Database Users

[Q] NEED HELP!!!!! note 3 sm n900

good day,
i need help because my samsung sm n900 clone(chinaphone) is currently not opening or starting up(most probably bricked). and i dont have any back up.
before bricking i have a post, this is the only info i got
in AnTuTu:
BASIC INFO:
brand: samsung
model: samsung galaxy note3(sm-n900)
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
cpu model: my6589
render: adreno(tm)330
resolution: 1080X1920
rear camera: 12.8 mega pixel 4128X3096
imei: xxxxxxxxxxxxxxx
STORAGE:
ram: total: 466mb / available: 74mb
system storage: total: 1.27gb / available: 0.95mb
internal storage: total: 1.26gb / available: 1.23gb
CPU:
cpu model; mt 6589
type: 32-bit
cores: 4
frequency: 300.00~2265.6 mhz
architecture: arm cortex-a7
DISPLAY:
render: adreno(tm)330
vender: qualcom
gpu version: opengl es 3.0 / [email protected] / [email protected]([email protected])
resolution: 1080X1920
density: 480 dpi
CAMERA:
rear camera: 12.8 mega pixel / 4128X3096
front facing camera: 2.1 mega pixel / 1920X1080
OS:
android: 4.2.2(32-bit) (but in about device it says 4.4.2)
android sdk version: 18(android 4.4.2)
kernel: linux version 3.4.0-1973843([email protected])(gcc version 4.7(gcc)) #1 smp preempt fri nov 15 14:22:43 kst 2013
if someone has the same device as my device please share your backup so i cant flash my device again.
what should i do. please help me in this problem.
thanks in advance

Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers, even its a clone of Note 3.
Stand by
Good luck

Need help to find a compatible recovery

Hi all,
I've bought a sympatic Android car autoradio on Android 4.4. I've succesfully rooted it via Kingroot, replaced by SuperSu, but I don't know where I can found a cimpatible CWM or other recovery.
Here is the specs of the tablet (via CPU-Z):
Cores: 4
Architecture: 4x ARM-Cortex A7 @ 1.60GHz
Revision: r0p3
Clock Speed: 166 MHz - 1.60 GHz
CPU 0: 1600 MHz
CPU 1: 1600 MHz
CPU 2: stopped
CPU 3: stopped
CPU Load: 5%
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
GPU Load: 0%
Scaling Governor: userspace
Model: AC8227
Manufacturer: ATC
Brand: Android
Board: Unknown
Hardware: autochipsac83xx
Screen Size: 7066,53 inches
Screen Resolution: 800x400 pixels
Screen Density: 0dpi
Toal RAM: 835MB
Available RAM: 196MB (23%)
Internal Storage: 0,29 GB
Available Storage: 0,17GB (58%)
Android Version: 4.4.4
API Level: 17
Bootloader: unknown
Build ID: JDQ39E.V3.10.02-20160711
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.35 (V3.10.02-20160711)
Root Access: Yes
System Uptime: 00:07:09
Click to expand...
Click to collapse
I need a recovery for flashing Gapps, principaly for the Play Store. simply install a Play Store apk doesn't work, install a modded version via Lucky Patcher does'nt work...
Have you any idea please?

[Huawei P10] What to kown for custom ROM?

Hello.
New to this but learned som by getting another of my tablet bricked, So thought i migt asks for some pointers this time with the second one!
The ting is that this device have had issues with like flickering lines on display even from when logo in loading screen first show and when system is loaded.
Some times more and some time less, ut alwys som darker thats perment on right side of display.
Buyt the tablet from China so never thought it where worth sending it back,
This started the same day i started to use it.
Tryed Wipe cashe and restore in Recover Mode.
Wonder if it maybe will be fixed with a new fresh install with an custom rom?
Any pointers to what rom that would work for my device?
DevCheck Report from Device:
HARDWARE
Mediatek
Hardware: MT6580
Cores: 10
null
Process: 28 nm
Frequencies:
604 MHz - 2000 MHz
Not available
Not available
Governor: interactive
GRAPHICS
Vendor: ARM
GPU: Mali-400 MP
OpenGL: OpenGL ES 2.0
Resolution: 1280 x 800
Screen density: 212.8966 ppi
Screen size: 7.09 in / 180 mm
RAM
RAM size: 6.0 GB
Type: LPDDR2 533 MHz
Bandwidth: 4.3 GB/s
Channels: 32-bit single channel
OTHER HARDWARE
Bluetooth support: Yes
Bluetooth LE support: Yes
USB host support: Yes
Infrared transmitter: No
NFC support: No
DEVICE
Model: P10
Codename: KT107
Manufacturer: JTY
Serial Number: 0123456789ABCDEF
SYSTEM
Android Version: 8.1 (Oreo)
Build: P10_V01
Root access: Device is rooted
Architecture: armv7l (32-bit)
Instruction sets: armeabi-v7a armeabi
Kernel: 3.10.72+ #1
[email protected]
gcc version 4.8 (GCC)
Fri Sep 21 19:35:43 CST 2018
BATTERY
Technology: Li-ion
Health: Good
Capacity (reported by system): 5000 mAh
NETWORK
MAC address: 20:72:0d:39:1d:bb
5GHz band support: No
CAMERA
Resolution: 13.0 MP (4160x3120)
Focal length: 3.5 mm
35mm equivalent focal length: 28.3 mm
Sensor size: 4.29x3.19 mm
Crop factor: 8.1x
Field of view: 63.0°
Pixel size: 1.02 μm
RAW mode: Supported
Front Camera: 4.9 MP (2560x1920)

What is this version??? 8227L_demo haoling_00009_V001_20191128

Is anybody know what is this version of my Firmware?
haoling_00009_V001_20191128 I have problem with my Feder-balance Icon on the Audio setting page.
Thank!
Android: haoling_00009_V001_20191128
Android os: 9.1 XY AUTO: 3.1 (8227L)
CAN Pro: 3.0 (8227L)
DDR: 2G FLASH: 32G
cpu: A7 1.3GHz X 4
display: 1024*600
MCU: 3.1 (8227L)
CORTEX ARM Cortex-A7
Cores: 4
Architecture: 4X ARM Cortex-A7 @ 1.12Ghz
Revision: r0p3
Clock speed:
CPU0: 1118MHz
CPU1: 1118MHz
CPU2: 1118MHz
CPU3: 1118MHz
CPU Load: 99%
GPU Vendor: ARM
GPU Renderer: Mali-450 MP
GPU Load: 0%
Scaling Governor: performance
DEVICE:
Model: 8227L_demo_(full_8227L_demo)
Manifacturer: alps
Board: Unknow
Hardware ac8227l
Screen Size 7.42 Inches
Screen Resolution: 1024*600
Screen Density: 159 dpl
Total RAM: 1024 MB
Avaliable RAM: 609 MB (59%)
Internal Storage: 26.58 GB
Avaliable Storage: 18.91 GB (71%)
SYSTEM:
Android Version: 8.1Go
API Level: 23
Security Patch Level: 2017-11-05
Bootloader: Unknow
Java VM: ART 2.1.0
OpenGL WS: 2.0
Kernel Architecture: armv7l
Kernel Version: 3.18.22(1574920303)
Root Access: No
Google Play Service: 20.04.14 (040300-294335909)
System Uptime: 2 days 02.03.56

i have this same firmware.No fader/balance etc.Im still waiting for ota.Maybe in future

fergeteg said:
Here is the linkhttp://www.mediafire.com/folder/sa41gjayjje91/YT9213A_Update
Click to expand...
Click to collapse
YT9213A works for me
YT9213AJ don't work...
---------- Post added at 11:28 PM ---------- Previous post was at 11:27 PM ----------
Please make a Backup of your unit.
I haven't... ?

Need help with identifying unit

Hi guys, need help with a unit I have got.
Says it an android 10 but I don’t trust it as it come up with android 6 when installing apps from the play store.
Need help identifying what the actual unit is and what android firmware I can run on it.
how to root the device and fix a problem with the sd card not being able to be reformatted from photos etc to internal storage(don’t have the 3 dots to format)
Hmi:ZYHC.D.Q.3.05.11.16.08.30
Mcu: ts907.190518(H)
Media: hc_v2.0.0_190923_1100e(v1.40)
Btv: BT.19.11.12.1200
Many thanks
Edit:
Managed to pull this from droid info:
DROID INFO REPORT
DEVICE
Model: FF-5000 (FF-5000)
Manufacturer: alps
Baseband Version: Not Available
RIL Version: Not Available
Build Number: FF_8227L_10
Build Fingerprint: alps/full_8227L_demo/8227L_demo:8.1.0/O11019/1571038753:userdebug/test-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O MR1 (10)
SDK: 27
DISPLAY
Resolution: 1024x600 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 60 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: unknown
Chipset: AC8227L
Cores: 4
Clock Speed: 598 MHz - 1118 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU Governor: interactive
Kernel Version: 3.18.79
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-450 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
RAM
Total: 1950 MB
Java Heap: 192 MB
STORAGE
Internal: 12 GB
External: 58 GB
FEATURES
Bluetooth: Yes
Bluetooth LE: Yes
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology:
Health: Good
SENSORS
Not Available