Please check THIS thread for new versions!!!
This is my first work on Lenovo K910.
This 1st Rom doesn't have as many tweaks as i usually do on my previous works (Sony X10 & Samsung S3).
Check post 2 for major tweaks.
Important
Make sure that you use TWRP for this. I didn't try on any other recovery.
Go here if you don't have it and follow the step-by-step guide.
This rom is for K910 only so if you try to install on any other than K910 version it's your resposability (i.e. K910e, etc)
What to Expect From this?
Based on VIBEUI_V2.0_1437
Deodexed
Clean many apps as possible [check 2nd post if you want something back] - Only 482Mb!!!
Faster
Slightly tweaked build.prop file
English as default
Do not expect Multi Language for two reasons. 1st: VibeUI came out in in short periods. 2nd: Don't have time and/or patience.
To Do List
Make system faster
Change Kernel to support init files
OTA Updates
Super tweaked build.prop file
????
Step-by-Step Install procedure
Do a backup
On TWRP Wipe > Factory Reset
Through TWRP install VIBEUI_V2.0_1437_deodexed.zip
Wipe Cache & Dalvik Cache
Reboot
At this moment you have a very clean and stable rom. Now check 2nd post to build our own personal rom. Enjoy :good:
Mirrors
Android File Host
Bugs
When you finish the install procedure, you'll find some files related to system apps left behind on your launcher. You could delete them by long press
Due many system apps have been deleted and mostly KK had some bugs (i.e. check here) Play Google may cause you a bit a work.
Usefull Links
Check post #5 for usefull links where you could send me your opinions, bugs, review, requests, etc
XDA:DevDB Information
Lenovo K910 Rom + Cleaner Patch, ROM for the Android General
Contributors
Crowds
ROM OS Version: 4.4.x KitKat
Based On: VibeUI2.0
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-10-01
Created 2014-10-01
Last Updated 2014-10-01
Build Your Own Version of Lenovo K910 Rom
Here i offer you a tool to build your own rom as you like.
In the future i'll add more stuff but for now you only have the option to install some of the Lenovo apps that you might need along with a short list of usefull aps.
This uses Aroma Installer witch is a very simple yet powerfull way to install something on android phones.
Please read carefully through all the proccess. Despite this won't do any arm on your phone you may ended with duplicated and deleted files that you might need. For example if you delete Lenovo installer and don't install another one you can't do nothing.
Removed apps that could be installed:
Data Folder
Baidu Map
Baidu Music
Baidu Search
Dianping
GaodeNavi
Lakala
Lenovo Phone Msr
Mobile QQ
Reading Joy
Sina Weather
Sina Weibo
Sohu News
Sohu TV
Tmall
Track Ax
UC Browser
Es File Explorer
GMS Tools
Lenovo Calendar
Lenovo Camera
Lenovo IdeaFriend
Lenovo Music
Xposed Auto Correct Always Module
Yandex Browser
Vibe Expert
Xposed
System Folder
AntHalService
AnyShare
BasicDreams
Holo Spiral Wallpaper
Idea Wallpaper
Lenovo Arkanoid
Lenovo Arkanoid Bubble2
Lenovo Browser
Lenovo Service
Live Wallpapers
Live Wallpapers Picker
Magic Smoke Wallpapers
One Key Lock
Pinyin IME
Secret Code
Sogou Input
More System Apps
AppStore
Car
CarAppActivity
FileBrowser
GameWorld_Phone
Lenovo Email
LenovoExchange
Lenovo Music
Lenovo Sync
Lenovo Theme Center
Youyue
Step-by-Step Guide
Enter in TWRP
Install
Choose VIBEUI_V2.0_1437_Config_File
Follow the promps
Check Clear Dalvik Cache after installation
Reboot
Enjoy
Download File
VIBEUI_V2.0_1437_Config_File [version1.0]
Mirror
A huge thanks @Nikhil for his tool
[Reserved Again]
Usefull Links
In order to deliver a better rom in the future you may visit the following links and leave your thoughts.
Thank you
Crowds
Downloads Repository
Review
Requests
Bug Report
More than 400 dw and nothing?!
This k910 community is asleep or something?!
Does this ROM support Google Voice direct dialing?
Thanks much for your work. I would like to give this a try. Before doing so, I have a quick question - does it support Google Voice direct dialing? I mean, after installing the Google Voice app and choose the option "Use Google Voice to make all calls," will a call then be dialed out using Google Voice?
I ask this question because Lenovo must have done something to break this desired behavior. What happens on the Lenovo official ROM is: an error message of "call not sent" is displayed, and the native dialer keeps dialing out, so the receiving party will see the phone number associated with the SIM card, but not the Google Voice number.
wxppro said:
Thanks much for your work. I would like to give this a try. Before doing so, I have a quick question - does it support Google Voice direct dialing? I mean, after installing the Google Voice app and choose the option "Use Google Voice to make all calls," will a call then be dialed out using Google Voice?
I ask this question because Lenovo must have done something to break this desired behavior. What happens on the Lenovo official ROM is: an error message of "call not sent" is displayed, and the native dialer keeps dialing out, so the receiving party will see the phone number associated with the SIM card, but not the Google Voice number.
Click to expand...
Click to collapse
@wxppro
I'm sure that issue still remain in this version since i didn't change anything related with that.
That's s.th i don't use so...
If you try this rom and if that bug is present please report on "bug report" and i'll look into that in the next version
So does this ROM come with google services and root or do I need to install those after flashing the ROM?
This one is w/o both but tomorrow will be available a new version
Crowds said:
This one is w/o both but tomorrow will be available a new version
Click to expand...
Click to collapse
Please keep on update clean version.
This is the fastest and longest battery life for my K910.
My current config which is very stable is...
i install this version plus lenovo theme center from AROMA (need it for disable annoying bubble lockscreen)
i use Titanium backup to uninstall LeNote and Lenovo calendar.
i apply GPS patch from Tedulus.
i tried 2.5.1 but i believe that DPI config drain battery and i prefer to have stock font than custom font from author.
New version available today
Please check THIS thread for new versions!!!
This thread will be closed.
Thank you!
Crowds
All developments are carried out thanks to donations on Purchase of these or other devices
thank
Please do not copy files to other file shares
the project is under constant development and refinement
Project name [ROM] Moto X L!te FW LPA23.12-15.5.EU.ML
Tagline Faster Lighter Economical
for XT1052/1053/1058 - 2G/3G/LTE
and only GSM XT1049/1050/1056/1060/ - 2G/3G/LTE (for CDMA use menu *#*#4636#*#*)
SYSTEM Firmware LPA23.12-15.5.EU.ML Multilingual
- firmware Deodex - allowing resources using modifiers such GravityBox apply all when firmware odex, it sometimes limited customization or going awry
- Launcher -4*5, no searche bar
- tzdata 2015f
- icudt53l last
- return "the gesture of the Jedi" (after installing the firmware of the old sensor /*** it does not threaten the phone)
- delete more apps FaceLock, MotoServices, Google Drive & Docs, Permissions and etc
- replaced by sound WirelessChargingStarted
- uppdate apps LatinIME, Migrate, Calendar, AudioMonitor, Moto, MotCamera, MotGallery
- Stagefright Fix
- removed a lot of the background services collect and send data on the type of phone DropBox, MotoCare, MotoConntect, Drive, FaceLock ... etc.
- add apps VendorApp ESFileManager, CCleaner
- added Russian, Ukrainian language
for Unloked Device
Install for Custom Recovery
Root not PreInstalled
Download there https://yadi.sk/d/jp8ykQqFindY8/MotoX/5.1.0
for Loked Device
5.1.0 for locked phones ready to be sewn LONG !!! 5.1.0 1.5 GB used by all, no matter what the new system weighs only 900MB ... the old system to be erased
Install for QDLoad9008
Root, BusyBox is PreInstalled
- Root SuperSU v2.46
- BusyBox v1.32.2
DISCLAIMER
Author is not responsible for totally bricked devices, broken arms, legs, plane crashes and your wife's cheating.
All actions taken is your own risk.
Instructions to install
You:
- shouldn't be afraid of Qualcomm HS-USB QDLoader 9008;
- do not change any files, pathes;
- can install drivers manually;
- need to install python-2.7.9 and pyserial-2.7.win32;
- unzipp _Rus_5_1_0_LPA23_12.XX.7_BL_V30.BE.rar to Cython27;
Method is dangerous, however gives results.
you must have firmware SU6-7 receiving is not in the form of an update (OTA) and stitched through the RSD Lite.
00 Flash *******_5.1.0-LPA23.12-XX.7_CFC.xml firmware
01 Unzipp everything to Cython27.
02 Run BLBROKE.bat.
03 After you got Qualcomm HS-USB QDLoader 9008, install drivers manually
04 Run RUN_Rus_Part**.bat. Parts 250 of system.
*** You can also run a file if you are sure that your phone can work 6-7 hours with the screen RUN_Rus_***_Full.bat
then repeat this step X times (the number of times equal to 6)
while (found next part) do
***
>> fastboot to hold 10 minutes that would have been charged a little phone
>> Run BLBROKE.bat.
>> Run RUN_Rus_***_Part**.bat. Parts 250 of system.
***
end
99 Turn device on. Now you have SU DEODEX PreRooted
Drivers, Soft there -> https://yadi.sk/d/p458Cy0XineRC
Scripts, ROM there -> https://yadi.sk/d/kxbxpTnziSg35/Moto X/5.1.0
Please do not copy files to other file shares
the project is under constant development and refinement
XDA:DevDB Information
[ROM] Moto X L!te FW LPA23.12-15.5.EU.ML, ROM for the Moto X
Contributors
CrashXXL
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Android 5.1.0 LPA23.12-15.5
Version Information
Status: Stable
Current Stable Version: 1.00
Stable Release Date: 2015-10-19
Current Beta Version: 0.01
Beta Release Date: 2015-09-28
Created 2015-10-12
Last Updated 2015-10-21
So can I assume this is a stock based rom that has been debloated, optimized, and such but is fully functional as a stock Rom? I've been waiting to update the wife's X on account of all the reported troubles with the official lollipop update.
This firmware is the most clean and fast
It based on the stock, and includes all updates and patches
Hi!
First of all, thank you very much for your rom, the "jedi" gesture is back!
I checked the stagefright detector and it seems to be vulnereble to the "CVE-2015-6602" I asume is a new vulnerability and motorola haven´t patched yet.
I have installed the rom an hour ago and everything works as expected, so nothing else to report, if I find anything strange i will tell you.
Thanks again!
Iktor said:
Hi!
First of all, thank you very much for your rom, the "jedi" gesture is back!
I checked the stagefright detector and it seems to be vulnereble to the "CVE-2015-6602" I asume is a new vulnerability and motorola haven´t patched yet.
I have installed the rom an hour ago and everything works as expected, so nothing else to report, if I find anything strange i will tell you.
Thanks again!
Click to expand...
Click to collapse
stagefright was fixed in last update, so I would certainly expect this ROM to have that patch. also, I believe that this thread should be moved to the Development section, not in general. you may need a mod to help out.
"and only GSM XT1049/1050/1056/1060/ - 2G/3G/LTE (for CDMA use menu *#*#4636#*#*)"
So this could work on the Sprint network with a 1056?
please link to another server
Enviado desde mi Moto X mediante Tapatalk
May I know how often will you update?
What about the very serious glitch-bug on YouTube ? Is it fixed ?
Sent from my XT1052 using Tapatalk
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
YES 1056 will work
Xposed?
wildblade64 said:
Xposed?
Click to expand...
Click to collapse
http://forum.xda-developers.com/xposed
CrashXXL said:
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
Click to expand...
Click to collapse
Thank you for reply.
jco23 said:
stagefright was fixed in last update, so I would certainly expect this ROM to have that patch. also, I believe that this thread should be moved to the Development section, not in general. you may need a mod to help out.
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x/general/ota-xt1052-firmware-update-5-1-10-10-t3221898
Above thread has screenshots of XT1052 with update and shows that the above vulnerability is not fixed yet. It's the only one thats not fixed.
---------- Post added at 07:05 PM ---------- Previous post was at 07:02 PM ----------
CrashXXL said:
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
Click to expand...
Click to collapse
I'm sorry... I dont understand... Do these apps not work right now???
I want to try this ROM to get back to stock... I do not have a system to flash the stock files...
Please help me understand.
XT1049 on C Spire?
Do you think this ROM will work on XT1049 from C Spire? I also would like to use a stock based ROM.
I do not change third-party applications, such as YouTube, Chrome, and other Google search, wait for the update application from the developers (Google)
Sorry, I meant to say if this rom will have xposed built in. Thank you so much crash by the way, I'm assuming this will eventually work for xt1058 with locked bootloaders?
what is that?
the gesture of the Jedi
what is that?
On kitkat you could have your hand in front of the screen and it would display moto display, since the lolipop update, you have to hold your hand directly over the light sensor for a few seconds.
I have a Galaxy S4 I9505 JFTEXX with the newest 13 Caynogenmod rom installed. When I use the phone application, I have no sound. The recipient does not hear me and I don t hear the other person. When i make an outgoing call and I put the phone on speaker after the connection is made then it works most of the time.. All my other phone audio like Calls over Skype, whatsapp etc. do work! When i do a complete clean install of the original firmware (Lollipop) then the sound does work. So It is not a hardware problem but seems a custom rom/Caynogenmod problem.
The following solutions I tried but unfortunately offer NO solution so far:
- Device fully wipe + clean install lollipop + clean install Caynogenmod
- Clean install Caynogenmod using TWRP
- Install Sound About app
- Checkinservices Google play services off
I read on the internet that the problem is more common when installing a custom rom.
My phone information:
- Installed: CyanogenMod 13.0-20160506-nightly-jftexx + Open GApps Arm 6.0 nano 20,160,505 + sUPERsU-v2.65-20151226141550
- Bootloader version: I9505XXUPOL1
- Baseband version: I9505XXUPOL1
- Build number: cm_jftexx-user debug 6.0.1 MOB30J96143656e2 test-keys
- Buid fingerprint: Samsung / jftexx / jfte 5.0.1 / LRX22C / I9505XXUHOB7 user / release-keys
I don t know much of bootloaders and basebands but I see that the one on my phone is for android Lollipop and not forMarshmallow. Is this correct or should I update it?
Who knows a solution for my problem? Thank you for your replies!
Same problem here!
I installed cm-13.0-20160703-NIGHTLY-jfltexx-recovery.img and after that I lost audio on calls (mic and speakers). The call connects but I can't hear anything and the person also doesn't hear me, just a terrible screeching sound.
I even installed the stock firmware but to no avail.
Any solutions?
Thanks!
Hello,
I'm trying to allow installing apks on the system not from the google play store. (3rd party apps)
Tried so many passwords but nothing works.
details about the head unit I own:
Processor: Quadcore - T3
Android version: 6.0.1
MCU version: T5.3.19-11-00-453101-190624
System version: V8.2.3_20190615.103055_KED18-0395-i145
Hope someone could help me here.
Try 3234
nolimitzr2 said:
Try 3234
Click to expand...
Click to collapse
No, not working. But thanks.
i have car head unit
junsun v1 pro?? 4G
8259 model
ON MY PEUGEOT 207 MY:2007
with
***** serial number: 0123456789ABCDEF
***** firmware installed:
"full_825X_Pro-Octa 10 PPR1.180610.011 eng.root.20200426.093427 userdebug"
***** version build : android-trunk-p0.825X_Pro
***** HMI: JC.G5.D.Q.F.02.2021.08.06.11.00
***** MCU: TS-G5.200710(H)
***** MEDIA: HC_v2.0.0_210706_1130 (v1.83)
***** BTV: BT.21.08.02.1945(02:00:92:88:68:76)
PLEASE HELP ME I NEED :
1) The user manual
2) Installation manual
3) To update the firmware please give me the link to the right firmware for my device
PLEASE SENT MESSAGES AND TO MY email:
[email protected]
many thanks to anyone………………..
Junsun V1 Pro (MTK8259/MTK8257) - firmware
Latest version for Junsun V1 Pro MTK825X 8259P_军灿UI02v1280x720-国外_v81_20230427.zip https://drive.google.com/file/d/1Lq...w?spm=a2g0s.imconversation.0.0.17193e5fMj95EA
forum.xda-developers.com
hi to all. I've installed the newest soft from first page of this thread. But now i can't see a dvr app in system. Is there a way to download an original app?
And one more. On the newest update, there's a Netflix app, but i can't run it.
marioti said:
hi to all. I've installed the newest soft from first page of this thread. But now i can't see a dvr app in system. Is there a way to download an original app?
And one more. On the newest update, there's a Netflix app, but i can't run it.
Click to expand...
Click to collapse
In factory settings (code 8878) you may find your required software in submenu "Menu icon".