Hello friends. Is there a way of installing uvc driver for our phones so that it can be used for fpv. The otg does work with memory sticks and all but cannot recognize the connected video receiver. It says I have to install the uvc driver. I tried and failed. Any help?
Related
Hello,
Can anyone help me with a description of the USB OTG functionality on the ZTE Blade ?
I am interested in:
What drivers are installed (USB Host, USB Gadget, USB Storage, etc.) that are related to USB OTG functionality.
How the phone recognizes if it should be in USB Host or USB Gadget mode (sense pin or software switch?)
How the automount works.
What kinds of devices can be connected to the phone.
Any other things that could help implementing USB Host into another phone (Optimus One)
I am trying to help get USB host working in the LG Optimus One, which has similar hardware, but OTG is not working at the moment.
Any help would be appreciated.
The thread (at it's beginning, at thr moment is here), for direct input.
I need to use usb microscope (which use general linux UVC driver on my natty ubuntu) on a500 to capture magnified image for my daily work.
However, I couldn't get it to work in every possible camera app that I could try. (After i plugged in then dmesg, it shows that UVC 1.0 device USB2.0 camera (1871:7670) found.)
After reading on many forum for a week, i have been convinced that I should try compiling my own driver first. It should work fine with default android camera app. The only place I that seems to be able to use external usb camera on their device is advent vega at Modaco.
I also found a good step by step in building UVC driver module for arm based device such as android here. But I have very limited linux knowledge so I couldn't apply it to my need.
Can someone please enlighten me by providing steps for a complete noob, like me to be able to build my own driver?
Information on the UVC driver sources can be found here at linuxtv.org.
I'm currently using richardtrip kernel which can be found here.
I would also be interested in a UVC driver for android!
hello guys. i really need to add a USB bluetooth dongle on my device... if i run USB host daignostics, it says all is ok. but when i connect my usb dongle( VIA OTG) , nothing really happens... is there any way to install drivers??? or does anyone know a good tutorial, to activate bluetooth support??
for the record, the "USB host veiwer" app, finds my bluetooth device...
the USB host controller app says "s3c USB host driver not found"
Hello
I've made an Android application that takes some measurements from custom made device. We decide to use FTDI chip for usb serial converter. The application works fine and communicate with attached device. But on some phones/tablets it doesn't work in sense that Android device does not recognize attached device over OTG. I made tests from version 4.0.4 to 4.1.2 with different device so I think that it is not problem in OS.
Is there any way how to detect if phone or tablet can recognize and establish communication with device based on FTDI?
Hello,
I have an Easycap video capture device that I would like to get working on my S5. I'm running CM12, and from what I can tell, there is a kernel module for the Easycap with USB ID 05e1:0408, but not for my variant.
I did find what appears to be a linux driver for the Somagic variant, though. Can this be used on android? Are there other options for getting the kernel module to work for my variant?
Thanks!