Hello! I'm currently working on some custom moto boot logo (not bootanim, just logo.bin which is related to the bootloader)
I'll release them soon as I can (I don't have much time)
Thumbs up if you're interested :silly:
Reserved.
Related
Hello guys, I wanted to share something I've discovered so that others will not repeat my same mistake. And yes I'm a noob
A little backstory
I have an Asian XT1033 Moto G, bootloader unlocked, rooted and using Faux's kernel. So, after reading some feedback about 5.1.1 for XT1033, I've been tempted to flash 5.1.1 over my 4.4.4.
The problem
I've downloaded the stock 5.0.2 Asia XT1033 firmware in img format, and proceeded to flash them via fastboot using Minimal ADB and Fastboot. (I tried to fastboot flash 5.0.2 stock firmware directly from 4.4.4 stock). Everything was fine, after flashing each part, Okay messages were shown. After rebooting, my Moto G booted and showed the usual "Warning Bootloader Unlocked" screen. EXCEPT, the "Warning Bootloader Unlocked" screen stayed for more than 10minutes......., I've spent the whole midnight trying to reflash back using 4.4.4 stock Asia firmwares (same stucked at warning screen), baffled, googling for similar problems encountered in hopes of a solution, but found nothing. The next day something came to my mind and I googled "the difference between fastboot and mfastboot" which led me to Mark_Venture's website, and after some reading, I first facepalmed myself hard and then screamed Eureka with my mind
What's causing this
To rephrase Mark_Venture, "fastboot is compatible with almost all Android devices, but is limited on how big the size of files it can actually flash, while Motorola have their own version called mfastboot which surpassed the file size limits of the usual fastboot", so basically when I tried to flash via fastboot, the command I've typed was "fastboot.exe flash partition gpt.bin" which is wrong and should be "mfastboot.exe flash partition gpt.bin", so basically I've used the usual fastboot.exe instead of Motorola's own mfastboot.exe. This probably explains why all the other files from the stock firmware are successfully flashed, EXCEPT the system.img_sparsechunk.0123 files due to their average sizes easily exceeding 256MB (my own take here, correct me if I'm wrong). This probably explains why rebooting after flashing via fastboot doesn't work because the system imgs are not flashed, and hence the phone get stucked at "Warning Bootloader Unlocked" screen because there is no ROM to boot to.
Alternatively, actually much more easier
You can also flash using fastboot a custom recovery, then boot into the custom recovery and either adb push or using USB OTG to install ROM zips. Personally I've used USB OTG with PhilZ Touch Recovery to install custom ROM and my phone finally boots.
TL;DR
Use mfastboot.exe instead of fastboot.exe when flashing via fastboot
Big credits to Mark_Venture and his website
Source: http://mark.cdmaforums.com/MotoX-mFastboot.htm
Great find. TIL for me too
I made a proper logo.bin to remove the unlocked message. This is from the 5.1 stock firmware, so it's the correct Motorola logo. Flash using fastboot:
Code:
fastboot flash logo logo.bin
Thanks! He had tried others and this has just like the stock bootloader
Enviado desde mi MotoE2(4G-LTE) mediante Tapatalk
ronasimi said:
I made a proper logo.bin to remove the unlocked message. This is from the 5.1 stock firmware, so it's the correct Motorola logo. Flash using fastboot:
Code:
fastboot flash logo logo.bin
Click to expand...
Click to collapse
How did you make the logo.bin? I'd like to create my own custom one, but haven't had much luck finding (or maybe understanding?) any info.
Some one have the original bootloader? after flashing this my devices restart some times and when i put it to charge, bootloader turns on
Can someone make a black background on the logo so it doesn't burn my eyes out everytime I start the phone in the dark?
Seems to work great, I flashed it when I had already flashed one of the other logo.bins.
It has a really clean smooth look to it, it seems to effect more then the boot logo, the bootloader theme seems to be stored in the logo.bin
Or the bootloader menu stores its graphics in logo.bin too and flashing a older logo.bin breaks the button graphics, I'm not sure.
I have a XT1527 that was updated with the 5.1 update (though I'm running CM now), and flashing one of the other logo.bins changed my bootloader menu graphics in a minor cosmetic way,
flashing this didn't just mod the bootloader logo, it also restored the bootloader menu (volume down + power) button graphics to how I remember them.
_ck_ said:
Can someone make a black background on the logo so it doesn't burn my eyes out everytime I start the phone in the dark?
Click to expand...
Click to collapse
Hey i made one and flashed my Moto E rev2 (XT1527) and it seems ok.
I don't know how i can share it here though i am a new user,
what i did was i extracted the images with a white background (3x)
then i inverted the colors but replaced the Moto logo with the exact original color
then put back the original color red lines on the battery images.
then i used fastboot to flash it and i tested.
Starting from the recovery menu and on a reboot and also plugged in charging.
hooray stock logo but black
i was thinking the same thing lol
I used MotoBootLogoMaker (Custom option) with the logo posted by the OP.
The forum download link for it came up as nginx 404.
but i found the dev's github page and downloaded a compiled build v2.3.1020.0513
And i used Adobe Fireworks to make (flattened) PNG's
let me know how i am suppose to share it and i will post it.
Oh.. i don't know how to change the animated Boot Logo part though sorry..
thanks for sharing OP !
Can I flash this on Boost XT 1526 with stock 5.0.2
drshreenivaas said:
Can I flash this on Boost XT 1526 with stock 5.0.2
Click to expand...
Click to collapse
Yes, probably. There is a tool to make any logo with any Moto resolution, and after that can be flashed via fastboot.
Is there a mod for the unlocked bootloader warning like the moto x pure?
https://forum.xda-developers.com/mo...o-remove-unlocked-bootloader-warning-t3201141
basically you can over write the bootloader logo in fastboot
fastboot flash logo /path/to/logo.bin
I have just acquired a new H872. I have promptly unlocked the bootloader to prepare for rooting/ROMs. As you all know, unlocking the bootloader causes the boot logo/splash screen to display a "warning" that the system cannot be checked for corruption. Is there a way to replace that image? On all my Moto phones & my Xiaomi, I was able to. For the Moto phones it was a logo.bin that was replaced, and for the Xiaomi it was a splash.img.
I am hoping it is possible as well on the G6 H872, but I have not found any threads in regards to it.
Thanks!
Dear Experts,
I'm trying to make some boot images for the Motorola Moto G7.
Also the Moto G7 Plus, and G7 Power
The idea is to eliminate the image with the error:
"Your device has been unlocked, and can't be trusted.
To learn more, visit:
Motorola.com/unlockbootloader
ID:
Your device will boot in 5 seconds"
...
I did see this post:
Custom Logo.bin(s) for all Moto G7- get rid of root warning screens hide "bad key"
Sep 13, 2019
Custom Logo.bin(s) for all Moto G7- get rid of root warning screens hide "bad key"
Custom Logo.bin(s) for all Moto G7- get rid of root warning screens hide "bad key" Neither of these logo.bins are going to shorten the 5 second wait Motorala puts on a unlocked. Rooted phone. That is only going to happen with a custom ROM...
forum.xda-developers.com
For G7 variants
Downloaded the .bin files
Followed the instructions
It did work.
However, the resulting boot image is white.
Not blue.
Which I think looks a lot better.
...
logo.bin to remove unlocked warning and WITHOUT N/A! (flashable .bin + instructions)
Feb 28, 2018
logo.bin to remove unlocked warning and WITHOUT N/A! (flashable .bin + instructions)
Hello guys, I've created with the help of the Motorola Boot Logo Maker (https://forum.xda-developers.com/moto-g/themes-apps/app-motorola-boot-logo-maker-source-t2848667) two boot logos to remove the odd "Your device has been unlocked and can't...
forum.xda-developers.com
For Moto Z
9 different logos in various designs, and colors.
However, the screen of the Moto Z is bigger than the G7 displays
And, some responders pointed out that after installing, it was cropped.
----
Also saw this by Thiago Silva in 2015.
Customized Moto logos
Bootlogos
How to use these? For TWRP files: Just flash the ZIP in TWRP For bin files: Run these commands in fastboot fastboot flash logo_a (filename).bin fastboot flash logo_b (filename).bin
motox4custom.jimdofree.com
Great colors: Lineage green on black
But made for the Moto G, too small for the G7 variants.
And some people had trouble installing them.
AT least with TWRP
---
Q:
How can I make a custom bootlogo?
Then install it onto the G7?
Thanks a lot
Look at this post.