Related
I posted a while ago about this with no response. I'd really appreciate some kind of input or advice or anything.
There are those of us who don't like screen protectors on our imates. Of course, after a year, this leads to those little, annoying scratches that seem to magically appear. There's stuff on the market to rub these out; one such product is Displex. I'd like to know if anyone has any experience with these products or any other methods of removing these tiny scratches.
If you haven't had a response in a year, I'd imagine that is because most people like the anti-glare and improved writing surface that a screen protector offers <shrug>
I know those scratches you're talking about but the first thing I do is to get a film for my new device to keep up the resale value.
I know this is a personal preference, but what do you have against films? I can't actually think of a downside to them apart from the first two attempts where you get dust under them and it annoys you for a week before you calm down enough to try it again =)
Maybe you could try one of these polishes and tell us how good they are, after all this information seems to be somewhat lacking ... ?
Amen to that. Actually the good brands (though a bit more expensive) of screen protectors are so easy to apply. I bought a couple of the ultra clear ones from Brando and i'm still on my first for close to a year now. Every now and then I clean the film with rubbing alcohol.
Since I own a few Swatch watches and most of them have already scratched plastic faces, I bought the little tube of scratch remover. It gets the job done but a lot of pressure is required especially if the scratch is very deep. Since my hands got very tired, I then used a Dremel. Word of advise, don't set the Dremel at a high speed because it will melt the plastic.
I don't know if the Magician's screen has some sort of anti-glare coating. When I tried to remove the scratches on my older pair of eye glasses, the anti-glare coating was taken off wether rubbing it manually or using the Dremel.
i've had only bad experiences with screen protectors. I guess that's what i get for being a cheap ass. Plus the jam is my first pda, so i never really realized how much of a problem those scratches really are.
I suppose the solution is to try the Displex screen scratch remover and then slap on a Writeshield AG. Thanks anyway.
I suggest you try first a very small area in a corner of the screen just in case the scratch remover will a a greater damage.
Good luck. Hope you do get your screen as good as new.
zerimar said:
I suggest you try first a very small area in a corner of the screen just in case the scratch remover will a a greater damage.
Good luck. Hope you do get your screen as good as new.
Click to expand...
Click to collapse
Absolutely. I once used scratch remover on my old XDA (Wallaby) and found it to be efective in removing the scratches. Problem - in the area where i removed the scratches the display was compromised - it looked like a prisma of kinds, kinda like when you little drops of liquid on an cathode ray tv - you could see little bits of red green and blue.
I think some kind of layer was removed causing this. So really try it on a corner before you go for the entire screen.
And another word, if you are not familiar with using a Dremel, NEVER use it for cleaning or polishing of plexiglass. I ruined a swatch with that. Used it even at a low speed, but the polishing wheel made the plexi so hot the watchglass actually looked like a bumpy road. Had it professionally repolished at a jewelers place, but by doing this the plexi had got so thin that i broke after a while...
Dremel and plexi - no good in my opinion.
i have a few scratches that came with my magician (i didnt pay a cent for the scratches ). let us know how you go.
BTW, has any one used car polisher for such a task? I heard (not sure how correct/accurate), that its possible to remove small scratchs from cds wih car polisher? I wonder if it works for lcds.
now how is man enough to try it out in there magicians hay :lol: :lol:
Hello,
i want to change my Ameo in a new one because there are a lot of scratches on the front body. The reason is that the keyboard slipping on the surface of the body.
If any one have the same problem please Post it here because i want to show T- Mobile that this is a failure of construction.
Mine is exactly the same, I tried to take a picture, but it wasnt comming out very well, I was quite annoyed because I tried to keep it good. Does anybody know if this happens with the black ones or is it just silver. mine isnt insured and T-Mobile wouldnt entertain me for insurance because it was 3 months old. though I have heard you can insure it online somewhere.
i've got the same kind of scratches at exactly the same positions.
but i don't think t-mobile will do anything about this
i'ts a normal sign of use
I have some scratches as well, fairly similar to yours. I'll have some pics made if I can get a hold of a good enough camera.
I have a scratch at the bottom of the screen surround. The keyboard clear top has a tiny bump on it (from where it was moulded i think) and this has scratched the case! If it had a decent leather case then it wouldnt happen!
Same here, Same scratches, same area..
Guess we need to find a decent case to carry our precious around in...
Something that has some padding between the 2 parts.
Mine doesn't have this problem. Not a single scratch at all. It still look brand new. I don't use the keyboard or the leather case though. I just carry mine "naked" with my DIY belt pouch. I just have the standard free plastic screen protector over the screen area only and not the body.
This is ironic. The keyboard is supposed to protect but does the opposite.
eaglesteve said:
This is ironic. The keyboard is supposed to protect but does the opposite.
Click to expand...
Click to collapse
It definetely does protect (the screen from cracks).
And imho some scratches on the body of the ameo are much better than a cracked screen
You now, we are speaking about a 800€ all in one device? Such a failure must not happen. If you had a 800€ Notebook with the same problem you would complaine about.
This is what my U1000 looks like close to the VGA camera on the front.
There are 2 more areas where I have some damage but I can't capture it properly on camera.
This is why we should take out insurance on our most expensive phones, as i hate scratches on my phones and if you complain about it with your provider/supplier and they are not willing to replace it when its a manufacture defect then i would personally claim on my insurance QUOTE (MY PHONE IS LOST/STOLEN TO GET BACK A REPLACEMENT) Its too expensive a device for it to scratch so easily.
I have the black HTC Advantage and I have the scratches too.
I have the black Athena and barely any scratches on mine. I use the stock case. The only time I got it scratched is when I first got it because I tried to use it without the case. Mistake on my part.
If you search the forum, you can also buy a $25 solution that protects your entire Athena. It's a plastic transparent covering that protects the entire body of the device. I think I may have posted it in the past to the accessories area. Well worth the tiny investment to protect the looks of your device.
Yep, I have the Black HTC Advantage X7500 and I have no scratches on it. I also do carry naked in my pocket especially around the office to meetings. However, I do feel I need something to protect it without gaining the bulk. I am still looking for a belt clip to carry it.
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Looks Intresting.. But we all know that these type of solution are never as easy to install (Esp. as there are 8 pieces for the Athena)
as they are in the Promo vidz. The vidz also mention that the film has Adhesive on it. How would this affect the deve by:
1. Discoloring over time
2. Being able to easily remove the film, if need or if damaged.
3. Being removed from the screen, without pulling the touchscreen's
touch sensor film off.
Has anybody tried this stuff yet? I think I'll wait for more feedback before I buy.
http://mobilitytoday.com/articles/invisible_shield_protection.html
From some of comments, it seems easy to remove from a pda.
I don't know if that comment was from someone who works for ShieldZone though.
Staroip said:
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Click to expand...
Click to collapse
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
ltxda said:
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
Click to expand...
Click to collapse
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
lpsi2000 said:
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
Click to expand...
Click to collapse
I have it on for over 4 months. Search this very forum for an extensive discussion on it. Easy to install with the water spray bottle provided. The screen protector is a bit sticky so I took it off and used a regular one.
Don't ask any more questions. Just search for the original thread here
Here
http://forum.xda-developers.com/showthread.php?t=298808
I bought an el cheapo one from ebay and not only does it feel horrible to the touch the edges are starting to fray. I had bought one for my ppc 6700 like 2 years ago that looked like nothing was on the screen and had great tactile feedback, which ones do you recommend for our kaisers?
I have purchased many screen protectors from cheap sites as well as expensive ones. My favorites are the ones from InvisibleShield. They are a bit more expensive, but they are very precisely cut and last a long time. If they ever get scratched you can get them replaced for free as well. I have not tried BodyGuardz, however, which are the same price, but you get two instead of one in the package.
I like the Boxwave Cleartouch a lot.
If you are anything like me, buy the three pack because you'll probably mess up at least one putting it on. While they say you can wash and reuse them, I don't think it's worth it.
That and a can of compressed air to blow the dust off before you put it on and you should be good.
Side note about using a compressed air can - don't use the straw. I had it blow off directly at my screen and thought my screen was permanently damaged. Thankfully, I had been using the screen protector that came with the tilt which has a bit of adhesive on it, so I only "scratched" the adhesive.
mZimm said:
I have purchased many screen protectors from cheap sites as well as expensive ones. My favorites are the ones from InvisibleShield. They are a bit more expensive, but they are very precisely cut and last a long time. If they ever get scratched you can get them replaced for free as well. I have not tried BodyGuardz, however, which are the same price, but you get two instead of one in the package.
Click to expand...
Click to collapse
I have one of the InvisibleShield HD ones on mine, it is really crisp/clear, doesn't really show fingerprints at all, and its been on my phone for a few months now, and still looks like new.
The only thing I'm not sure of, is that it seems like it may reduce some of the sensitivity of the touchscreen because it is thicker, YMMV though.
I also have the bodyguardz themselves on too, and I'm not nearly as impressed, I'm probably going to pick up one of the Seidio slim rubberdized cases, just trying to spread out the accessory cost right now
I like...
... the one it came with. Still looks new.
im in the UK, i buy 3 screen protectors for asda for £2.99 (guessing thats about $5), so id guess walmart would be a good place to look for cheap ones.
ive had to cut it down to size for my hermes but the screenie i have on it has last over a year
ive also put these screenies on family and friends phones and cameras, no one come back to yet complaining.
My first windows mobile device was in 2002 and i tried every cover for it. From cheap ones to a couple of the more expensive ones. One of which was the PocketPCTECHS writeshield protector.
I bought the double pack, which came with the Antiglare one, and the Crystal Clear one. I applied the Crystal Clear one and it was amazing... i never used the anti-glare till i got my next device and threw it on that one.
They are very durable, can barely tell they're there and are just amazing...
But for my kaiser, i just ordered the invisibleshield for the entire device so i thought, why not let me try their screen protector out and see how it holds up.
so till i try out the invisibleshield, i'm still recommending pocketpctechs.
Martin Fields. As long as you install it properly (cleaning part is very important), you don't even know it is there.
This topic has been covered numerous times before:
Martin Fields Screen Protector
http://forum.xda-developers.com/showthread.php?t=358845
What is the best thing to protect my screen?
http://forum.xda-developers.com/showthread.php?t=353006
Invisibleshield - Does it affect touchscreenability?
http://forum.xda-developers.com/showthread.php?t=353394
liquid screen protector
http://forum.xda-developers.com/showthread.php?t=352818
ClearTouch Crystal Screen Protectors - How Do I Remove?
http://forum.xda-developers.com/showthread.php?t=349407
Using another screen protector
http://forum.xda-developers.com/showthread.php?t=344452
Brando screenprotectors available
http://forum.xda-developers.com/showthread.php?t=329280
Expert Shield screen protectors are just as good as the Martin Fields and a fraction of the price. You can get it for $7.25 shipped.
I have purchased from this ebay seller MANY times. Great communication and fast shipping.
http://cgi.ebay.com/ES-Screen-Prote...yZ116221QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
www.expertshield.com
Registry tweak for screen sensitivity really helps
Think if you using the highe durability thicker screen protectors the increased pressure sensitivity will help alot - am just using the one that came with the TILt on it and it greatly improves tactile feedback and response is almost instantaneous with very minimal pressure
Q: How do I increase the sensitivity of the touch screen?
A: If you want to increase the sensitivity of the touch screen, I recommend setting the registry key (HKLM\Drivers\?TouchPanel\Pressure Threshold) to 5000. It may seem a little high, but the response time is practically instant, and very little pressure required (still enough to avoid accidental presses).
thoughts concerning Martin Fields & Expert Shield protectors
Mine is another vote for the Expert Shield and/or Martin Fields.
Just got it at around seven bucks shipped from eBay. I (prior to this) ordered a Martin Fields and had a difficult time applying it to my Tilt without creating air bubbles. I'm clumsy. and I sneezed half-way through. It's definitely high quality and far better then what shipped with my Tilt. Anyway, I took it into the bathroom and left it to dry so I could attempt to re-apply it later. There, it promptly slipped into the space between the sink cabinet and the tub. Goodbye Martin.
* sigh *
The ES protector seems to be just as good - they're both excellently cut and you can't go wrong with either of them. I don't feel it impairs the screen at all - stylus and finger use ( I use my finger all the time ) are pretty much as it was without the protector. Maybe a tiny touch less sensitive, if you're picky....one can increase sensitivity to compensate. I myself did not find this necessary.
I hope this can be of use to anyone considering the choices. I think a screen protector is a must if you care about your device. I had little regard for my HTC 8125, which lived in my pocket up until last week. The screen held up pretty well, considering it's been to PPC Basra and back. It shared the pocket with my keys, various automotive tools, nuts, bolts, and large quantities of quarters.
m.photo said:
Mine is another vote for the Expert Shield and/or Martin Fields.
Just got it at around seven bucks shipped from eBay. I (prior to this) ordered a Martin Fields and had a difficult time applying it to my Tilt without creating air bubbles. I'm clumsy. and I sneezed half-way through. It's definitely high quality and far better then what shipped with my Tilt. Anyway, I took it into the bathroom and left it to dry so I could attempt to re-apply it later. There, it promptly slipped into the space between the sink cabinet and the tub. Goodbye Martin.
* sigh *
The ES protector seems to be just as good - they're both excellently cut and you can't go wrong with either of them. I don't feel it impairs the screen at all - stylus and finger use ( I use my finger all the time ) are pretty much as it was without the protector. Maybe a tiny touch less sensitive, if you're picky....one can increase sensitivity to compensate. I myself did not find this necessary.
I hope this can be of use to anyone considering the choices. I think a screen protector is a must if you care about your device. I had little regard for my HTC 8125, which lived in my pocket up until last week. The screen held up pretty well, considering it's been to PPC Basra and back. It shared the pocket with my keys, various automotive tools, nuts, bolts, and large quantities of quarters.
Click to expand...
Click to collapse
Sorry to hear about your situation. I know I've screwed up a few of mine in the past. I have Expert Shield protectors on every device I've owned. Nokia 6820, 6822, E-70, PSP, my girl's Sony-Ericsson w850i, LG Shine, my friend's LG Chocolate and I've never had a problem with them.
I'm glad you enjoy yours as much as I do.
has anyone ever tried these?
http://www.thepocketsolution.com/PSI-42588.html?gclid=CPeS1r25xZMCFSQtagodiEn8Cw
I got the Boxwave Cleartouch Crystal and the Anti-Glare, used both for two weeks and I settles on the Crystal..
I just don't like how the Anti-Glare makes the screen look, the Crystal on the other hand is like having nothing on the screen at all it's perfectly clear and well the Anti-Glare really wasn't Anti-Glare..
both are nice and thick and I didn't have to adjust the sensitivity on my Tilt either to use them
WriteShield
Hi,
Someone can say me if WriteShield Screen Protector fit exactly the screen size of the Kaiser without leaving some screen surface unprotected ? Or which one fit exactly the screen's size ?
Thanks in advance
Moo
Ran a search but for some reason it doesn't seem anyone has ever tried these...
http://www.thepocketsolution.com/PSI-42588.html?gclid=CPeS1r25xZMCFSQtagodiEn8Cw
Wanted to get some feedback by members on this forum before purchasing. What do you guys think? Will "static attachment" mess up the screen in any way?
screen protector
you dont have a screen protector on your phone?? it shouldve came with your phone unless you got it else where. better get these
well i screwed up the one that came wit it by trying to get it perfectly on the screen, so after ripping it out over and over again i kept gettin dust on it, so i threw it away and for now i put that original one back that has the pictures on it and shows you how to tilt ur phone? u know the one that comes on it when its brand new wit "warnings" and stuff...
either way...i am about to purchase either the "Expert Shield" or the pocket solution ones and i am tryin to get some feedback on the pocket solution ones first before purchasing. as for now, i have my phone on "baby mode" and am leaving it at home
geez...no one?
Expert Shield all the way. Don't even second guess it.
Expert Shield rocks. I have used them for my Tilt and a couple of cameras. You just have be careful putting them on. It is really easy to get dust under it if your not careful. Look on eBay and you can find them for really cheap shipped from either Hong Kong or Canada. Usually around $10 - $12 shipped. They are more expensive here.
Martin Field screen protector is THE best screen protector for the kaiser.
captainsensible2002 said:
Martin Field screen protector is THE best screen protector for the kaiser.
Click to expand...
Click to collapse
+5 to that. i'm using them now on my tilt.
they're thick, yet flexible, have yet to show any wear from the stylus, & they haven't appeared to affect the touch sensitivity either.
It's been said by someone here that the Expert Shield protectors are just as good as the Martin Fields. He ruined one of his Martin Fields and I told him to try out ES and he said it was great.
They're a lot cheaper also.
ScreenPatronus
I recommend Screen Patronus
cushcalc said:
I recommend Screen Patronus
Click to expand...
Click to collapse
+5 to that. I've used InvisibleSHIELD but removed it and used ScreenPatronus instead.
PSP Screen protector
I'm using a Hiro PSP Screen protector (cut into size) covers 99.9% of the screen almost same thickness as with martin fields, but at a fraction of the price
It also doesn't affect screen sensitivity.
-haze- said:
Expert Shield all the way. Don't even second guess it.
Click to expand...
Click to collapse
I second this, i got my a couple days ago. I love it, its more of a hard plastic type protector, alot better than those expensive sticky films you can buy.
pinkfloyd01 said:
Expert Shield rocks. I have used them for my Tilt and a couple of cameras. You just have be careful putting them on. It is really easy to get dust under it if your not careful. Look on eBay and you can find them for really cheap shipped from either Hong Kong or Canada. Usually around $10 - $12 shipped. They are more expensive here.
Click to expand...
Click to collapse
I bought an Expert Shield and am VERY happpy with it. You're dead on about the dust thing and I'll add fingerprints to that list.
I did discover is that you can remove it and wash the sticky side off with warm water and a clean finger. Then pat dry lightly with lint free cloth for eye glasses. It will it go right back on just like new!!!! I did this three times in a row for fingerprints and dust that was bugging me.
Great product!!!
i would strongly recommend http://www.zagg.com/ Invisible sheild
monster2223 said:
Ran a search but for some reason it doesn't seem anyone has ever tried these...
http://www.thepocketsolution.com/PSI-42588.html?gclid=CPeS1r25xZMCFSQtagodiEn8Cw
Wanted to get some feedback by members on this forum before purchasing. What do you guys think? Will "static attachment" mess up the screen in any way?
Click to expand...
Click to collapse
I'm using them, and they are ok for the money. There are better ones out there like the others are stating. But for 5 bucks, not a bad buy at all.
Also try Boxwave's ClearTouch, It's a bit pricey but man... after 2 month with this thing stick on my screen, it didn't even get a single scratch on it, hard as a rock! Also perfect fit. It's also washable and after wash it with soap and put it back on to your screen it looks like brand new... Well worth the money.
Link here.
Someone here linked them before I bought them and they are garbage. They are a pain in the ass to put on the first one I put on didnt cover enough of the screen and anything off of your fingers stays on there and its very hard to clean you have to use water. Mircofiber cloth wasnt good enough. Within two weeks it bubbled up and I had to trash the 1st one. The 2nd one that came in the pack was too big and it was also did not fit well. Oh yea
I dont recommend them.
Lifetime Shield
Invisible Shield. Thats the one.
Lifetime shield
The invisible shield does have a different feel to it, but its nothing thats a show stopper. The company is good for its work, they have already replaced one due to the lack of a camera opening for my tytn 2.
So I dropped my V20 after a cyclist nearly ran me over and I fell. Fortunately, I had a screen protector on but the top bezel has a nasty dent. Does anybody know where I could buy a replacement bezel, or a good way to fix it myself? I've tried looking on the usual suspects (Aliexpress, eBay etc), but no joy. Many thanks.
malifact said:
So I dropped my V20 after a cyclist nearly ran me over and I fell. Fortunately, I had a screen protector on but the top bezel has a nasty dent. Does anybody know where I could buy a replacement bezel, or a good way to fix it myself? I've tried looking on the usual suspects (Aliexpress, eBay etc), but no joy. Many thanks.
Click to expand...
Click to collapse
So I thought I should reply to my own message in case anybody else finds it useful. I managed to get the parts I needed from a company called ogodeal
(www.ogodeal.com). I emailed several companies and they were the only one that could help. They don't have the parts on their website, so you need to email them to check availability.
malifact said:
So I dropped my V20 after a cyclist nearly ran me over and I fell. Fortunately, I had a screen protector on but the top bezel has a nasty dent. Does anybody know where I could buy a replacement bezel, or a good way to fix it myself? I've tried looking on the usual suspects (Aliexpress, eBay etc), but no joy. Many thanks.
Click to expand...
Click to collapse
EBay has them
http://m.ebay.com/itm/322443870282?_mwBanner=1