[Q] Brick Huawei u8800-51 BUTTTT!!! Read it please... - Huawei Ideos X5 U8800

Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch buttons were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......

How to unbrick.
Caryaz said:
Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch buttons were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......
Click to expand...
Click to collapse
I can help you, I bricked my phone about a month ago and it took me 2 weeks to fix it. But I learned exactly how everything works and how to fix it. Give me some time and I will type a post and upload all the necessary files.

Partitioned
Have you ever partitioned your phone for CM10.1 or some other reason?

huawei u8800/51
Macgyver14 said:
Have you ever partitioned your phone for CM10.1 or some other reason?
Click to expand...
Click to collapse
Hi how are you,well i bricked my device and i cant make it get alive LOL.. its been pass 4 days since i bricked it.. today at night i took it and i connected it to my pc and buala.. the phone didnt turn on but it showed me a red led ligh and the touch BUTTONS were on,but the screen was black,and my pc recognized it like Qualcomm CDMA Technologies MSM i dont know what is that but now i know my phone is not dead.. what can i do in that case?? 5 days before my phone didnt turn on,no pink screen no nothing and now suddenly is recognized what is that?? HELP ME PLEASE......

Related

Need help ;(

HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!

[Q] trouble about note3 N9005

hello there
there is a problem with my galaxy note 3 that anybody dont know about that to solve it.I've got my phone last week and today when i wanted to plug in electricity for charging,the phone turned off and didnt turn on until now.i try for downloading mode but it doesnt do anything.even the red led at the top of the phone doesnt turn on.i dont have any sd cards in that.please help me.what should i do for that.
mohsen1090127 said:
hello there
there is a problem with my galaxy note 3 that anybody dont know about that to solve it.I've got my phone last week and today when i wanted to plug in electricity for charging,the phone turned off and didnt turn on until now.i try for downloading mode but it doesnt do anything.even the red led at the top of the phone doesnt turn on.i dont have any sd cards in that.please help me.what should i do for that.
Click to expand...
Click to collapse
Sounds like it has died, have you tried another power cable? try USB 2.0 and see if it turns on.
If its new take it back for warranty repair... Sounds like the MB got fried...

[Q] Not sure what the problem is

Hi guys,fresh noob here . I just got a used galaxy note 3 N900 unlocked but wont turn on.When I connect it to charger the red LED light comes on,the same happens when i connect to a PC,however the computer says device not recognized. The previous owner told me that,at some point,he managed to get it to boot up to the boot screen(didn't specify) but couldn't get past it.Later on,it wouldnt even turn on. Am just not sure if it is hardware failure or a brick,if it is a brick which kind of brick is it.I have tried booting into recovery and download mode but no response at all.Is there any obvious sign to know if it is a hardware failure?Please help before I take any action that would cost me and end up wasting time and money,Thanks and good job everyone .
wafweezy said:
Hi guys,fresh noob here . I just got a used galaxy note 3 N900 unlocked but wont turn on.When I connect it to charger the red LED light comes on,the same happens when i connect to a PC,however the computer says device not recognized. The previous owner told me that,at some point,he managed to get it to boot up to the boot screen(didn't specify) but couldn't get past it.Later on,it wouldnt even turn on. Am just not sure if it is hardware failure or a brick,if it is a brick which kind of brick is it.I have tried booting into recovery and download mode but no response at all.Is there any obvious sign to know if it is a hardware failure?Please help before I take any action that would cost me and end up wasting time and money,Thanks and good job everyone .
Click to expand...
Click to collapse
Try with USB JIG
You can purshase from ebay for a 1-2 $ or make it own.
Search youtube video how to make or go to some repair center and ask do have USB JIG.
It get it to download mode and then flash official firmware

My Huawei wont turn on ! HELP!

My mom bought this phone for me and it worked fine! I cracked the screen and it still worked. But one day I was charging it up and I started using it. When the battery ran out and I plug it in it doesn't want to turn on but when I plug it into my pc it connects but it doesn't recognize it. I tried installing drivers and still doesn't recognize it and it does not want to turn on. Since then I haven't tried to do something but bought a new phone but running back to it I want it working.. why would you want a phone sitting dead like that when I can sell it or something. Pls who knows a possible solution help me out man !

Alcatel one touch pop c7 7041x bricked I think

Hello there!
I haved a long time ago this phone, Alcatel one touch pop c7 7041x. Well it was a good phone. 2 years ago I dropped it in snow. I didn't know that I needed to turn it off and put it in rice.. After I dropped I put it to charge because the phone was turning off randomly.. And when I restarted it, at that logo "Alcatel one touch pop c7" appeared some red horizontal lines. After that the phone didn't turn on ever again. 2 years later, right now I am thinking how to revive it. I searched on this site a lot but I think my problem is worse because when I plug it in my pc or socket there appears that logo(sometimes), LED glowing and nothing else...not even that baterry low image. When it is plugged in my pc, windows makes that conecting and disconecting sound over and over again and it's not showing in my pc as a drive either. I think is hard bricked because It dosen't get past that logo. And I haved some photos on it.. These are now unrecovarable..I think..What's the problem? It is something really bad? Can I revive it? Software is corrupted? Maybe battery or charging port doesn't work? The memory chip is nearly dead? Display not working properly? I really want to recover the photos and restore the phone how it was a long time ago but I am afraid that I might brick it further. If someone responds to this thread and help me in reviving the phone and recovering the photos I will be very very happy!
I have the 7041x - B021405 version if this detail is needed. If you find a solution is fantastic!

Categories

Resources