HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
I bought the Qtek 9100 from a seller on ebay who listed it as faulty due to not booting..
I assumed it was most likely the battery, So I ordered it, cleaned it up a bit, waited a whole MONTH for the battery to arrive (Damn you customs! haha), charged it, And whoop, it turned on.. Kinda..
It showed the O2 boot logo, then suddenly the screen started showing this very bizarre set of lines almost as if the ribbon was broken.. this however couldn't be the case, as the O2 logo was displayed fine, and opening and closing it didn't affect the screen..
So now.. Having booted it and had it crash before even loading windows, it refuses to turn back on, So I attempted every trick to hard reset it.. No luck
The only luck I've had, is holding the power button down for 30 seconds with the battery removed, and putting it back in for it to complete the above syptom.
I'm assuming as it boots the logo perfectly fine, it's not the battery (it's brand new, and is charged from a separate charging facility) Not the screen either.. So, It's got to be something else? :S
I'm trying to put as much information possible as to get the most informed solution to my problem :/
I'd truly love a solution for this as I've spent the remainder of my money on this phone (only a student) and really require a working phone soon.
Thank you so very much , PLEASE HELP! D:
Thanks guys lul
problem
plese forgive me for my bad english but i hope you understand what i try to say! i have 2 qtek 9100 with the same problem! i i resolve the problem in one way at both of the phones! i disassemble the phone on the location of the display screen and there is 2 integrated circuit boards and between them i put a piece of paper and at the bottom of the screen one horizontal piece it seems that was the problem integrated plates touching each other is that the phone was disassemble before! i hope this information will help you !
Hi im from Germany,
i tried to flash my Acer S200 but it stopped by 50% and i have pluged the cable out. I cant turn it on, it gives no signal, i cant bring it to the download mode. Nothing is working no hardreset with buttons.Nothing is working and when i plug it to usb the LED isnt blinking
Sorry for my bad english ..
my phone is new, it has garanty, should i contact the acer support or can anyone help me ?
Hold volume up/vol down button + reset until you see "clean boot"
i tried it the phone gives no signal .. no clean boot is coming .. the rom flashing was at 50% i think it is breaked
but thank you
did you try removing then replacing the battery. then try bootloader mode again?
yes i tried but nothing is working i cant enter the bootloader nothing is working it is just off no vibration nothin is working
sorry, but I have to ask, are pressing then holding vol down +power +camera buttons
at the same time until blinking red light starts?
you have to get into bootloader mode then flash a custom rom
brainmaster has a few including a "clean" rom.
I had this happen awhile ago and tried so many things for 2 days that now I don't
remember what actually worked! But I don't think that your S200 is bricked.
Also, make sure that you keep the power cable pluuged in (not usb)
you need a good charge even if you don't see the green light.
just keep trying and if I can remember I let you know.
or someone here will help you to find a solution!
thank you for your help but there is no light blinking. Also when i plug it to charge no light is going on. it doesnt charge the battery. i hope you can remember
i already know how to flash a rom but the phone doesnt give any sign
sorry I can't remember but you should ask brainmaster and maybe he can really help.
And he speaks german= )
thank you i will send him my problem
Any solution
Hi. I kind of found myself in the same situation. My acer s200 is unresponsive, no blinking lights no matter key/reset combinations. Had been in the middle of flashing on a new ROM when it got accidentally disconnected.
Any possible solution? Already checked the battery out in a different phone and it's fine and charged.
Hey,
i don't want to looks like a vultur, but if some of you can't find a solution to resolve the problem you have, I'm interested by the device because I need some piece. Of course I hope you can resolve your problem but if there are no led blinking, the last possibility is to send it to acer, and if you don't want to wait/pay/or whatever to with the acer support, I'm interested by your device.
Arto
Vulture indeed!! I'm need of help man.
you still need help?????
Hey GarcoG. Yes, still in need of help. My S200 is currently a desktop paperweight at home. It's a beautiful paperweight but it was made for so much more. Would really like to get it up and running again.
A new thing I noticed. I'm able to charge my phone's battery to full on my friend's s200. Of course when I put it back into my phone, it's still completely unresposive. However, I noticed that whenever I put it back into my friend's phone, the charge on it has reduced. I'm pretty sure it's not a battery issue I have since my phone is still unresponsive with my friend's battery in it and the same happens with that battery as well.
Would really appreciate any ideas on fixing this.
Hi, count me in. I just jumped on your wagon.. will try to disassemble this beauty soon before I officially demote it to a shiny paperweight.. well it's not that shiny, i put on a matte screen protector on it
Really funny about that matte screen protector. Cannot wait for the results. In my case, phone got accidentally connected just as it had reached the stage of flashing on the new ROM. Was thinking it was probably unresponsive because the ROM instructions that enable it respond to key combinations are absent hence cant get it into Bootloader mode.
@ incognito_tkd: Any luck with the disassembly? Would like to know your findings.
I have same problem... same situation
But... when I connect my USB charger, it shows red LED on... as if the charging is ON. But no reaction
Any one help please
there is no possibility to repair the phone... you have to send it to acer !!
i got my phone 1month after i´ve send it
Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch buttons were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......
How to unbrick.
Caryaz said:
Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch buttons were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......
Click to expand...
Click to collapse
I can help you, I bricked my phone about a month ago and it took me 2 weeks to fix it. But I learned exactly how everything works and how to fix it. Give me some time and I will type a post and upload all the necessary files.
Partitioned
Have you ever partitioned your phone for CM10.1 or some other reason?
huawei u8800/51
Macgyver14 said:
Have you ever partitioned your phone for CM10.1 or some other reason?
Click to expand...
Click to collapse
Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch BUTTONS were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......
Hello developers and my fellow xda members i would like to ask for your help on this matter my yureka plus has been hard bricked since 20 days now and no matter what i try it wont get unbricked.
how did it happen??
well even i dont know actually i had recently flashed an 8.1.0 oreo rom known as nitrogen os and it ran well for like a week till one fateful thursday i have a habit of cleaning my device with clean master and restarting it every week and i did that and the next thing i know my device wont boot up later on i found out for the very first time my device had hardbriccked with no mistake of mine.
link to the rom i used :: https://forum.xda-developers.com/yureka/development/rom-nitrogenos-t3701962
what solutions did you try??
well, many actually since this is the only device i have and i have been using it for a well over 2 years now i did the good ol google search accompanied by a youtube search to find out how to get my beloved device back.
these r all the methods that i used which ended up "successful" but my device refuses to boot up even though i have followed every one of these tutorials to revive my device perfectly even repeating the process 2-3 times thinking i did something wrong but to no avail the device still refuses to get unbricked.
links to the methods i tried :: https://forum.xda-developers.com/yureka/help/guide-unbrick-hard-bricked-yureka-t3303112 (claims to have unbricked his device 3 times didnt work for me though)
https://www.youtube.com/watch?v=1n1qTpVvOZ0 (claims to have helped 10 other people get thier device back with this same method again didnt work for me)
what r the devices symptoms ??
well, let me see there r many although i have scoured the internet for the past couple of weeks i havent found a single person with the same symptoms as mine.
when the sd card (on which the emmc is still burned on) is out of the device no matter how long you press the power button the device will not show any signs just nothing.
when put on charging or connected to the laptop (without the sd card) though it just shows that dreaded little red notification light and thats all.
with the sd card in and emmc burned onto it the device when holding the power button will just flash the screen with nothing but just a black screen no text no logo just a plain black flashing screen until i let go of the power button.
when plugged in to a laptop or a charger with the emmc in though the device vibrates goes into the "fastboot mode" with all the lines automatically without me doing nothing just plugging it in and it doesnt stop there it keeps repeating the cycle of vibrating going into the fastboot mode then going off till i take the cable off.
but the laptop doesnt detect it as anything not as "qhusb bulk" not as "qloader 9008" not even as an unknown device even though i have installed all the drivers neccessary and more.
the device has been in this state since well over 20 days now and i cannot for the life of me am able to revive it so i ask for everyones help for i will b forever grateful if u help me get this device back.
also, i refuse to believe its any hardware problem since the device has never fell off from my hand ever since i bought it over 2 years ago.
I was having a similar problem what is ur model name was it android one or cyanogen one.
If it was android one then flash this file with ydgp tool
If it doesn't start then to try to boot using charger connected
If the booting process starts or it show yu logo after yureka plus logo that means it's your battery problem