Related
Hi all
I've just found and checked solution for many of you who BRICKED they loved TG.
I did it on TG01, dont have TG01A - so this have to be checked by owners.
I bricked my TG 5 times to be sure its working
Needed tools: http://u.115.com/file/f7fcb79872
TG software
TGTool 1.3
TG Downloader
TG drivers
TG have to be DISCONNECTED from PC!!!!
1. You need to be sure you have charged battery.
Use fried TG or some external charging solution.
2. Install TG Downloader
Before you will install application be sure that TG is NOT CONNECTED to PC.
Install Downloader and click next. Application should install TG01W drivers.
3. Prepare bin file.
tgtool -dec TG01WP_5005000176.tsw tg01.bin
3. Open Downloader as adimi (Vista)
4. Click on Browse and select tg01.bin. App will inform you about problem with version but accept.
Now connect your TG with charged battery to PC. Windows should start install drivers and new device Toshiba DL and some ports. After installatin click "Change Port" at Downloader and choose "Toshiba Download Port" and click "Download Mode". App will inform "Faild to open port" click OK and click "Downloade Mode" again. On status bar app will inform Done and LED on TG will start to be white.
Click on "Start Download" and go to make small coffe. TG's LED will start to blink on many colours and its correct.
Wait till appp restart your TG.
And you loved device is working again.
Have nice day
where is the softwares?
Found it here http://www.4shared.com/file/AK6TIAwK/TG_Downloader.html
Laserek_Poland said:
Found it here http://www.4shared.com/file/AK6TIAwK/TG_Downloader.html
Click to expand...
Click to collapse
thx!i will try and report!
yeahhhhh !!!
can someone confirm this?
anyway...i can't find the tg drivers...
where to find them?
or operation will install drivers automaticly?
Auto - install app and drivers will be installed
Great!
it works!
this is the TG01'S cable flashing method and way to saving bricked TG01S
THX,very nice!
Thank so much Laserek_Poland, but your link is invalid, please check again.
Great!!!
If this method works then can it be applied for other things?
Yeah the link is no longer valid, if possible you or FFBoy could repost the file/or complete set of files it would be great, the fear of flashing would be over for most of us
Depends what do you need.
Generally its to up broken TG.
As for SW will make my 4shared and will share
I deleted my setup and asked ff... to share application he downloaded.
ffboy2009 said:
Great!
it works!
this is the TG01'S cable flashing method and way to saving bricked TG01S
THX,very nice!
Click to expand...
Click to collapse
Hey ffboy2009, would you uploaded somewhere program because the link does not work.Thanks.
After he will update I attach it to first post
a new link would be good, cant wait to unbrick my device
seems like there are many of us brickowners waiting for that link..
plaease upload tg downloader asap.
many thanks
nekicowek said:
seems like there are many of us brickowners waiting for that link..
plaease upload tg downloader asap.
many thanks
Click to expand...
Click to collapse
Hi Laserek_Poland, can you check on your PC, looking for some file as .inf file to choose driver and send for us, many mem need your file to unbrick our Tgs phone, many thanks
Laserek_Poland said:
Found it here http://www.4shared.com/file/AK6TIAwK/TG_Downloader.html
Click to expand...
Click to collapse
Thanks for the guide. We are waiting for the link.
Laserek_Poland said:
I deleted my setup and asked ff... to share application he downloaded.
Click to expand...
Click to collapse
Where did you find it, any clue?
Hello
I installed the cm 10 with the cm 10 kernel. All went fine , only when i'm trying to open gallery it shows ' no storage , no external storage available'
The same problem when i open camera.
I read some treads of this problem and they say something about del the .nomedia on root folder. But i cant find that file. And is this the solution? Or is there an other solution?
gohigher123 said:
Hello
I installed the cm 10 with the cm 10 kernel. All went fine , only when i'm trying to open gallery it shows ' no storage , no external storage available'
The same problem when i open camera.
I read some treads of this problem and they say something about del the .nomedia on root folder. But i cant find that file. And is this the solution? Or is there an other solution?
Click to expand...
Click to collapse
I have found the solution my self. I flashed the stock rom and started all over again. Now i dont have any problems.
A spanish htcmania user with a german Moto G has received a new OTA (176.44.1.falcon-umts.retail.en.de), apparently it fixes otg, and pendrives can be used as they were in 4.3, with regular file managers.
Thanks to basurado for his image.
Changelog:
Fixed temporary cellular network loss
Fixed an issue which could lead to temporary loss of cellular network service for a small number of Moto G customers.
Fixed wallpaper cropping issue
Fixed an issue which could cause the home screen wallpaper on some devices to be cropped after rebooting the phone.
Resolved USB OTG support issue
Resolved a USB On The Go support issue that prevented Moto G from writing data to a connected USB storage device.
Fixed voice call volume issue
Fixed an issue where the volume of voice calls heard through the device earpiece could gradually become too low.
cesc1972 said:
A spanish htcmania user with a german Moto G has received a new OTA (176.44.1.falcon-umts.retail.en.de), apparently it fixes otg, and pendrives can be used as they were in 4.3, with regular file managers.
Thanks to basurado for his image.
Click to expand...
Click to collapse
OK, found the thread on htcmania and I can see your posts there but I don´t speak Spanish. Can you please ask basurado to extract and post the zip?
drfr said:
OK, found the thread on htcmania and I can see your posts there but I don´t speak Spanish. Can you please ask basurado to extract and post the zip?
Click to expand...
Click to collapse
I don't think the ota can be pulled if he has already updated, can it?
cesc1972 said:
I don't think the ota can be pulled if he has already updated, can it?
Click to expand...
Click to collapse
No, it´s too late. But he could re-flash
http://sbf.droid-developers.org/download.php?device=14&file=811
and when OTA notification comes again he could refuse to install it and then look into /cache for the zip.
The exact procedure?
drfr said:
No, it´s too late. But he could re-flash
http://sbf.droid-developers.org/download.php?device=14&file=811
and when OTA notification comes again he could refuse to install it and then look into /cache for the zip.
Click to expand...
Click to collapse
Could you please explain the procedure in a little more detail?
Here is a link to my gdrive, where i've uploaded the New ota update. I know the filename is wrong, but this is the ZIP my moto g downloaded for 176.44 ota update german moto g.
Cannot apply it, because i don't have the original kernel and recovery.
https://docs.google.com/file/d/0B_zBwPk95Z1jcThaNmo3Yk1uU1U/edit?usp=docslist_api
Sent from my XT1032 using xda app-developers app
Alright I flashed it and now my system version is 176.44.1.
Thanks a lot for zip.
... aaaand OTG USB storage works! Nice patch from Moto! No need for Stickmount anymore.
drfr said:
Alright I flashed it and now my system version is 176.44.1.
Thanks a lot for zip.
... aaaand OTG USB storage works! Nice patch from Moto! No need for Stickmount anymore.
Click to expand...
Click to collapse
Can you please check if unmounting works good? There's an option under Settings/Storage but using it always results in a persistent notification saying something like 'USB storage removed. Please insert new media'. Unplugging the USB drive without unmounting results in an error too!
pratik11 said:
Can you please check if unmounting works good? There's an option under Settings/Storage but using it always results in a persistent notification saying something like 'USB storage removed. Please insert new media'. Unplugging the USB drive without unmounting results in an error too!
Click to expand...
Click to collapse
I unplugged without unmounting and no problem here.
Edit: sorry, now I can see the same behaviour.
... adding screenshots
drfr said:
I unplugged without unmounting and no problem here.
Click to expand...
Click to collapse
Hmm...Well my XT1033(maybe they have different patches for different devices) with ES File Explorer shows an error.
I would check with Total File Commander and see if it exists. Meanwhile can you say how your USB drive is formatted ? I mean the file system ?
pratik11 said:
Hmm...Well my XT1033(maybe they have different patches for different devices) with ES File Explorer shows an error.
I would check with Total File Commander and see if it exists. Meanwhile can you say how your USB drive is formatted ? I mean the file system ?
Click to expand...
Click to collapse
I edited my previous post. I get those errors too, sorry.
drfr said:
I edited my previous post. I get those errors too, sorry.
Click to expand...
Click to collapse
So the problem does exist in all variants. I was reading through Moto X forums earlier and it has the same bug too
Here´s another new thing, new values were added. Personally I´m glad that
there´s now 0,25x option because it solves the problem with dialer and 0,5x was too much for me.
Edit: sorry, missed Gravitybox silent tweak.
Just bumping this up.
Edit: @cesc1972
Just thought you might want to edit the title of your post to something more specific - add date or system version, because I feel it didn´t get as much attention as it deserves.
Also, besides the OTG fix there´s seems to be an improvement in radio, which was brought to attention by @lost101 in his thread:
http://forum.xda-developers.com/showthread.php?t=2649763
How to install that update via the Option Systemupdate without root and cwm? Whats the Name of the File and the right folder to move the file to force the update?
ps: I copied the zip into the root folder of sdcard, made a reboot and searched for New update. Unfortunately nothing was found. From 4.3 to 4.4.2 that procedure worked fine.
pratik11 said:
Hmm...Well my XT1033(maybe they have different patches for different devices) with ES File Explorer shows an error.
I would check with Total File Commander and see if it exists. Meanwhile can you say how your USB drive is formatted ? I mean the file system ?
Click to expand...
Click to collapse
USB works with fat32 system only. No NTFS support
If you connect NTFS pendrive it will ask for format.
Sent from my XT1033 using Tapatalk
drfr said:
Here´s another new thing, new values were added. Personally I´m glad that
there´s now 0,25x option because it solves the problem with dialer and 0,5x was too much for me.
Click to expand...
Click to collapse
What was the problem with the dailer? was it blank screen on 1st call?
Sprint82 said:
How to install that update via the Option Systemupdate without root and cwm? Whats the Name of the File and the right folder to move the file to force the update?
ps: I copied the zip into the root folder of sdcard, made a reboot and searched for New update. Unfortunately nothing was found. From 4.3 to 4.4.2 that procedure worked fine.
Click to expand...
Click to collapse
Go to recovery and try "update from sdcard" and it should do I guess.
cpuspeed said:
What was the problem with the dailer? was it blank screen on 1st call?
Click to expand...
Click to collapse
I mean if you don´t use any transition effects (I always diasable them, no reason to deliberately slow down the UI), the dialer or phone app behaves like this: when you start it (and it wasn´t already running in the background), what you see by default are the contacts. If you tap dialpad icon on the bottom, dialpad won´t start just the icon disappears and you have to tap two more times to show the dialpad. You can remove this behaviour when you set transition effects to something more than 0x. On previous builds, minimal value was 0,5x which was far too much for me. Now with this new patch there is 0,25x option as well which is acceptable. But the dialpad bug is still there when you turn transitions off.
---------- Post added at 02:14 PM ---------- Previous post was at 02:10 PM ----------
Sprint82 said:
How to install that update via the Option Systemupdate without root and cwm? Whats the Name of the File and the right folder to move the file to force the update?
ps: I copied the zip into the root folder of sdcard, made a reboot and searched for New update. Unfortunately nothing was found. From 4.3 to 4.4.2 that procedure worked fine.
Click to expand...
Click to collapse
tmacher said:
Go to recovery and try "update from sdcard" and it should do I guess.
Click to expand...
Click to collapse
Yep, that´s right, now it won´t work if you just put in sdcard and reboot. You have to go to recovery (stock one of course).
Hi,
I am currently following this 'How-to' guide here: https://forum.xda-developers.com/att-s7-edge/development/howto-update-galaxy-s7-edge-firmware-to-t3541329
However, when I get to trying to Sideload 'v8 (G935AUCS4APJ4) to unreleased (G935AUCU4BQA4) update file' - it says it 'cannot read *filename*'. I've visited the troubleshooting link in the OP's post, but to no avail. Tried everything, new USB Cable, different port, different ADB drivers etc.
I'd like to say that the problem lies with the file itself, but having seen other people have success with it, means it must be a problem on my end.
Do any of you have any suggestions on how to fix this? If possible, can anyone link a new upload of it?
For reference: I own the US model, G935AUCS4APJ4 is what I am on now. I am using the Sideload method as I don't have an SD Card. Any help is appreciated.
Thanks.
NoogleGexus said:
Hi,
I am currently following this 'How-to' guide here: https://forum.xda-developers.com/att-s7-edge/development/howto-update-galaxy-s7-edge-firmware-to-t3541329
However, when I get to trying to Sideload 'v8 (G935AUCS4APJ4) to unreleased (G935AUCU4BQA4) update file' - it says it 'cannot read *filename*'. I've visited the troubleshooting link in the OP's post, but to no avail. Tried everything, new USB Cable, different port, different ADB drivers etc.
I'd like to say that the problem lies with the file itself, but having seen other people have success with it, means it must be a problem on my end.
Do any of you have any suggestions on how to fix this? If possible, can anyone link a new upload of it?
For reference: I own the US model, G935AUCS4APJ4 is what I am on now. I am using the Sideload method as I don't have an SD Card. Any help is appreciated.
Thanks.
Click to expand...
Click to collapse
I had the exact same problem as you, which is strange because I've used ADB on the same setup (same cable, port, phone, OS, drivers, etc.) to sideload packages with no issue. It's such a hard issue to solve, as even RAM/space requirements could cause it.
Long story short, nothing fixed the problem for me either. I'd trust that your file is fine - I don't think you need to re-download it.
Sadly, I think your best option is just buying a cheap SD card. It sucks, but sideloading the package from the SD card via recovery worked perfectly for me.
As was said previously, use an SD card.
NoogleGexus said:
Hi,
I am currently following this 'How-to' guide here: https://forum.xda-developers.com/at...to-update-galaxy-s7-edge-firmware-to-t3541329
However, when I get to trying to Sideload 'v8 (G935AUCS4APJ4) to unreleased (G935AUCU4BQA4) update file' - it says it 'cannot read *filename*'. I've visited the troubleshooting link in the OP's post, but to no avail. Tried everything, new USB Cable, different port, different ADB drivers etc.
I'd like to say that the problem lies with the file itself, but having seen other people have success with it, means it must be a problem on my end.
Do any of you have any suggestions on how to fix this? If possible, can anyone link a new upload of it?
For reference: I own the US model, G935AUCS4APJ4 is what I am on now. I am using the Sideload method as I don't have an SD Card. Any help is appreciated.
Thanks.
Click to expand...
Click to collapse
You need to place in *filemane* file you download and rename to .zip. In example if you name downloaded file update.zip you should wrote " adb sideload update.zip" w/o qotes.
Good luck.
Sent from my SAMSUNG-SM-G935A using XDA Premium HD app
sorry for my english from google translator
device:
quad core T3 All Winner-rom 16Gb DDR3 2GB-1024x600
Kernel Version:
Linux 3.10.65-Tue Nov 13
Os Version:
BSP 2.4.4.3.12-IVT-181113
Mcu Version:
20180911-1-KC1-24
I have tried to root my device by various methods without success, until using kingroot v4.9.6.151 and in one of the multiple reboots I have alone achieved a nice bootlop since it does not advance beyond the bootanimation of Android.
After many searches on Google and being very lucky, in one of my tests I managed to enter Stock Recovery through an external keyboard connected by USB.
but even doing a wipe data/factory reset and wipe cache partition continuos with the same problem.
so the only way out would be to reinstall the firmware through Recovery but I do not have it and I cannot contact the seller.
Could someone help me or give some information about a firmware compatible with my device?
To provide more information, I leave you some images that I took before trying to root.
greetings and thank you all very much.
drive.google.com/open?id=145UzndQbMbHk0ttSuqyBauC6p8blGCu_
drive.google.com/open?id=1PrYaa-4MeJzB0u6fDTizIGaRKGJTNvR7
drive.google.com/open?id=1F104GdzpTkQu2ql2sypQ7lOUKX5ZQnXd
drive.google.com/open?id=1flR0AWc4LXGJJaYhTlMrpiCcOtgVStGM
drive.google.com/open?id=1AM_jszgv-6gVrwqT-6CZxQdmQcAc_6zh
drive.google.com/open?id=1wqZo8I8QbEEN9qlWzn3aPUJZhm_g5tsd
my device problem is same but my device is quad core T3 All Winner-rom 16Gb DDR3 GB-1024x600
model has 9 inch multimedia in my car I have returned to the factory settings but the settings are not made. radio module canbuster module do all the settings but it does not save when i go back and look, the settings that are not settings are not saved. can you help with the software according to my device. I'm logging into recovery mode
ROM to install the USB device that I have not seen s ota do not see SD card
www . youtube . com /watch?v=-IJZv9C5bRI
www . youtube . com /watch?v=vJI6LqB0TQY
www . youtube . com /watch?v=RuPOGHUqPQQ
secretgol said:
my device problem is same but my device is quad core T3 All Winner-rom 16Gb DDR3 GB-1024x600
model has 9 inch multimedia in my car I have returned to the factory settings but the settings are not made. radio module canbuster module do all the settings but it does not save when i go back and look, the settings that are not settings are not saved. can you help with the software according to my device. I'm logging into recovery mode
ROM to install the USB device that I have not seen s ota do not see SD card
www . youtube . com /watch?v=-IJZv9C5bRI
www . youtube . com /watch?v=vJI6LqB0TQY
www . youtube . com /watch?v=RuPOGHUqPQQ
Click to expand...
Click to collapse
I solved the problem I opened the recovery mod and I installed this rom
os_update_KC1C0101-N36-2.4.4.3.12_20190502_092902_b1
excuse my English translator.
thanks for answering I will try to test the same firmware. I'm glad that aya managed to solve your problem.now i am trying to implement bootable image via micro SD card using phonix card software.
I have managed to start an image of android 6.0.1 successfully although currently nothing else works no bluethoot, no music,no radio, no wifi ...
I also do not know if it is possible to access the flash memory from the bootable image through Phoenix card to be able to flash from the terminal the Boot.img of a 7.1.1 rom since I think that the integrity of my flash memory is still intact it is only damaged boot.img partition when trying to root. so maybe hopefully if I could restore it it would reboot.
I found a firmware compilation of allwinner T3 but I can't find one compatible with my device in .img format to be able to boot with softare phoenix card link here: disk.yandex.ru/d/07ru92rb3HEh73
Edit:
I have found and managed to flash the firmware os_update_KC1C0101-N 36-2.4.4.3.12_20190502_092902_b1
but even with problems android starts well and everything seems to work except the Bluethoot and the Wifi
even so so many thanks at least I'm already closer to the stock firmware.
alberto 755 said:
excuse my English translator.
thanks for answering I will try to test the same firmware. I'm glad that aya managed to solve your problem.now i am trying to implement bootable image via micro SD card using phonix card software.
I have managed to start an image of android 6.0.1 successfully although currently nothing else works no bluethoot, no music,no radio, no wifi ...
I also do not know if it is possible to access the flash memory from the bootable image through Phoenix card to be able to flash from the terminal the Boot.img of a 7.1.1 rom since I think that the integrity of my flash memory is still intact it is only damaged boot.img partition when trying to root. so maybe hopefully if I could restore it it would reboot.
I found a firmware compilation of allwinner T3 but I can't find one compatible with my device in .img format to be able to boot with softare phoenix card link here: disk.yandex.ru/d/07ru92rb3HEh73
Edit:
I have found and managed to flash the firmware os_update_KC1C0101-N 36-2.4.4.3.12_20190502_092902_b1
but even with problems android starts well and everything seems to work except the Bluethoot and the Wifi
even so so many thanks at least I'm already closer to the stock firmware.
Click to expand...
Click to collapse
firmware os_update_KC1C0101-N 36-2.4.4.3.12_20190502_092902_b1
https://yadi.sk/d/Dz9aThzMlze1ZA
everything is working just BlueTooth not working
Thank you so much for your help.
I have installed it and everything seems to work except the wifi and the bluetooth.
I have tried reviewing a system.log to find the problem using the liveboot.apk program and it highlights a problem.
in the beginning of android when starting the load of the wifi controller located in /vendor/modules/8723bs.ko it tries to read the file / proc / nec / wireless
and throws "file read error" so I think some memory paths nand
they are not reinstalled with the firmware and my device has corrupted memory parts.
In the Russian forum of 4pda.ru there is a lot of information, although I cannot translate it correctly, I am trying to find some firmware that will restore the partitions completely. See if I can get everything to work correctly.
at 4pda.ru they talk about a hardware way using the phoenix suite program and a complete firmware file in .img format
greetings and thank you very much for your help.
alberto 755 said:
Thank you so much for your help.
I have installed it and everything seems to work except the wifi and the bluetooth.
I have tried reviewing a system.log to find the problem using the liveboot.apk program and it highlights a problem.
in the beginning of android when starting the load of the wifi controller located in /vendor/modules/8723bs.ko it tries to read the file / proc / nec / wireless
and throws "file read error" so I think some memory paths nand
they are not reinstalled with the firmware and my device has corrupted memory parts.
In the Russian forum of 4pda.ru there is a lot of information, although I cannot translate it correctly, I am trying to find some firmware that will restore the partitions completely. See if I can get everything to work correctly.
at 4pda.ru they talk about a hardware way using the phoenix suite program and a complete firmware file in .img format
greetings and thank you very much for your help.
Click to expand...
Click to collapse
I want to try a different software, I will try it soon.
//cobaltr4.ru/download/1041/
Thank you.
I have tested that firmware but it gave an error of 77% and I had no way to install it.
Finally I found in another thread information from the friend Ahmed68 and thanks to his valuable information I finally found a firmware compilation from the Russian website 4pda.ru.
As well as the procedure guide to flash the firmware through the Phoenix Suite program.
using this procedure I have flashed the Rom of android 8.1 and after finishing finally !! It has started correctly and I also have Root, Wifi, Bluetooth, Radio, Sound, Gps again ... Everything seems to work perfectly now and with Android 8.1 so perfect.
thank everyone for the help provided.
I leave you the compilation of Firware are and the information where it talks about how to proceed para instalar android 8.1 en mi equipo gacias a ahmed68.
thread with information about updates: https://forum.xda-developers.com/an...u-android-update-to-9-0-allwinner-t3-t3977285.
Collected threads From the information provided in different threads and forum 4pda.ru by fellow ahmed68 on how to use the program phoenixsuit. https://forum.xda-developers.com/showpost.php?p=80491527&postcount=20.
firmware compilation for allwinner.
https://disk.yandex.ru/d/whRSX-xqlUynTA
o
https://disk.yandex.ru/d/07ru92rb3HEh73.
Greetings to all and thank you very much. We can give the thread closed.