installation via Odin failed - Samsung Galaxy S7 Edge Questions and Answers

Hi,
i have a Samsung S 7 Edge
i tried to flash ROM with Odin and I never succedd.
i have done a lot of manipulations and i never successeed
can you help me please?
(i don't know how to send you an attached filed)
Regards
Merci
T.

trazomtg said:
Hi,
i have a Samsung S 7 Edge
i tried to flash ROM with Odin and I never succedd.
i have done a lot of manipulations and i never successeed
can you help me please?
(i don't know how to send you an attached filed)
Regards
Merci
T.
Click to expand...
Click to collapse
i dont own a s7 but i think you shouldnt download custom roms via odin but from twrp... But do you mean stock rom then yes use odin. Find your firmware on sammobile and unzip it and use the .tar file on odin while your phone is connected on the pc with download modus and then click start it will reboot and then youve got your stock rom..

2gg1 said:
i dont own a s7 but i think you shouldnt download custom roms via odin but from twrp... But do you mean stock rom then yes use odin. Find your firmware on sammobile and unzip it and use the .tar file on odin while your phone is connected on the pc with download modus and then click start it will reboot and then youve got your stock rom..
Click to expand...
Click to collapse
Is it possible that ma cable is the problem? when i connect it to launch the battery i have a lot of problems of connection

trazomtg said:
Is it possible that ma cable is the problem? when i connect it to launch the battery i have a lot of problems of connection
Click to expand...
Click to collapse
Yes its possible. Have you installed the samsung usb drivers?

2gg1 said:
Yes its possible. Have you installed the samsung usb drivers?
Click to expand...
Click to collapse
yes i did

trazomtg said:
yes i did
Click to expand...
Click to collapse
it works!! thaht was the cable

trazomtg said:
it works!! thaht was the cable
Click to expand...
Click to collapse
youd be surprised at how often its the cable. We always suggest to use the factory cable when available and a very high quality aftermarket when the factory one isnt available. Different computer, different firmware etc etc etc. Glad you got it working via the power of helpful people on this forum!

Related

[Q] can i flash any regions firmware on my galaxy s5?

hey, i recently bought an unlocked Samsung s5 and online it didn't not specify what region it was made for stop doesn't have all the languages i need. is it possible to just flash another regions firmware or does it need to be specifically for my galaxy?
i have a G900f
skrcer1 said:
hey, i recently bought an unlocked Samsung s5 and online it didn't not specify what region it was made for stop doesn't have all the languages i need. is it possible to just flash another regions firmware or does it need to be specifically for my galaxy?
i have a G900f
Click to expand...
Click to collapse
Yes that possible as long as its G900F firmware. Just flash it with Odin 3.09.
gee2012 said:
Yes that possible as long as its G900F firmware. Just flash it with Odin 3.09.
Click to expand...
Click to collapse
awesome thanks! do you know how to find which firmware is for my region?
skrcer1 said:
awesome thanks! do you know how to find which firmware is for my region?
Click to expand...
Click to collapse
Look here www.sammobile.com/firmwares/2/ and look for a rom in your region. Where do you live?
gee2012 said:
Look here www.sammobile.com/firmwares/2/ and look for a rom in your region. Where do you live?
Click to expand...
Click to collapse
Israel
skrcer1 said:
Israel
Click to expand...
Click to collapse
There are Israelian roms available for the G900F on Sammobile. Flash the one you need with Odin 3.09.
gee2012 said:
There are Israelian roms available for the G900F on Sammobile. Flash the one you need with Odin 3.09.
Click to expand...
Click to collapse
thanks !
hey so I tried flashing with odin and at the end it says failed and now my phone says "firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
I tried reflashing with the same downloaded israeli firmware from and the same thing happens. It still gets a blue ready sign in odin. any ideas of how to fix this?
skrcer1 said:
hey so I tried flashing with odin and at the end it says failed and now my phone says "firmware upgrade encountered an issue. Please select recovery mode in kies & try again."
I tried reflashing with the same downloaded israeli firmware from and the same thing happens. It still gets a blue ready sign in odin. any ideas of how to fix this?
Click to expand...
Click to collapse
Oke, just do the following:
- Disable Kies in windows task manager
- Pull the battery and wait 20 seconds
- Boot into downloadmode and connect to the pc
- Untick Auto Reboot in Odin 3.09 and place the rom in AP
- Hit start and when done pull the battery
- Boot into recovery and data factory reset and boot.
gee2012 said:
Oke, just do the following:
- Disable Kies in windows task manager
- Pull the battery and wait 20 seconds
- Boot into downloadmode and connect to the pc
- Untick Auto Reboot in Odin 3.09 and place the rom in AP
- Hit start and when done pull the battery
- Boot into recovery and data factory reset and boot.
Click to expand...
Click to collapse
when it finishes in odin it still says downloading... do not turn off target on the phone. is that fine?
skrcer1 said:
when it finishes in odin it still says downloading... do not turn off target on the phone. is that fine?
Click to expand...
Click to collapse
Yup, pull the battery, wait 20 seconds, go into recovery and factory reset and reboot.
gee2012 said:
Yup, pull the battery, wait 20 seconds, go into recovery and factory reset and reboot.
Click to expand...
Click to collapse
Ok, i have tried and when i hold volume up, power, and menu key at once it brings me back to the kies firmware issue screen
skrcer1 said:
Ok, i have tried and when i hold volume up, power, and menu key at once it brings me back to the kies firmware issue screen
Click to expand...
Click to collapse
Was the rom completely flashed by Odin? Did it say reset in the window ?
gee2012 said:
Was the rom completely flashed by Odin? Did it say reset in the window ?
Click to expand...
Click to collapse
yeah, completely flashed but it says failed in odin for some reason.
skrcer1 said:
yeah, completely flashed but it says failed in odin for some reason.
Click to expand...
Click to collapse
Do you have Teamviewer on your pc, i can help you from here if you want that. If so install TeamViewer and let me know.
This method never fails actualy:
Have you disabled Kies in windows task manager?
- Pull the battery, wait 20 seconds and boot in to downloadmode
- Place the .md5 file in AP, connect the phone with usb and untick Auto Reboot in Odin 3.09
- Flash the rom, pull the battery, boot into recovery and factory reset and wipe cache
- Reboot.
gee2012 said:
Do you have Teamviewer on your pc, i can help you from here if you want that. If so install TeamViewer and let me know.
This method never fails actualy:
Have you disabled Kies in windows task manager?
- Pull the battery, wait 20 seconds and boot in to downloadmode
- Place the .md5 file in AP, connect the phone with usb and untick Auto Reboot in Odin 3.09
- Flash the rom, pull the battery, boot into recovery and factory reset and wipe cache
- Reboot.
Click to expand...
Click to collapse
yes, i tried that, i downloaded team viewer can you private message me?
skrcer1 said:
yes, i tried that, i downloaded team viewer can you private message me?
Click to expand...
Click to collapse
I started TeamViewer, start yours and give me your Partner-ID through PM
This problem is still happening, anyone else know what may be the problem? It seems as if it is Chinese, could it be a fake?
skrcer1 said:
This problem is still happening, anyone else know what may be the problem? It seems as if it is Chinese, could it be a fake?
Click to expand...
Click to collapse
If you bought yours from a reputable seller, you don't have to worry about this but there are some fake galaxy s5 around. There are some differences that you can observe.
Hopefully this is not the case with yours.
tookie015 said:
If you bought yours from a reputable seller, you don't have to worry about this but there are some fake galaxy s5 around. There are some differences that you can observe.
Hopefully this is not the case with yours.
Click to expand...
Click to collapse
Well I bought it from amazon. It seemed legit and it looks legit for the most part except the sticker on the inside behind the battery where it says g900f is in Chinese and I heard its not supposed to be.
And I teamviewed with gee , he made sure everything in Odin was set up correctly. It was, we thought maybe the file was corrupt so I download it again from another source and it didn't help.
Any ideas on how I can fix this assuming it is not. Fake?

FAILED flashing a custom ROM.

I tried to root my device (Samsung Galaxy Note 3 SM-N9005) and it went quite well.
Then I tried to flash a custom rom (Darkwolf S7 edge port) on my phone but I ended up in a bootloop where it was stuck on the samsung logo for hours.
I tried different stuff to get out of it but nothing worked so I decided to flash the stock rom onto my phone and at the odin status I get "FAIL". And on my device it shows "Volume Size is too big 4620289 < 4718599. And my phone is unusable. I need some help asap to fix it.
Please Help!!!
What is the phone model?
You used a stock ROM from sammobile.com in Odin?
audit13 said:
What is the phone model?
You used a stock ROM from sammobile.com in Odin?
Click to expand...
Click to collapse
My phone is a Samsung Galaxy Note 3 SM-N9005.
Yes,I used a stock ROM from sammobile.com in Odin.
But I get "FAIL!" over and over again...with the message,"Volume size is too big......",on my phone.
Have you tried using different version of Odin, different USB cables, and USB ports? You may need to flash the stock ROM with a pit file.
audit13 said:
Have you tried using different version of Odin, different USB cables, and USB ports? You may need to flash the stock ROM with a pit file.
Click to expand...
Click to collapse
I've tried everything except for using a pit file. I don't really know much about using a pit file so I'm a bit apprehensive.
Could you help?
I have the exact same problem, but without the volume thing, I need help!
BarryAllen97 said:
I have the exact same problem, but without the volume thing, I need help!
Click to expand...
Click to collapse
Hey there Flash!! xD
Its a pain..isn't it?
Anyway I figured out how to fix the phone finally...
You'll need to flash the custom ROM with the PIT,CP,AP, and CSC files.
Here's the link...http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
>Download the file suitable for your phone and specific model...Extract those files.. BE VERY CAREFUL TO CHOSE YOUR SPECIFIC MODEL!!!
>Launch Odin...
>Put you phone in Download mode and connect it...
>Load the PIT,CP,AP and CSC files in their respective slots..
*DON'T FORGET TO CHECK THE "RE-PARTITION" OPTION*
>And then hit the "start" button and pray...IT WORKS!!!
However this will erase EVERYTHING on your phone...all the user data...if you have some photos/videos/songs/EVERYTHING...your sd card should be safe though.
I hope this works for you...it worked for me..
Let me know if it does!! Have a nice day!!
kurosaki999 said:
I've tried everything except for using a pit file. I don't really know much about using a pit file so I'm a bit apprehensive.
Could you help?
Click to expand...
Click to collapse
..
audit13 said:
Have you tried using different version of Odin, different USB cables, and USB ports? You may need to flash the stock ROM with a pit file.
Click to expand...
Click to collapse
hey thanks man...it did help..
flashed the stock rom with the pit,ap,csc files and finally got out of the bootloop..
I really appreciate the help!

software update failed sm910v

I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
davekaz said:
I tried downgrading after looking everywhere for a possible problem with odin.. I was on the latest cpg2 and odined the bp1 firmware for 5.1 and it stuck on rpm or something like that forgive me but i cant recall..I pulled it after 20 min and then got a software update error..and no matter what firmware i tried to put on its stuck on get pit for mapping.. My computer sees it as a device MSM8960.. So kies ng. Odin works but cant pass pit Please anyone i know with latest update I should not of done this..I even tried latest firmware it was on but same error
Click to expand...
Click to collapse
Restart pc and try latest firmware again
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82[/QUOTE
Thanks again
placing a specific pit fit got me pass map and now gets stuck at hlo bin.. I think the downgrade firmware changed something cause windows sees phone as device called msm8960 . Odin sees it as far as a com port but beyond that its not a 910v anymore
Click to expand...
Click to collapse
Try different odin version and different usb cable
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try different odin version and different usb cable
Click to expand...
Click to collapse
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
davekaz said:
I tried several versions of odin and its definitely not cord
Thanks again
Click to expand...
Click to collapse
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Trex888 said:
Try this method if your bootloader is unlocked or you got developer edition n910v.
Flash twrp in odin
Make complete wipe 3× 3 times
(dalvik cache/data/cache/system/internal storage)
After wipe go to download mode
Close odin and open again as (run as administrator)& upload firmware (AP)
Hit start Flash firmware
After flash firmware DONT LET THE PHONE BOOT
go to recovery
Wile cache & data factory reset
Reboot & wait 5 to 10 minutes.
Report back
Click to expand...
Click to collapse
thanks for trying but I just bought the phone and was trying to downgrade to unlock..so dont think twrp will take..
I appreciate all you help but im screwed
Click to expand...
Click to collapse
Click to expand...
Click to collapse
davekaz said:
Trex888 said:
Restart pc and try latest firmware again[/QU
THANKS FOR REPLY ive tried every imaginable firmware for it including newest it was on and still get pit error
Click to expand...
Click to collapse
Did you solve your issue?
Click to expand...
Click to collapse
I did it..! SOLVED..!
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
Trex888 said:
davekaz said:
Downliad repair firmware from link below
This will comes with pit file
Flash repair firmware with pit file and hopefully this will solve the issue.
Make sure download correct firmware for your model.
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Click to expand...
Click to collapse
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
alca00 said:
Trex888 said:
I did it..! Using this repair firmware, I have repaired my Samsung N910V. Many thanks to Trex888..! I just flashed it by Odin using this file, and I hope this can help others with same issue (soft bricked Note4 N910V).
Thanks a lot again Trex888..!
Click to expand...
Click to collapse
Congrats ! Glad to hear that .
Click to expand...
Click to collapse
Click to expand...
Click to collapse
alca00 said:
davekaz said:
Did you solve your issue?
Click to expand...
Click to collapse
yes it was the damned usb cord..Lol everything went smooth after that
Thanks to all
Click to expand...
Click to collapse
I had same issue, fail on all firmware (Verizon Note 4), changed usb cord, flashed back to stock and was even able to downgrade (5.0.1).
Pls help me out guys.....my two weeks old samsung note 4 is stock on Software Update Failed
Your device didnt update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update.
My phone details:
Model: SM-N910V
SKU: SMN910VZKE
Thanks.
Does anyone have this file? The page is dead.
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Sumupali said:
Dear all,
i got a samsung Note 4 . Device had a sticker SM-910 F with matching imei on software. One day I hard rest my device then it imei shows Null and it became restart after 1 to 2 minutes in lop. this device has Verizon mother board. and also do not show the usb cable option. I want to install Verison stock firmware but no device detected in odin. Kindly anyone help me to install firmware through SD
Click to expand...
Click to collapse
A 910F with a Verizon mobo?
Might be tricky to flash.
You can access download mode?
Tried different cables / USB ports?
I really doubt that you can flash stock ROM from SD when phone is boot looping.
Maybe with terminal but you would have to flash TWRP for that first.

Phone bricked and Odin always gets stuck at system.img

I tried installing UK firmware on my Galaxy S8+ using Odin, but it got stuck at system.img and now I can only boot the phone into download mode.
I've tried installing the original firmware as well but it also gets stuck at system.img.
Has this happened to anyone else? And is there anything I can do to fix this or am I ****ed?
Thank you very much in advance for any help
Did you use the most recent version of Odin (v3.13.1) ?
ruben1515 said:
Did you use the most recent version of Odin (v3.13.1) ?
Click to expand...
Click to collapse
Yep
nocuna said:
Yep
Click to expand...
Click to collapse
Did you select all files at once?
ruben1515 said:
Did you select all files at once?
Click to expand...
Click to collapse
Yeah I did.
I've spent half the day trying to fix this, but it actually seems to be hard bricked.
All I wanted was the Pie Beta
If your Odin and files are right it might be the cable, if you're not using the original cable it causes that it happend to me many times. Hope this helps you
nocuna said:
Yeah I did.
I've spent half the day trying to fix this, but it actually seems to be hard bricked.
All I wanted was the Pie Beta
Click to expand...
Click to collapse
Try nand erase pit within Odin , hopefully this could bring it back ..
riseofsand said:
If your Odin and files are right it might be the cable, if you're not using the original cable it causes that it happend to me many times. Hope this helps you
Click to expand...
Click to collapse
I just bought a Galaxy S9 so I'll try to flash using that cable. Thank you!
Scorpionea said:
Try nand erase pit within Odin , hopefully this could bring it back ..
Click to expand...
Click to collapse
I'll try that thanks, what does it do?
nocuna said:
I'll try that thanks, what does it do?
Click to expand...
Click to collapse
Well that is a very dangerous process and should not be done if u dont have any major issue but since u have pretty much death phone as u say it cant hurt to try as a last option.
Google what nand erase is in odin option,it will explain much better then me [emoji14]
Wish you all luck
Edit : try and see if u can find any emergency firmware aka repair firmware for you s8 if it exists and flash with that
Scorpionea said:
Well that is a very dangerous process and should not be done if u dont have any major issue but since u have pretty much death phone as u say it cant hurt to try as a last option.
Google what nand erase is in odin option,it will explain much better then me [emoji14]
Wish you all luck
Click to expand...
Click to collapse
I've tried it now, same result as always :/
In download mode it says OEM LOCK: ON, could that be the reason why?
nocuna said:
I've tried it now, same result as always :/
In download mode it says OEM LOCK: ON, could that be the reason why?
Click to expand...
Click to collapse
Since u trying to flash samsung official firmware it shouldn't matter. Dont know what to advice as u tried pretty much everything i would do.
Maybe someone with more insights and knowledge what to do could help you but dunno.
Search the web all i can say.
Can u boot into the recovery? Maybe try to flash twrp and format everything from there ?
Scorpionea said:
Since u trying to flash samsung official firmware it shouldn't matter. Dont know what to advice as u tried pretty much everything i would do.
Maybe someone with more insights and knowledge what to do could help you but dunno.
Search the web all i can say.
Can u boot into the recovery? Maybe try to flash twrp and format everything from there ?
Click to expand...
Click to collapse
I think I've gone through every forum post and article on the internet about the issue, can't seem to find a solution.
Can't boot into recovery either, only download mode. I'll keep trying and I'll see if I can send it in for repair.
Thanks for your help, really appreciate it.
nocuna said:
I think I've gone through every forum post and article on the internet about the issue, can't seem to find a solution.
Can't boot into recovery either, only download mode. I'll keep trying and I'll see if I can send it in for repair.
Thanks for your help, really appreciate it.
Click to expand...
Click to collapse
Have you fixed it already? If not try flashing everything with odin and also in 'Pit' tab put dreamlte .pit file from inside CSC .md5 file(open with rar)
Double check your files make sure you're not flashing an old fw and your Odin
After that, you probably try to flash using a non original data cable, its not a must but some cables can cause that
badaboomBURP said:
Have you fixed it already? If not try flashing everything with odin and also in 'Pit' tab put dreamlte .pit file from inside CSC .md5 file(open with rar)
Click to expand...
Click to collapse
I'll try that, thank you
riseofsand said:
Double check your files make sure you're not flashing an old fw and your Odin
After that, you probably try to flash using a non original data cable, its not a must but some cables can cause that
Click to expand...
Click to collapse
I've triple-checked everything. Both Odin and the files are all up to date, and the files are from the same firmware I had on the phone before it got bricked.
I'm going to try using firmware from SamMobile instead of SamDB.org, and will post back with results.
UPDATE:
Flashed firmware from SamMobile, it went through and my phone works again. Can't believe I spent $7 on SamDB for faster download speed and all I got was some files that don't even work properly. Next time I'll be more patient I guess

Note 4 flashing stock rom

Hi, i've beet trying to flash stock rom via odin and I always keep getting fail, now i can't use my phone, because it won't boot. I've downloaded the right file for the right model SM-N910C and at the end of the flash i just get fail, i flash on ap. Tried all the usb sockets on my computer, noting changed. When i try to power up the phone it says: " Firmware update encountered an issue. Please select recovery mode in Kies & try again." Tried 2 different roms and still nothing. Please help, i really need the phone asap
EmiliuxPlayz said:
Hi, i've beet trying to flash stock rom via odin and I always keep getting fail, now i can't use my phone, because it won't boot. I've downloaded the right file for the right model SM-N910C and at the end of the flash i just get fail, i flash on ap. Tried all the usb sockets on my computer, noting changed. When i try to power up the phone it says: " Firmware update encountered an issue. Please select recovery mode in Kies & try again." Tried 2 different roms and still nothing. Please help, i really need the phone asap
Click to expand...
Click to collapse
Where did you download firmware from?
Which did you take (name it)?
Was it multipart or single part ROM?
(probably single as you only named AP slot)
Which Odin version used?
bmwdroid said:
Where did you download firmware from?
Which did you take (name it)?
Was it multipart or single part ROM?
(probably single as you only named AP slot)
Which Odin version used?
Click to expand...
Click to collapse
i am facing the same problem with my Samsung Note 4 SM-N910C
i tried to reflashed it with stock rom. i have tried few stock rom and none of them worked, tried changing the usb slots but no luck. tried using odin 3.07, 3.09, 3. 10, 3.13. phone is bricked now. what to do?
rafayet1159 said:
i am facing the same problem with my Samsung Note 4 SM-N910C
i tried to reflashed it with stock rom. i have tried few stock rom and none of them worked, tried changing the usb slots but no luck. tried using odin 3.07, 3.09, 3. 10, 3.13. phone is bricked now. what to do?
Click to expand...
Click to collapse
Smart Switch for PC maybe?
rafayet1159 said:
i am facing the same problem with my Samsung Note 4 SM-N910C
i tried to reflashed it with stock rom. i have tried few stock rom and none of them worked, tried changing the usb slots but no luck. tried using odin 3.07, 3.09, 3. 10, 3.13. phone is bricked now. what to do?
Click to expand...
Click to collapse
Have you searched that forum?
As you own an Exynos phone while mine is Snapdragon I might not be able to help more.
bmwdroid said:
Have you searched that forum?
As you own an Exynos phone while mine is Snapdragon I might not be able to help more.
Click to expand...
Click to collapse
I tried also
tried with smart switch and i get this error
w41ru5 said:
Smart Switch for PC maybe?
Click to expand...
Click to collapse
bro i tried
@rafayet1159 you didn't say if flashing multiple part stock doesn't work either.
How do you define bricked?
bmwdroid said:
@rafayet1159 you didn't say if flashing multiple part stock doesn't work either.
How do you define bricked?
Click to expand...
Click to collapse
not able to connect it with pc
windows says unrecognized usb. i tried flashing multiple stock files still no luck
rafayet1159 said:
not able to connect it with pc
windows says unrecognized usb. i tried flashing multiple stock files still no luck
Click to expand...
Click to collapse
KIES installed or just SAMSUNG_USB_Driver_for_Mobile_Phones?
If the device manager said unrecognize usb then try to download the driver from Samsung Open Source. If it isn't working, try another cable (you can borrow it from one of ur friends)
bmwdroid said:
KIES installed or just SAMSUNG_USB_Driver_for_Mobile_Phones?
Click to expand...
Click to collapse
already tried
AsrieltheGoat said:
If the device manager said unrecognize usb then try to download the driver from Samsung Open Source. If it isn't working, try another cable (you can borrow it from one of ur friends)
Click to expand...
Click to collapse
tried but no luck
@rafayet1159 checked USB port on device?
Cleaned contacts?
Even if charging is working, data contacts can by dirty.
Different PC not working either?
bmwdroid said:
@rafayet1159 checked USB port on device?
Cleaned contacts?
Even if charging is working, data contacts can by dirty.
Different PC not working either?
Click to expand...
Click to collapse
treid different pc cable cleaned port etc this problem showed up when i tried to flash stock rom after that not able to access my phone anymore
rafayet1159 said:
treid different pc cable cleaned port etc this problem showed up when i tried to flash stock rom after that not able to access my phone anymore
Click to expand...
Click to collapse
Silly question: battery is full?
bmwdroid said:
Silly question: battery is full?
Click to expand...
Click to collapse
yes. i dont know how to fix this problem. not able to use my phone for long time
rafayet1159 said:
yes. i dont know how to fix this problem. not able to use my phone for long time
Click to expand...
Click to collapse
As long as you can't access download mode I don't see a chance.
Perhaps other can help better if you post your question in the special Note4 Exynos forum.
bmwdroid said:
As long as you can't access download mode I don't see a chance.
Perhaps other can help better if you post your question in the special Note4 Exynos forum.
Click to expand...
Click to collapse
Let me try
bmwdroid said:
As long as you can't access download mode I don't see a chance.
Perhaps other can help better if you post your question in the special Note4 Exynos forum.
Click to expand...
Click to collapse
can you give me the link of the forum?

Categories

Resources