My Mi 9T is stuck in "this device is destoryed" mode and I cannot access recovery - Redmi K20 / Xiaomi Mi 9T Questions & Answers

My Mi 9T is stuck in "this device is destoryed" mode and I cannot access recovery
My bootlooader is locked and recovery is unaccessible. Please help me to unlock my phone if I can.

Coolness3579 said:
My bootlooader is locked and recovery is unaccessible. Please help me to unlock my phone if I can.
Click to expand...
Click to collapse
What u did that cause this?

Fastboot and miflash?

if the device has locked bootloader you have no way other than opening up thhe back glass and putting it on edl mode

BAYmustafa96 said:
if the device has locked bootloader you have no way other than opening up thhe back glass and putting it on edl mode
Click to expand...
Click to collapse
Ok thanks I will send it in to a shop where someone can do that

Connect phone to pc, start adb on pc...put phone in fastboot mode ( press volume - and power ) , type in adb
fastboot continue
After command, phone will reboot and boot system.
After that , you add mi acc and start unlock process.
If you reboot phone, you need to do this step again.
When you unlock bootloader, flash official rom or xiaomi.eu...

You could flash official xiaomi fastboot rom with Miflash tool: this flash recovery and MIUI also with BL locked.
Then you'll use miunlock tool to unlock bootloader
GGelmi

did your problem solved?

Related

Revert back to locked state after unofficial unlock (Redmi note 3 pro/SD)

Hi All, I have unlocked the bootloader the unnofical way and i am on global 7.1.7.0(LHOMICL) with twrp and root.
I now have recieved the official sms to unlock from xiaomi.
Already i had to open the phone 3 times to get into edl mode. I really dont wont to open the phone agian.
When i try to unlock the tool answers no need to unlock. I think this is because i flashed the adapted emmc_appsboot.mbn and boot.img thru fastboot.
Do i have to change te rom to another version before i try thru edl or fastboot? What is the best procedure to official unlock now because i read a lot of bricks if they try to revert back to original state.
Can some one give me a detailed guide? Thanx in advance.
You need to flash a fully stock edl ROM on top of your current setup.
This will wipe out your hacked bootloader and throw the original (still locked) one back onto your device.
Then just unlock as usual. I did the procedure myself today already as I got my unlock notification today as well.
Ok thnx for the info. I have changed this global rom 7.1.7.0 in great extend and dont wont to lose this setup.
So can I backup my current setup with twrp with the hacked bootloader.
Flash the complete global 7.1.7.0 in edl mode. Unlock with the unlock tool.
Root the rom and install twrp.
After this can i restore the backup with the hacked bootloader with twrp?
I dont know how the unlock tool of xiaomi works, so i could leave the official bootloader in place when i do the restore with twrp and only replace system and data partition or can i flash all the parts back with twrp to keep the unlock?
Wich procedure will keep the official unlock in place or will this unlock stick always?
davegrond said:
Hi All, I have unlocked the bootloader the unnofical way and i am on global 7.1.7.0(LHOMICL) with twrp and root.
I now have recieved the official sms to unlock from xiaomi.
Already i had to open the phone 3 times to get into edl mode. I really dont wont to open the phone agian.
When i try to unlock the tool answers no need to unlock. I think this is because i flashed the adapted emmc_appsboot.mbn and boot.img thru fastboot.
Do i have to change te rom to another version before i try thru edl or fastboot? What is the best procedure to official unlock now because i read a lot of bricks if they try to revert back to original state.
Can some one give me a detailed guide? Thanx in advance.
Click to expand...
Click to collapse
Plz could you help me and tell me where you got the hacked unlocked bootloader cause I bricked my redmi note 3 pro snap dragon and only only fastboot is available and when I try to flash it I get the message device locked boot locked can not flash and plz hobe me a detaild link and downloads and how to flash also I did not get the unlock code and how to get the locked one back z original plz help best regards
Plz indeed to know how to hack the bootloader cause I bricked my phone and I need to make it life
MrColdbird said:
You need to flash a fully stock edl ROM on top of your current setup.
This will wipe out your hacked bootloader and throw the original (still locked) one back onto your device.
Then just unlock as usual. I did the procedure myself today already as I got my unlock notification today as well.
Click to expand...
Click to collapse
please give a detailed tutorial how to do it. I am now in AOSP with unofficially unlocked bootloader. How to relock it again to unlock officially?
Relock Bootloader
I see many asking how to Relock Bootloader, especially those who had unlocked unofficially.
The steps to be followed are following:
(1) Turn on USB debugging for your phone;
Go to Settings -- About Phone --> Touch 7 times on "MIUI version" to Enable Developer Options.
Now go to Settings - Additional Settings - Developer Options --> USB debugging.
Enable USB Debugging and Connect to PC.
(2) Download Fastboot ROM (file extension .tgz or .tar) from
Code:
http://en.miui.com/a-234.html
(3) Boot into EDL
adb devices (to check it's connected)
adb reboot edl
(4) Use MI Flash Tool to Flash the Fastboot ROM
PS: It is assumed that person knows how to get drivers installed for phone if not already, use ADB command as well as know MI Flash Tool basics.
@BRoy_98 @ioosis @davegrond : hope this helps.
@MrColdbird Thanks for the tip
BRoy_98 said:
please give a detailed tutorial how to do it. I am now in AOSP with unofficially unlocked bootloader. How to relock it again to unlock officially?
Click to expand...
Click to collapse
Thx
Sent from my Redmi Note 3 using XDA-Developers mobile app
Unable to relock
Someone please let me know how to relock the bootloader.
I tried flashing the global rom using flash tool but still it says unlocked when i check it from fastboot mode.
anwar08 said:
Someone please let me know how to relock the bootloader.
I tried flashing the global rom using flash tool but still it says unlocked when i check it from fastboot mode.
Click to expand...
Click to collapse
On MiFlash, select folder of Fastboot ROM, then click on Advanced, and in fastboot script select flash_all_lock.bat. After it, close MiFlash then open it again and check in advanced if flash_all_lock.bat comes selected. If yes, close advanced box and flash ROM. Don't forget to close and open MiFlash after choose flash_all_lock.bat script, it's important step. And you can do it in Fastboot mode, don't need to go to EDL mode to flash the ROM.
andersonaragao said:
On MiFlash, select folder of Fastboot ROM, then click on Advanced, and in fastboot script select flash_all_lock.bat. After it, close MiFlash then open it again and check in advanced if flash_all_lock.bat comes selected. If yes, close advanced box and flash ROM. Don't forget to close and open MiFlash after choose flash_all_lock.bat script, it's important step. And you can do it in Fastboot mode, don't need to go to EDL mode to flash the ROM.
View attachment 3854529 View attachment 3854530 View attachment 3854531 View attachment 3854532
Click to expand...
Click to collapse
Am using the 32 bit beta version and there is no Advanced option
anwar08 said:
Am using the 32 bit beta version and there is no Advanced option
Click to expand...
Click to collapse
see if it's in Configuration.
warranty
does rooting redmi note 3 void warranty bcuz it has a locked bootloader and cannot root without unlocking it ????
and can we lock bootloader again for warranty claims ????
plzz help ???
ty.
Why can't we directly update the device..
Like after flashing miui ROM (7.1)then installing (8.1)....will the bootloader get locked....
?....somebody have any idea place help out
Q. Can the device be rooted without voiding warranty?
A. Yes, by unlocking the BL unofficially.
Q. Once rooted and on MiUI, can I update using Updater?
A. No! You'll lock your BL and end up in a bootloop. Instead, use the updater to download the zip file, reboot into recovery (TWRP or ZCX) flash the zip first and then the universal boot.img patched/lazy flasher and reboot to system.
I followed the method mentioned in the replies to relock the bootloader, i.e, flashed the fastboot rom in edl mode
But for some strange reason, when I entered the fastboot mode and checked whether the bootloader is locked or not by "fastboot oem device-info", it said "Device Unlocked: True"
The main problem came when I booted into the ROM; It broke all kinds of wireless connections. The wifi malfunctioned, the phone wouldn't read the SIM cards etc.
Is there a solution? Please help
Thanks

Softbrick REDMI 3S. Stuck at Mi Logo. Fastboot works. locked bootloader

Hai all , I am new here.
I need some help to unbrick my device. i tried almost all method and still no luck. the only method i havent tried is DFC, but i dont prefer to do it since its pretty complicated.
My device run rom Global Stable Miui 7 and i flashed Developer rom Global using EDL download mode.
there was an error and now my device stuck in Mi logo. I can still access Mi bunny fastboot ( vol down + power)
So far I have tried 3 methods
Method 1: reboot to fastboot mode, plug to pc, open ADB cmd prompt and type fastboot oem EDL. But no success because device is still locked bootloader.
Method 2: reboot to fastboot mode, plug in to pc, download fastboot EDL cmd from xda forum, unzip then run edll.cmd, device reboot to mi logo again.
Method 3: in Mi logo, plug in to pc, open cmd prompt, type Adb reboot edl, press enter but device cannot reboot to edl mode because it says I need to tap on confirmation dialog on device. But its not possible since device only load up to mi logo
Download the latest stable fastboot ROM from here http://en.miui.com/a-234.html then flash it.
Sent from my Redmi 3S using Tapatalk
If only it was that easy. I've tried 3 methods above but still no luck. Use Adb reboot edl, fastboot oem.
How to flash if its only stuck at mi logo
Because I had this exact same thing happened before. What I did was while it kept bootlooping at the Mi boot splash I held down Vol - + power until fastboot mode pops up. Then you'd be able to flash.
Sent from my Redmi 3S using Tapatalk
Trovies said:
If only it was that easy. I've tried 3 methods above but still no luck. Use Adb reboot edl, fastboot oem.
How to flash if its only stuck at mi logo
Click to expand...
Click to collapse
First off you cannot just unlock the bootloader easily, like in fastboot or anyhow, you need to follow the guides. And this is possible by the way only with a working Dev rom.
Well so now, you've to get miflash tool and flash either stock rom, or dev rom.
You simply hold power and volume down as long (can take some time) as it will show "fastboot" and some android art.
Then you follow the guides to flash either stock rom or dev rom using fastboot, and you're good to go.
I don't see why this wouldn't be working for you, try to stick exactly to what i said. If you don't know how to use Miflash then search at en.miui.com
Trovies said:
Hai all , I am new here.
I need some help to unbrick my device. i tried almost all method and still no luck. the only method i havent tried is DFC, but i dont prefer to do it since its pretty complicated.
My device run rom Global Stable Miui 7 and i flashed Developer rom Global using EDL download mode.
there was an error and now my device stuck in Mi logo. I can still access Mi bunny fastboot ( vol down + power)
So far I have tried 3 methods
Method 1: reboot to fastboot mode, plug to pc, open ADB cmd prompt and type fastboot oem EDL. But no success because device is still locked bootloader.
Method 2: reboot to fastboot mode, plug in to pc, download fastboot EDL cmd from xda forum, unzip then run edll.cmd, device reboot to mi logo again.
Method 3: in Mi logo, plug in to pc, open cmd prompt, type Adb reboot edl, press enter but device cannot reboot to edl mode because it says I need to tap on confirmation dialog on device. But its not possible since device only load up to mi logo
Click to expand...
Click to collapse
Did you unlock developer mode as in my case I am also stuck in bootloop and fastboot oem edl is not working as developer mode is disabled thus oem is also disabled.
Hey!
I had the same Problem.
Flashing with Miflash was unsuccessfull and then EDL was locked. You can check this when the device is in fastboot and send "fastboot oem edl". Then there may be the message that EDL is locked. In that case you have to build a "deep flash cable". It is pretty easy. You can check this tutorial:
http://en.miui.com/thread-310325-1-1.html
But I would build it another way: Just cut a USB cable and reconnect all wirepairs with the open copper. Now you can just put "ground" and "data+" togehther and follow steps 7 to 9. At point 10 you can just disconnect the wires "ground" and "data+" again, so that all wires are connected normally again. Now you are in EDL and can flash with MiFlash.

URGENT ! Bricked, no download, no recovery after upgrade attempt.

Just bought this phone and attempted to upgrade from 7 to 8 and before so i done few things such as disabling some google sh*t. It upgraded and stuck on booting screen, vibrating sometimes. How do i handle this ? XiaoMiFlash says : flash tz error. Also there's no recovery and download mode.
If you have updated to MIUI 8.1.1.0 then I am afraid you have no other option left than flashing fastboot rom with deep flash cable using test point method presuming you have locked BL. For more info visit http://en.miui.com/thread-310325-1-1.html
But if you are still on MIUI 7 then you can flash using Mi flashtool in EDL mode.
For entering edl mode press volume + and volume - button simultaneously( test mode) and after plugging in USB cable with PC enter in windows CMD:
PHP:
fastboot oem edl
. After that proceed with flashing using flash tool
.
you cant disable Music, Youtube, Chrome,blah blah,... but dont disable Google, it will cause bootloop.
i figured this out after 15 bootloops lol
What ?! What the is deep flash cable ?! I don't have one ! Maybe i should exchange my Redmi 3s in shop next monday. It's stuck at mi logo and 3 circles, vibrating frequently...
UPDATE : Phone enters some screen where shows phone and cable and link to Mi Pc Suite. I click recovery flash option, but i says that phone is up to date. When i click recovery, nothing happens. How do i force flash ? Maybe i will flash a recovery rom using this mode, it's visible via adb.
rahulbarai said:
If you have updated to MIUI 8.1.1.0 then I am afraid you have no other option left than flashing fastboot rom with deep flash cable using test point method presuming you have locked BL. For more info visit http://en.miui.com/thread-310325-1-1.html
But if you are still on MIUI 7 then you can flash using Mi flashtool in EDL mode.
For entering edl mode press volume + and volume - button simultaneously( test mode) and after plugging in USB cable with PC enter in windows CMD:
PHP:
fastboot oem edl
. After that proceed with flashing using flash tool
.
Click to expand...
Click to collapse
Phone won't enter EDL mode ! Just Mi logo and nothing else...
jakubekw1997 said:
Phone won't enter EDL mode ! Just Mi logo and nothing else...
Click to expand...
Click to collapse
I have given you the link about how to make deep flash cable by yourself. Xiaomi has locked EDL mode post MIUI 8.0.3.0. So you wont be able to flash normally in EDL or Emergency Download mode. Now you are in bootloop so either you can unlock your bootloader and flash in fastboot mode, in this case you have to wait bit longer or you can make a deep flash cable and flash in the mode you have mentioned i.e MI logo with PC suite sign.
Sent from my Redmi 3S using XDA Labs
One more device saved
rahulbarai, Dude, I love you, you saved my skin, thought my smartphone had the "bootloader" unlocked, because on the home screen it appears "unlocked" but it was locked, unlocked now I can resurect normally and use the device, thank you very much!

Huawei p9 lite

Hi Guys. I was trying to install TWRP recovery on my p9 lite (VNS-L31). The bootloader is unlocked, and so i downloaded the adb tool to flash the twrp recovery IMG to my phone. But once I enter the command adb reboot bootloader, the PC can't fiend my phone anymore. When I type adb devices, I doesn't appear anymore... Any suggestions??
Sent from my HUAWEI VNS-L31 using Tapatalk
You need to be in fastboot mode
Adb comand is not use on fastboot mode...
Just install adb driver on your PC.
download here
But how did you unlock your bootloader?
if u already in fastboot mod
don't used adb devices
use fastboot devices
Therand said:
Adb comand is not use on fastboot mode...
Just install adb driver on your PC.
But how did you unlock your bootloader?
Click to expand...
Click to collapse
I unlocked the bootloader using the Huawei website and the toolkit from rootjunky. I also had TWRP installed, but after my phone updated I lost both root access / SuperSU and TWRP. I can't flash anything at all, duo to not been able to get TWRP back
Sent from my HUAWEI VNS-L31 using Tapatalk
TYR0N said:
I unlocked the bootloader using the Huawei website and the toolkit from rootjunky. I also had TWRP installed, but after my phone updated I lost both root access / SuperSU and TWRP. I can't flash anything at all, duo to not been able to get TWRP back
Sent from my HUAWEI VNS-L31 using Tapatalk
Click to expand...
Click to collapse
try to unlock the bootloader again
Sent from my HUAWEI VNS-L21 using Tapatalk
Chibbo said:
try to unlock the bootloader again
Sent from my HUAWEI VNS-L21 using Tapatalk
Click to expand...
Click to collapse
There is no need to unlock it again, I can enter the bootloader and it says unlocked, and also Everytime I boot my phone it says "device unlocked and unsecure
I then get the option to eighter boot normal or enter erecovery
Sent from my HUAWEI VNS-L31 using Tapatalk
Chibbo is right.
Unlock bootloader again even if it already indicates unlocked.
This warning "bug" (bootloader already unlocked blabla...)
It normal after each big update to unlock bootloader again.
Right now I feel really stupid... I don't know what happened, and I did not unlock the bootloader again( I tried but it told me it was already unlocked) I can now use the / fastboot flash recovery command and it also tells me that the install was completed after 1.03 sec. But when I try to enter recovery my phone gets stuck on a site saying
Warning : Device unlocked and can't be trusted
---------------------------------------------------------------------
Your device is booting now...
I then have to press the power and volume button to get back to standard boot menu.
What is going on with my phone???
Sent from my HUAWEI VNS-L31 using Tapatalk
TYR0N said:
Right now I feel really stupid... I don't know what happened, and I did not unlock the bootloader again( I tried but it told me it was already unlocked) I can now use the / fastboot flash recovery command and it also tells me that the install was completed after 1.03 sec. But when I try to enter recovery my phone gets stuck on a site saying
Warning : Device unlocked and can't be trusted
---------------------------------------------------------------------
Your device is booting now...
I then have to press the power and volume button to get back to standard boot menu.
What is going on with my phone???
Click to expand...
Click to collapse
So you flashed twrp. Okay, you can try press power until phone restarts and when phone restart press volume up. You need to press it after vibration. And hold volume up until on screen appear "Your device booting now..." and phone should boot in recovery.
Or
You can do it from cmd. Boot phone to fastboot > conect phone > open cmd where you flashed recovery > type command "fastboot reboot recovery name_of_recovery.img"(recovery.img mast be in folder where is cmd to do that).
See if this helped you.

what to do if bootloader is unable to unlock and mobile is dead?

3 months back i hv flashed fastboot rom successfully. but now i stuck with different problems with no solution
1) mobile is dead, when i hold power button mobile screen blink for a second and off again
2)when mob is dead i cant go in developer option and do all that stuff
3)in fastboot mode when i type command "fastboot oem unlock" it shows error
4)when bootloader is locked i cant flash fastboot rom through mi flashtool
this all happen because of choosing wrong patched_boot file at the time of installing magisk manager.
cmd cammand only recognize my device but cant unlock. i find only one solution that is test point method. before i proceed to that need suggestion from u gye's should i go for testpoint or to service center coz mobile is still under warranty.
You can flash stock ROM in edl mode with locked bootloader.
Put phone in fastboot mode and type "fastboot oem edl".
You should be able to flash stock ROM with Miflash. If your device is not recognised update your drivers. Google for qualcomm qloader drivers.
Next time before flashing a modified boot.img try to only boot it and see if it works.

Categories

Resources