Flashed to G935U, but now need to flash back to original branded Verizon so I can sell the phone.
Looking for G935V to flash with Odin.
Thanks
_n00b
Need to post your firmware version so we can match your binary. It will be listed in your recovery.
updato.com
Related
Hello, I'm looking for help unrooting. I have a T-Mobile S6 Edge +. Here are screenshots of what it's running. I can't find T-Mobile SM 928I firmware. I am also having issues getting Odin to run on my new laptop...I feel like I've tried installing 100 different drivers, with no luck! I know there is as mobile Odin app I'm willing to try if I can find the right firmware. Any help is appreciated!
gszeman said:
Hello, I'm looking for help unrooting. I have a T-Mobile S6 Edge +. Here are screenshots of what it's running. I can't find T-Mobile SM 928I firmware. I am also having issues getting Odin to run on my new laptop...I feel like I've tried installing 100 different drivers, with no luck! I know there is as mobile Odin app I'm willing to try if I can find the right firmware. Any help is appreciated!
Click to expand...
Click to collapse
First of all install these drivers after that download odin3
Download your firmware file from updato.com or sammobile
Download firmware for ur model and remember doesn't matter from which country or carrier you get its important to be your model (g928i) extract the firmware zip put it in AP click start after that wipe and see how it goes
BTW wrong section should've posted it in q&a
Hello,
I currently have an unlocked G930A that is running on 7.0, I am using the T-Mobile carrier and I would like to flash to the T-Mobile rom. I know it was possible on marshmallow but I couldn't find any posts regarding 7.0.
If I follow these instructions
Talal916 said:
Thanks bro! You know which version of Odin to use? I'm on 3.12.3 and it's giving me invalid sha md5 error. File is fine. Other guy mentioned Odin from Verizon thread. Couldn't find it
Edit: Found it! It's PrinceComsy Odin 3.12. It worked perfectly! However, now my fingerprint sensor doesn't work. Is that because I didn't flash bootloader? If I flash just bootloader, will it still wipe the system?
Edit 2: Goddamnit Samsung Pay isn't working either. Says I made unauthorized modifications.
Final Edit: So apparently you have to flash Bootloader as well to get Samsung Pay and fingerprint sensor to work.
Basically, Download PrinceComsy's 3.12 Odin from Verizon Root thread. Then flash the latest G930T ROM from SamMobile. Tick BL, AP, CP, AND CSC. Make sure you ran Odin with admin privileges. It'll wipe internal SD so back that up.
Click to expand...
Click to collapse
But using the 7.0 T-Mobile ROM from sam mobile. (I have made a backup of the device with smart switch.)
Should I be okay?
Also to mention: If its only possible to flash the U rom, please do let me know.
Im flash t-mobile rom 7.0 on sm-g930a without any problem and works great and i have better network strenght signal.Im on Ultra-mobile network witch is T-mobile.Wi-fi calling works.
ok i also have ATT sm-g930a and want to install the tmobile rom as i am on tmobile.
the phone is sim unlocked.
do i need to turn off find my samsung fiirst?
I was planning on rooting my phone and found out that the battery doesn't charge to 100% yet. I installed the 4 modified firmware files that were included and want to return to the stock firmware, but I cant find the right firmware for my phone.
PDA/CSC Version is: G950USQE1AQDE
CSC code: XAA
Any help would be appreciated. Thanks!
I gave you what you need on Reddit in case you haven't seen it yet.
Greetings pals i have a really big question, i got a S7 Edge from AT&T (SM-G935A) but i cant update to nougat so i flash the unlocked (SM-G935U) firmware to get Nougat so i just wanna go back to AT&T but i cant via odin i downloaded a lot of firmwares labeled to 935A but when i try to flasg via odin it stucks at File analysis and thats it, also i tried with another (older) version of odin and it gives me a soft brick the main cause i want to go back to AT&T its because i want to try Oreo Beta but im stuck
Any help would be appreciated and if something its wrong with this let me know
Hi,
I am trying to flash my SM-G935A AT&T S7 Edge (not carrier unlocked) with the new SM-G935U firmware (G935UUES4CRG3/G935UOYM4CRG3/G935UUES4CRG3/G935UUES4CRG3) that I dowloaded for my US AT&T S7 Edge. I upgraded my S7 Edge to the latest Oreo firmware via OTA around a month ago.
I used SamFirm to download the image to flash. Anyhow, even though I put every file into its respective category on Odin 3.13.1, I get an "SHA256" mismatch error. I've seen some instruction that say to only add the AP file onto Odin and others say to use the prince cosmey version of Odin. What could be the problem? Does the phone need to be carrier unlocked? Is my firmware too new or of the same version? Do I need to use the prince cosmey version? Is it not possible to flash the g935u firmware onto a g935a phone? Should I use another download source? Should I use the slightly older G2 firmware? Anything else I should consider?
Also, I noticed that I could not download firmware for the SM-G935A using the ATT code with SamFirm? Any reason as to why?
I realize that there are many other threads that touch upon this problem but they are either with a different edition of the phone, firmware version or some other variant. I'm posting a new thread because I want to be as thorough as possible and make sure not to brick my phone by receiving safe advice before moving forward. Thank you for your time!
Below are the SamFirm download details:
SamFirm v0.3.6.0
Checking firmware for SM-G935U/ATT/G935UUES4CRG3/G935UOYM4CRG3/G935UUES4CRG3/G935UUES4CRG3
Model: SM-G935U
Version: G935UUES4CRG3/G935UOYM4CRG3/G935UUES4CRG3/G935UUES4CRG3
OS: Oreo(Android 8.0.0)
Filename: SM-G935U_2_20180802135240_rnnvd1mwvs_fac.zip.enc4
Size: 3125412480 bytes
LogicValue: ympm9uc708lgw7kk
Correct Thread?
Did I post in the wrong thread or something? Is that why there is no response? Would someone be kind enought to point me in the right direction if this isn't the right section for such a question?
Thank You
Hi did you find any answers to this issue? i got stuck on same point as you...
Stock Odin checks the version on the device and fails because the U version doesn't match the A version you are "upgrading". There are patched versions of Odin that skip this check, and that is what you need to do a cross-carrier upload.
Exfirexs said:
Hi did you find any answers to this issue? i got stuck on same point as you...
Click to expand...
Click to collapse
Use a patched odin to flash the firmware, it will go through.
0x0null said:
Use a patched odin to flash the firmware, it will go through.
Click to expand...
Click to collapse
Hi, yes it worked!