Related
Hi folks, i'm looking for 2 days a way to solve my DHD problem:
It can't boot anymore. It pop up the "htc quietly brilliant" screen, play the boot sound and, start this step again, and again, and again...
So I'm googling a LOT about how to solve this, if exist a way to restore the original rom. Because i'm thinking that was the problem, my original rom is gone.
That happens when i try to install 3 softwares from appbrain, my device got freeze and i hit the power button to reset. So, after that, my device is gone.
So i came here, to ask you folks: There is a way to recover the original rom ? Without send to warranty (because it spend something like 1 month here).
I'm not a mobile hacker or something, i'm just trying to be happy with my device.
Thanks a lot and sorry for my poor english!!
Perhaps try booting to the bootloader, by holding Power + Volume down button. From there, you should be able to do a factory reset, which may or may not fix your problem. Worth a shot at least, imo
And if it does not work when you do a factory reset, you can use a rom.zip from HTC RUU to restore your phone.
Now the important thing is to know which HTC rom you are running. If it is unbranded, 1.72.405.3 is a sure shot. Download the RUU.exe from Stock roms thread in android development subforum, and run it. When the window pops up, open run prompt, and type: "%TEMP%". Then search for rom.zip, copy it to your desktop, rename it to PD98IMG.zip and put it to your SD card (I hope that you have a card reader). Then just reboot to bootloader as tmh described, and watch the magic happen
Then if your phone is branded, you can still use the same technique to make PD98IMG.zip, but you have to get the RUU that matches your branding. There are lots of RUUs in android development subforum, just search.
Hi guys,
thanks a lot for quik reply!
I perform the procedure indicated by tmh, but without lucky ;\
I think it is unbranded. I buy it at Portugal and i'm using at Brazil right now.
I'll perform your tip jkoljo.
I'll post a repply to let people know if it works or not.
Thanks a lot!!
Hope the advice the last guy gave helps , a factory re set may work fine and fix the issue. Iv had 3 dhd since the day of release , the second one I had wouldn't switch on, had it replaced by Vodafone . Not sure weather or not they will give you a new one . Hope u get it fixed
Sent from my Desire HD using XDA App
I'm not sure if i got cover from warranty.
Right now, my "PROOF OF PURCHASE" is at europe, and i'm at america, so i must get this work again by myself, or pay (some expensive value, i think) for htc support.
I found those ROM version:
RUU_Ace_HTC_WWE_1.72.405.3_R2_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163262_signed.exe 04-Jan-2011 12:41 285M Windows executable file
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
but i'm not sure about "WWE". What it means?
dogasantos said:
I'm not sure if i got cover from warranty.
Right now, my "PROOF OF PURCHASE" is at europe, and i'm at america, so i must get this work again by myself, or pay (some expensive value, i think) for htc support.
I found those ROM version:
RUU_Ace_HTC_WWE_1.72.405.3_R2_Radio_12.28e.60.140f_26.04.02.17_M2_SF_release_163262_signed.exe 04-Jan-2011 12:41 285M Windows executable file
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_26.04.02.17_M2_release_161342_signed.exe
but i'm not sure about "WWE". What it means?
Click to expand...
Click to collapse
the different is just the radio version. just try flash one of them and see if that work.
WWE means World Wide English, which is an international release
Any one of those RUUs you linked is ok, as hedayat7 already said.
WWE is World wide English...so both are english Roms...try the RUU flash, it should work like a dream....
jkoljo said:
Download the RUU.exe from Stock roms thread in android development subforum, and run it.
Click to expand...
Click to collapse
Sorry ask for your help again, but at Official thread (thread number 841207) for DHD files, both 1.72.405.3 links are broken.
So i search for another thread, and found another one, but when i run the .exe, it ask for a USB connection to device, so it appears wrong.
Could you gimme a hand to find the correct file?
PS: I can help with a web hosting to all correct files.
You probably found the correct RUU, now proceed to %TEMP% and copy rom.zip to desktop.
You can find RUUs here: http://xdafil.es/index.php?path=DesireHD/RUU/
I am not completely sure if those zip files are actual rom.zips, you can check that. Open up the zip, and if it has a long list of hboot, system, android-info.txt etc, then it is rom.zip and you can just go ahead and rename it to PD98IMG.zip.
jkoljo said:
You probably found the correct RUU, now proceed to %TEMP% and copy rom.zip to desktop.
You can find RUUs here: ...
I am not completely sure if those zip files are actual rom.zips, you can check that. Open up the zip, and if it has a long list of hboot, system, android-info.txt etc, then it is rom.zip and you can just go ahead and rename it to PD98IMG.zip.
Click to expand...
Click to collapse
But i did that.
The "1.72.405.3" files at this URL are broken (Or need password to access it, because "You don't have permission to access" message pop up).
When i run the RRU i got two screens, first i must accept a advice, the second one ask if I have a USB connection to my device. Even when i proceed to next step, i got no .zip file on my %TEMP%.
Im lost because of that lol
UPDATE: OK I FOUND IT! haha ty
Thanks a lot my friends,
but it doesn't work.
I perform the process for 2 different roms, and it doesn't work.
Still can't boot.
I'll sent for warranty and wait a loooong time..
But thanks a lot for help me with this!!
Ok, then there is something wrong in the device itself. You have to send it to a service center.
Sent from my Desire HD using Tapatalk
Hi again,
i keep a little hope that i can restore my phone, so i found a possible solution:
OTA update.
At "showthread.php?t=667728&page=2", i found a guy with the same problem i think, here is the quote:
Kinma said:
I had the same problem last week.
I suspected it had to do with the EXT3 partition.
Solved it by first flashing the OTA 2.2 ROM (for rooted users) as this does not use the EXT3. Then used Rom manager to recreate the EXT3.
Now all ROMs that use the EXT3 run fine!
Click to expand...
Click to collapse
(thanks Kinma for the feedback)
So, i start a search for OTA update file here, and found at "showthread.php?t=885996".
But when i choose "Apply sdcard:update.zip", i got INVALID OPERATION.
Someone have a tip for me about this?
Thanks (its very sad, but i must keep hope).
dogasantos said:
(thanks Kinma for the feedback)
Click to expand...
Click to collapse
You are welcome.
What happened was that after a reboot of the phone the phone started rebooting in the boot sequence, i.e. a boot loop.
I tried a lot of things and nothing worked.
Finally I suspected that the problem might be with the SD card. I had a backup, so I had no problem doing a factory reset.
Then I booted the phone without the SD card.
The phone booted fine.
That way I was certain that the problem was with the SD card.
I had 2 partitions on the SD card, an EXT3 part and the rest was a normal Fat part.
I could still read the card, so I made a backup of all the data on the card.
Then I reformatted the card using windows.
The phone booted fine with an empty, reformatted, SD card.
Since I use Apps 2 SD, I had to recreate the EXT3 partition.
If your rom does not use this, you do not have to do this.
After recreating the EXT partition, put back all files that I want on my SD card.
My advice would be to do a factory reset and after that boot the phone without the SD card.
If the phone boots, you know the problem is with the card.
Hope that helps; good luck!
dogasantos said:
Sorry ask for your help again, but at Official thread (thread number 841207) for DHD files, both 1.72.405.3 links are broken.
So i search for another thread, and found another one, but when i run the .exe, it ask for a USB connection to device, so it appears wrong.
Could you gimme a hand to find the correct file?
PS: I can help with a web hosting to all correct files.
Click to expand...
Click to collapse
Here, use this link:
http://forum.xda-developers.com/archive/index.php/t-899564.html
From "football" post copy and paste his link, the download would start immediately..
Hi folks,
boot without the SD card, doesn't work =(
I'm really without luck with this.
I do:
- Factory reset
- Clear cache and userdata
- Boot without SD or/and SIM cards
- Reflash RUU WWE 1.72.405.3 Radio 26.04.02.17_M2
- Reflash RRU WWE 1.72.405.3 Radio 26.04.02.17_M2 SF
- erase all SD
One show was use OTA update.zip, but at this step i got "invalid operation"
SO, nothing works!
Well, it appears a lost battle =\
thanks folks for all help.
Yeah, there must be something wrong in your device itself, for example a motherboard fault. Send it back to HTC.
yukinok25 said:
Here, use this link:
http://forum.xda-developers.com/archive/index.php/t-899564.html
From "football" post copy and paste his link, the download would start immediately..
Click to expand...
Click to collapse
Hi,
I found the information extremely useful. Big Thanks
GRuti
After installing dexter's 1.3 mod, i still do not see market....I know mod works because of sound volume change...I checked sd card on tablet and it shows update.zip.zip but on laptop card reads update.zip only...is that where the problem lies? I'm not sure where i should be finding the market app...or , is there something else I should do?
Here.
http://forum.xda-developers.com/showthread.php?p=11745552#post11745552
Edit: BTW, there was no volume change, the mod didn't install.
i dont know wy people dont explain this better. instead of just reposting links to instruction that need clarification.
when you download he dexter mod file its allready a zip file. so all you have to do is rename it to
update
t_sandat8 said:
i dont know wy people dont explain this better. instead of just reposting links to instruction that need clarification.
when you download he dexter mod file its allready a zip file. so all you have to do is rename it to
update
Click to expand...
Click to collapse
Not quite. If you do that on any of my workstations or laptops you will end up with a file
named just 'Update.'
It all depends on the settings you have in Windows File Manager.
If a user is going to be dealing with file extensions then the feature that is set to
'Hide File Extensions' needs to be disabled, Hence the link to the post on how to do that.
The instructions in the posting do not need clarification, File Manager needs tweaking
and that is how it needs to be configured to eliminate confusion.
It's rough that MS still realies on file extensions. And then when users are trying to do
something that requires that detail it gets confusing.
_mr
t_sandat8 said:
i dont know wy people dont explain this better. instead of just reposting links to instruction that need clarification.
when you download he dexter mod file its allready a zip file. so all you have to do is rename it to
update
Click to expand...
Click to collapse
Are you serious? Get off the cheap drugs, the expensive ones won't $#% you up so bad.
I think you are actually the one that started me on that rant that I linked (that went into enough detail that it described, and gave instructions on how to fix people's common issues from TWO OPERATING SYSTEMS!) You keep telling people "just name it update" you are wrong, dead wrong. the file NEEDS to be update.zip and your generalization will only cause issues for people that wouldn't have had them otherwise... So it looks like you are the one that posts instructions that need clarification.
I posted the link because it had already been answered, I am not going to type until I am blue in the face just because some people don't have the gift of search.
middle_road said:
Not quite. If you do that on any of my workstations or laptops you will end up with a file
named just 'Update.'
It all depends on the settings you have in Windows File Manager.
If a user is going to be dealing with file extensions then the feature that is set to
'Hide File Extensions' needs to be disabled, Hence the link to the post on how to do that.
The instructions in the posting do not need clarification, File Manager needs tweaking
and that is how it needs to be configured to eliminate confusion.
It's rough that MS still realies on file extensions. And then when users are trying to do
something that requires that detail it gets confusing.
_mr
Click to expand...
Click to collapse
You just became my favorite xda member for today.
It's unfortunate that you had to type all that out just because this kid won't actually read the content of a link that, as it ends up, was in response to him anyway lol
I think we need concentrate on more important things instead dispute of update.zip
Anybody can call techsupport and ask about Gingerbread? Nvidia posted system image (for Tegra Development Boarder) with Android 2.3 already.
I can not cause i'm living in Russia) But i've sent them 100 kilos of emails)) No one was responded.
if your getting update.zip.zip rename to update
Help Please
I just received an A7 that I purchased for my wife. Want to add the marketplace and the ability to tether with an EVO. Have been reading and am worried that I may do more damage than good. If anyone has the time to help a beginner, I would be sincerely appreciative. Thanks and have a great day!
Frank
FrankandRachel said:
I just received an A7 that I purchased for my wife. Want to add the marketplace and the ability to tether with an EVO. Have been reading and am worried that I may do more damage than good. If anyone has the time to help a beginner, I would be sincerely appreciative. Thanks and have a great day!
Frank
Click to expand...
Click to collapse
1) Install elocitymod 1.3 on your A7 (install instructions are at the beginning of the thread for it in the A7 Development section)
2) Wait on the bluetooth fix to see if you have any problems (I am running without the BT fix and running fine, others have issues and the BT fix helps them out)
3) If you don't want to pay Sprint $30 extra a month you are going to have to root the EVO
3a) Use unrevoked3 (quick google search)
I would recommend doing it from a Mac just because it is easier, PC you have to install drivers.
3b) Once the EVO is rooted, install "Wireless Tether" from the Market (on the EVO)
4) Profit.
This is pretty much my setup and I love it. I have done other modifications to my A7 and my EVO, but nothing that would alter this.
Help Please
Thank you so much for your reply, sincerely appreciate it. Be patient with me, new to this stuff. I downloaded the mod and tried to install, with no luck. It downloaded five different files, which one should be renamed to update or update.zip? Downloaded pda.net on the evo and on the laptop and it worked fine. Just wasn't sure what to download for the A7 to make it work. Thanks again and have a great day.
Frank
FrankandRachel said:
Thank you so much for your reply, sincerely appreciate it. Be patient with me, new to this stuff. I downloaded the mod and tried to install, with no luck. It downloaded five different files, which one should be renamed to update or update.zip? Downloaded pda.net on the evo and on the laptop and it worked fine. Just wasn't sure what to download for the A7 to make it work. Thanks again and have a great day.
Frank
Click to expand...
Click to collapse
the file ElocityModv13.zip should be update.zip
Make sure Hide extensions for known file types is OFF in Windows.
I'm starting to suspect that the micro card reader in the A7 might just be finicky.
What size and type of Micro SDCard are you using?
Do me a favor and do a 'Properties' on the Dexter Mod file and post back what size is reported.
Try formatting the card this way: -=- LINK -=-
_mr
mod on SD Card
I think the ELocity only supports the micro SHDC cards not vanilla micro SD cards. Someone else in another thread had a problem with update.zip and it turned out it was on a vanilla micro SD card and when they used a micro SDHC card it worked.
Brand new phone...can't believe i did something wrong only a few hours into it!?
To cut to it, i am not able to run anything on my PC to my Atrix bc the phone is not visible to it via usb sync. It DOES still see it if i needed to transfer files etc, just not so i can flash anything to it off the PC.
And not sure if it has anything to do with it, but it seems like i ran into my problem when i inserted and formatted my SD card. Here's what i did (and i hadn't gotten very far):
I rooted with SuperOneClick, then I installed DG's Adeo ROM and the update.
I was trying to install Gingerbread and was just putting busybox installer on my phone when i went to put my SD card in there from my old phone. i formatted the card and it seemed after i did that i lost connectivity via the USB. It could still access the phone, but everytime i run ATRIX4G_MobileTV_GBTheme.bat it hangs at "daemon started succesfully" . It also hangs if i try to run SuperOneClick again on "waiting for device."
I wasn't sure what to do to get it running right again so i did a full wipe from the settings. Still can't connect
Any help be greatly appreciated. i've literally had this phone 4 hours so sorry if i'm missing something dumb
Try running aRoot (search this forum) and then trying all that.
thanks for that suggestion, gonna try that....just as soon as the damn search function comes back!!
oh the waiting...i am not going to be able to sleep tonight till i get somethin happenin
No need to search, it's only hanging about 3-5 posts down in this section. It's also here:
http://forum.xda-developers.com/showthread.php?t=981866
Ran aRoot - seems to run through the steps without a failure, but it went VERY fast, like 3 seconds...and it hangs when i try to "unroot"
so, all in all it seems like its still not recognizing the phone as before when connected through USB
Dillsnik said:
Ran aRoot - seems to run through the steps without a failure, but it went VERY fast, like 3 seconds...and it hangs when i try to "unroot"
so, all in all it seems like its still not recognizing the phone as before when connected through USB
Click to expand...
Click to collapse
Do you have Root Explorer? If so, look in /sbin and see if you have 'adbd' showing
OR
Have you tried installing the ADB interface from the Android SDK? See if your device can be seen? If not see THIS ARTICLE (external link to addictivetips) on setting up ADB.
No, I don't have Root Explorer
I installed SDK and ADB and it does show up, but only when the USB setting is set to "Motorola phone portal." None of the other options it shows up in device mgr.
I am kinda stabbing in the dark at this point...thinking maybe it's a driver issue?
maybe if i uninstall all the drivers and start from scratch i might have some luck? i actually did unistall all the drivers thru device mgr, but they just came right back next time i connected...so maybe i need to delete them entirely?
any suggestions to trouble shoot this greatly appreciated...i know it's probably small potatos but i'm really jammed up here...
Moved as not android development
Have you tried installing the latest drivers again directly from the Motorola Mobility site? You can install Media Link or just the drivers with MotoHelper. For some reason my phone installed all of this, but there were updates available immediately.
The ADB interface should function when USB is set to None.
Sent from my Rooted Atrix using Tapatalk Pro
Yeah i actually did a system restore and reinstalled all the drivers etc.
I can see the phone now in the device mgr under ADB interface when connection is set to "None" for USB
But still hangs when trying to flash basically anything
Do you have or can you pick up a Terminal Emulator in the Market and list the files in /sbin? See if you have adbd...
From $
su
cd /sbin
ls (Lower case L, not 1)
Look through list of files for adbd.
Sent from my Rooted Atrix using Tapatalk Pro
OK, No it's not in there
See this post here: http://forum.xda-developers.com/showpost.php?p=11738847&postcount=1 and the cooresponding thread for replacing adbd. There's another post in the thread about changing the permissions so that it doesn't get lost again with a reboot. You might have to purchase Root Explorer since you cannot push anything via ADB over USB.
Sent from my Rooted Atrix using Tapatalk Pro
This seems to be the type of problem i am having, very much thanks for directing me to that other thread.
At this point i have copied ADB to the sbin folder but nothing flashing yet...need to read through that thread more and play with it.
What a PITA so far but thanks so much for the help!
No problem. I hope it works out. If you don't mind, post up and let me know if you get it going and what it took so we can try to help others.
Sent from my Rooted Atrix using Tapatalk Pro
Everyone mod is working i geuss except for mines i don't know what am doing wrong.
i tried to mod mine with the dexter mod 1.41 and mines wont work,
1st- i download the file didn't unzip it then i sent it to the SD card and rename it "update.zip".
2nd- i did the factory wipe/reset then i select to wipe all data
3rd- i select update.zip but i notice an message saying( E. can't read from SD card, or something like that). i dont know if that is apart of the mod or what.
4th- when it is finish then i select reboot option and when it is done rebooting i get nothing new. can you help me out are do you know something that i might be doing wrong. i also did do the 1.42 patch aswell didn't work. are is there any other newer way to do it are what. Even if you can write step by step on how to do it properly.
PLEASE HELP ME OUT.
Did your a7 have a sdcard problem before the attempt ?
And even tho it sed it can't read sdcard, did it proceed to install anyway ?
yes it did go ahead with the installation, but it is during the installation process where i saw something about can't read error, i jus got it yesterday then i did the new update from elocity website. then i tried al,ost all of dexter's mod
these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation
Does your a7 read, mount and unmount the sdcard stock?
What is the path to the update.zip?
Sorry for all the questions, I'm just trying to get on the same page
Sent from my Mynized EVo 4G
I'm having just about the same problem. Will be interested to hear any helpful suggestions. At this point, the only thing that is working is to do the factory reset and use the basic version again. I keep getting a message that "update.zip" (although I named it "Update.zip") is a bad file. I also did not get "apply sdcard:update.zip" as a menu option, only "apply:update.zip", which when clicked did read the sd card, then gave the bad file message.
update
Lemme clarify first then update. I bought the A7 in February and loaded the most current Dexter mod at that time. It's been running beautifully until this week. Over a period of days, the A7 started acting up until it was no longer usable at all. First, the BlueTooth cut out, then the WiFi, then it just got stuck and was repeatedly lighting up the Elocity logo, but never fully booting up.
Elocity support said to do the Factory reset, which I did and it was back to baseline again. Trying to install the latest version of Dexter is where my problem started. (end of history)
So, now the update for this evening: I tried every version of Dexter's mods and got the "bad" file message each time, even after downloading them again to be sure I wasn't using a corrupted copy. However, my A7 will wipe, then update with Elocity Firmware 2.0134 and read it just fine on the exact same SD card when renamed "Update.zip".
So, now I have a very frustrated boy with autism who can't do his Google Voice search anymore and the Android Marketplace doesn't let me download the apps I already bought for him. We're back to where we were when it arrived out of the box in February, but unable to restore what we had.
I have to think there's a conflict between Dexter's Mods and the new firmware, even after one wipes everything. I even tweeted Dexter (and I don't *do* Twitter!) to see if he could respond for help and am waiting for a response.
Can someone please help? Thanks!!
Sounds like your having issues with the files you download, I have gotten in the habit of not renaming the update file to just that until its on the usb card. Seen to many messages like yours if I saved one update over a prior with the same name. Try download 1.41 and 1.42 leave their names the way they are and save them to folder on your computer. Copy them bother to sd-card leaving names the same still. once both are there rename 1.41 to Update. Remove card from pc put in tablet. Use the recovery system method (press then hold power button method) do wipe, clear cache, the use update option. If this is successful which it should be delete the 1.41 file on card that you renamed to Update, this can be done on tablet or computer. Once that file is gone rename the 1.42 to Update and once again flash from recovery system.
Hope that solves your issue
Make it a habit to not save an update over top of another, though it seems like it would keep you from having to rename but for me it always seemed to corrupt the file.
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
cwolfpack3 said:
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
Click to expand...
Click to collapse
Do you end up with a folder or a zip file? Safari has a bad habit of extracting zips when it downloads them. Search my posts, there is a long ranting one that covers issues with both PC and Mac.
they're zipped ... I use Firefox 4.0, when the option comes up at download, I always click "save", not "open". Thanks, though.
well, problem solved. I ran Bestial's gapps patch over top of the new eLocity firmware and i have full functionality again. very happy mom here! now to reload all those apps for my boy! =D
Wow, I'm glad you found a solution...I have been following the thread and was getting worried.
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
bft305 said:
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
Click to expand...
Click to collapse
No. Your problem was that you were using a windows machine and your file extensions were hidden (I am psychic, but don't worry, I won't tell anyone your pin number). She is using a Mac, no hidden file extensions.
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
sbradby said:
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
Click to expand...
Click to collapse
bestialbub's patch for google apps (to use the market) can be found at http://forum.xda-developers.com/showthread.php?t=1019846 with the instructions
It's still working very well for us ... several weeks later.
Good luck!
I rooted my Nook in 2014. I hadn't used it since 17 or 18 and now nothing communicates. I can't get the kindle app to sync or anything. Is it done?
NookRoot93 said:
I rooted my Nook in 2014. I hadn't used it since 17 or 18 and now nothing communicates. I can't get the kindle app to sync or anything. Is it done?
Click to expand...
Click to collapse
Two separate issues:
1. For the Kindle app, see this post: https://forum.xda-developers.com/nook-touch/general/elses-nook-simple-touch-kindle-app-stop-t3205615
Post #24 in that thread gives a step-by-step process for copying the updated cacerts.bks file (found at the end of post #10) to your NST.
2. You don't say what browser you are trying to use. Updating the cacerts.bks file may help, but you need a browser that can handle TLS 1.2 security protocols. Opera Mobile 12.1 is an example.
Since I missed the 2018 update, it can't communicate with Nook servers. I just reset the device and I now it's just done. I noticed several other people had this happen recently online with non-rooted Nooks. I have another rooted Nook I can try. I didn't try any browsers, just the kindle and app stores. I did notice my gmail did work.
NookRoot93 said:
Since I missed the 2018 update, it can't communicate with Nook servers. I just reset the device and I now it's just done. I noticed several other people had this happen recently online with non-rooted Nooks. I have another rooted Nook I can try. I didn't try any browsers, just the kindle and app stores. I did notice my gmail did work.
Click to expand...
Click to collapse
When I meant done, I meant I can register it now because while connected to WiFi it says it's not, and tho' I'm layman, I'd take it as not communicating with servers due to software version.
NookRoot93 said:
When I meant done, I meant I can register it now because while connected to WiFi it says it's not, and tho' I'm layman, I'd take it as not communicating with servers due to software version.
Click to expand...
Click to collapse
You are correct, only 1.2.2 firmware will permit you to register now. If that's what you want to do, download the update zip from the B&N website. With your NST at the "welcome" screen, connect the device via USB to your PC and move the zip onto it. Disconnect from USB and let the NST sleep on its own. It will update. Then you can proceed with registration, rooting, etc.
nmyshkin said:
You are correct, only 1.2.2 firmware will permit you to register now. If that's what you want to do, download the update zip from the B&N website. With your NST at the "welcome" screen, connect the device via USB to your PC and move th.e zip onto it. Disconnect from USB and let the NST sleep on its own. It will update. Then you can proceed with registration, rooting, etc.
Click to expand...
Click to collapse
Hi. I can't seem to find the update zip file as downloadable from B&N site. If you could help provide a link, thanks in advance. The only update I found was for Nook HD or is that one ok?
NookRoot93 said:
Hi. I can't seem to find the update zip file as downloadable from B&N site. If you could help provide a link, thanks in advance. The only update I found was for Nook HD or is that one ok?
Click to expand...
Click to collapse
Go here: https://help.barnesandnoble.com/app/answers/detail/a_id/4212 and scroll down to Nook Simple Touch. Follow the "download" link.
nmyshkin said:
You are correct, only 1.2.2 firmware will permit you to register now. If that's what you want to do, download the update zip from the B&N website. With your NST at the "welcome" screen, connect the device via USB to your PC and move the zip onto it. Disconnect from USB and let the NST sleep on its own. It will update. Then you can proceed with registration, rooting, etc.
Click to expand...
Click to collapse
nmyshkin said:
Go here: https://help.barnesandnoble.com/app/answers/detail/a_id/4212 and scroll down to Nook Simple Touch. Follow the "download" link.
Click to expand...
Click to collapse
Hi. I found the update. Thank you! New problem. I can't get my new laptop to recognize the Nook via USB. It only charges. Do you have a good, instructional link on how to get a driver to recognize the device?
NookRoot93 said:
Hi. I found the update. Thank you! New problem. I can't get my new laptop to recognize the Nook via USB. It only charges. Do you have a good, instructional link on how to get a driver to recognize the device?
Click to expand...
Click to collapse
It's always something.
According to B&N (https://help.barnesandnoble.com/app.../~/nook-simple-touch---transfer-files-from-pc) you don't need any special drivers for a PC to recognize the NST, but I do recall back in the Win XP days that we had to massage a .inf file to get the PC to see the NST. I've searched for that info (which is what you should do) on the forum and generally via Google bu failed to find it. The information is there somewhere.
If you've got a Mac or are running Linux, then I truly have no idea.
WIN 10. I've tried adding drivers, legacy hardware....maybe I can try on a Win 7 tonight.
I got the update installed. Thanks again!
NookRoot93 said:
WIN 10. I've tried adding drivers, legacy hardware....maybe I can try on a Win 7 tonight.
Click to expand...
Click to collapse
Hello again. I've got the Nook updated and rooted via NookManager. My previous way was the rooted forever root(?). So...can I read kindle titles on the device? That's really the main reason I rooted it in the first place. Are there apps that still work for it? It looks like not much does. Is there a link for legacy apk to download? Thank you so much for the help you've provided me!
NookRoot93 said:
Hello again. I've got the Nook updated and rooted via NookManager. My previous way was the rooted forever root(?). So...can I read kindle titles on the device? That's really the main reason I rooted it in the first place. Are there apps that still work for it? It looks like not much does. Is there a link for legacy apk to download? Thank you so much for the help you've provided me!
Click to expand...
Click to collapse
Yes, you can install the Kindle app and read mobi format ebooks, either side-loaded or from your local library Overdrive system, but you'll have to update the cacerts.bks file first because the security certificates in the stock file have died. There is an option described in the second post in the updated NookManager thread, but it's probably easier if you didn't do it during rooting to do it manually.
Here's what I wrote:
"Some certificates have expired (like the one for Amazon.com). Some editing and updating of our file was done by XDA member @tshoulihane here: https://forum.xda-developers.com/showpost.php?p=65344931&postcount=10 (use the more complete file).
Recently I came across a CM 7 ROM (Honeycomb) and harvested the cacerts file from there. You can find it here: https://forum.xda-developers.com/nook-touch/general/nst-g-revisiting-cacerts-bks-t3872617. This also works with Amazon.com and contains many other certificates than our original file--but some are expired."
So grab one of the files and then follow the directions in post #24 of this thread: https://forum.xda-developers.com/nook-touch/general/nst-g-revisiting-cacerts-bks-t3872617
As for other apps, there are many that still work quite well. Follow the link in my signature for a zip to download of all the apps I currently use. If you don't see something there that you think you want, just ask. Someone may have a working copy.
Sorry for the late reply. I didn't see your last post.
NookRoot93 said:
I got the update installed. Thanks again!
Click to expand...
Click to collapse
Can you tell me how you did it? I don't seem to find a way to get the file to my nook.
velayo said:
Can you tell me how you did it? I don't seem to find a way to get the file to my nook.
Click to expand...
Click to collapse
Are you talking about the B&N 1.2.2 update? If so, download the zip from the B&N website. Then connect your device to your PC via USB and copy the zip file to the root of the NOOK drive (not the sdcard). Then wait. The device needs to sleep before it notices the update and installs it.
You need to revert to stock to do this and you can do it on the "Welcome" screen without going any further.
nmyshkin said:
Are you talking about the B&N 1.2.2 update? If so, download the zip from the B&N website. Then connect your device to your PC via USB and copy the zip file to the root of the NOOK drive (not the sdcard). Then wait. The device needs to sleep before it notices the update and installs it.
You need to revert to stock to do this and you can do it on the "Welcome" screen without going any further.
Click to expand...
Click to collapse
Thank you!! My NSTG wasn't mounting on Windows. Had to reset and then it mounted. @nmyshkin Thanks for keeping our devices alive. I appreciate everything you do!!