hello guys, sorry, i'm new here.. i've just faced the problem with my phone.. idk why my phone was stuck, i've tried to remove the battery and tried to restart, it seemed the same, just stuck on samsung logo. i tried to enter to recovery mode, it failed. i've tried to install the original stockrom and it's failed..
here the problem and condition:
1. stuck on samsung logo
2. can't enter recovery mode
3. only download mode can be use
i've tried the stockrom but in odin said...:
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin engine v(ID:3.1101)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Initialzation..
<ID:0/021> Get PIT for mapping..
<ID:0/021> Firmware update start..
<ID:0/021> SingleDownload.
<ID:0/021> spl.img
<ID:0/021> NAND Write Start!!
<ID:0/021> sboot.bin
<ID:0/021> sboot2.bin
<ID:0/021> param.lfs
<ID:0/021> boot.img
<ID:0/021> recovery.img
<ID:0/021> system.img
<ID:0/021> cache.img
<ID:0/021> hidden.img
<ID:0/021> SPRDCP.img
<ID:0/021> FAIL!
<ID:0/021>
<ID:0/021> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should I do?
need help, please.. thanks
due to the change in the stock rom that contains lzm comression so the ordinary odin wont flash it
so use patched last version ( patched make sure)
and happy flashing same happen to me and solved by this
good luck
Related
Hello my friends, how are you all
I present to you a simple explanation to you suffers from spam in odin
For example:
Code:
complete write operation failed
Odin flash fail
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> system.img
<ID:0/025> NAND Write Start!!
<ID:0/025>
<ID:0/025> Complete(Write) operation failed.
<ID:0/025> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The simple solution is to follow the following steps:
1-The installation program Odin3 v3.07
2-Enter the download status And connect the phone to the computer
Then open the program Odin
3-We download the file PIT
4-And sail on this phone to correct some errors and keep in the PIT box in Odin
5-We work to Wipe factory
6-We install from four files
I9500XXUAMDE_I9500ODDAMDC_INU.zip
7-After we wipe factory And restart the phone.:good:
And here we have the explanation and I hope I succeeded the explanation Greetings everyone
Thank you friend, looks very useful!
tamirda said:
Thank you friend, looks very useful!
Click to expand...
Click to collapse
Thank you my friend tamirda
Sent from my GT-I9500 using xda app-developers app
Why are you messing around with the PIT file?
This is the easiest way to brick your phone if the pit file you use is corrupt or not for your phone. And I'm not talking about soft brick thats recoverable... You will have a brand new $600+ paperweight...
All you need to flash is the rom file (must be either .tar or .tar.md5) in PDA, make sure repartition isn't ticked and flash...
Also make sure KIES is NOT RUNNING...
If you have the new firmware, MH8, then this definately WON'T work...
I have the same problem but the solution does not work
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY
yony100200 said:
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY
Click to expand...
Click to collapse
simply go to http://www.sammobile.com/firmwares/2/
download your latest firmware and flash via odin
1. do no check RE-PARTITION option..leave it with auto-reboot and F.reset time (DEFAULT option)
2. flash only PDA file or single file downloaded from sammobile
got a G900H with NULL/NULL
wanted to flash a new rom to see if it helps
ODIN 3.09 + G900HXXU1ANK1 rom
Code:
<ID:0/067> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANK1_G900HOXE1ANK3_G900HXXU1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/067> Odin v.3 engine (ID:67)..
<ID:0/067> File analysis..
<ID:0/067> SetupConnection..
<ID:0/067> Initialzation..
<ID:0/067> Get PIT for mapping..
<ID:0/067> Firmware update start..
<ID:0/067> SingleDownload.
<ID:0/067> sboot.bin
<ID:0/067> NAND Write Start!!
<ID:0/067> boot.img
<ID:0/067> recovery.img
<ID:0/067> system.img
<ID:0/067> modem.bin
<ID:0/067> cache.img
<ID:0/067> hidden.img
<ID:0/067> FAIL!
<ID:0/067>
<ID:0/067> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
fails after hidden
any idea how to fix?
at least before that it booted
I think it's meant to fail on the hidden partition if my memory serves me right, remember reading that somewhere
After flashing, boot to recovery, factory reset
*Detection* said:
I think it's meant to fail on the hidden partition if my memory serves me right, remember reading that somewhere
After flashing, boot to recovery, factory reset
Click to expand...
Click to collapse
how does one fix this issue?
iakovl said:
got a G900H with NULL/NULL
wanted to flash a new rom to see if it helps
ODIN 3.09 + G900HXXU1ANK1 rom
Code:
<ID:0/067> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANK1_G900HOXE1ANK3_G900HXXU1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/067> Odin v.3 engine (ID:67)..
<ID:0/067> File analysis..
<ID:0/067> SetupConnection..
<ID:0/067> Initialzation..
<ID:0/067> Get PIT for mapping..
<ID:0/067> Firmware update start..
<ID:0/067> SingleDownload.
<ID:0/067> sboot.bin
<ID:0/067> NAND Write Start!!
<ID:0/067> boot.img
<ID:0/067> recovery.img
<ID:0/067> system.img
<ID:0/067> modem.bin
<ID:0/067> cache.img
<ID:0/067> hidden.img
<ID:0/067> FAIL!
<ID:0/067>
<ID:0/067> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
fails after hidden
any idea how to fix?
at least before that it booted
Click to expand...
Click to collapse
Try with PIT file.
Are you sure that this is H variant and ROM which you want to flash is proper?
qubbus said:
Try with PIT file.
Are you sure that this is H variant and ROM which you want to flash is proper?
Click to expand...
Click to collapse
Can you link to a pit file?
It says h on the back and if it wasn't the Odin would have failed much sooner
iakovl said:
Can you link to a pit file?
It says h on the back and if it wasn't the Odin would have failed much sooner
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
bottom of post.
Maybe some operators sh*t (i mean bloatware ) ?
Any other ideas?
I recently was attempting to downgrade my kernal so I could root my S5. I knew to this and I'm not sure where I messed up. My phone is stuck in a bootloop. I've tried multiple times to reset through ODIN to stack firmware. This is what it reads. Please help if you can.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Download odin for your device, and a official samsu rom md5 for your device.
Put the original rom to your device with odin, but first enter in Download mode ( volume - with home button and power pressed in same time.)
necromisty said:
Download odin for your device, and a official samsu rom md5 for your device.
Put the original rom to your device with odin, but first enter in Download mode ( volume - with home button and power pressed in same time.)
Click to expand...
Click to collapse
I've done that, I've tried three versions of Odin and Five different versions of ROM.
Bootloader is locked, search the forum for tutorials for your model S5 (Verizon?)
Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
fatfei said:
Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Just an update, i have loaded twrp on there but too scared to touch anything else pending help
Hi try this guide find a g900f pit file or if you have made a backup of your own and flash it via odin then try again to flash stock
Url : forum.xda-developers.com/showthread.php?t=2659635
Unfortunately I now get this error on Odin
D:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1205)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> modem.bin
<ID:0/010> cache.img.ext4
<ID:0/010> hidden.img.ext4
<ID:0/010> FAIL! (Size)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
force alarm, i was just being impatient. all working. Thank you very much for the help
No problem mate ?
Hello to all,
i am using an S4 GT-I9500 indian variant,
while flashing the phone with the stock firmware i did a mistake and clicked on the wrong button "BL" instead of "AP"
in my ODIN software and the operation failed with the button "BL".
now i tried to installing the firmware by using the "AP" button but i am getting the following message in the ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHPI2_I9500YDDHPI1_I9500DDUHPE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have tried it using recovery mode with CWM and TWRP boot loaders, and i am not able to wipe the data using the TWRP boot loader.....
and even tried connecting to samsung Kies it gives me an error message as "GT-I9500" does not support initialising....
so can anyone please help me get my phone back to running....
Thanks in advance......
Are you flashing the latest stock ROM with Odin?
STOCK Rom
Are you flashing the latest stock ROM with Odin?
Yes, My phone was stuck in Samsung logo (Boot loop)
So i tried flashing it with the stock ROM with Odin
when i tried it did not complete the flashing, instead it ended up with a Blank screens with the message that "Firmware encountered an issue please select recovery mode in Kies and try Again".
And when i try flashing the Stock ROM with Odin this the following tread that i am getting.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHPI2_I9500YDDHPI1_I9500DDUHPE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried using Odin 3.07, the original Samsung usb cable, or a different usb 2.0 port?