I'm having a problem with Netflix and the HDMI output of transformer that I'm wondering if anyone else has seen and fixed. Netflix seems to work pretty well on the tablet (some lag/stutter, but nothing unbearable). HDMI output seems to work pretty well to the TV. But, when I combine the two, the result is less good.
While playing netflix video, I get occasional bursts of what is like static. Lines, or blocks on the TV. They aren't there on the transformer, only on the TV. However, if I use splashtop to connect to my desktop and then stream netflix from my desktop though the tablet to the TV, everything is okay.
I haven't really probed other video sources to see if other videos than netflix work directly, but none of the other apps that I've put on the TV cause the same static-like issue.
Any ideas?
Have you tried another HDMI cable? Maybe Netflix is outputing 1080p not 720p and it's causing problems with your cable or sth?
I have updated from FIRE OS 3 to FIRE OS 5 Preview.
After the update audio passthrough in Kodi 15.1 (using optical out) isn't working anymore (It was working fine on FIRE OS 3). When I switch on passthrough I get a hissing/cracking sound.
Anyone else experiencing the same issue?
Does it also occur when using HDMI out? (I can't test it because I have no HDMI in on my receiver)
Same problem here with HDMI. Tried Dolby Digital and DTS both get very loud white noise.
Same here with new Fire TV 4k Also Plex didnt use DTS or DD, Plex show DTS as audio format at playing but it play only PCM.
Just thought I 'd give my details, pretty much same issues as above
Tried - Kodi - 15.1 , 15.2r3 , 16.0a
with
Onkyo tx-nr509
Fire TV 2 (4K)
FTV -> TX-NR509 -> TV all via HDMI
I have switched from ATV where i was using using optical and everything was working fine. FireTV only has HDMI tho.
Tried all combinations of settings and all I get when I enable Dolby Digital (AC3) Transcoding is digital static as if Kodi/Android/Linux is failing to tell the amp to switch from PCM. Frustratingly I did have this working once, no idea what I did, tried everything mentioned in this thread.
Fire TV Prime videos are working flawlessly.
For me the current (annoying) workaround is to play the movie, hear the static, press stop, and play it again. it's worked every time for me so far.
HDMI -> mostly decent Denon here
xenoglyph said:
For me the current (annoying) workaround is to play the movie, hear the static, press stop, and play it again. it's worked every time for me so far.
HDMI -> mostly decent Denon here
Click to expand...
Click to collapse
which settings do u use on fire tv 2 and your denon? (got an denon avr 2113)
maybe i missed sth on my denon settings
(installation: fire tv 2 -> input media player (hdmi) denon -> monitor out (hdmi) -> tv)
jackiie said:
which settings do u use on fire tv 2 and your denon? (got an denon avr 2113)
maybe i missed sth on my denon settings
(installation: fire tv 2 -> input media player (hdmi) denon -> monitor out (hdmi) -> tv)
Click to expand...
Click to collapse
same hardware setup for me. in ftv system settings i have it set to dolby digital plus or whatever their pass thru setting is called. and afaik in kodi when it comes to audio the settings don't really matter when you've got pass thru enabled.
Just thought I'd link the following for anyone having the same issues as me with the AFTV. It looks like a fix for DolbyDigital+ was released to fix issues within NETFLIX and PLEX on the AFTV device itself. Amazon are saying a fix will be rolled out on the 30th November for the older Dolby Digital and some are suggesting this should deal with the issues with KODI pass-through - fingers crossed.
http : // www . aftvnews . com / software-update-with-surround-sound-fix-begins-rolling-out-for-2nd-gen-fire-tv /
xenoglyph said:
same hardware setup for me. in ftv system settings i have it set to dolby digital plus or whatever their pass thru setting is called. and afaik in kodi when it comes to audio the settings don't really matter when you've got pass thru enabled.
Click to expand...
Click to collapse
weird. maybe i missed sth. use the same settings but still some stupid noise. do u stream your movies? do u use mkv as well? can u send me some screenshots? when i disable pass through in kodi it just show multi in at my denon...
KODI no audio
I have KODI working until FTV2 firmware 5.0.4. KODI no audio 15.2/16 with red mute button on the top right corner
no way to turned on. Tried wukong remote, adjust amplification, change setting in FTV and kodi. Audio is gone forever.
KODI with 5.0.4 works on my FTV2. But I get only DD passthrough. DTS only white noise with my DENON AVR-X1200W. On PCM Output, channels are switched and need to be remapped. I dindn´t found any way in google to remap hdmi channels on android maybe somebody here is able to do some hacking on the ALSA Interface since we have root.
It also doesn´t look like, that the KODI developers have much interest to fix anything in kodi on FTV2 plattform Most development goes in direction of Nvidia Shield.
For thouse who are using Instant Video it´s absolutely dissapointing since most movies i watch via Kodi are with DTS sound. I have to watch them in Stereo PCM. That sucks! Nvidia Shiled is absolutely useless for me.
@woodybarry
try to do a factory reset and do a clean kodi install, without restoring anything.
bigwillie1 said:
I have updated from FIRE OS 3 to FIRE OS 5 Preview.
After the update audio passthrough in Kodi 15.1 (using optical out) isn't working anymore (It was working fine on FIRE OS 3). When I switch on passthrough I get a hissing/cracking sound.
Anyone else experiencing the same issue?
Does it also occur when using HDMI out? (I can't test it because I have no HDMI in on my receiver)
Click to expand...
Click to collapse
Had the same issue here.
With Fire OS 3 is use the automatic option, enable passthrough in Kodi (at the moment 16.1) and my Teufel Concept E-Digital did recognize DTS or AC3. With the update to Fire OS 5 I lost this feature
I try all options in FireTV OS 5 settings, with enabled or disabled passthrough option.
I've read something about to try:
-SPMC (because of a better Android support)
-kodi 17 beta (because of some passthrough fixxes)
I search for a method to enable the old Fire OS 3 settings for audio in Fire OS 5! Any ideas? Is it just a another lib/module to replace? @aftvnews
Elias, did you have any ideas?
If I dont find a solution I will sell my AFTV1 box...
Greetings by Idijt
Factory reset of AFTV worked for me. Make sure to back up Kodi config before and liars before wiping.
Hey.
Was wondering if it is possible to use an externa OTG usb camera for videocalls and if so how to acomplish it?
I am able to connect it to the phone and use it in some 3rd party recording apps, but can't seem to find a way to set it as primary camera so it can get picked up by whatsapp
Any ideas? I need to be able to start and stop video recording on my lg v20. I am getting soft quality video from the front facing camera so i need to use the primary camera.
I have a hdmi lcd panel and slimport to hdmi on the way but now i wont be able to see and use the phones touch panel any longer.
So i need a way to start and stop video recording.
Ideally be able to switch between wide and narrow sensors as well but lacking that is ok.
I found a bt remote on amazon with dedicated photo and video buttons but it does not work. Only for photos not video.
Suggestions?
Teamviewer or something similar? Wireless mouse?
Screen sharing would be perfect but 3rd party software Solutions are horrible with way too much lag to be useful I already tried wireless mouse doesn't work because there's no way to see the screen to know what I'm clicking on unless... The wireless mouse cursor shows up in the HDMI screen then that might work a little cumbersome but it might work can I plug a USB C Hub and still use the slimport HDMI out? Although I could use a Bluetooth mouse... I will have to try that
Hi, I'm trying to figure out a way to use my zf6 as a media player for movies and netflix. I'm on a data plan so I need to have my media saved on it and play them through the phone to my tv using an hdmi connection. I understand it lacks the 3.1 usb c video output feature, but I found out there may be workarounds for that using an usb c to hdmi adapter, a displaylink device or even some third party apps like taskbar 6. Anyone had any luck in making it work and care to share how that happened?