¡HELP!,
Hello to All, in my Lenovo Z6 PRO I have a problem with my wifi (freezes launcher when is active) and mi mobile network (turns off and turns on every minute approximately)
My Lenovo Z6 Pro came with the Global ROM from AliExpress.
My first problem was with the calls, when the screen turned off when making a call because I cover the proximity sensor with my ear, the person I was talking to did not listen to me but my microphone did serve and everything since in the calls of WhatsApp had no problems. I don't know how much I did but I deleted a lot of things with the help of adb fastboot, I changed ROMs and unintentionally blocked my phone.
After so much work I managed to revive my phone with a CN ROM 11.0.575 but my screen freezes when my wifi is active and I want to return to the launcher by default (I had to change the launcher and with that it was fixed) when I deactivate my wifi and I hope For a moment my phone returns to normal and my mobile network
turns off and turns on every minute approximately (I have not solved this). I do not know what else I can do, I really like the phone in so much design, specifications, camera, etc, my idea is to erase EVERYTHING again and install something that does not give me these problems, HELP ME, PLEASE!
Another issue is that My phone is already unlocked, I don't know how I got it but I didn't even have to go to site "www zui com / iunlock" (so I don't know if I did it right but it already appears as unlocked) I know because when entering fastboot mode my phone says that it is already unlocked, but I reiterate, I don't know if I did it correctly.
Among so many things I did I managed to install TWPR 3.3.1.
PLEASE HELP ME TO SOLVE MY PROBLEM WITH MY WIFI (the one that activates it and goes to the launcher by default causes my phone to freeze) AND WITH MY MOBILE NETWORK (which is activated and deactivates every minute approximately).
Thank you so much.
Related
Hi all!
With the latest Dopod's ROM it was nice for the first month, but now I have strange behaviour.
Sometimes the device does not return from standby/suspend mode. It does nothing at all if I press the power button. The LEDs are blinking as usual and if I call my mobile from other phone, I got no answer signal, whi my Prophet does not ring at all, means that GSM part works. Any alarmas and notifications fails to appear, as well.
I noticed, that the prsence of any extra unclosed applications increases the chance to hang. So far, I have no idea how to workaround it...
Any ideas? Is someone have the same problem?
It happens to me with my JAMin with both the old and the new WWE rom. somebody exolain it with the backlight settings, but nobody really understand why it happen
Someone alse have this problem?
I also had this issue for a time. I performed a hard reset and it stopped happening, so I am going to assume that it probably had something to do with some of the software that I had installed on it. My money is on SPB PocketPlus. I've not installed it since the hard reset and it hasn't happened since.
Any extra ideas?
I have the same behaviour since the very first day i upgraded to the latest rom.
I find that it happens regularly if it does, meaning you soft reset the device to get access again and then sure enough one hour later again the same behaviour. I have been on travel the last weeks, where i did not have a chance to sync the device and I have not experienced this behaviour at that time.
Maybe it has something to do with the Sync Process.
I hope we can dig into this a little more because it is really annoying. Especially if you consider that the phone does not ring anymore so you never know if someone calls or not.
Cheers Ulf
Password?
Have you set a password on your phone? If so, then remove the password and see if it makes a difference.
Yes I use the Password Funtcion on the PDA part and also for the SIM card.
I will try to turn off the PDA password and see what happens.
I keep you posted.
Thanks for the suggestion.
Ulf
___________________________
Dopod 818pro
Hi All,
turning off the PIN function has solved the problem. The effect is reproducible.
Raised a next question though:How to protect from your wife sniffing into your private appointments without using the PIN?
Gruss Ulf
I have no used any passwords, but has the problem. I've noticed that it happens when the phone is charging. But not only that.
i had the same issue...i read before somewhere in the other forums...(maybe this forum but couldn't find it) to adjust the backlight and standby time to the same value..that fixed mine and hope will work on yours.
thycpt737 said:
i had the same issue...i read before somewhere in the other forums...(maybe this forum but couldn't find it) to adjust the backlight and standby time to the same value..that fixed mine and hope will work on yours.
Click to expand...
Click to collapse
Thanks great, so far it helps. If I got the bug agait - I will post. BTW, on the Dopopd's 2.15 it is the only reason for softreset, all the rest works fine!
I have the same problem with prophet touch IX and VIII.
Sometimes, after the device was set to standby (or the display was disabled after some minutes), I can't enable it by pressing the powerbutton.
It seems to have contact to the GSM net (you can call the phone, but it won't ring).
ActiveSync also recognizes the phone, but won't connect.
Maybe this happens less often with battery ~70-100%, but I'm not sure.
The problem occured some weeks after installing Touch IX, and didn't disappear after changing to Touch VIII.
With pdaviet 6, there wasn't anything like this (only the known bootscreen-freeze-problem).
Any ideas?
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.
Hello everyone,
I recently bought a new S4 i9500 and like every android user moved between some roms - Arrow/Wanamlite and so ... and probably something went wrong:
1. The WiFi HoT-Spot isn't working, i can turn it on and other devices can connect but their internet isn't responding (like they're data is turned off), also happends on laptops.
2. I have a problem with my screen, its rotating all the time and shows me a digital clock on black backgroung (the same clock from the S View Case - http://cdn.gsmarena.com/pics/13/04/s...marena_102.jpg)
when i'm on landscape mode (games, movies...) its rotating back to vertical mode and shows this clock thing ..
it doesnt happend when I am on Flight Mode. I got a new sim, but its not it , also not an error with my celluar operator - cuz we have couple of i9500 and Im the only one who has it.
its getting annoying when it happens 30 times in 2 min. and I just cant use the phone that way.
its like fast blinking, for 1 sec. but it pauses games, movies, canceling keyboards and make the web page pop.
sorry for the poor explanation, its hard to understand num.3 without seeing it.
hope you understand anyway.
What's Wrong with my S4 ?
thank you all .
Roy.
BUMPPPPP!
Edit:
I Just Figured out that my WiFi Tethring issue was part of a 'WiFi Package' I should have operate with my cellular operator.
but what about my second issue ?
please delete this post
Hi,
Recently I bought Coolpad R116. It run on default EUI system it was shipped with.
Everything seems fine, but after time is starts to turn on bluetooth by itself.
Sometimes it's on after screen unlock and gone few seconds after, sometimes it keeps being on - but I never turned it on myself.
It seems to be main battery eater for this device.. First time I kind a solved it by factory resetting, but it just returned.
As far as I remember location scanning is disabled (both wifi and bluetooth)
appreciate any suggestions on this
My Casio Pro Trek WSD-F20 always loses Bluetooth connection to my Mi9T after something like 30-90 minutes. The phone still thinks it is connected to the watch (eg, still successfully sends notifications) but the watch says it is not connected to the phone (eg, "disconnected symbol" is displayed, Play store on watch will not open as "you are not connected"). Restarting watch does not restore the connection. Turning watch or phone Bluetooth off and on does not restore the connection.
However, restarting the phone does reliably restore the connection.
Watch and phone (MIUI Global 10.3.12 Stable) are both current on all software. I have done a factory reset on the watch, and repaired after forgetting watch on phone, removing Wear OS app and reinstalling. Problem remains. I am confident, but not completely certain, that I have turned off battery optimisation for everything that matters, even installing MIUI Hidden Settings which appeared to let me do this for Bluetooth. My phone is not rooted, and I need it that way for a couple of apps I use regularly.
What can I do to keep watch and phone fully connected? Thanks in advance.
Had a similar issue with my Gear Fit2 Pro. MIUI kills the process maintaining the connection between the watch and the phone.
I ended up disabling the MIUI optimizations in the Developer settings and change the autostart settings for the "Samsung Galaxy Gear Fit Plugin" (that's the app maintaining the connection between my watch and the phone) to enable and enabled the option to let the app run in the background without any restrictions.
Here is a good information about this stupid MIUI background process killing and how to prevent it: https://www.quora.com/How-do-I-keep-an-app-running-in-the-background-in-MIUI
Good luck
I had that problem when I was running Global ROM. When I switched to Xiaomi.eu, the problem seemed to have gone away.
grantem2000 said:
My Casio Pro Trek WSD-F20 always loses Bluetooth connection to my Mi9T after something like 30-90 minutes. The phone still thinks it is connected to the watch (eg, still successfully sends notifications) but the watch says it is not connected to the phone (eg, "disconnected symbol" is displayed, Play store on watch will not open as "you are not connected"). Restarting watch does not restore the connection. Turning watch or phone Bluetooth off and on does not restore the connection.
However, restarting the phone does reliably restore the connection.
Watch and phone (MIUI Global 10.3.12 Stable) are both current on all software. I have done a factory reset on the watch, and repaired after forgetting watch on phone, removing Wear OS app and reinstalling. Problem remains. I am confident, but not completely certain, that I have turned off battery optimisation for everything that matters, even installing MIUI Hidden Settings which appeared to let me do this for Bluetooth. My phone is not rooted, and I need it that way for a couple of apps I use regularly.
What can I do to keep watch and phone fully connected? Thanks in advance.
Click to expand...
Click to collapse
+1 to this, facing the same exact issue and fixing it temporarily using the exact method i.e. restarting the phone.
PS: I am using Huawei Watch (Classic/Original)
Same here with my Fenix 3HR.
I actually returned the phone due to this. Too many issues with too many apps being killed. And yes I did all the things that should/needed to be done to prevent apps from being killed. Too much work involved per app just to get things to maybe work properly.
Same issue for me using the eu rom. Clearing all data works without restarting the phone. Starting to get annoying.
I have the same problem as OP.
I had it with my Ticwatch E when paired with Redmi Note 4, while my girlfriend's Ticwatch E connected with ASUS Zenfone works great.
Now with Fossil Gen 5 paired with Redmi Note 7 I keep having the same problem.
Does anyone know if the problem happens with Xaiomi Wear OS watches or Amazfit watches?
I fixed it by accepting all permissions on the wearos phone app.
borofanuk said:
I fixed it by accepting all permissions on the wearos phone app.
Click to expand...
Click to collapse
What else have you done? I also have a Xiaomi Mi 9T Pro with stock 10.3.4.0 and I have the same issues. It is becoming increasingly annoying... I am desperate. Wear OS is battery deoptimized in both menus, set to autostart and still the Bluetooth disconnects after a few hours. It is pretty clear that the issue is after Wear OS, as Wear OS app is running , but the phone somehow cuts Wear OS from the internet.
PS: Also have tried custom ROMS... Evolution X does not have the issue, but has other issues (like the fact that Android Auto does not work).
It's fixed! I hoped the move to Android 10 would solve the bluetooth connectivity issues with my Casio Pro Trek watch but did not expect that it would. But it did!
I now have a Pro Trek WSD-F30 in place of the F20 I had when I first made this post. Prior to the Android 10 upgrade, the F30 connectivity to the 9T was just the same as the F20. Bluetooth connection helped for 30 mins or so after restarting the phone then 'dropped' (the phone continued to send notifications etc to the watch, but the watch displayed the 'cloud with a line through it' symbol to indicate it was not connected and would not connect back to the phone.)
The Android upgrade alone did not fix the problem; I also had to 'factory reset' the Mi 9T which is now at 'MIUI Global 11.0.4 Stable 11.0.4.0 (QFJEUXM)` based on Android 10 with the 2020-01-01 Android security patch level. My phone is standard and unrooted though after the factory reset I removed many of the pre-installed apps with Xiaomi ADB Fastboot Tools. The Wear OS app on the phone is set to have 'no restrictions' in Battery Saver and Autostart On. Otherwise everything is just 'as installed' and it all works well.
My F30 has remained fully connected to my phone for 3 days. WiFi on the F30 is set to Automatic and I get 2 days plus battery life (I only got this previously if I had Wifi Off). The watch is now behaving as I hoped it would when I first got it. What a delight.
grantem2000 said:
It's fixed! I hoped the move to Android 10 would solve the bluetooth connectivity issues with my Casio Pro Trek watch but did not expect that it would. But it did!
I now have a Pro Trek WSD-F30 in place of the F20 I had when I first made this post. Prior to the Android 10 upgrade, the F30 connectivity to the 9T was just the same as the F20. Bluetooth connection helped for 30 mins or so after restarting the phone then 'dropped' (the phone continued to send notifications etc to the watch, but the watch displayed the 'cloud with a line through it' symbol to indicate it was not connected and would not connect back to the phone.)
The Android upgrade alone did not fix the problem; I also had to 'factory reset' the Mi 9T which is now at 'MIUI Global 11.0.4 Stable 11.0.4.0 (QFJEUXM)` based on Android 10 with the 2020-01-01 Android security patch level. My phone is standard and unrooted though after the factory reset I removed many of the pre-installed apps with Xiaomi ADB Fastboot Tools. The Wear OS app on the phone is set to have 'no restrictions' in Battery Saver and Autostart On. Otherwise everything is just 'as installed' and it all works well.
My F30 has remained fully connected to my phone for 3 days. WiFi on the F30 is set to Automatic and I get 2 days plus battery life (I only got this previously if I had Wifi Off). The watch is now behaving as I hoped it would when I first got it. What a delight.
Click to expand...
Click to collapse
I can confirm MIUI 11 fixes the issue (I am on EEA version of 11.0.6.0). Normally I never upgrade unless I have very good reasons so for the last couple of months I was using a partial workaround using Tasker to reopen WearOS and reset the bluetooth connection. But I am happy to report this does indeed fix the issue.... so for all of you reading this thread and having a Xiaomi phone -> upgrade to MIUI 11.
Many thanks grantem2000!
Hello,
i bought a new oneplus 8 pro form tradingshenzhen.com EU warehouse, thinking it would have been the EU device
By the time i realized it wasn't, it was already shipped (from Germany to Italy in under 48 hours, amazing service on that side)
I received a IN2020 device, apparently already flashed by them with Oxygen OS Global 10.5.6
I have 2 problems:
- 5g gets disabled on startup saying it's not supported on dual sim devices ( i can live without 5g)
- googles discover is completely empty, both in "google" app and in launcher (i don't want a phone without my favourite app)
Everything else works
I can switch freely from EU to Global rom, so far i tried:
- global 10.5.6
- global 10.5.8
- EU 10.5.6
- EU 10.5.8
Everytime i wipe everything (phone boots ok even without wiping, even interregional flashing), setup hangs on google services "only one second/solo un secondo"
I tried postponing setup, on each rom, sometimes i get the message "can't reach google" (in italian), but not anymore on 10.5.8 global, but still no news or anything in discover
I tried resetting google play services and google app, clearing cache, everything i could find to solve discover issues on google search, i'm out of options so now i turn to you hoping for help before returning the phone
I included 3 screenshot showing discover on launcher, app, and app settings showing discover is enabled (and yes i tried disabling enabling both in app settings and in launcher settings)
I have the feeling this device is somehow "blacklisted", maybe cause it was first turned on in china for flashing?
Thank you very much
I wanted to add: if i go back to my Redmi Note 8 Pro everything works as expected, so i think there should be nothing wrong on my google account side
Another thing i noticed: i opened the app Xiaomi Home (to manage my webcams), first thing it's asking is my location and the seggested country was Germany, not Italy
Could this be related to google discover not working?
https://www.guidingtech.com/fix-google-discover-feed-not-working-issue/
Thank you for your reply, i tried all that and nothing worked, it was included in "everything i could find to solve discover issues on google search"
Anyway, i managed to finally fix it, i just don't know how