CyanogenMOD for BQ Aquaris M10 FHD (freezerfhd)

CyanogenMOD for BQ Aquaris M10 FHD (freezerfhd) - Android Software Development

Thank you for opening the XDA thread, and once again thank you for developing this ROM for the M10! Finally there is an open source Android version for this tablet

Observation after Installing
First of all thank U very much for maintaining this image! I've unlocked the bootloader, flashed twrp, flashed your rom, gapps Aroma and rooted with magisk.
Everything seems to work OK/as expected. I had to deal with the following problems:
Bluetooth was very crappy. I could pair my bt-keyboard but not my bt-mouse. When keyboard did pair - and this only worked when I renewed pairing - the system did not make use of it, thus keypresses had no effect. After googling around for a couple of hours I had no clue why bt didn't work. After a while I remembered that marshmallow had something like runtime optimization through the doze feature - settings : battery : optimization. There I switched to all apps and added all BT-Services, Cyanogen-System and Android-System to 'no optimization'. Et viola bt works like a charm now. I posted this if other marshmallow users have the same problem.
Second: After unlocking the BTL the tablet displays a message concerning orange state and unlocked BTL. This is not a big thing BUT when tablet is shutdown and is trying to be loaded, this initial screen is shown permanently and the rumblepack fires up every 5 seconds. The screen is pure light white - with powered by Android and the unlocked BTL msg. So cause the background lights are fired up to 100 % and the rumble engine boots every five seconds the screen will be ruined and the battery won't charge. If power cord is unplugged everything is fine. So my solution to load the tablet a little faster instead of full booted state, is to boot to twrp which has a screen saver feature. When it's fully loaded I can power off with twrp menu. I think this happens cause the custom bootloader fired the tablet up to a very minimalistic state that only displayed this beautiful blue battery icon with the load percentage rate. I think this is gone now and so the tablet fires and fires up in infinity as long it is loaded. Booting to twrp should have the same effect as this display loading state. Perhaps you can add those two things to the ROM description so that other users know what to expect after flashing from the latest stock ROM. As far as I can say the cm ROM works like a charm now. After only installing gplay and gkeep I have 5 gb more on my internal partition and now I can format my SD card as internal storage which was disabled in custom ROM. Even using the mtp crap to transfer big amount of data over USB do not crash the transfer with my Linux box. So everything is fine and thank U very much for all the work U have done.

Nice work!
My bq m10 fhd have been my nightstand and alarmclock for a while.
Now it may be more active, and I got "new" toy to work on.
I had it from ubuntu over to android.
Checking the support site, Mibqyyo | Firmware update 2.6.1 for your bq Aquaris M10 FHD it is gone!
I may have a backup of all the firmware for this device, on another disk somewhere.
Have fun!

omarly said:
Nice work!
My bq m10 fhd have been my nightstand and alarmclock for a while.
Now it may be more active, and I got "new" toy to work on.
I had it from ubuntu over to android.
Checking the support site, Mibqyyo | Firmware update 2.6.1 for your bq Aquaris M10 FHD it is gone!
I may have a backup of all the firmware for this device, on another disk somewhere.
Have fun!
Click to expand...
Click to collapse
I also built LineageOS 15.1 and it's more stable than this old cyanogenmod. You can join our telegram channel: https://t.me/bq_aquaris_m8_m10

could i have the lineage download link for my x606f

Rortiz2 said:
I also built LineageOS 15.1 and it's more stable than this old cyanogenmod. You can join our telegram channel: https://t.me/bq_aquaris_m8_m10
Click to expand...
Click to collapse
Nice! Thx. I'll join

Does any one know of a lineage os version for the non hd BQ Aquaris M10?
It seems the telegram one is for the HD version.

Related

[6.0.1][UNOFFICIAL] LineageOS 13.0 for Lenovo P2

F.A.Q
-When will you fix xxx?
I will try to fix bugs whenever I am not busy, please don't ask for ETAs
-When will you bring-up LineageOS 14.1?
I think it might happen after finishing LineageOS13 project.
-I want to use navbar but build.prop edit didn't work?
Simply go to Settings>Navbar and enable it.You didn't need to edit build.prop

#rez
thank you ban persıe

@wzedlare: You Sir deserve a medal! Many thanks

Awesome! I use tap to pay with my banks mobile app, so I will install this as soon you get NFC working. Thank-you!!!

wzedlare said:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 6 (marshmallow), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Audio
Sensors
Flash
GPS
Known issues:
Fingerprint
LED
NFC
This is the first build for p2a42, so minor bugs are expected.Please report them if any.
Instructions :
Flash Twrp :- LINK
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Then flash the wifi fix
Reboot
Downloads :
Latest build [22/02/2017]: https://mega.nz/#!KtUVnIjL!fV57q4AOnf1QlIFxdOKENGDo6wqKvl3h_KFAnl1sN30
Download Wifi Fix: https://mega.nz/#!ChVVgbJA!MZIBX3Uv6LdH52V0aaY5PsU7_DsLGnjBaCRt3EgizNw
Google Apps: http://opengapps.org/
Credits :
One Team Forum
XDA:Rom Information
LineageOS 13.0,p2a42, ROM for the Lenovo P2
Contributors
wzedlare
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Alpha
Created 2017-02-22
Last Updated 2017-02-22
Click to expand...
Click to collapse
Ya we need nougat update quickly

pravalik said:
Ya we need nougat update quickly
Click to expand...
Click to collapse
Please read the second post

Hell yeah! The first custom rom for P2! I hope it will be the first of many! Many thanks. I'm getting this phone in just a few days and as I have some knowledge of porting roms you may expect more custom roms soon.

hotweiss said:
Awesome! I use tap to pay with my banks mobile app, so I will install this as soon you get NFC working. Thank-you!!!
Click to expand...
Click to collapse
Android PAY Don't work on unlocked bootloader / rooted / with custom ROM etc - security reasons
Wysłane z mojego YOGA Tablet 2-1050F przy użyciu Tapatalka

Is it possible to fix/disable the overactive noise-cancelling mic? The bug appears when ambient noise is high, mic volume is lowered greatly.
Very inconvenient to engage calls outdoors, must find silent spot or the other end cannot hear properly. Read its a global problem. Affects Xiaomi Redmi Note 4 also.
Much thanks.
BTW, India launched a 3gb version of Lenovo P2.

pokipokipxorn said:
BTW, India launched a 3gb version of Lenovo P2.
Click to expand...
Click to collapse
When and where to buy?
Sent from my Moto E using XDA-Developers Legacy app

Flipkart India, but the mic issue is pressing.

Why is a separate flash needed to get WiFi working? Is a WiFi fix included in the next build?

My data internet 3g+ or 4g did not turn on

Hi, please help (sorry for my english)
my update ended with Error: 7
before it writes: system partition has unexpected contens after OTA update
what am I doing wrong
---------- Post added at 09:17 AM ---------- Previous post was at 09:08 AM ----------
aaahhh ... maybe a found what is wrong .. this is OTA update a I wiped /system before update .. am I right?
---------- Post added at 09:39 AM ---------- Previous post was at 09:17 AM ----------
Does anyone have full rom in zip for twrp, please?

OK, I am back. Solved by flashing boot and system only, not bootloader.
But when I flash Lineage zip, after some time of booting phone long vibrate and led stays blue and nothing more happens.

New build is released:
- Nfc is now working
- Waking up device with home button is now working.
- You don't have to flash wifi fix anymore

@wzedlare any download link ?

veimus said:
@wzedlare any download link ?
Click to expand...
Click to collapse
Just download it from the thread(first post)

thanks, I just checked date and I was thinking that this is old build
Latest build [22/02/2017]
Click to expand...
Click to collapse

[ROM][9.0.0_r33][UNOFFICIAL] LineageOS 16.0

Changelog:
01-02-19:
- Fix notch gap
- Now SELinux enforcing
- Enable Camera2 API and include patched front camera lib
- Testing DT2W (please test and let me know)
25-01-19:
Sorry for the delay on this build
- Fixed Facebook + YouTube for sure this time
- Performance/battery heavily improved
- Updated sources
- Fixed LiveDisplay (again for sure this time)
23-01-19:
- Fixed Facebook
- YouTube fixed
- LiveDisplay still bugged (need to wait for Lineage to fix sources)
18-01-19:
BOOTING AND WORKING
Fixed major bugs
Fixed trust zone
Wi-Fi working ootb (thanks to rsyhan and Manolo)

I'm going to test every rom in mi8 lite forum as soon as I unlocked my BL.
This rom must be first bez it is Pie?.
Thanks devs .

Any feedback on the status of this ROM?

Finally!!! Gonna try it this evening or else tomorrow
Many Thanks!!

Anyone find bugs?

Just tried to patch this ROM into my platina, but at first I got a Error 7 message. Looked like the updater-script had a line to many, or mayb misconfigured?
After removing this line:
assert(platina.verify_trustzone("TZ.BF.4.0.7-00100") == "1");
The installation continued as it should, and I'm now configuring the device.
I could also not find where this line should be matching to?

Think I was replying to fast...
The system could not boot at all as it was hanging on the first screen which says "Unlocked bootloader". Nothing else happened.
Tried all I could so far to make it boot but nothing worked for me.
So back again on a working ROM....

Uploaded lineage-16.0-20190111-UNOFFICIAL-platina.zip to /sdcard and entered TWRP-recovery (version 3.2.3-1003).
During installation the following message is shown:
Checking for Digest file ...
Skipping Digest check: no Digest file found
assert failed: platina.verify_trustzone("TZ.BF.4.0.7-00100)=="1"
Updater process ended with ERROR: 7
Do I have to wipe something before installation? Or what is going wrong here?

*BUGS*
assert failed: platina.verify_trustzone("TZ.BF.4.0.7-00100)=="1"
Updater process ended with ERROR: 7
Unable to boot after delete this assert

NEW BUILD:
EDIT: Build doesn't boot. I will check soon. My friend @Lunarixus got AOKP to boot, hopefully Lineage should do the same.
Changelog:
- Fixed error 7
- Fixed DT/vendor *should boot*
- Updated sources
PLEASE INSTALL MIUI 10 PIE FIRMWARE BEFORE INSTALLING
Please grab logs such as kmsg and dmseg if it doesn't boot.

Error 7 is still happening

rKaoZ said:
Error 7 is still happening
Click to expand...
Click to collapse
You need to be on Pie firmware beforehand, I believe.

nysadev said:
You need to be on Pie firmware beforehand, I believe.
Click to expand...
Click to collapse
Where can I get Pie? Because the last official Global Rom is in 8.1

rKaoZ said:
Where can I get Pie? Because the last official Global Rom is in 8.1
Click to expand...
Click to collapse
Eu / miglolbe latest 9.1.15 was pie

NEW BUILD UP
Booting now!
Check #2 for more details <3

nysadev said:
NEW BUILD UP
Booting now!
Check #2 for more details <3
Click to expand...
Click to collapse
Yes! Works fine ! Thank you Man!

jmouf said:
Yes! Works fine ! Thank you Man!
Click to expand...
Click to collapse

It's working
Great! With this build I was able to boot! This LineageOS 16 is now running on my MI 8 Lite. Thanky you for your work!!!
Question: What to do with your firmware updater? As I wanted to update the firmware, as requested in #11, I installed the zip, rebooted, ... but what have I to do then. I didn't find any changes in settings (perhaps I didn't see it) and no new app. So ...?

AnGry36 said:
Great! With this build I was able to boot! This LineageOS 16 is now running on my MI 8 Lite. Thanky you for your work!!!
Question: What to do with your firmware updater? As I wanted to update the firmware, as requested in #11, I installed the zip, rebooted, ... but what have I to do then. I didn't find any changes in settings (perhaps I didn't see it) and no new app. So ...?
Click to expand...
Click to collapse
If you don't update to Pie before flashing any 9.x ROM, you'll have all sorts of broken things like sound not working, HWC broken, camera broken, etcetc.

[ROM][UNOFFICIAL][7.1.2] LineageOS 14.1 SM-T700

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.2 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This thread is for Unofficial LineageOS 14.1 builds for klimtwifi (SM-T700) The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Have not attempted a clean flash
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
There will be a new build every week, every Monday.
The builds will no longer be personally tested by me before being uploaded (but everything will probably be fine)
Change logs will no longer be posted within every new build, but instead when the changes are uploaded to GitHub. I will try though to post changes for major bugs or fixes as they are released.
Some builds might feature only minor changes, ie. only updating the LineageOS source
Klimtwifi Download
Google Apps:
Beans GAPPS 7.1.2
Kernel
https://github.com/LineageOS/android_kernel_samsung_exynos5420
Device Tree
https://github.com/LineageOS/android_device_samsung_klimtwifi
Aytex, who made all of the banners on this post.
@Barracuda77777 (For helping along the way)
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits - the base @Barracuda77777 and @nvertigo67 started of from)
@eousphoros (for his device git)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
XDA:DevDB Information
LineageOS SM-T700, ROM for the Samsung Galaxy Tab S
Contributors
DarkExistence
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2019-04-19
Last Updated 2019-04-19

reserved

another

This too

One more

Lol, and I get this one... Thanks again for the T700 continuation.

Installation
How to Install md5sum ? is it needed ?

How to install this version if I have the official version installed?
Enviado desde mi MI 8 mediante Tapatalk

I just installed the latest version. To install it over the official version, it was necessary to let twrp do a factory wipe.
The ROM appears to work just fine, but I have a few questions:
-the ROM suggests to configure the fingerprint, but I can't get my finger recognised. Is the fingerprint supported at all? (If it isn't, it is no big deal. I just need to know.)
-a new app called "Deathly Adiutor" is installed by default. Apparently, it is set up to manage the exynos processor. Do people use it and how?

Installation
jerome_m said:
I just installed the latest version. To install it over the official version, it was necessary to let twrp do a factory wipe.
The ROM appears to work just fine, but I have a few questions:
-the ROM suggests to configure the fingerprint, but I can't get my finger recognised. Is the fingerprint supported at all? (If it isn't, it is no big deal. I just need to know.)
-a new app called "Deathly Adiutor" is installed by default. Apparently, it is set up to manage the exynos processor. Do people use it and how?
Click to expand...
Click to collapse
Do I have to Install md5sum file ?

No, you don't need to install the md5sum file. You can use it, and then the rom is checked for tampering, but it is not compulsory.

Performance
jerome_m said:
No, you don't need to install the md5sum file. You can use it, and then the rom is checked for tampering, but it is not compulsory.
Click to expand...
Click to collapse
Does the Tab s get better performance from these updates ? as i was thinking of leaving my last official update if there
is no Performance gain .Let me know Thanks .

I did not feel much difference, but I am not a power user.

jerome_m said:
Apparently, it is set up to manage the exynos processor.
Click to expand...
Click to collapse
In what way, does anyone know? Speeding it up? (That would be cool!)

Legsmaniac said:
In what way, does anyone know? Speeding it up? (That would be cool!)
Click to expand...
Click to collapse
It is a kernel editor, you can edit clock speeds etc. It is developed by us (Exynos5420 team). It could not be on the official builds due to Lineage restrictions with pre-installed apps.
Please use it ONLY if you know what you are doing though

Thanks @DarkExistence for the contribution and continue with the ROM, my tablet revives now. I am testing it and at the moment it works very fine, only small lags in some transitions (build 20190420)

Thanks for building!
Please let me know if you need some specific testing and reporting scenario.

I tried to install latest unofficial release to my SM-T700 with the official samsung 6.0.1 release installed, with unlocked bootloader, last TWRP and rooted but can't boot, remains at the LineageOS logo. Official LineageOS installs without any issues. I also tried with older TWRP and unofficial releases with no success. Before the installation I did a factory reset and format data. Any help is really appreciated.
Thanks

nikkarat said:
I tried to install latest unofficial release to my SM-T700 with the official samsung 6.0.1 release installed, with unlocked bootloader, last TWRP and rooted but can't boot, remains at the LineageOS logo. Official LineageOS installs without any issues. I also tried with older TWRP and unofficial releases with no success. Before the installation I did a factory reset and format data. Any help is really appreciated.
Thanks
Click to expand...
Click to collapse
Hm, installs fine for me. I assume by factory reset you mean the relevant trigger in twrp? Maybe try regularly wiping dalvik, data, system and cache in twrp (sounds like you might not have wiped the system partition, as a factory reset leaves that untouched)

Finally got around to giving this a try after backing up Official.
Fully wiped/formatted prior to install which went without a hitch.
Then I found I had problems with GPS not connecting.
Since this is my only and regularly used T700 device, restored my Official back again.

[ROM][UNOFFICIAL][6.0.1] LineageOS 13.0 [TESTING][6.06.2019]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include "std_disclaimer.h"
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
Known issues
Video camcorder is glitchy
Low incall volume
Screen recording only works in a 3rd-party apps
If found a bug not listed here, feel free to report
Installation
Upgrading from CyanogenMod / LineageOS without wiping
For now, a dirty installation over another LineageOS 13.0 builds is not supported. It's highly recommended to proceed the installation with a full wipe.
First time LineageOS 13.0 installation:
NOTE: These builds aren't supported by Chrono Kernel, please don't install it - more on that in F.A.Q. section.
Download and flash a custom kernel from http://xda.mister-freeze.eu/XDA-files/ChronoMonochrome/kernel/temporary_kernel
(for Galaxy Ace 2 choose temporary_kernel_codina.zip, for S Advance - temporary_kernel_janice.zip). This step is not required if you already have TWRP recovery installed.
Reboot into recovery
Perform factory reset
Flash the Lineage 13.0 zip from SD card
Reboot
F.A.Q.
Camera start issues?
I hope I've worked around this issue, however it can be possible that camera refuses to start sometimes.
In the case this happens, for now there's only solution to wipe data partition.
Compatibility with standalone Chrono Kernel?
These builds aren't supported by Chrono Kernel.
The reasons for that are some incompatible changes in the ROM, so in order to make ROM maintaining easier, the standalone kernel version was dropped for now, however this can be changed in the future and support can be brought back. For now, please don't report bugs if you have installed it over these builds.
It seems like LineageOS 13.0 is quite outdated and unsupported anymore. Any reasons to build / use it?
It's truth, the currently supported LineageOS versions are 15.1 and 16.0. The reason to return to some older LineageOS builds is a maintaining issues on a such newer Android version as Pie or Oreo. It has become clear I can't support LineageOS 16.0 builds with big amount of hacks used in our builds.
Ok, this device development is pretty much dead rather than alive. Why keep it up?
It's a non-profit project. I like to support especially such an old devices, so no problems if there wouldn't be that much of users.
Finally, an unofficial LineageOS 13.0 build was released a long time ago for this device. What is different in these builds?
Existing LOS builds for this device has a lot of hacks in the source code. With upgrade to a newer Android versions it becomes more and more difficult to support it. I had to reconsider the way some device specific fixes are implemented, so that it should be easier to support it.
Still, I'm not entirely sure I'm able to get rid of every device hack used, however after some experience gained from I9300 development I feel myself much more confident than before. So that said you won't know if you don't try.
Downloads
(The link below says this build is Ace 2, just ignore it because this build is unified and supports both Galaxy Ace 2 and S Advance)
Install packages: https://www.androidfilehost.com/?w=files&flid=295159
Reporting bugs
When reporting reboots, please produce log below as follows
(using adb or terminal)
Code:
su
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
and attach in this thread.
If reporting another issues
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
A rough timestamp of when the issue occurred is also useful.
Click to expand...
Click to collapse
curiousrom said:
to quickly & easily capture logcat (Main log), Kernel log (dmesg) & Last Kernel log (last_kmsg which is important in case of unwanted reboot) without using a computer + adb or use a Terminal emulator on the phone:
Root the phone
Developer Options > Store logger data persistently on device > select All. More info about it here on developer.android.com
Install the free SysLog.
Reboot the phone & reproduce the problem(s).
Open Syslog & select logcat, dmesg & last_kmsg. Add some significant keywords in the bottom including in Notes describing the bug & hit Take log.
The individual logs + a .zip of all of them will be saved in /sdcard/Syslog. You must rename them .txt to be able to attach them to an XDA post like logcat.log > logcat_log.txt for example. Or you can choose Share which will .zip them & then you can attach to a post or upload somewhere & link to in your post if the .zip is too big for XDA's attachment service (20 MB max).
***
Bug Reports & Logs?
If the phone is not rooted you can grant this permission to enable Syslog using ADB (15 seconds ADB Installer) & a computer:
adb shell pm grant com.tortel.syslog android.permission.READ_LOGS
You can also install an app like MatLog to analyse the logcat, filter it, search in it, export files etc but Syslog is fast & easy. If not rooted grant permission for MatLog:
adb shell pm grant com.pluscubed.matlog android.permission.READ_LOGS
***
Click to expand...
Click to collapse
XDA:DevDB Information
LineageOS 13.0, ROM for the Samsung Galaxy S Advance I9070
Contributors
ChronoMonochrome, SergeyL
Source Code: https://github.com/CustomROMs/android_local_manifests_u8500
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP >= 3.2.3 and Stock 4.1.2 ROM installed
Version Information
Status: Testing
Created 2019-06-06
Last Updated 2019-06-06

Reserved

Reserved

Thank you so much ChronoMonochrome! I tested it and it works really well, great job!:victory:

Thank you Chrono, really a sweet surprise!!! Flashed and tested, working fine, superb job

OOOEEI! I saw my S Advance resting in my drawer. Straight away headed over to XDA to flash Lineage OS 16...but what a pleasant surprise. Flashed it working perfectly. Thanks!
Our S advance cant handle Pie roms for sure. This is perfect!

it would be nice if. You did lineage os 14 ultimaterom has annoying storage bug imma go try this

Hey, thanks for this ROM. I believe I found a bug. When I set a timer for 2 minutes, it took about 2:50 to go off. Longer timer durations will increase the delay.

[ROM] [UNOFFICIAL] LineageOS-17 [10_R18] [TREBLE] for Lenovo P2 [20/12/2019]

Initial Build
* December Security Patch R18
* Fingerprint Gesture Full working
* Vendor Blob Full Updated
* WFD Full Working Sound and Picture
* Xiaomi Part (Dirac sound, Vibration intensity, Screen color option, Spectrum option)
* Sepolicy Enforcing Full Working

Your roms gsi or sgsi or what please tell me because you make a lots of roms

Bro this is lenovo p2 not xiaomi device. Again lineage sgsi.

titanium backup also doesn't work with these gsi

I flashed it without GApps but still there was google stuff installed in the phone. Why?

Very confused with this post, is this for the lenovo p2 or vibe? I thought this forum was for the p2 only? Also the replies mentioning gsi, excuse my ignorance but what does that mean?

blofse said:
Very confused with this post, is this for the lenovo p2 or vibe? I thought this forum was for the p2 only? Also the replies mentioning gsi, excuse my ignorance but what does that mean?
Click to expand...
Click to collapse
I've installed it 1 hour ago and so far is ok. I did not install gapps but still got chrome, play services and play store installed. I've disabled them all for the moment.
GSI: https://source.android.com/setup/build/gsi

joshthemajor said:
I've installed it 1 hour ago and so far is ok. I did not install gapps but still got chrome, play services and play store installed. I've disabled them all for the moment.
GSI: https://source.android.com/setup/build/gsi
Click to expand...
Click to collapse
Thanks for the reply and great info. What version of twrp did you use and did you clean format?

blofse said:
Thanks for the reply and great info. What version of twrp did you use and did you clean format?
Click to expand...
Click to collapse
I did a clean format, i'm on 3.2.3-0
I found the first issue, which is kinda dealbraker... The "Dark theme", which is vital for me, is not well implemented, for example on SwiftKey I cannot see the ENTER key and the number row is all lighted insead of being the same color pattern of the rest of the theme.

how do you backup apps bro? titanium backup isn't working with this Gsis?

razatthakur said:
how do you backup apps bro? titanium backup isn't working with this Gsis?
Click to expand...
Click to collapse
Are you rooted? If not, might be worth rooting the rom Post install then using titanium backup as an experiment...

blofse said:
Are you rooted? If not, might be worth rooting the rom Post install then using titanium backup as an experiment...
Click to expand...
Click to collapse
yes bro rooted with latest Magisk version.
but titanium backup isn't working.
modules were working fine.

No Gapps
Is there a way to install it without any Google application pre-installed?

Bluetooth not working in audio video playback.

xiaomi parts keeps stopping and sometimes trechbut can u please add a gaming mode for disabling Q guesture while in game and a sleep time quick tiles and cant install android 10 gapps showing to install 8.1.0 gapps in twrp

del

Sameer1129 said:
Bluetooth not working in audio video playback.
Click to expand...
Click to collapse
I have the same issue how to resolve it ?

Hello, how do I install the ROM without any Gapps?

Fingerprint gestures working?

Database Users

welcome