{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well the procedure is the same of MIUI rom, the difference is that i have builded first the rom and after converted it into a Treble AB Image.
1) Flash the firmware .48 Pie, unlock the BL and flash the Pitch Black Recovery
2) Assure that in recovery is unchecked the option "Disable DM Verity", format and wipe data, dalvik and cache and flash this force decryption - DO NOT WIPE SYSTEM OR VENDOR!
3) In the follow order flash first this boot patched for .48, then this system image and after latest Magisk.zip
4) Resize the system partition in the wipe advanced menu and reboot in system. These steps to follow are very important. You will take a bootloop but don't worry!
5) Return in recovery, flash the Permissiver V4 by ErfanAbdi and after reboot in system. New bootloop. Now return again in recovery and use the follow patch. Insert this file (by pitch black file manager) into system/system/etc/permissions (if you don't find this specific path means that don't have followed the steps correctly!) and give to it chmod 755
6) Now, at the next reboot, the rom should boot. Don't flash any zip of gapps, otherwise you will take a new bootloop.
I have realized this rom with ashusharma's trees modified by me and using the latest kernel asus .48 always patched by me, you can build other roms using these sources but remember always to convert the ROM into AB Treble Image with ErfanGSITool and apply the patches for bootloop.
That's all!!!
BUGS
Installation of Gapps or set of any security pattern lock create bootloop at reboot
Great bro, i try
wait i m having issues now....wait that finish to test and update the correct procedure
Ok issues resolved. Follow the guide step by step
fosseperme said:
Ok issues resolved. Follow the guide step by step
Click to expand...
Click to collapse
Thanks for the firmware, the only thing that doesn't work is MTP
---------- Post added at 06:31 AM ---------- Previous post was at 06:08 AM ----------
After installing the firmware, the main screen was not. In the settings I had to turn on gestures. When you open FM-Radio closes with an error
Eolvand said:
Thanks for the firmware, the only thing that doesn't work is MTP
---------- Post added at 06:31 AM ---------- Previous post was at 06:08 AM ----------
After installing the firmware, the main screen was not. In the settings I had to turn on gestures. When you open FM-Radio closes with an error
Click to expand...
Click to collapse
MTP works...you must select the mode usb in developer option
Please make it official
Link is not working
Related
Clockwork Recovery mod isn't loading when I open up ROM Manager and hit Reboot into Recovery. All I get is the (what looks to be) default Android Recovery screen with a picture of the Android robot with a ! over its head.
What gives? Is there something I missed?
I rooted my phone myTouch 4g Huahei (2.3.6) through this youtube guide @ youtube.com/watch?v=hcrl1rYcL7o (sorry, I can't post links here till I have 10 posts) and after finishing, it was rooted. At least, I think it was. All the bloatware T-Mobile had installed is still there, somehow, but Superuser is there too, so I'm not sure what state my phone is in right now. I can't seem to access Developer Options by pressing the Build Number 7 times.
How the hell do I install my ROM via zip if I can't get boot into Clockwork Recovery Mod?
May be Your phone unsuccessful root, you try root by Visionary+
Step 1: Download and install Visionary+ on your phone
Step 2: Open Visionary and check image following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Check "Temproot on boot"
-Check "Set system R/W after root"
Press "Temproot now" and wait a moment
Step 3:
Uncheck "Temproot on boot" and "Set system R/W after root"
Press Temproot Now and wait a moment
Continue to press Attempt permroot now=>Finish, may be your phone will restart
After Finish go to Rom manager and download Recovery.
Install CWM.
1.Launch Flash ClockworkMod Recovery=> Choose your device "Mytouch 4g"
2.Wait to finish download
If successful installation ,get "Successfully downloaded ClockworkMod Recovery"
Now,your phone really rooted because installed CWM=> Check back and enjoy!
hdhthed said:
May be Your phone unsuccessful root, you try root by Visionary+
Step 1: Download and install Visionary+ on your phone
Click to expand...
Click to collapse
Will this work for Huawei? Forum posts are saying it's recommended for Froyo only.
Brickbottom said:
Will this work for Huawei? Forum posts are saying it's recommended for Froyo only.
Click to expand...
Click to collapse
Dude you have a totally different phone. You might mess up.
---------- Post added at 05:29 PM ---------- Previous post was at 05:29 PM ----------
Your phone looks like --> http://www.ebay.com/itm/Pleasant-Sw...80-Faceplate-Snap-on-Phone-Case-/271330606107
Hello everybody !
If you have downgraded from Lolipop to a KitKat ROM and you have issued black screen during call, I have find the solution:
You don't need to flash the Stock ROM. Just flash a Modem from a Stock ROM, Lolipop Modem doesn't work fine on KitKat, proximity sensor is busy and the screen don't wake up during call.
You can find here the latest Stock Modem (XNPH05Q) : MEGA | MediaFire
MD5 : 2fff2a1d9719294db84b714f4389ce6f
You don't need to wipe anything and it doesn't wipe anything. Just flash it and enjoy
Reserved
Can't get it to install with TWRP. When I try to do it, TWRP restarts. On reboot still get black screen on phone call. Is it indeed flashable from recovery?
Yay, of course, it's a flashable .zip, do you use the latest release of TWRP (2.8.6.X) ?
https://dl.twrp.me/bacon/
Mmh, I try to flash and it's works fine, here a screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ataft said:
Can't get it to install with TWRP. When I try to do it, TWRP restarts. On reboot still get black screen on phone call. Is it indeed flashable from recovery?
Click to expand...
Click to collapse
Then there's something wrong with the recovery or file. Try Calkulin's modem? If it fails again I think there is something wrong with your TWRP. Btw, you need to manually fastboot erase modem in order to flash the KK modem. Last time I tried it won't let me overwrite Lollipop modem with KK modem.
http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033
I can overwrite LP modem with KK modem.
The flashable zip seems work fine on two OnePlus. I think it's his recovery who doesn't work
TWRP 2.8.6.0, haven't had any issues with it aside with this. Just tried flashing it, didn't know I needed to fastboot erase the LP modem.
Probably better it didn't work when I tried; made me go in search of a different rom I haven't tried yet [emoji51]
hello, i just tried to flash cloudyg2 3.3 and i have bricked my d802 16gb. i had stock lp and had rooted and installed twrp did the wipes (no internal), got the right lp bootstack and used the right settings, so i really dont know what went wrong.
the symptom is that lg logo show for a fraction of a second and then a washed out gray on top of screen that fades away slowly. also while connected in pc it reads like many many drives.
on the bright side i can enter recovery/download modes. in my original attempt i used the bumbed sign, on my tries to fix it i also used the loki one, same deal.
seems like i have no recovery file, i thought i did it with one of the programs i installed, but since i am newbie seems like i misunderstood. so no recovery file
any help?
solution found:
1.Download the latest TWRP from blastagator here.
2.Flash it with your current recovery, reboot into that new recovery.
3.Download SRKG2 rom (by somboons) here.
4.This rom is a full stock rom with some debloat and custom camera. Wipe /system/ /cache/ /dalvik-cache/ /data/ and flash it (choose any options, it's not important since you'll be only installing this rom because it also upgrades other partitions to a lollipop supported version.
5.Boot into the rom and reboot into recovery again. (If you are unable to boot or the boot is taking too long like 10 minutes, shut down, go to recovery again and perform a factory reset, the one that makes you type 'yes' in the keyboard and you should be fine).
6.Download CloudyG2 3.1 and wipe /system/ /cache/ /dalvik-cache/ /data/ again.
7.Flash the rom choosing the correct version of your phone (among other preferences) in the aroma installer.
8.Boot and enjoy!
i cant post link of the solution cause i am new, but many thanks to him. i still dont understand what went wrong, but my hypothesis is that i shouldnt install the lp bootloader since i was in lp anyway.
i hope it helps anyone with similar problem.
cheers
you are in qhsusb bulk 9006 souse srktool to unbrick
---------- Post added at 07:22 AM ---------- Previous post was at 07:20 AM ----------
that becuase wrong bootleader u must use bump kk bootleader then reboot recovery and flash rom
Can not change lte to 3g can someone please...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D800 using Tapatalk
So, last night I was messing around with some custom roms, and tried installing CM, I accidentally installed CM recovery as the boot img, and tried to backup from my backup file that I created via TWRP.
Now, when restoring i get into a bootloop, i think, and if I'm trying to install a custom ROM i either get a status 7 error or it can mount /system. I tried going into the Mount tab in TWRP and checking the system check-box, but it won't let me.
Help XDA-kenobi, you're my only hope.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ThaBlobFish said:
So, last night I was messing around with some custom roms, and tried installing CM, I accidentally installed CM recovery as the boot img, and tried to backup from my backup file that I created via TWRP.
Now, when restoring i get into a bootloop, i think, and if I'm trying to install a custom ROM i either get a status 7 error or it can mount /system. I tried going into the Mount tab in TWRP and checking the system check-box, but it won't let me.
Help XDA-kenobi, you're my only hope.
Click to expand...
Click to collapse
Flash a factory image and start fresh. And don't flash the wrong img to the wrong partition this time
... Device won't show up when i try to list it in CMD under fastboot devices... makes it knda hard to flash. Maybe I should just stop messing with this ****...
Disregard, I am apparently mentally challenged...
ThaBlobFish said:
... Device won't show up when i try to list it in CMD under fastboot devices... makes it knda hard to flash. Maybe I should just stop messing with this ****...
Disregard, I am apparently mentally challenged...
Click to expand...
Click to collapse
You did not mention that in earlier post. If you can't flash via recovery and can't use fastboot then you are screwed. Take this as an expensive lesson to always triple check what you are flashing.
---------- Post added at 02:04 PM ---------- Previous post was at 01:51 PM ----------
After thought. Have you tried flashing just a boot img from recovery?
XxMORPHEOUSxX said:
You did not mention that in earlier post. If you can't flash via recovery and can't use fastboot then you are screwed. Take this as an expensive lesson to always triple check what you are flashing.
---------- Post added at 02:04 PM ---------- Previous post was at 01:51 PM ----------
After thought. Have you tried flashing just a boot img from recovery?
Click to expand...
Click to collapse
I used an old directory with old files which I used to root my M7, that's why it didn't show up. It's all fixed now.
ThaBlobFish said:
I used an old directory with old files which I used to root my M7, that's why it didn't show up. It's all fixed now.
Click to expand...
Click to collapse
Oh, Good. Glad you figured it out!
BOOOOOOOOOOOOMMMMMMMMMMM!!!!!!!!!!!!!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1) Flash the firmware .48 Pie, unlock the BL and flash the Pitch Black Recovery
2) Assure that in recovery is unchecked the option "Disable DM Verity", format and wipe data, dalvik and cache and flash this force decryption - DO NOT WIPE SYSTEM OR VENDOR!
3) In the follow order flash first this boot patched for .48, then this system image and after latest Magisk.zip
4) Resize the system partition in the wipe advanced menu and reboot in system.
5) After first boot return in recovery and flash this package of gapps modified for AB (other packages don't will work)
6) Enable Wifi tethering installing this module on Magisk and the app in playstore called Netshare; once activate the thether from the app you can connect to internet from other devices setting manually the proxy address and the port indicated in the app
NOTE: IF YOU WANT SET A PATTERN LOCK CAN DO IT, BUT DON'T SET IT AT BOOT OTHERWISE YOU WILL TAKE A BOOTLOOP !
Thats'all!!! Enjoy it!!!!!!!!!!!!!
There is no link to the firmware
djmrmore said:
There is no link to the firmware
Click to expand...
Click to collapse
Its a GSI. Click on the written "this system image"
fosseperme said:
Its a GSI. Click on the written "system image"
Click to expand...
Click to collapse
Thank you I didn’t see it. :good:
Does it have bugs?
fosseperme said:
BOOOOOOOOOOOOMMMMMMMMMMM!!!!!!!!!!!!!!!!!!!
1) Flash the firmware .48 Pie, unlock the BL and flash the Pitch Black Recovery
2) Assure that in recovery is unchecked the option "Disable DM Verity", format and wipe data, dalvik and cache and flash this force decryption - DO NOT WIPE SYSTEM OR VENDOR!
3) In the follow order flash first this boot patched for .48, then this system image and after latest Magisk.zip
4) Resize the system partition in the wipe advanced menu and reboot in system.
5) After first boot return in recovery and flash this package of gapps modified for AB (other packages don't will work)
6) Enable Wifi tethering installing this module on Magisk and the app in playstore called Netshare; once activate the thether from the app you can connect to internet from other devices setting manually the proxy address and the port indicated in the app
NOTE: IF YOU WANT SET A PATTERN LOCK CAN DO IT, BUT DON'T SET IT AT BOOT OTHERWISE YOU WILL TAKE A BOOTLOOP !
Thats'all!!! Enjoy it!!!!!!!!!!!!!
Click to expand...
Click to collapse
So in Zenfone Max M2 we need to flash A/B GSI?
Techgaming432 said:
So in Zenfone Max M2 we need to flash A/B GSI?[/QUOTE
M2 Compatible with A GSI
Click to expand...
Click to collapse
Indy fox said:
Techgaming432 said:
So in Zenfone Max M2 we need to flash A/B GSI?[/QUOTE
M2 Compatible with A GSI
Click to expand...
Click to collapse
Yess
Click to expand...
Click to collapse
How to download and flash the .48 firmware can you give me the link of .48 firmware and installation guide because i am running on oreo in Zenfone Max M2
Hey in X01AD only a few GSI's are booting
Please make any MIUI or Oxygen OS GSI bootable on this device
Make this ROM with Android 10 plz
Give me pitch black recovery for pie version
Please provide a official build