My rooted XT1641 32GB is from Koodo Canada. Current ROM: Stock 8.1.0 (athene-8.1.0-OPJ28.111-22).
HWInfo app gave me this. Notice: Machine=armv7l. ABI=armeabi-v7a.
But Google says: "The Qualcomm Snapdragon 617 MSM8952 is a mid-range ARMv8-based SoC".
Is that because of my Provider-ROM ? Important though since gApps and apk depend on. Could somebody check with your version please. Thank you.
............................................
SOC
SoC Snapdragon 617
CPU msm8952
Vendor Qualcomm
Cores 8
big.LITTLE 2 clusters
Clusters 4 x 1.52 GHz
4 x 1.21 GHz
Family Cortex-A53
Machine armv7l
ABI armeabi-v7a
Instructions swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 evtstrm
Process technology 28 nm
Revision r0p4
Clock speed 806 - 1516 MHz
Governor interactive
GPU Adreno (TM) 405
Vendor Qualcomm
OpenGL ES 3.2 [email protected] ([email protected], I47556f00c5) (Date:04/30/18)
Clock speed 240 - 550 MHz
Though the Snapdragon 617 is 64 bit capable, the stock ROM (including TWRP flashables) is 32 bit in nature (likely a reason for the armv7 architecture shown, which is the same in my G4 Plus). Hence on stock firmware, you'll need 32 bit apps.
If you're wanting to make use of the 64 bit capability, you'll need a 64 bit TWRP and a 64 bit custom ROM, along with 64 bit (ARM-64) GApps.
Related
Hardware
System chip:
Qualcomm Snapdragon S1 MSM7227A
Processor:
Single core, 1000 MHz, ARM Cortex-A5
Graphics processor:
Adreno 200 (enhanced)
System memory:
512 MB RAM
Built-in storage:
1 GB
Storage expansion:
microSD, microSDHC up to 32 GB
--------------------------------------------------------------------
any custom ROM. any Generic Firmware or any other tips?
Hi, my english isn´t very good but i hope you understand, here i go.
I buy a chinese Note 4 and i need help to find and flash a new room, these are my model info:
MediaTek MT6572 1.00 GHz
Cores: 2
Architecture: 2x ARM Cortex-A7 @ 1.00 GHz
Revision: r2p1
Process: 28nm
Clock Speed: 598 MHz - 1.00 GHz
GPU Vendor: Qualcomm
GPU Renderer: Adremo(TM)330
Scaling Governor: hotplug
Model: Samsung Galaxy Note 4 Duos (N9100)
Brand: samsung
Board: rtech72_we_72_kk
Hardware: mt6572
Screen Size: 5.70 inches
Screen Resolution: 540 x 960 pixels
Screen Density: 193 dpi
Dimensions: 153.5 x 78.6 x 8.5 mm
Weight: 175 g
Total RAM: 1860 MB
Internal Storage: 1.27 GB
Release Date: 2014-10-01
Android Version: 4.4.2
API Level: 19
Bootloader: unknown
Build ID: ALPS.KK1.MP6.V1
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.0-1273465(G900SKSU1AND3)
Root Access: No
Thanks for reading
I'm pretty sure that is not a Samsung Note 4....
Almost every line does not match the Samsung specs...
Hi all,
I've bought a sympatic Android car autoradio on Android 4.4. I've succesfully rooted it via Kingroot, replaced by SuperSu, but I don't know where I can found a cimpatible CWM or other recovery.
Here is the specs of the tablet (via CPU-Z):
Cores: 4
Architecture: 4x ARM-Cortex A7 @ 1.60GHz
Revision: r0p3
Clock Speed: 166 MHz - 1.60 GHz
CPU 0: 1600 MHz
CPU 1: 1600 MHz
CPU 2: stopped
CPU 3: stopped
CPU Load: 5%
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
GPU Load: 0%
Scaling Governor: userspace
Model: AC8227
Manufacturer: ATC
Brand: Android
Board: Unknown
Hardware: autochipsac83xx
Screen Size: 7066,53 inches
Screen Resolution: 800x400 pixels
Screen Density: 0dpi
Toal RAM: 835MB
Available RAM: 196MB (23%)
Internal Storage: 0,29 GB
Available Storage: 0,17GB (58%)
Android Version: 4.4.4
API Level: 17
Bootloader: unknown
Build ID: JDQ39E.V3.10.02-20160711
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.35 (V3.10.02-20160711)
Root Access: Yes
System Uptime: 00:07:09
Click to expand...
Click to collapse
I need a recovery for flashing Gapps, principaly for the Play Store. simply install a Play Store apk doesn't work, install a modded version via Lucky Patcher does'nt work...
Have you any idea please?
Bought this off bay market with fake 8.1 but it's really a kitkat. Can't find info anywhere maybe due to it's age. Hoping someone here has similar one before upgrading.
Device info:
Labels on MB: ZH5005MAIN-MIPI-PCB
l2017-12-29 V01
K3_20180627
K3_V2.0-01C3
SMT_D_B_M_Q_
Chips label:
MUC: EW3036AC
MT6627N
GM71508C
MT6323GA
MT6166V
MT6682V
Device info from app:
Model: K6_01_IH (yk858_emmc_wcdma)
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V10, 2014/05/13 18:15
RIL Version: Not Available
Build Number: ALPS.KK1.MP1.V2.11
Build Fingerprint: alps/yk858_emmc_wcdma/yk858_emmc_wcdma:4.4.2/KOT49H/1533356118:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Kitkat (8.1)
SDK: 19
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: yk858_emmc_wcdma
Chipset: MT6582
Cores: 4
Clock Speed: 598 MHz - 1300 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: hotplug
Kernel Version: 3.4.67
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-400 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
I have a similar unit to yours. The "brand name" is YODY and i cant find any info on it. Its running fake 6.0. I found it has root but only in terminal emulator. I dont know a whole lot about mediatek units but they seem very different compared to other android phones i've messed around with so i've been reading up on them before i try to do anything to it. I would like to get full root and install viper and boost the mic gain. An upgrade to 8.1 would be great but i cant find firmware. I think whatever we do we will have to do it all on our own. Anyways here are some of my specs:
Model
K6_02_GH
System K6_02_GH_V2.0.1_20181128
Kernel
3.4.67
MCU
CM_0.7786.0_180307_15:14
App
MT1002_V1.0.9
SoC
MT6582
Board
yk858_emmc_wcdma
BuildID
ALPS.KK1.MP1.V2.11
eng.liuyang.1543395062
Firmware options
Do a search for the Ezonetronics RM-CT0011. There are 2 or 3 versions of firmware on a russian site. I've tried them, they're nothing spectacular with no real improvements on the known bugs. I'm currently using a version dated 2018-05-05
Hi guys, need help with a unit I have got.
Says it an android 10 but I don’t trust it as it come up with android 6 when installing apps from the play store.
Need help identifying what the actual unit is and what android firmware I can run on it.
how to root the device and fix a problem with the sd card not being able to be reformatted from photos etc to internal storage(don’t have the 3 dots to format)
Hmi:ZYHC.D.Q.3.05.11.16.08.30
Mcu: ts907.190518(H)
Media: hc_v2.0.0_190923_1100e(v1.40)
Btv: BT.19.11.12.1200
Many thanks
Edit:
Managed to pull this from droid info:
DROID INFO REPORT
DEVICE
Model: FF-5000 (FF-5000)
Manufacturer: alps
Baseband Version: Not Available
RIL Version: Not Available
Build Number: FF_8227L_10
Build Fingerprint: alps/full_8227L_demo/8227L_demo:8.1.0/O11019/1571038753:userdebug/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O MR1 (10)
SDK: 27
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: unknown
Chipset: AC8227L
Cores: 4
Clock Speed: 598 MHz - 1118 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU Governor: interactive
Kernel Version: 3.18.79
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-450 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
RAM
Total: 1950 MB
Java Heap: 192 MB
STORAGE
Internal: 12 GB
External: 58 GB
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology:
Health: Good
SENSORS
Not Available