help me !
my redmi note 7 gets bricks.
it is dead.
What do I do?
I flashed rom miui gobla in miflash but chose clean all and lock.
At this time I cannot unlock the boot loader on my phone. Because OEM hasn't been unlocked yet. Is there a way for me to unlock the boot loader when my phone is bricked?
Please help me, I am very sad to help me!
Thank you very much
so sorry for bad english
nope, your phone is dead. either u bring it to a service centre, or buy a new phone. there is nothing u can do.
NightRaven49 said:
nope, your phone is dead. either u bring it to a service centre, or buy a new phone. there is nothing u can do.
Click to expand...
Click to collapse
Thanks for the reply but there is no other way pro. It really died.
Is there any way to flash to china rom because my phone is issued by china
thanks pro
do you try to use mi flash and use the fastboot method?, you can enter to fastboot?
Hello,
Can you enter in fastboot mode?
Try this fastboot version (attached), to enter in EDL Mode ("fastboot reboot-edl" or "Reboot.bat"), and flash again your original rom with MiFlash.
In EDL Mode you need "Qualcomm QDLoader HS-USB Driver"
https://androidfilebox.com/tool/qualcomm-qdloader-hs-usb-driver-32-bit-64-bit
If you can not enter "EDL Mode" in the previous way, you should try test point to enter EDL.
https://www.youtube.com/watch?v=XzknDcBovWw
If you can install your original ROM in EDL mode, you may have to install the ROM again in fastboot mode.
In the MiA2 this was done, first install the original ROM in EDL mode and then when you could start Android, enable USB debugging and reinstall the original ROM, but this time in fastboot mode.
Regards!!
im in same situation my phone is on 10.3.5 his box its in chinise, i try with test pointe but in mi flash tools say unauthorized for this opperation, in qfile or miraclee thender flash success but phone alway dead
Related
I was trying to flash China Developer rom before unlocking bootloader as it is a mandatory requirement.. All the content available for flashing of rom in locked bootloader states that it can not be flashed via fastboot mode. It can only be flashed through download mode in recovery or edl mode. But whenever I try to enter download mode or edl mode, my phone reboots and nothing happens ! Please help me out of this situation if anybody has faced this situation or know s how to resolve that issue kindly come forward and reply ! Thanks in advance
hi, flash latest developer rom(china/global).. if you currently on global stable, simply just download the global developer rom & you can flash it via phone.. apply for unlocking permission. once you get the permission sms wait for 8-10 days then try again with miflashunlock i hope you will be able to unlock the bootloader..
abhi.goel said:
I was trying to flash China Developer rom before unlocking bootloader as it is a mandatory requirement.. All the content available for flashing of rom in locked bootloader states that it can not be flashed via fastboot mode. It can only be flashed through download mode in recovery or edl mode. But whenever I try to enter download mode or edl mode, my phone reboots and nothing happens ! Please help me out of this situation if anybody has faced this situation or know s how to resolve that issue kindly come forward and reply ! Thanks in advance
Click to expand...
Click to collapse
Your problem is similar to me my phone has got into bootloop and for worst case scenario developer mode as well as oem is disabled . I can't flash using Miflash which doesn't show port COM10 as adb devices command doesn't show any device as in
Garu8 said:
Your problem is similar to me my phone has got into bootloop and for worst case scenario developer mode as well as oem is disabled . I can't flash using Miflash which doesn't show port COM10 as adb devices command doesn't show any device as in
Click to expand...
Click to collapse
i have successfully flashed cm13.. thanks for replying btw..
abhi.goel said:
i have successfully flashed cm13.. thanks for replying btw..
Click to expand...
Click to collapse
ok now after using deep flash cable method but received dummy.bin error on flashing
Hi everyone, i cant enter to EDL mode, i need it because my stock rom is unstable(All start with OTA update), after update it show me "unfortunately android.... has stopped " every 3-5 seconds. EDL works fine yesterday and i try to install fastboot rom, but since MiFlash get error when i install fastboot rom i cant reboot in EDL. Hope you can help me.
note: I try reboot trough fastboot and do same thing as the video.
youtube. com/watch?v=gPh1yE3or8g&feature=youtu. be
(Sorry for the video post, but i cant find something like this case in web and i really need help)
You can try load in fastboot, connect to pc and run edl.cmd from archive.
www28.zippyshare.com/v/sKankJGd/file.html
go to fastboot and type "Fastboot oem edl" then enter and you will find the device got into the EDL mode
Unlock your bootloader and flash a custom recovery is the best way
I have the same problem
Hi! I have the same problem! I can´t get to EDL mode, also I cant update with MiFlash anymore.
I´ve been searching for over a week for a solution but I can´t fix the phone.
I´ve done the following.
1. Bought the Redmi 3S phone from Gearbest, came with a rom with adware, I was unable to update the rom from the updater.
2. I downloaded an Official Fastboot ROM from the XIaomi website, then updated to latest version MIUI Official TeamVersion Stable ROM: V8.1.1.0.MALMIDI (MIUI8), without unlocking bootloader.
3. After succesfully updating the phone, Android starts but then I get a continuos error message and I cant do anything. Now I can only get to Fastboot Mode (EDL does not work anymore, even using Fastboot EDL mode). If I try to flash it again with Mi Flash I get Flash tz error.
4. I applied for unlocking, received the message after 48 hours but I am stuck on 50% with the error -current account is different from account info on the device xiaomi-
5. I am unable to update the firmware using fastboot mode, recovery mode or EDL mode, Unable to unlock the bootloader. Already tried several methods with no results.
Please help!
Thank you very much.
If your issue is just to go to EDL mode and get back Qualcomm 9008 port com why not to try the "cable trick" found for the redmi note3.
https://xiaomi.eu/community/threads...-edl-no-fastboot-no-logo-no-led-solved.34113/
See post n°22 and it is no risk to try it. The cable would be reusable.
You have also many other posts on the subject, just goole it.
Here's a really easy way to make a deep flash cable http://forum.xda-developers.com/xiaomi-redmi-3s/help/help-bricked-phone-t3510277/post70029683#post70029683
julianpaul said:
Here's a really easy way to make a deep flash cable http://forum.xda-developers.com/xiaomi-redmi-3s/help/help-bricked-phone-t3510277/post70029683#post70029683
Click to expand...
Click to collapse
Thanks! I will give it a try!
D3VI0US said:
go to fastboot and type "Fastboot oem edl" then enter and you will find the device got into the EDL mode
Click to expand...
Click to collapse
it reboots the device , unable to boot to edl mode
tetsumo said:
Hi! I have the same problem! I can´t get to EDL mode, also I cant update with MiFlash anymore.
I´ve been searching for over a week for a solution but I can´t fix the phone.
I´ve done the following.
1. Bought the Redmi 3S phone from Gearbest, came with a rom with adware, I was unable to update the rom from the updater.
2. I downloaded an Official Fastboot ROM from the XIaomi website, then updated to latest version MIUI Official TeamVersion Stable ROM: V8.1.1.0.MALMIDI (MIUI8), without unlocking bootloader.
3. After succesfully updating the phone, Android starts but then I get a continuos error message and I cant do anything. Now I can only get to Fastboot Mode (EDL does not work anymore, even using Fastboot EDL mode). If I try to flash it again with Mi Flash I get Flash tz error.
4. I applied for unlocking, received the message after 48 hours but I am stuck on 50% with the error -current account is different from account info on the device xiaomi-
5. I am unable to update the firmware using fastboot mode, recovery mode or EDL mode, Unable to unlock the bootloader. Already tried several methods with no results.
Please help!
Thank you very much.
Click to expand...
Click to collapse
I got same problem.. But I'am not yet get permision to unlock bootloader.. Please help me.. What can i do to flash my redmi 3s..
Just bought this phone and attempted to upgrade from 7 to 8 and before so i done few things such as disabling some google sh*t. It upgraded and stuck on booting screen, vibrating sometimes. How do i handle this ? XiaoMiFlash says : flash tz error. Also there's no recovery and download mode.
If you have updated to MIUI 8.1.1.0 then I am afraid you have no other option left than flashing fastboot rom with deep flash cable using test point method presuming you have locked BL. For more info visit http://en.miui.com/thread-310325-1-1.html
But if you are still on MIUI 7 then you can flash using Mi flashtool in EDL mode.
For entering edl mode press volume + and volume - button simultaneously( test mode) and after plugging in USB cable with PC enter in windows CMD:
PHP:
fastboot oem edl
. After that proceed with flashing using flash tool
.
you cant disable Music, Youtube, Chrome,blah blah,... but dont disable Google, it will cause bootloop.
i figured this out after 15 bootloops lol
What ?! What the is deep flash cable ?! I don't have one ! Maybe i should exchange my Redmi 3s in shop next monday. It's stuck at mi logo and 3 circles, vibrating frequently...
UPDATE : Phone enters some screen where shows phone and cable and link to Mi Pc Suite. I click recovery flash option, but i says that phone is up to date. When i click recovery, nothing happens. How do i force flash ? Maybe i will flash a recovery rom using this mode, it's visible via adb.
rahulbarai said:
If you have updated to MIUI 8.1.1.0 then I am afraid you have no other option left than flashing fastboot rom with deep flash cable using test point method presuming you have locked BL. For more info visit http://en.miui.com/thread-310325-1-1.html
But if you are still on MIUI 7 then you can flash using Mi flashtool in EDL mode.
For entering edl mode press volume + and volume - button simultaneously( test mode) and after plugging in USB cable with PC enter in windows CMD:
PHP:
fastboot oem edl
. After that proceed with flashing using flash tool
.
Click to expand...
Click to collapse
Phone won't enter EDL mode ! Just Mi logo and nothing else...
jakubekw1997 said:
Phone won't enter EDL mode ! Just Mi logo and nothing else...
Click to expand...
Click to collapse
I have given you the link about how to make deep flash cable by yourself. Xiaomi has locked EDL mode post MIUI 8.0.3.0. So you wont be able to flash normally in EDL or Emergency Download mode. Now you are in bootloop so either you can unlock your bootloader and flash in fastboot mode, in this case you have to wait bit longer or you can make a deep flash cable and flash in the mode you have mentioned i.e MI logo with PC suite sign.
Sent from my Redmi 3S using XDA Labs
One more device saved
rahulbarai, Dude, I love you, you saved my skin, thought my smartphone had the "bootloader" unlocked, because on the home screen it appears "unlocked" but it was locked, unlocked now I can resurect normally and use the device, thank you very much!
(URGENT) HARDBRICK ... Please help me. I installed a custom kernel in the AICP rom, but I installed it on the recovery partition. The phone now turns on but does not leave the leeco screen. It does not go into recovery or fastboot mode. I've downloaded the Qualcom QPST tool but I do not know how to use it or the files I need ... Does anyone have a solution?
Try this
https://forum.xda-developers.com/le-pro3/how-to/guide-return-to-stock-lock-bootloader-t3539513
ajegile said:
Try this
https://forum.xda-developers.com/le-pro3/how-to/guide-return-to-stock-lock-bootloader-t3539513
Click to expand...
Click to collapse
As said, the device does not leave the screen of the leeco, does not start in recovery and fastboot mode. So there is no way I can restore using TWRP. The device is recognized only by the qualcom tool. I need a guide on how to use it. Anyway, thank you for your time.
zapinho said:
As said, the device does not leave the screen of the leeco, does not start in recovery and fastboot mode. So there is no way I can restore using TWRP. The device is recognized only by the qualcom tool. I need a guide on how to use it. Anyway, thank you for your time.
Click to expand...
Click to collapse
Try to boot into fastboot from ADB and install a new twrp
My Mi 9T is stuck in "this device is destoryed" mode and I cannot access recovery
My bootlooader is locked and recovery is unaccessible. Please help me to unlock my phone if I can.
Coolness3579 said:
My bootlooader is locked and recovery is unaccessible. Please help me to unlock my phone if I can.
Click to expand...
Click to collapse
What u did that cause this?
Fastboot and miflash?
if the device has locked bootloader you have no way other than opening up thhe back glass and putting it on edl mode
BAYmustafa96 said:
if the device has locked bootloader you have no way other than opening up thhe back glass and putting it on edl mode
Click to expand...
Click to collapse
Ok thanks I will send it in to a shop where someone can do that
Connect phone to pc, start adb on pc...put phone in fastboot mode ( press volume - and power ) , type in adb
fastboot continue
After command, phone will reboot and boot system.
After that , you add mi acc and start unlock process.
If you reboot phone, you need to do this step again.
When you unlock bootloader, flash official rom or xiaomi.eu...
You could flash official xiaomi fastboot rom with Miflash tool: this flash recovery and MIUI also with BL locked.
Then you'll use miunlock tool to unlock bootloader
GGelmi
did your problem solved?