My phone is Asus zenfone max-ZC550KL-16GB with 8916 cpu. My phone was hard bricked and shown as "QUALCOMM HS-USB QDLoader 9008"'.
After several attempts finally i recovered my phone to working condition. But the problem is while booting it shows factory mode with lot of deails like cpu, ram, etc,.
Serial number of the phone is wrong. I can't flash TWRP due to unsigned image error. so i can't root..Phone booting with factory mode symbol only.
Now my phone connects with pc as like this only.
Qualcomm HS-USB Diagnostics 9025 (COM49)
Qualcomm HS-USB NMEA 9025 (COM9)
ADB Interface with yellow triangle !!
Please someone help me to get rid of this factory mode!!! status of Phone photo as below address
imgur.com/VgrbWRB
imgur.com/LHPXfrB
Can anyone have full dump of above model?..Please help me...
kishravi2007 said:
Can anyone have full dump of above model?..Please help me...
Click to expand...
Click to collapse
Solved My problems. Thanks...
First Download this files from the following link
https://www.firmware27.net/2017/10/asus-zenfone-max-z010d-zc550kl-firmware.html
Then download this file Qfil ( this version only working for this files ). If you use another version of Qfil then phone will go back to dead mode(9008)
https://androiddatahost.com/jj9ye
While flashing with his tool it will write half of the files then phone will reboot and exit factory mode.
All credits goes to firmware27.net and gsm developers...
zen fone max ZC550KL factory mode
kishravi2007 said:
Solved My problems. Thanks...
Click to expand...
Click to collapse
Can you share how you solve the problem. I have the same issue on my Zenfone max.
CL
Can u suggest me any way to exit factory mode from my zc550kl msm8939 model?? cant find specific files for 8939 variant. The above method doesnt work. Sahara error. and my IMEI is set to zero after unbricking. Still in factory mode. But i managed to flash a stock firmware from asus official site. Now phone is working normal as everything in english lang and i can find it in adb command. but IMEI is zero and factory mode doesnt go. cant unlock bootloader from fastboot.
pls help
Please try this link ..all details available for you.
http://forum.gsmdevelopers.com/asus..._msm8939-flashing.html?highlight=asus+zenfone
You can get IMEI and exit factory mode for your model.
Hey how did u flash the stock rom please help
what is your device status now?...it is in 9008 mode or 9006?...
Well i have successfully installed the stock rom but my phone shows baseband version as unkown and wifi is not working but when i was in factory mode they were working fine... Qfil now is not recognizing the phone and my bootloader is locked and i am confused now..
My mobile is zenfone max msm8939 32 gb variant
Pls help thank u
flashing problem
how flash this tool or file
Hi, so i am having issues with my Tanix TX2 RK3229 2GB/16GB box , i am in the process of a paypal dispute over this but if i can find a solution myself i will be more than happy to just DIY.
Basically the box froze for no reason and now will not go further than the ANDROID screen , i can boot into recovery but the only available update i can get is the 7.1 update which fails ( for me and many others ) all other firmwares including stock are .IMG and recovery does not see them on the SDCARD, the device is NOT picked up by my PC when connected via USB to USB , so , the only way i can see past this issue ( unless a magic version of the stock firmware arises ) is to try and flash via Uart ( i assume thats possible ) but i have zero experience with tv boxes , Uart and quadcopter flight controllers Yes tv boxes Nope.
Is there a really simple set of instructions on flashing a tv box via the Uart that i can read over ? or a simple way of turning the stock firmware.img into a firmware.zipp so that the recovery can use it to flash back to stock ?
I would be grateful for any pointers in the right direction
scouse
scousethief said:
Hi, so i am having issues with my Tanix TX2 RK3229 2GB/16GB box , i am in the process of a paypal dispute over this but if i can find a solution myself i will be more than happy to just DIY.
Basically the box froze for no reason and now will not go further than the ANDROID screen , i can boot into recovery but the only available update i can get is the 7.1 update which fails ( for me and many others ) all other firmwares including stock are .IMG and recovery does not see them on the SDCARD, the device is NOT picked up by my PC when connected via USB to USB , so , the only way i can see past this issue ( unless a magic version of the stock firmware arises ) is to try and flash via Uart ( i assume thats possible ) but i have zero experience with tv boxes , Uart and quadcopter flight controllers Yes tv boxes Nope.
Is there a really simple set of instructions on flashing a tv box via the Uart that i can read over ? or a simple way of turning the stock firmware.img into a firmware.zipp so that the recovery can use it to flash back to stock ?
I would be grateful for any pointers in the right direction
scouse
Click to expand...
Click to collapse
Use Rockchip batch tool ..install drivers for rockchip from .exe from driver tool
Connect hdmi to tv ..connect to pc via usb to usb
Using a toothpick to press & hold reset button until drivers install
Run batch tool to select firmware image file & flash
http://www.filefactory.com/file/49ibxfi5euyf/RKBatchTool-v1.8.rar
Hi,
Finally there is a complete working firmware (for sp flash tools) for the bricked or in bootloop hanging SWM8802.
If you're device is working wel, then is my advice have fun with it and do not flash it!!
If there is an update from the manufacturer i will update the post with it.
For the bricked or in bootloop hanging SWM8802 follow these steps:
Code:
1) Download Firmware, sp flash tools and mt8127 vcom usb drivers from the link bellow.
2) Extract the folders.
3) Disconnect the device completely from the power!! (I use a 12v adapter to connect the device at home).
4) Open sp flash tools and choose scatter-loading File (search the one located in the swm8802 firmware folder).
5) Press download button in sp flash tools.
[B][COLOR="Magenta"][COLOR="Red"]"Keep in mind that after connecting the power (in my case adapter),
you only have 2 - 3 seconds to connect the usb cable between the device and computer.
That is why you should already connect the USB cable to the computer or the device before starting to flash"
[/COLOR][/COLOR][/B]
6) Power on you're device.
7) Connect the unit to the computer with a usb cable on the front usb port of you're device.
8) If you have done all the steps right, sp flash tool will start flashing your device.
<br>
Firmware, sp flash tools and mt8127 vcom usb drivers (all in one zip file):
https://yadi.sk/d/gZvmllBw3WeoLz
Tutorial on how to install Windows 10 mtk vcom usb drivers:
https://tehnotone.com/windows-10-mtk...tion-tutorial/
With great thanks to 4PDA for the hard work!
sandr2010
SOTSKY_A
Giabursu
AS WITH ANY UNSUPPORTED SYSTEM MODIFICATIONS, USING THIS MAY LEAD TO A BRICK.
PLEASE BE AWARE THAT NO ONE ON THE INTERNET IS RESPONSIBLE FOR ANY DAMAGE TO YOUR UNIT!!
reserved for possible possible updates ........
Working?
Since using this firmware update on the SWM8802, has it gotten bricked or stuck in a bootloop at all again? Or is it working 100% perfectly fine? Any issues you're aware of? Thanks!
The-Ace said:
Since using this firmware update on the SWM8802, has it gotten bricked or stuck in a bootloop at all again? Or is it working 100% perfectly fine? Any issues you're aware of? Thanks!
Click to expand...
Click to collapse
I have the idea that my stereo is working beter, i used the option format in SP flash tools. The only thing is that i needed to find a navigation software because the IGO wasnt there anymore.
No issues or something that i have seen or feel in this rom. The only problem is, i dont like that i can not turn off the beep from the touchscreen in the settings.
my device does not work now does not turn on, Please help with another firmware for my swm8802
thank you
Hi, I have a similar problem with my SWM 8806 unit. I follow all the steps published in this thread but the SP Flash Tool can´t download the firmware (MT8127). It seems like a problem with the Drivers. I have installed the PreLoader USB VCOM, DA USB VCOM, USB PORT and USB VCOM in a Windows 7 laptop.
This is the log:
MainWindow::CreateDLSetting(): Download sceneDOWNLOAD_ONLY).(..\..\flashtool\UI\src\MainWindow.cpp,472)
ISetting::set_stop_flag(): dummpy stop_flag(0x04D81180) set.(d:\home\mtk14060\autoscript\project\wcp2_cleanroom\da\download_agent_main\flashtool\setting\ISetting.h,45)
APCore::Connection::ConnectBROM(): Connecting to BROM...(..\..\flashtool\Conn\Connection.cpp,72)
APCore::ConnMediaUSB:reConnect(): Scanning USB port...(..\..\flashtool\Conn\ConnMedia.cpp,55)
APCore::ConnMediaUSB::Search(): Search usb, timeout set as 120000 ms(..\..\flashtool\Conn\ConnMedia.cpp,21)
USBSetting::SearchUSBPortPool(): SearchUSBPortPool failed!(..\..\flashtool\Conn\USBSetting.cpp,165)
USBSetting::Search(): Scaning USB port failed!(..\..\flashtool\Conn\USBSetting.cpp,139)
APCore::ConnMediaUSB:reConnect(): Failed to find USB port(..\..\flashtool\Conn\ConnMedia.cpp,74)
APCore::Connection::ConnectBROM(): Connect BROM failed: S_TIMEOUT(..\..\flashtool\Conn\Connection.cpp,99)
APCore::Connection:isconnect(): Disconnect!(..\..\flashtool\Conn\Connection.cpp,155)
BackgroundWorker::run(): BROM Exception! ( ERROR : S_TIMEOUT (1042)
Somebody know what I´m doing wrong ?
tks
Can anyone make video of this instruction?
I had bootloop but after Im trying this solution my device is dead after I was put usb A-A to front panel.
can you tell me me some infos about this unit before i buy ?
1] i Want to know the Antutu score of this unit
2] I want to know what GPU chip has. should be Mali400 or 450 i guess,
3] if it supports OTG
thx
samm000 said:
I have the idea that my stereo is working beter, i used the option format in SP flash tools. The only thing is that i needed to find a navigation software because the IGO wasnt there anymore.
No issues or something that i have seen or feel in this rom. The only problem is, i dont like that i can not turn off the beep from the touchscreen in the settings.
Click to expand...
Click to collapse
Hi
can you tell us how you flash the new firmware.
i have the igo backup if you want it
thank you
mihaiwasile said:
my device does not work now does not turn on, Please help with another firmware for my swm8802
thank you
Click to expand...
Click to collapse
my unit is now in the same condition....All i get now are DRAM errors...
Upgade the firmware
Hi guys
i finaly found out how to flash our cheap android 8702 player.
first of all download this https://yadi.sk/d/gZvmllBw3WeoLz
then unzip it to desktop
then go to device manager and add a divice manual choozing the one from the file you unzip Windows_10_MTK_VCOM_USB_Preloader_Drivers_tehnotone.com
instal drivers media tek da usb vcom port
and mediatek preloader usb vcom port
you will not see any new device in device manager just add the drivers
now oper the flash tool and select the scater file ftom the swm8802 firmware folder
then choose format all +download
you are ready now just klick on the green download arrow
after you do that conect the male to male usb cable to pc and to the front usb port at the player and after conect the power cable
now it start to flash the new firmware.
what i found after instaling is that the player is 4.4.4 and its faster
it is rooted
and it needs igo to be installed so copy your igo to sd before upgrade
there is also https://yadi.sk/d/nPuSTzgB3U65b2 update.zip to download if you like this is very easy to flash
just copy the update.zip to sd and go to settings / about device / locale update and click update
everything work grate to me.
good luck
sorry for my bad english
make video
can u make video to see how is working and the interface and i want to know if u can change the radio fm backround
LudaNick10 said:
can u make video to see how is working and the interface and i want to know if u can change the radio fm backround
Click to expand...
Click to collapse
It is exactly the same with the original but faster.
And it is rooted it has super user su.
You can change the background of the radio if you change the backgroud of the default launcer the same background goes to radio.
I will try to make a video just give me time
socioan said:
It is exactly the same with the original but faster.
And it is rooted it has super user su.
You can change the background of the radio if you change the backgroud of the default launcer the same background goes to radio.
I will try to make a video just give me time
Click to expand...
Click to collapse
Does this work on the swm 8802? just run the update?
Anyone tested this with 8802?
Thanks for this info, your english is not that bad!
If have been struggling to flash my swm8802, been following all the steps/downloaded the drivers/scatter files and flash tool.
Still unable to get the flash tool to run, could it be because my unit is still in the vehicle connected to power cord? Could it be that the drivers isnt installed correctly?(code 10 error with yellow sign on driver) or is it as simple perhaps the usb cable is faulty? When plugging in laptop(windows10) I dont see or hear any sign that a unit is plugged in, should I see something?
Sorry for lengthy Questions
Barnard27 said:
Thanks for this info, your english is not that bad!
If have been struggling to flash my swm8802, been following all the steps/downloaded the drivers/scatter files and flash tool.
Still unable to get the flash tool to run, could it be because my unit is still in the vehicle connected to power cord? Could it be that the drivers isnt installed correctly?(code 10 error with yellow sign on driver) or is it as simple perhaps the usb cable is faulty? When plugging in laptop(windows10) I dont see or hear any sign that a unit is plugged in, should I see something?
Sorry for lengthy Questions
Click to expand...
Click to collapse
To make flash tool to work you must first take out the unit from the car. Then have ready an external power and a usb cable plugged to the pc. Start the flash tool press download and then plug the power to the unit and immediately the usd. Flash tool must start downloading
thanks for reply on taking the unit totally out of power, I managed to get it flashed...and now the unit is dead, no button lights no screen, as if the power is totally gone. Please tel me this is the norm and i just need to keep something in for couple of seconds?
Barnard27 said:
thanks for reply on taking the unit totally out of power, I managed to get it flashed...and now the unit is dead, no button lights no screen, as if the power is totally gone. Please tel me this is the norm and i just need to keep something in for couple of seconds?
Click to expand...
Click to collapse
I just tell you what i have done.
i don't know what was the external power that you give to your unit it should be 12V and it has positive and negative
you must know what you do and do it at your risk sorry for your unit but i am writing what i have done
Barnard27 said:
thanks for reply on taking the unit totally out of power, I managed to get it flashed...and now the unit is dead, no button lights no screen, as if the power is totally gone. Please tel me this is the norm and i just need to keep something in for couple of seconds?
Click to expand...
Click to collapse
Even my unit died after the procedure that seemed to have been successful. I can't even run the procedure again as it gives me a "DRAM" error (4032). Barnard27 managed to solve the problem? Who could help me? Thank you!
I was trying to port a rom.. flashed it with something wrong in updater script and now
my asus zenfone max pro m1 is HARD BRICKED
tried all methods including the one on xda using QFIL but I get an error saying SAHARA FAILED...
is there any other way out?
Please help me in saving my device....
Hi did you manage to fix your phone? Mine also hard bricked..
Looks like you have to repartition the internal chip, then flash each partition via adb.
Also try to check if it gives red indicator when plugged in.
I flashed my x96max plus I think with wrong rom
Then it stop doing anything even the display or power, when I connect it to amlogic USB burning tool it can't recognize but after about 10 minutes it begins to recognize
I tried several versions of rom ,but not work
Could anyone help me with the right version of this bad device & what's the suitable version of burning tool
I attached pictures of all chips of the device