[GUIDE] Fix fingerprint - Moto G5 Guides, News, & Discussion

Because many users are repeatedly asking this and everyone needs to answer again and again, I write it up here:
This is only true for Oreo and later Custom ROMs! For nougat refer to post #3 by @TheFixItMan (thanks for the tip that users still use nougat )
You can choose between this ways (doing both is wasted time!)
- Have stock Oreo installed before flashing your ROM (for most users not an option because they already have the issue)
- Flash https://github.com/nift4/nift4.github.io/releases/tag/cedric-fp-fix over your existing custom ROM
Yes, it's so easy

do you have the fix for Lineage os 14.1, i tried this ine didn't work for me. :s

Pedro_r said:
do you have the fix for Lineage os 14.1, i tried this ine didn't work for me. :s
Click to expand...
Click to collapse
Download stock nougat firmware and flash just the following two parts
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
For fingerprint to work you need to have a base stock firmware that matches the base of the rom you are using - so in the case of lineage 14.1 that is nougat
The zip file in the op contains oero files so is for people who never bothered flashing oero firmware when they flashed an oero based custom rom
OP should explain what the zip file does (flashes the two files I've mentioned but from oero firmware) to help people understand the issue

TheFixItMan said:
Download stock nougat firmware and flash just the following two parts
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
For fingerprint to work you need to have a base stock firmware that matches the base of the rom you are using - so in the case of lineage 14.1 that is nougat
The zip file in the op contains oero files so is for people who never bothered flashing oero firmware when they flashed an oero based custom rom
OP should explain what the zip file does (flashes the two files I've mentioned but from oero firmware) to help people understand the issue
Click to expand...
Click to collapse
I explain, thanks for the tip

Hi,
I have a motog5 xt1676.
I was on Nougat and I updated to Carbon Rom (after trying with lineage 17, same issue) and i have to choices:
-Doing nothing and people can hear me when i am in speakerphone but the fingerprint doesn't work.
-I patch with the first link for orea then the fingerprint work but people can't hear me when i'm in speakerphone.
Patching with nougat files does nothing...
Is there a way to edit the fix or to make a fix myself avoiding the speaker issue ?
I though to change build.prop or a way to change the way sound is mixed during call but i did'nt test changing all lines.
Do you have an other idea ?
A fix for pie ? ( Carbon is Pie when Pie is cooked too much time =D )
Thank you,
Pierre Archer
The ROM: CARBON-CR-7.0-OPAL-RELEASE-cedric-20200920-0426

piecraxe said:
Hi,
I have a motog5 xt1676.
I was on Nougat and I updated to Carbon Rom (after trying with lineage 17, same issue) and i have to choices:
-Doing nothing and people can hear me when i am in speakerphone but the fingerprint doesn't work.
-I patch with the first link for orea then the fingerprint work but people can't hear me when i'm in speakerphone.
Patching with nougat files does nothing...
Is there a way to edit the fix or to make a fix myself avoiding the speaker issue ?
I though to change build.prop or a way to change the way sound is mixed during call but i did'nt test changing all lines.
Do you have an other idea ?
A fix for pie ? ( Carbon is Pie when Pie is cooked too much time =D )
Thank you,
Pierre Archer
The ROM: CARBON-CR-7.0-OPAL-RELEASE-cedric-20200920-0426
Click to expand...
Click to collapse
As explained
If your stock rom firmware is nougat I suggest updating it to oreo to use pie custom rom
Read my post above (post number three) for full explaination
Any other issues is probably a rom issue - I don't even think carbon rom is actively supported for this device. Use lineageos/Mint os from dev section

TheFixItMan said:
As explained
If your stock rom firmware is nougat I suggest updating it to oreo to use pie custom rom
Read my post above (post number three) for full explaination
Any other issues is probably a rom issue - I don't even think carbon rom is actively supported for this device. Use lineageos/Mint os from dev section
Click to expand...
Click to collapse
Thank you !
Sorry, I midunderstood, I understand better now.
Then installing oreo stock ROM add more "compatibility files" to link with a pie ROM from nougat.
Lineage os is not officially supported on motog5 device, thats why i looked for carbon. But the unofficial lineage os for motog5 look like as frequently updated as "official" carbon rom. I dont know if Carbon updates are caring of hardware details and if they are released without real adaptation. Lineage os pay probably more attention to hardware because motog5 is not officially supported by lineage... Idk...
Thank you,
Pierre Archer

piecraxe said:
Thank you !
Sorry, I midunderstood, I understand better now.
Then installing oreo stock ROM add more "compatibility files" to link with a pie ROM from nougat.
Lineage os is not officially supported on motog5 device, thats why i looked for carbon. But the unofficial lineage os for motog5 look like as frequently updated as "official" carbon rom. I dont know if Carbon updates are caring of hardware details and if they are released without real adaptation. Lineage os pay probably more attention to hardware because motog5 is not officially supported by lineage... Idk...
Thank you,
Pierre Archer
Click to expand...
Click to collapse
Don't be concerned too much about the terms official and unofficial
Nearly all lineageos roms will start off as unofficial - it's users who build it. It's only when they are submitted to lineageos and they add it to their build server it becomes official but its the same device tree.
The only reason the lineage os rom has not been made official is because the camera is not fully working like it is in stock rom so it doesn't meet the criteria to be submitted

Related

[HELP THREAD] Ask any questions [NOOB FRIENDLY]

Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!​
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Can you provide instruction on how to disassemble the phone. Also where to order spares from. The digitiser on my Storm is cracked and Wileyfox want to charge me the price of a new phone to replace it.
JonnyTech said:
Can you provide instruction on how to disassemble the phone. Also where to order spares from. The digitiser on my Storm is cracked and Wileyfox want to charge me the price of a new phone to replace it.
Click to expand...
Click to collapse
Eh, sorry mate, I don't know how to disassemble the device and no one else sure as hell knows how to do it (at least on other websites). There are only reviews and unboxing experiences of the Wileyfox Storm and guides on how to flash ROMs, root and recoveries, etc. But some member will help you out, surely! If nobody seems to be knowing the issue, pm a forum moderator so that he/she can guide you to some links/methods. :fingers-crossed: Best of Luck!
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Downgrade from Nougat to COS 13.1.5-ZNH2KAS7EC-kipper
Hello everybody
I need some help with my Wileyfox Storm. Yesterday it become an OTA update and my old Original COS13 is away and i have now Android Nougat 7.1.1. Stock Rom.
I will undo this, and i don't know how to start. I need a noob friendly Thread to do this.
I hope somebody can help me.
Grettings from Germany
Sorry for the poor English
Downgrade to android 6.0 marshmallow
Hello everyone, well recently my phone updated to android 7.1.1 and I didn´t like very much, so could help me and tell me if is there a way to go back to android marshmallow 6.0, just like it came when I bought it. Is it possible and does anyone know how to do it?
Okay so im trying to get lineage Os on my phone, this OS isn't working at all i get in bootloops etc. So i tried AOSP extended and i managed to get this working. But when i try to install gapps or try to flash Super su or magisk it returns error 1. The problem is in the recovery probably. So i tried to flash / boot a different TWRP version but all of the other versions give me this error: FAILED (remote: dtb not found). I would appreciate any help i can get i am hardstuck because i cant get a proper working TWRP recovery working and the only rom i am able to flash is AOX but without gapps that isnt worth much.
Thanks in advance.
Infiniterum said:
Okay so im trying to get lineage Os on my phone, this OS isn't working at all i get in bootloops etc.
Click to expand...
Click to collapse
First of all, what build of LineageOS are you trying to install??? If it is dated 12.07.2017 or 05.07.2017 - it won't work at all. That builds are broken. Use 28.06 or 21.06 build.
Secondly, what TWRP version do you use? I installed LOS via TWRP 3.1.0.0.
Newer version is available now.
And what bootloader version do you have on your Storm. I mean what stock ROM was installed before installing TWRP.
Infiniterum said:
So i tried AOSP extended and i managed to get this working. But when i try to install gapps or try to flash Super su or magisk it returns error 1.
Click to expand...
Click to collapse
It seems to me, AEX is pre-rooted and comes with magisk pre-installed. When I installed that - only gapps were necessary.
Gapps need to be installed immediately after installing ROM, without any reboot.
~FNWL~ said:
First of all, what build of LineageOS are you trying to install??? If it is dated 12.07.2017 or 05.07.2017 - it won't work at all. That builds are broken. Use 28.06 or 21.06 build.
Secondly, what TWRP version do you use? I installed LOS via TWRP 3.1.0.0.
Newer version is available now.
And what bootloader version do you have on your Storm. I mean what stock ROM was installed before installing TWRP.
It seems to me, AEX is pre-rooted and comes with magisk pre-installed. When I installed that - only gapps were necessary.
Gapps need to be installed immediately after installing ROM, without any reboot.
Click to expand...
Click to collapse
I was using 05/07 build so that explains that. Im using TWRP 3.0.3.0 Kipper, but i can't find newe TWRP builds for the wileyfox storm, if you could give me some links that would be great. Stock rom was android 7.1 i believe and bootloader version is 'kipper-N-g2253387'. When i installed AEX via my (probably corrupt) TWRP recovery it says it also flashed Magisk but once the phone starts and i go to the magisk app it says im unrooted and so does rootchecker say. I think my biggest problem is with the TWRP recovery. If you could get me the download links of the versions your using that would be great.
Here you can get TWRP
https://www.androidfilehost.com/?w=files&flid=189519
Thanks to kligli from 4pda
Maybe the bootloader from 7.1-wileyfox is not compatible with Lineage OS.
Before flashing TWRP and LOS, I rolled back to COS 13.1.5 official Wileyfox ROM via fastboot. So I don't really know whether it is compatible or not.
~FNWL~ said:
Here you can get TWRP
https://www.androidfilehost.com/?w=files&flid=189519
Thanks to kligli from 4pda
Maybe the bootloader from 7.1-wileyfox is not compatible with Lineage OS.
Before flashing TWRP and LOS, I rolled back to COS 13.1.5 official Wileyfox ROM via fastboot. So I don't really know whether it is compatible or not.
Click to expand...
Click to collapse
So i flashed the twrp 3.1 and that works, it installs gapps now and no error with lineage OS, im gonna boot phone soon hopefully lineage will start to, i didnt know what gapps to flash but i tried the arm64 because i read it somewhere. But isn't the Storm ARM?
Use ARM64 - 7.1 - nano or pico GApps. Lineage official site said it works even without any GApps, but I have not tried that.
So I just bought a wileyfox storm few days ago and am on 7.1.1 what is the rooting method thanks.
---------- Post added at 02:46 AM ---------- Previous post was at 02:26 AM ----------
Also a just went into the bootloader and status is unlocked but I never unlocked the bootloader yet any ideas on this??
Hi Guys
Someone of you have audio problems on whatsapp ( with integrated and bt mic ) when recording audio? ( noise and metallic audio recording )
I'm on Lineage 7.1.2 - 14.1-20180110-nightly but have same problems with previous rom

Hydrogen os nougat for oneplus 2

Hi guys I found this rom on the internet, I downloaded it but after installing it, at the time of the first boot sends me the phone in bootlop, why? Has anyone tried it or do you know why the Roma does not start?
You can find the link related to the rom on "forum.oneplus.net" thanks.
Ps. I can not publish the link
Well, if you read the last message here, you'll see that it's most likely not official. I wouldn't use that rom if I was you, best is either to stay at stock oxygen or just go with an android oreo rom (like AOSIP or any other found on this forum)

Possible T560 and T561 roms on Russian forum

a user sent me a PM with a link to a Russian forum that may contain roms for both T560 and T561.
I can see links for CM 11 to 13 and Lineage 14 but I am not sure if these are actual roms, fix or bug reports.
So anyone here speak Russian?
link here: MOD Edit :- Links Removed
Let's discuss here
Was able to download the firmware for CM 13 (MM 6.0.1) and Lineage 14 but haven't flashed them yet since the link for boot.img for the roms is dead. hmmm
Lineage 14: MOD Edit :- Links Removed
CM 13: MOD Edit :- Links Removed
I tried cm12.1, 13, 14.1 in my sm-t560.
Cm12.1 it works but then it restarts
CM 13 no bugs
lineage 14.1 no works
JanValentine said:
I tried cm12.1, 13, 14.1 in my sm-t560.
Cm12.1 it works but then it restarts
CM 13 no bugs
lineage 14.1 no works
Click to expand...
Click to collapse
Hi so CM 13 is ok from the following links? Did you need to flash the boot.img?
I read you said no bugs but to be sure, does the USB OTG work on the CM 13 still?
Can you lay down what you did exactly. Thanks buddy!
cmlosaria said:
Hi so CM 13 is ok from the following links? Did you need to flash the boot.img?
I read you said no bugs but to be sure, does the USB OTG work on the CM 13 still?
Can you lay down what you did exactly. Thanks buddy!
Click to expand...
Click to collapse
Do not install the boot.img.
OTG works.
Thanks buddy
Will just do a backup and flash this. We can talk about features here as well so others will know. I have a T561
Are you using TWRP 3.0 on your T560? It's a requirement for flashing lineage 14.
However, I'm using T561 and I can't find a compatible TWRP version 3.0 for my device.
Will try to flash CM 13 now. Will update.
cmlosaria said:
Are you using TWRP 3.0 on your T560? It's a requirement for flashing lineage 14.
However, I'm using T561 and I can't find a compatible TWRP version 3.0 for my device.
Will try to flash CM 13 now. Will update.
Click to expand...
Click to collapse
3.0.2-0, the one that is published here.
Yes I saw T560 has a TWRP version 3. However T561 doesn't have it and the one on the Russian forum seems pouting to a dead link. Will try to contact the author. He was the one who sent me a PM.
Anyway, so CM 13 worked for me. Still testing but I find the animations a little sluggish. Not sure but in the early days of Android ROM flashing it was advised to let a new rom settle for a couple of hours, even days. I will be patient with this. It's a fresh sight over TouchWiz.
Anyway quite happy I found a working rom after months of searching (CM 13).
All essentials are working so far.
Wifi
USB OTG
Camera
Sim (t561)
USB MTP seems broken. My laptop can detect it and shows as removable storage but it doesn't show on the windows explorer. Not sure what's going on. Anyway not a biggie I can use the OTG to transfer files.
Attaching some pictures here.
Will update on performance.
cmlosaria said:
Yes I saw T560 has a TWRP version 3. However T561 doesn't have it and the one on the Russian forum seems pouting to a dead link. Will try to contact the author. He was the one who sent me a PM.
Anyway, so CM 13 worked for me. Still testing but I find the animations a little sluggish. Not sure but in the early days of Android ROM flashing it was advised to let a new rom settle for a couple of hours, even days. I will be patient with this. It's a fresh sight over TouchWiz.
Anyway quite happy I found a working rom after months of searching (CM 13).
All essentials are working so far.
Wifi
USB OTG
Camera
Sim (t561)
USB MTP seems broken. My laptop can detect it and shows as removable storage but it doesn't show on the windows explorer. Not sure what's going on. Anyway not a biggie I can use the OTG to transfer files.
Attaching some pictures here.
Will update on performance.
Click to expand...
Click to collapse
Do you have the img of 14.1?
Nope non, haven't tried flashing lineage 14 since it says it requires TWRP 3.0 which I don't have.
How do you find CM 13 so far? Wonder if the lineage 14 OS is much faster. Haven't heard from the creator yet. He did mention he isn't as active here.
One thing I noticed is the CM 13 (marshmallow) does not support moving of app from internal to partitioned SDcard via App2SD or Link2SD.
Not sure if it's a Marshmallow thing (adoptable storage) or a rom thing.
Thoughts?
Edit:
Moving2SD isn't supported but linking to SD is.
cmlosaria said:
Are you using TWRP 3.0 on your T560? It's a requirement for flashing lineage 14.
However, I'm using T561 and I can't find a compatible TWRP version 3.0 for my device.
Will try to flash CM 13 now. Will update.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1BdV8Qrn7Vl-8vB7LmYT1AB5DOy-Ry4Y3/view
All thanked for Ma3a_XaTa
Wow thank you for this. Yes he was the one who sent me a message. Do I need to flash this via Odin or flashing it via existing TWRP is ok? Have you tried Lineage 14?
EDIT:
Flashed the TWRP 3.0 via TWRP 2.8. Will update if Lineage 14 is ok.
EDIT:
The device boots up on Lineage 14 but I am always notified of the following warning.
"com.android.phone has stopped"
I am able to set up the tablet but that warning always pops up even after two install attempts.
Also, The SIM card isn't detected on this ROM, which is a no biggie but would help if anyone knows of a fix?
This is the error I am recieving. Hope there's a fix for this
Edit:
Edit:
Tried the following steps
Clear Cache and Data of the Phone App, SIM Toolkit, Reboot. The problem still persists.
Lineage 14 is so much faster then CM 13. We're so close already to having a useable Nougat ROM. Maybe it has something to do with that boot.img for lineage which can't be downloaded.
Found a temporary fix.
Activate developer options > USB Debugging. Then when the warning prompts again, there is now an option > hide till device restarts.
cmlosaria said:
Wow thank you for this. Yes he was the one who sent me a message. Do I need to flash this via Odin or flashing it via existing TWRP is ok? Have you tried Lineage 14?
EDIT:
Flashed the TWRP 3.0 via TWRP 2.8. Will update if Lineage 14 is ok.
EDIT:
The device boots up on Lineage 14 but I am always notified of the following warning.
"com.android.phone has stopped"
I am able to set up the tablet but that warning always pops up even after two install attempts.
Also, The SIM card isn't detected on this ROM, which is a no biggie but would help if anyone knows of a fix?
Click to expand...
Click to collapse
If you want to do a good job, you and the experienced people can find solutions to some problems in this rom
I wrote a guide on how to install this Nougat based ROM in my website, along with initial review and fix to the pesky notifications.
I hope this is allowed, otherwise please delete but don't ban me mods please!
Link: MOD Edit:- Links Removed
Credits goes to Ma3a_XaTa, Mahareg, Ashky, LineageOS team and the XDA Community.
cmlosaria said:
I wrote a guide on how to install this Nougat based ROM in my website, along with initial review and fix to the pesky notifications.
I hope this is allowed, otherwise please delete but don't ban me mods please!
Link: MOD Edit:- Links Removed
Credits goes to Ma3a_XaTa, Mahareg, Ashky, LineageOS team and the XDA Community.
Click to expand...
Click to collapse
Good work many thanks for you and we wating fixes thank you
So far so good using this tablet on Lineage 14. I am using a very good launcher called Sentio Launcher. Allows me to work on the tablet like a laptop. I have a Bluetooth keyboard.
This is good as a daily driver. Wish the SIM function can be fixed but I don't mind really :3
sm-t560 does not work (7.1.2), do not pass the boot.img?

Nfounds treasure of 9.0 AOSP GSI roms (ALL THE BIG ONES ARE HERE)

This is for anyone who wishes to try trebble AOSP 9.0 roms
:cyclops:
(I know, the sharp, knowledgeable members have already found all of this and more, but for those who are newbies to this , like i was 2 weeks ago, this is important)
Since amazingly, not one developer is able to make roms specifically for our phone, we Flashaholics must go for the Trebble \ GSI roms to get high on Android.:fingers-crossed:
Here are some nice roms by NFOUND, a fine developer who has made his personal\public collection of GSI roms for popular AOSP Roms.
AOKP, POSP, ION, HAVOC os, NITROGEN os, AEX, roms and so much more
I bow to his \her greatness.:good::good::good::good::good::victory:
Thanks for sharing , bro
https://androidfilehost.com/?w=files&flid=282119
NOT ALL OF THEM WILL WORK ON YOUR PHONE
SOME REQUIRE FIXES, WHICH ARE IN THE ROM FOLDER
As to how to flash em, heres an excellent guide.....
https://forum.xda-developers.com/mi-max-3/how-to/guide-beginners-guide-to-gsi-aosp-rom-t3910085
TIP--- if you cant get to boot using the xiaomi.eu rom with the latest vendor file like 9.3.14 etc
consider using the xiaomi.eu rom with the earlier pie vendor like 8.12.23 because it also boots most of the Nfound Roms.
Thanks to Germano1980 for introducing me to his work
Cheers!:victory:
I always watch his videos on YouTube to see what he's throwing (of course not understanding anything because it's all in Russian).
You forgot AOSiP which is the best one right now as everything works even has gestures too. Also mention that if people cant get to boot using latest vendor file like 9.3.14 etc that they should consider and earlier pie vendor like 8.12.23 as that boots most of these. Good post mate keep it up
I've seen some ROMs treble from it but I'm afraid to install it because of the arb
~Cristiano said:
I've seen some ROMs treble from it but I'm afraid to install it because of the arb
Click to expand...
Click to collapse
GSIs don't have ARB
~Cristiano said:
I've seen some ROMs treble from it but I'm afraid to install it because of the arb
Click to expand...
Click to collapse
That's only applicable with stock roms mate not custom and GSI.
Why is it necessary to install xiaomi.eu before flashing the custom rom?
~Cristiano said:
Why is it necessary to install xiaomi.eu before flashing the custom rom?
Click to expand...
Click to collapse
Cause it's better than stock for flashing. I don't know the exact reason is but it is a better base. The vendors also seem to be flash friendly
New Nfound GSI: pixel experience from March.
https://androidfilehost.com/?w=files&flid=291933
Works well after Google dialer patch.
super_sonic said:
New Nfound GSI: pixel experience from March.
https://androidfilehost.com/?w=files&flid=291933
Works well after Google dialer patch.
Click to expand...
Click to collapse
This the best one for mm3?
I like EvolutionX and PixelExperience... I have no issue.
super_sonic said:
I like EvolutionX and PixelExperience... I have no issue.
Click to expand...
Click to collapse
what rom miui you come from?

Multiple issues - Advise on clean-slate reset?

Apologies for cryptic title. My Mi A1 has multiple issues and a patchy update history. I don't know how to narrow this down to a single, simple question. Hope someone can help to make sense of this.
History: Bought new with stock Android One, Oreo. Few months later updated to Android One, Pie (official update). This caused big problems with wifi (connections constantly dropped and VERY slow downloads). Thought about reverting to Oreo, but decided to change to Lineage (which at the time was Oreo). So I downgraded from Android One Pie to Lineage 15 (Oreo). Generally worked OK, but with 3 big problems:
1. No sound during phone calls (I can't hear them, they can't hear me). Found a workaround involving editing the build.prop file (sorry, can't post link), but fix is temporary and needs regular re-boots.
2. Fingerprint sensor not working (no options to set fingerprint).
3. Camera app lost functionality related to dual lens.
I subsequently updated from LOS 15 (Oreo) to LOS 16 (Pie). Issues still there.
I wonder if I have some missing/incompatible vendor firmware components, but I don't really understand how this works. If I download and install, say, a LOS rom, does it contain EVERYTHING my phone needs to work, or do I need to already have some proprietary bits somewhere on the phone?
Is my best bet to start afresh (clean slate) and if so what would you recommend? Any help/insight greatly appreciated!
Hey pal, the Android Pie Firmware has some kind of anti-roll back protection, so when you install a non-pie ROM such as LOS 15 using Pie Firmware you'll have that problems like no-fingerprint, no incall audio, etc. If you install an Oreo Firmware with an Oreo ROM, you'll have fingerprint but no IMEI/Signal (and other problems).
You have 2 options:
1) Update your firmware to the latest Pie version and install a ROM like Pixel Experience or HavocOS (both Pie) and you're set, IMEI, Signal, Audio and Fingerprints will be working OK.
2) Install the latest Pie compilation using MiFlash and leave it stock.
Greetings.
Thanks for prompt reply! Can you spell something out for me please?
Regarding 1) I have already updated to LOS 16, which is Pie. Is that what you meant by "update your firmware to the latest pie"? Or do you mean a stock firmware? If the latter, then I could find a MIUI rom (from en.miui.com) but not Android One.
Regarding 2) Again, by "latest Pie compilation" do you mean the stock rom, like the MIUI mentioned above?
Thanks

Categories

Resources