruins sensitivity. You have to turn on increase sensitivity in the advanced settings, and still it's a bit wonky.
bkeaver said:
I just received my spigen 360 thin fit today and this is a pretty good screen protector especially when paired with the case. The touch response is good and I don't feel the need tho enable the setting for screen protector under advanced options.
Sent from my SM-G965U1 using Tapatalk
Click to expand...
Click to collapse
I got the Spigen neo flex today and had no issues installing on both of our phones. Seems to fit very well and touch response hasn't changed.
Sent from my SM-G965U using Tapatalk
the verizon branded Tempered flass one is full adhesive. ive been pretty pleased. bumped up sensitivity on phone and no issues at all.
OMYFILM Samsung Galaxy S9 Plus Tempered Glass Screen Protector [Bubble Free] [Case Compatible] 9H Hardness Screen Protector for Samsung S9 Plus (S9 Plus, Black)
https://www.amazon.com/Galaxy-S9-Pl...rotector+for+Samsung+S9+Plus+(S9+Plus,+Black)
Amazon.com link above. $9.00
Got this on Amazon.ca for under $15 CAD, it's curved, applied with zero bubbles and it works really good after raising the screen sensitivity.
Just installed the whitestone dome, I simply couldn't be more impressed. Make sure you watch the installation video a couple of times before applying… but it is hands down the only protector i will be buying from now on for all of my devices.
http://www.amazon.com/Dome-Glass-Protector-Dispersion-Whitestone/dp/B079YF5VS7
Otao case friendly
I got the Otao case friendly version for the S9 Plus from Amazon.com (ASIN: B07BSFLLKY). Rather than give a separate review here, this is what I have added as my review on Amazon. I hope this is allowed.
I had the Otao on my S8 and was very happy with it. On one occasion I dropped my phone. The screen protector cracked, which is what you would expect from a glass screen protector, but it saved the screen of my phone.
I was a bit wary when I read the first reviews of the S9 Plus version (which had a different ASIN number) but then I heard they were updating it. They reached out to me to offer me to try the new one (free of charge) which I just received. The main complaint about the previous version was not enough glue on the edges (it is edge only sticking) but the new version apparently has more glue and it certainly has stuck well on my S9 Plus. Obviously, the proof of the pudding will be it it still sticks well after it has been on a while and I will update my review if it develops a problem.
The installation tray makes it very easy to instal.
I am using it with a Spigen Neo Hybrid case and they fit together very well.
As I said, I did not have to pay for the protector but this review is my honest opinion and, if I did not like it, I would have said so.
Just to add - the packaging recommends turning on the touch sensitivity setting in Settings but so far I haven't found that necessary.
Try this: https://www.amazon.com/Protector【Case-Friendly】Full-Coverage-Tempered-Anti-Scratch/dp/B07B2Y6F9D
dpalmer76 said:
Try this: https://www.amazon.com/Protector【Case-Friendly】Full-Coverage-Tempered-Anti-Scratch/dp/B07B2Y6F9D
Click to expand...
Click to collapse
Does the glue cover entire surface of the screen or only the edges?
I’m looking for one that covers the entire screen most I’ve seen only covers partial off the top and bottom so it still looks like there’s a screen protector. I need fill coverage from top to bottom.
Another vote for the whitestone dome!
I've tried several tempered glass screen protectors since the S6+, and they all suck because the adhesive has trouble sticking to the edges so the sensitivity is terrible. The dome is the first I've used that I'm legitimately happy with.
The installation process is really intimidating at first because the process is different from your typical screen protector. But once you do it once and get the technique down, it's actually pretty fool-proof. The tray basically ensures that the alignment is perfect and adheres well. I happened to screw up the first time because my table wasn't fully level and the adhesive didn't disperse evenly and I got a tiny bubble...so don't take that little detail for granted. Luckily they give you two bottles of adhesive, and when I moved to a level counter and put it on a second time the adhesive spread perfectly on its own and it was really easy.
Bought the Whitestone Dome protector after hearing rave reviews about it. Paired it with the Spigen slim armor in all black, which is probably the most beautiful Spigen case in years.
Unfortunately, after a few hours I notice "spider cracks" forming at the bottom edge, and this morning a couple bubbles at the top edge. Turns out the lips on the slim armor is pushing against the protector ever so slightly. The sides are fine as far as I'm concerned. Just afraid that this is a "plague" that will eventually detatch the screen protector.
Other than that, it's a great screen protector and miles better than the ones I used to try on my s7 edge.
I've ordered the spigen air skin for my s9+ I hope it fits with my phone with my dome protector on.
Get the Spigen 593CS22943 Galaxy S9 Plus Case Neo Hybrid from Amazon. Works fine with the whitestone
welshandy2322 said:
Get the Spigen 593CS22943 Galaxy S9 Plus Case Neo Hybrid from Amazon. Works fine with the whitestone
Click to expand...
Click to collapse
Thanks for the suggestion, but I don't quite like the Neo hybrid series. Prefer something with a hard back. Used an ultra hybrid for my s7 previously but it turned yellow easily. Might consider cutting a little bit of the silicon on the slim armor instead...
I also purchased this whitestone some protector and a spigen air liquid case for a S9 plus.
Didn't applied the screen protector yet.
Now I am afraid of wasted my money with this expensive screen protector...
Enviado do meu SM-G965F através do Tapatalk
I have the Whitestone Dome glass on my Note 8 with the Spigen Armored clear case and it fits just fine. I'm hoping this holds to be true for the S9+ with that same case and glass.... I'll keep you guys posted. I'm thinking it should be fine though...
trenzterra said:
Bought the Whitestone Dome protector after hearing rave reviews about it. Paired it with the Spigen slim armor in all black, which is probably the most beautiful Spigen case in years.
Unfortunately, after a few hours I notice "spider cracks" forming at the bottom edge, and this morning a couple bubbles at the top edge. Turns out the lips on the slim armor is pushing against the protector ever so slightly. The sides are fine as far as I'm concerned. Just afraid that this is a "plague" that will eventually detatch the screen protector.
Other than that, it's a great screen protector and miles better than the ones I used to try on my s7 edge.
Click to expand...
Click to collapse
Hy Friends,
Here is The List !!! of compatibles cases with Whitestone Dome Glass.
https://forum.xda-developers.com/ga...s/case-compatibility-whitestone-dome-t3770259
Maybe help some of you!
Bye