cam i install phoenix DM lastest version on USB3 SSD ,is it possible to install on it?
Related
Hi, ALL!
it is possible to connect in HP iPAQ 914 any Flash Usb Drdive.
It is or is it ?
did you did it ?
what driver ?
what cable ?
Drivers are built in; you just need a mini-USB to female full-sized USB cable
i ask this question, when i connected mini USB to external HDD 2.5" and connect external USB power from my laptop.
My 914 dont recognise my external mass storage device in memory applet. and dont show any warning message or so.
roman_n1 said:
i ask this question, when i connected mini USB to external HDD 2.5" and connect external USB power from my laptop.
My 914 dont recognise my external mass storage device in memory applet. and dont show any warning message or so.
Click to expand...
Click to collapse
perhaps you need a usb host cable
i find 'mini-USB-male to full-sized-female-USB-cable'
but my 914 in memory manager don't show an additional storage (it was standart transcend 512mb flah usb drive)
it is possible to turn in registry or in somewere settings - usb mass storage in this device? that connect standart flash usb drives.
windows mobile may read and write to fat32 or ntfs file systems or both?
Sorry for OT, but I have some problem with this iPAQ. I'm trying to flash this device with the latest ROM using PC with Vista on board. After going to bootloader, installer shows message, that connection between ipaq and PC was lost. Can anyone help me? Perhaps I need some drivers to flash this PDA? When I turn BL mode, and connect to PC, Vista see it as unrecognized usb device...
USB Host
this cable MiniUSB (male) - to USB(female)
price is very low 1.5$
byt my iPAQ 914 not recognise flash usb drive in Settings-System-Memory applet.
hardware is ok. i need additional software - driver for WM6.1.
i try to install USB Host Drivers _http://forum.xda-developers.com/showthread.php?t=480899
no effect - my ipaq recognise nothing: my flash usb drive or my external hdd with additional power or any unknown device.
кому надо - есть подробно про все драйвера по-руски тут
The last wm6.5 Rom contains USB Host driver or NOT? and mini-USB can offer 5V power?
enjoy this GIFT from MOTO.
Just found the USB storage did auto mounted in HKTW 2.3.4 build, under USB HOST mode.
And it did not require any MOTO Dock.
BUT BE CAREFUL the DATA MAY LOST after PLUG-IN, if disk FORMAT UNSUPPORTED.
currently tested,
USB Flash drive: FAT32 is good.
USB Flash drive: exFAT is failed & broke.
USB Flash drive: NTFS is failed.
this still requires the 5vdc and otg cable/ usb hub?
Offcourse it does, it's a hardware limitation, doesn't change with os build. So nothing new here.
Hello guys so here is the issue
None of the usb 3.0 device seems to work In otg mode(all usb 3.0 devices are reverse compatible to usb 2.0) i plugged my 500gb hdd with externa power then a 16 gb usb 3.0 pendrive with no success as soon as the device get recognised i see usb safe to remove notification and then no udisk in explorer.
I seriously need a solution as all my usb devices are usb 3.0
Also when the hardware is capablr of usb 3.0 why did gionee crippled it to usb2.0 only?
dhirajranger said:
Hello guys so here is the issue
None of the usb 3.0 device seems to work In otg mode(all usb 3.0 devices are reverse compatible to usb 2.0) i plugged my 500gb hdd with externa power then a 16 gb usb 3.0 pendrive with no success as soon as the device get recognised i see usb safe to remove notification and then no udisk in explorer.
I seriously need a solution as all my usb devices are usb 3.0
Also when the hardware is capablr of usb 3.0 why did gionee crippled it to usb2.0 only?
Click to expand...
Click to collapse
Usb 3.0 port differs from 2.0 see the usb port of note 3 so it might be a problem to include it....since some HDD consume more power they will not work..ive tried with OTG and a trancend usb 3.0 8gb pendrive and it worked flawlessly
GTARaja said:
Usb 3.0 port differs from 2.0 see the usb port of note 3 so it might be a problem to include it....since some HDD consume more power they will not work..ive tried with OTG and a trancend usb 3.0 8gb pendrive and it worked flawlessly
Click to expand...
Click to collapse
yeah i know the port differs but since the soc is same i think we can solder a usb 3.0 with some tweaking. anyways i provided hdd with esternal power with the help of a cable i modified. also did you tried any 16gb pendrive? i think size may have been a problem too?
also pls can you try an external hddso that i woud be certain that this is not a issue with my phone only. thanks in advance
anybody else getting same issue? (notification saying usb safe to remove..)
dhirajranger said:
yeah i know the port differs but since the soc is same i think we can solder a usb 3.0 with some tweaking. anyways i provided hdd with esternal power with the help of a cable i modified. also did you tried any 16gb pendrive? i think size may have been a problem too?
also pls can you try an external hddso that i woud be certain that this is not a issue with my phone only. thanks in advance
anybody else getting same issue? (notification saying usb safe to remove..)
Click to expand...
Click to collapse
All you have to do is install Paragon NTFS & HFS+ on your phone & grant it superuser permission. Now use ES File Explorer to go to the /mount directory & you will find your hard disk partition there.
Sometimes you may get an error while trying to access the files in the secondary partitions. For this issue you will have to manually unmount those partitions in Paragon app and mount them to a location of your choice.
Hope this helps.
Hubriss said:
All you have to do is install Paragon NTFS & HFS+ on your phone & grant it superuser permission. Now use ES File Explorer to go to the /mount directory & you will find your hard disk partition there.
Sometimes you may get an error while trying to access the files in the secondary partitions. For this issue you will have to manually unmount those partitions in Paragon app and mount them to a location of your choice.
Hope this helps.
Click to expand...
Click to collapse
thanks bro it worked like charm.
Hi all,
can you guys tell me how to detect ntfs hdd with usb otg on official kitkat rom?bcoz i stored all my data on ntfs hdd which i cant reformat to exfat
before i upgraded to kitkat, i flash the adam kernel then install a software called paragon. then it works
as you know adam kernel did not support kitkat. so, is there any other way?without adam kernel, the paragon software did not detect ntfs
ah yes, i really would like to stick with the official rom for the mean time...so there's no chance i'd flash a third party rom
thanks in advance for the help.....:laugh:
I'm planning to learn on how to boot windows 8.1 or 10 from my usb flah drive. To all those that has, are there any differences in speed if I were to use a usb flash drive 2.0 or 3.0? Will one of them boot faster and have smoother navigation of the os?
Thank you