Related
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Not the Whitestone then? I was almost about to pull the trigger on getting one for the S9+ but I'm hesitant now.
I've been using Whitestone for myself and my kids, although it has it's fragilities (cold, an snow can alter it) its the best i've tried. I've already ordered mine for the S9+... If i were you get a couple... just in case. As once you've tested it, you won't go back on the side glued ones. You just need to glue it well, and don't be in a hurry.
I've never had issues with touch sensitivity or peeling off (that's even nuts as it's literally glued to the screen, if you break the dome and need to peel it off you should be careful as it's glued it shatters and pieces can jump).
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
I have tried almost 5 brands but still did not get satisfactory result.
Just pre ordered the white stone. It was the best on the note 8.
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
I have used Zagg's Invisible HD shields on all my smartphones. I found them to be durable and compatible with many cases. Including cases for the S7 edge.Installing them is a little complex and you need to get it right the first time in order to avoid bubbles and the edges from lifting. I had to return the one that I installed on my wife's S7 edge once because a corner kept lifting and getting dust under it. All I had to do was return the old one and they send me a new one. Once I installed the replacement correctly, it has stayed on her phone for over a year without any issues. I'm waiting for it to be available in Amazon as they're usually discounted. The Zagg website indicates that they're sold out of their Invisible HD shield for the S9+
tamanaco said:
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
Click to expand...
Click to collapse
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Peanuttree said:
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
Click to expand...
Click to collapse
Will be interested to hear how this full adhesive version stacks up against the LOCA types.
Sent from my SM-G935F using Tapatalk
n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
Thanks for your reply... The complains put "some doubt" in my mind about the protector, I had not concluded that there was something inherently wrong with the OTAO. I posted here because I wanted to hear comments from other folks before I made my decision.
I didn't know that OTAO also made a protector that fully covers the screen, but after you mentioned it... I searched further and also found the OTAO Full Screen Coverage - Double Strong 3D in Amazon. At the same $12 price as the Case Friendly. At this price point, I might get one of each and test them with the case I'm going to use. I'm looking for a slim TPU cases from Spigen, EasyAcc, ESR and Caseologic. Currently, I use a Ringke Slim case with my S7 edge, but given the larger screen size of the S9+; I'd like a more protective setup. What case are you using on your S8 with the OTAO case friendly protector?... Thanks again.
xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Click to expand...
Click to collapse
https://www.zagg.com/us/en_us/invis...protector/glass-curve-elite-samsung-galaxy-s9
optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
xterminater07 said:
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
Click to expand...
Click to collapse
I'm using this one:
EyeO2 Screen Protector for Samsung Galaxy S8 Plus 9H Full Adhesive 3D Curved Tempered Glass Guard High Sensitivity HD Full Cover Edge Protector S8+ Protective Film Replacement Accessories Black 2 Pack https://www.amazon.com/dp/B074QN6ZB5/ref=cm_sw_r_cp_apa_jPHNAbDN9V2VR
And it's good.
Sent from my SM-N910C using Tapatalk
Well I've gambled on the zagg + defender combo, I hope they play nice.....
Will report back......
i've just ordered this can anyone recommend a decent case please.
https://www.amazon.co.uk/Protector-...=merchant-items&ie=UTF8&qid=1520177568&sr=1-3
I just ordered the Zagg. Saved £4 using promo code zagg10 at checkout. £36 felt easier to swallow then £40!
Sent from my SM-G935F using Tapatalk
n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Geekser said:
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Click to expand...
Click to collapse
What version of the OTAO are you using on your Note 8 [Case Friendly] or [Full Screen Coverage]? Are you using the "Updated" version that I believe has "full-adhesive"? Are you also using a case and if so... which one?
xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
I'll be working on a buyers guide today and tomorrow it will be on my channel.. In the mean time I posted a thread about a 10 dollar dome glass copy from the supplying factory and their are a few full adhesive glass protectors I'm tested.. All the others are the same generic ones just like the S8/N8
Bought the Whitestone Dome protector after hearing rave reviews about it. Paired it with the Spigen slim armor in all black, which is probably the most beautiful Spigen case in years.
Unfortunately, after a few hours I notice "spider cracks" forming at the bottom edge, and this morning a couple bubbles at the top edge. Turns out the lips on the slim armor is pushing against the protector ever so slightly. The sides are fine as far as I'm concerned. Just afraid that this is a "plague" that will eventually detatch the screen protector.
Other than that, it's a great screen protector and miles better than the ones I used to try on my s7 edge.
I've ordered the spigen air skin for my s9+ I hope it fits with my phone with my dome protector on.
Get the Spigen 593CS22943 Galaxy S9 Plus Case Neo Hybrid from Amazon. Works fine with the whitestone
welshandy2322 said:
Get the Spigen 593CS22943 Galaxy S9 Plus Case Neo Hybrid from Amazon. Works fine with the whitestone
Click to expand...
Click to collapse
Thanks for the suggestion, but I don't quite like the Neo hybrid series. Prefer something with a hard back. Used an ultra hybrid for my s7 previously but it turned yellow easily. Might consider cutting a little bit of the silicon on the slim armor instead...
I also purchased this whitestone some protector and a spigen air liquid case for a S9 plus.
Didn't applied the screen protector yet.
Now I am afraid of wasted my money with this expensive screen protector...
Enviado do meu SM-G965F através do Tapatalk
I have the Whitestone Dome glass on my Note 8 with the Spigen Armored clear case and it fits just fine. I'm hoping this holds to be true for the S9+ with that same case and glass.... I'll keep you guys posted. I'm thinking it should be fine though...
trenzterra said:
Bought the Whitestone Dome protector after hearing rave reviews about it. Paired it with the Spigen slim armor in all black, which is probably the most beautiful Spigen case in years.
Unfortunately, after a few hours I notice "spider cracks" forming at the bottom edge, and this morning a couple bubbles at the top edge. Turns out the lips on the slim armor is pushing against the protector ever so slightly. The sides are fine as far as I'm concerned. Just afraid that this is a "plague" that will eventually detatch the screen protector.
Other than that, it's a great screen protector and miles better than the ones I used to try on my s7 edge.
Click to expand...
Click to collapse
Hy Friends,
Here is The List !!! of compatibles cases with Whitestone Dome Glass.
https://forum.xda-developers.com/ga...s/case-compatibility-whitestone-dome-t3770259
Maybe help some of you!
Bye
I found this master list of cases that work and do not work with the whitestone dome glass on Reddit. I thought it would be helpful for those here as well! There seems to be a submission form for other cases that people have tested out and whether or not they fit, so it is continually updated.
Hope this helps others as it really stinks to spend so much on that screen protector only to have a case screw it up because it doesn't fit
mod edit - affiliate links list removed
Thanks,
I submitted a couple models that work using the link.
Spigen skin air works perfect with my dome protector ?
Nice! Looks like they were already added.
I pre-ordered the Moment case... it's a gamble.
Did the Moment wind up fitting? I was thinking of getting that with the Dome Glass screen protector as well. Haven't seen it on any of these lists.
I have the Spigen Neo hybrid. I noticed that the corners of the screen have a little gap between the screenprotector and the case. On the sides , the gap isnt noticable.
Is the Samsung Alcantara case definitely compatible? Anyone have this case with the whitestone dome?
redeus said:
Is the Samsung Alcantara case definitely compatible? Anyone have this case with the whitestone dome?
Click to expand...
Click to collapse
Yes I have that case for my S9+ and whitestone dome glass.
Sent from my Samsung SM-G965U1 using XDA Labs
Warning about the Moment case. The bottom 2 lips of the case touch the glass (the sides and top are fine). I don't know if I want to keep it on long enough to see if the bottom of the glass lifts....
Edit: The Moment case is not compatible with the Whitestone.
Your list says the OtterBox Pursuit series does not fit, this is false. I would say it is an exact fit with only a few millimeters of "wiggle room" but it does fit with no glass touching or conflicts with the case.
Anyone tried the Youmaker? https://www.amazon.com/gp/product/B07BMSMFC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Looks similar to the Unicorn Beetle and was wondering if it worked. I just ordered that and The Unicorn Beetle Hybrid: https://www.amazon.com/gp/product/B079BSJH8M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Figured Ive never really had a problem except when I had my S7 Edge that the screen shattered twice. Hoping cause its not as curved that itll be less likely to break as long as I have a decent case on it. But still want a screen protector.
Anyone have Vena vArmor case?
https://www.ebay.com/itm/Vena-vArmo...er-Shockproof-Stand-Case-/312153941342?_ul=HR
Poslano sa mog SM-T555 koristeći Tapatalk
https://forum.xda-developers.com/ga...innest-minimalist-case-kevlar-aramid-t3780879
pitaka case also works well
xbmoyx said:
Your list says the OtterBox Pursuit series does not fit, this is false. I would say it is an exact fit with only a few millimeters of "wiggle room" but it does fit with no glass touching or conflicts with the case.
Click to expand...
Click to collapse
It fits with pursuit? Mind sharing pics with it?
Whitestone Dome glass fits Galaxy S9+ perfectly with Incipio Dual Pro case ?
Sent from my Galaxy S9+ using XDA Labs
infamousvincci said:
It fits with pursuit? Mind sharing pics with it?
Click to expand...
Click to collapse
No problem, here ya go. Been installed for almost a month now with no issues, definitely the best combo for overall protection IMO.
xbmoyx said:
No problem, here ya go. Been installed for almost a month now with no issues, definitely the best combo for overall protection IMO.
Click to expand...
Click to collapse
I just went with this combo as well. Whitestone said that they haven't had any problems so far with this case so I got it. Now that both are in my hands, it seems initially that it might cause problems... However I don't think the case bezel actually sits fully flush with the glass. There's a soft, flexible barrier used to keep dust out, and I think this is what keeps the comparability. I can try posting a picture if needed but from what I'm reading around I haven't seen anybody claiming incompatibility with the Pursuit so far.
Of course, I just installed my Dome today so I'll let you guys know how the pursuit goes for me.
EDIT: Fits perfectly fine. No part of the case is really touching the glass. Just be careful when putting the case on is all.
Radboy16 said:
I just went with this combo as well. Whitestone said that they haven't had any problems so far with this case so I got it. Now that both are in my hands, it seems initially that it might cause problems... However I don't think the case bezel actually sits fully flush with the glass. There's a soft, flexible barrier used to keep dust out, and I think this is what keeps the comparability. I can try posting a picture if needed but from what I'm reading around I haven't seen anybody claiming incompatibility with the Pursuit so far.
Of course, I just installed my Dome today so I'll let you guys know how the pursuit goes for me.
Click to expand...
Click to collapse
Yes it seems like the case come close to the screen, but there is a gap with a barrier which is raised off the glass letting the WhiteStone dome fit.
I have Spigen Liquid Armor, Slim Armor, Ultra Hybrid Clear, and Air Skin.
I'm very sure Air Skin can fit, and also Slim Armor cannot fit.
I need to verify Liquid Armor and Ultra Hybrid can fit. Anyone also using the same type?
Master list indicate Liquid Armor cannot fit, and Ultra Hybrid can fit. But I need a review from the users direct if there's any.
Looking to order a compatible case with Whitestone dome glass. Looking for something that doesn’t sit right on top of the glass, just in case it pushes it up when in and out of the pocket and bag
Spigen. Using it with Whitestone. No issues.
Serpentinefire76 said:
Spigen. Using it with Whitestone. No issues.
Click to expand...
Click to collapse
Which spigen case?
I would hazard a guess that all. Except of course the ones that come with screen protector
Sent from my SM-G965F using Tapatalk
Serpentinefire76 said:
I would hazard a guess that all. Except of course the ones that come with screen protector
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
Not at all true. There are threads here with lists in them
Sent from my SM-G965U1 using Tapatalk
The rugged armor supposedly doesn't fit, which is a shame as i was using that one on each and every one of my smartphones. The tough armor fits perfectly though, and i am quite happy with it. The kickstand might be useful but doesn't seem to be that robust. Time will tell.
Another favorite of mine was the ringke onyx case. That one does not fit.
I've used the Spigen Neo Hybrid in the past and currently the UAG Monarch with the Whitestone and have had zero issues.
Ati75 said:
The rugged armor supposedly doesn't fit, which is a shame as i was using that one on each and every one of my smartphones. The tough armor fits perfectly though, and i am quite happy with it. The kickstand might be useful but doesn't seem to be that robust. Time will tell.
Another favorite of mine was the ringke onyx case. That one does not fit.
Click to expand...
Click to collapse
That's weird. The ringke onyx fit my s9+ perfectly.
tsuchiro said:
That's weird. The ringke onyx fit my s9+ perfectly.
Click to expand...
Click to collapse
I meant in combination with the whitestone dome glass. The upper lipp was just sitting too tight. I didn't want to risk the glass to peel up, so i deemed it as unfit.
You should have a look at this list, made for S9/S9+: https://docs.google.com/spreadsheets/d/11upU3Lh5bIZl3rPAoN23gCxBDU6MwkNZyEzY01HLUeE
Unfortunately, even if one case from company works, it doesn't mean that the rest are compatible. There are even cases of the same lineup (Spigen Ultra Hybrid) which are compatible and others aren't. In my opinion, if you want an ultra-thin case, then the Torras is the best bet. The Spigen Neo Hybrid is great (got one) for slim ---but adequate- protection. If you want the best protection possible, you should be looking at the UAG Monarch (expensive) or Otterbox Symmetry & Strada
Personally, I gave up on the Whitestone and now got myself an Otterbox Strada. Partly due to VR compatibility (I do AI research and now working on a VR project) and partly due to installation problems; once with the phone sitting tool was weirdly tight (compare to the 2nd kit I got) for the phone and the other it was my fault. Also, I got tired to looking for cases that are compatible. VR
I used that list posted above and this has been my experience so far.
I can confirm that UAG Plasma will push on the Whitestone.
The Spigen Neo Hybrid does work with Whitestone, but there's very little separation between case and Whitestone. The case does extend past the added thickness of the glass, so it will protect the Whitestone if placed face down.
Samsung Alcantara case doesn't seem to push the Whitestone despite seemingly touching. Perhaps the alcantara fibers makes it look worse than it actually is, but I didn't want to take the risk.
I'm currently using a Tech21 Evo Tactical and it gives the largest space to the Whitestone than any of the previous covers above. It's also a very thin case, yet has great drop protection. Lastly, this case provides more face down protection than the Neo Hybrid.
I went with the tech21 evo tactical due to @coiledwire post above
coiledwire said:
I used that list posted above and this has been my experience so far.
I can confirm that UAG Plasma will push on the Whitestone.
The Spigen Neo Hybrid does work with Whitestone, but there's very little separation between case and Whitestone. The case does extend past the added thickness of the glass, so it will protect the Whitestone if placed face down.
Samsung Alcantara case doesn't seem to push the Whitestone despite seemingly touching. Perhaps the alcantara fibers makes it look worse than it actually is, but I didn't want to take the risk.
I'm currently using a Tech21 Evo Tactical and it gives the largest space to the Whitestone than any of the previous covers above. It's also a very thin case, yet has great drop protection. Lastly, this case provides more face down protection than the Neo Hybrid.
Click to expand...
Click to collapse
Did you try the tough armor?
mys3 said:
Did you try the tough armor?
Click to expand...
Click to collapse
No, I haven't tried it yet. I'm usually a minimal case user, so UAG Plasma is just about as big as I'd want to go.
coiledwire said:
No, I haven't tried it yet. I'm usually a minimal case user, so UAG Plasma is just about as big as I'd want to go.
Click to expand...
Click to collapse
I've got the whitestone on perfect so in a aged to try other cases in case they disturb it!
mys3 said:
I've got the whitestone on perfect so in a aged to try other cases in case they disturb it!
Click to expand...
Click to collapse
Agreed. My Whitestone install is 99.9% perfect and I don't want a case to mess with it. I'm loving this tech21 case. Its pricy for what it is, but it works really well with the Whitestone, looks nice, and feels solid.
UAG monarch fits really well, plenty of space like the tech21 tactical
Has anyone tried the Griffin Survivor Strong Clear?
I can confirm the Whitestone Dome is compatible with the Griffin Survivor Strong Clear case.
Does anyone know if the mous cases are compatible?
Hello
Im going to buy a S10+ soon but I need to get the screen protector and case before hand...
The screen protector is obvious: Whitestone Dome Glass
The case not so much...I wanted the Spigen Thin Armor but it doesnt seem to be compatible with the Whitestone Dome Glass
I used in the past: https://www.amazon.com/gp/product/B00OSS12Z2 and it was great and worked for me.
Suggestions?
Have you looked at Armadillo Tek cases? I have one for my S10 and it works with glass screen protectors. Otterbox commuter I think it is works too as I have it on my S10+ with a hybrid glass screen protector. Finally Pelican brand cases are also glass screen protector friendly as I got one for my S10+ as well.
Tech 21 Pure Clear....10 ft drop protection and ultra slim.... I've dropped my phone many times now on various hard surfaces and no cracks or scratches....and I also have a 5 and 2 year old.....and those kids have also dropped tested my phone many times as well.....
Sent from my SM-G975U1 using Tapatalk