Related
here is what happened...
got my xda 2 a few weeks which was supposedly "unlocked" and installed a sim card from my local provider and i had mobile inernet for about a week and then a few days later it just stopped. i completely lost the signal and up in the connectivity section it just says "no service". i have tried a hard reset and that didnt help. i still dont know when the heck happned or what is wrong but now things have gotten even weirder. when i toggle between flight mode on and off it prompts me saying "sim card blocked. please enter PUK" does this mean my xda 2 is locked? is it possible for a device to be unlocked and then locked all over again for some reason?
i tried using the unlocking tool from this site but the one that runs off you desktop pc tells me the phone is already unlocked and the one you run off your pocket pc tells me everything is fixed but i still get prompted for the PUK?
your problem is that your SIM card is locked, not your device. This mostly happens when you try to enter the PIN code 3 times without success. The only way out is to enter the PUK code, so you can change the SIM password.
In Europe, this code is mostly given to you at signup time. Here, in the US, they make you call the telcom operator and dig it out of them, if you get a competent person on the other end of the phone line.
So, my bet is that you entered the wrong pin code for your phone -- and maybe you did this without even knowing you did it.
sigh...to tell you the truth i was hoping it was a locked xda 2...maybe that would of explained why im not getting a signal ...
You are not getting a signal because the puk is now required to access the sim/service provider. You should be able to get the puk by calling your provider or online through your providers internet site, you should then have a working phone again. To prove this to yourself just place another sim in the phone.
Never a nice thought some one is flicking thru your contacts and private photos.
No they can onlu IMEI block it to prevent it making calls, consider using the built in password options.
they can imei bar it but the orbit works without a sim in terms of browsing stuff so I guess so, unless you set up a handset pin as well as a sim pin
What happens if they put a different sim card in there before i tell O2?
Can you still search around on the device with Active Sync if there is a lock.
it will still imei bar the handset, I would guess so re the active sync q, bes thing is to put a handset pin in
i take there is a hack to unlock the IMEI after they have blocked it.
No there is no hack unless you phyically flash the phone to change the IMEI as i amware this is not possible.. well probably but more likly to completely f*** the phone up.
Now there is a small thing there is no INTERNATIONAL blacklist for IMEI i think the EU or atleast many EU countries are linked so you cant just go to France from UK and use a bared IMEI but i know it u go to like Thailand you can (gave my girlfriend a phone i had when she was on holiday and it worked that was bared here because i reported it stolen and then it turned up).
Anyway no-one on here will help you change an IMEI its to risky for all they know you may have stolen it. (this is not an acusation in ANYWAY) However there are those that will try this sort of technique.
Hi!
I have a network unlocked HTC Dream (english T-mobile-version) that I bought used and unlocked. The previous user hade Tele2 as his operator but I used Telia. I´m now in dispute with him because the phone never worked with any calling och messaging but data works fine after manual APN-settings. I have now recieved the unlock code he got to unlock the phone, but with it being unlocked already it doesn´t really help me right now.
The plan is to somehow revert back to a locked phone and unlock it with my SIM sitting inside, and by that maybe fixing the problem.
So how do I make the phone go back to being locked to T-mobile?
Best regards,
Christoffer
It sounds like it might be IMEI locked on the network. T-mobile in the UK will allow blacklisted phones to connect even though they cannot work and there seems to be a loophole where data gets through. Maybe the case is similar, ring your operator from another phone and ask them.
Hedgren said:
Hi!
I have a network unlocked HTC Dream (english T-mobile-version) that I bought used and unlocked. The previous user hade Tele2 as his operator but I used Telia. I´m now in dispute with him because the phone never worked with any calling och messaging but data works fine after manual APN-settings. I have now recieved the unlock code he got to unlock the phone, but with it being unlocked already it doesn´t really help me right now.
The plan is to somehow revert back to a locked phone and unlock it with my SIM sitting inside, and by that maybe fixing the problem.
So how do I make the phone go back to being locked to T-mobile?
Best regards,
Christoffer
Click to expand...
Click to collapse
Well I am not sure why you can access data but can't make calls. It would seem to be some type of carrier problem or something I don't know about. I do know that you definitely cannot re-lock it, once it is unlocked it stays that way unless tmobile can do something with it. Something is either wrong with the phones hardware or your carrier, if it is a software problem maybe try flashing a new rom and re-enter your APN stuff.
Try making a emergency call like 911 or whatever, if that doesn't work something is screwed.
I tried it out this weekend with a friends SIM who is on Tele2, and it worked there with no problem! It is so weird that it acts like it was network locked, even though it shouldn´t be.
I´ve seen that a few have posted about the same problem, mainly with the Dream but also with the Magic. It comes up as "Telia" but follows with a "(No Service)". About 24 hours after I recieved it connected to the network and worked fine for about 10 hours but then it stopped working just as I got a MMS I was about to download. If I try to manually connect to the network from the list of operators, it says that my SIM "isn´t allowed to connect to this network".
I´ve downgraded and upgraded Radio to try to solve this, nothing worked.
I dont know alot about foreign networks but if you can get data then you should get all services. That message you got "SIM isn't allowed to connect to this network" is what you should get when your not unlocked. Or if the SIM is trying to use another carriers cell tower, your sure you got the APN settings correct? It sounds like you have some sort of hardware problem if the switching of Radios didn't help. Can you try the same SIM in another phone and see what happens?
I use the same SIM daily in my old phone the Dream was supposed to replace, works like a charm with everything.
It can´t be a hardware problem when the phone works flawless with Tele2, or can it?
Well it is just weird the data works and not calls. I am just guessing what it could be. Maybe something with the carrier? It's a odd problem.
Did you ring your operator? Put the SIM card in the phone, turn it on, then ring Telia from another phone. They should be able to tell you something. If it is blacklisted, they do not always share this with other networks.
AdamPI said:
Did you ring your operator? Put the SIM card in the phone, turn it on, then ring Telia from another phone. They should be able to tell you something. If it is blacklisted, they do not always share this with other networks.
Click to expand...
Click to collapse
That might be a thing to try. I have been in contact with Telia and gave them my IMEI-number but even during the short period the phone worked (by chance) they say that IMEI has never been logged in their system.
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
I had similar issue my w580i. I had it after putting the unlocking code it stop recoganising SIM, havn't solution till now
Did you try using a different Rogers sim?
I don't have a rogers SIM, only AT&T. I bought the phone locked and just figured I would be able to get an unlock code like all the other phones I've had before, but no dice.
Check your pm
Sent from my X10a using XDA App
I just tried to put in my deactivated Rogers SIM card from long time ago, and I am also getting "No SIM Card" ... Not sure if your problem has anything to do with Rogers Wireless used to be "Rogers AT&T" before
If you have any friends has SIM card from different carriers, try to put those in and see if you experience "No SIM Card" issue.
Regards
Mabye it does.. I'll try and find someone with a Tmobile sim I guess.. thanks for the advice though..
Please keep me updated on this, I'm trying to unlock my X10, I got the code from cellunlock.net through the manufacturer and keeps telling me after I enter the code that it was unsuccessful.
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
junkk29 said:
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
Click to expand...
Click to collapse
Got an unlock code, www.cellunlock.net
Make sure to pick the Sony Ericsson Manufacturer code it's 34.99 but well worth it. It works now.
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Jikenda said:
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Click to expand...
Click to collapse
How old are the sim cards? If they are old, get new ones. Also, try re-installing the firmware through seus and then putting in your sim card. I never had that issue, I just had a hard time finding the code.
I had a real old one from cingular, but then I just went to AT&T and got a brand new one, but same issue. I'll try updating and see if that helps, but will the phone update without a valid sim inserted?
Jikenda said:
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
Click to expand...
Click to collapse
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
RumpleStealthSkin said:
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
Click to expand...
Click to collapse
I'm sorry, what is the PUK number for and also, why does AT&T need my IMEI number? I mean, the phone is still locked to rogers right now regardless, right?
Lots of noob questions, sorry.
Also, i already spoke to AT&T, Rogers and Sony Ericsson about the issue, but none of them are any help of course. The PUK did nothing for me either. I feel like I am running out of options here...
welcome to the club
http://forum.xda-developers.com/showthread.php?t=717414&highlight=phone+stuck
so far no solution
So, I tried repairing through PC Companion and then I also ran the update and go the newest firmware installed now, but still same problem. Phone does not recognize the AT&T when inserted and therefore, no option to enter the network unlock code. Any others have any luck/make any progress??
wow... i guess i'm in the club as well. I just got back from the Rogers store and they wouldn't let me replace the phone anymore. I've bought the manufacturer's code which is suppose to work 100% but it didn't...so desperate
Sorry to hear that...
You said the code you got didn't work? In what way? did you try to get a refund by providing video evidence?
On a side note, does anyone know how to access a keypad on the x10 that enables you to imput the left arrow, *, * left arrow method to input the code? I realize I need to have a valid rogers sim inserted in order for this to work, but I do not see how to input the arrow keys. Any suggestions? As I've said, I'm new to android and to a device with no physical keyboard, so maybe this is very simple...
thanks and good luck to others in the same spot as me right now..
Hey guys, strange problem:
Got a Telus LG Optimus 7. Want to unlock it to Rogers. Got the unlock code, however when I use my Rogers SIM the Optimus asks for a 'PUK' number.
Long story short, I called Rogers, they gave me the PUK for my SIM. When I enter it I get 'SIM Error'. So I went to a Rogers store and got a new SIM card with a new PUK--same error. Tried someone else's Roger's SIM--still asks for PUK.
I called around, no one has any idea what's going on. Google can barely help. Telus tells me I have to pay $50 to get it off their network, but I can't trust the rep knew what the problem was and they won't just give me an unlock code I already have. A 'cell phone repair shop' tells me LG phones are impossible to unlock anyway (? really?). So my question is:
How do I unlock this phone? What kind of security is this (could the PUK refer to someother other than a SIM's PUK)? Anyone have experience unlocking a Telus Optimus? Can I flash this thing and see if it'll bypass the PUK part?
Any help would be deeply appreciated. Other wise I have to try and resell this phone.
So, I re-flashed the phone anyway, just to see if it works.
Now it's a little different. Now it asks for a PUK and once I enter that it tells me to create a PIN. When I do it says SIM ERROR! So while I can get a little farther it still errors out!
I've tried both the Telus flash and the Mexico flash.
So if it's not the firmware, what could be causing this?!
PIN & PUK security depends on SIM card functionality, in this case phone software is transparent and does not verify PIN. IMHO it looks like incompatibility between SIM card and WP7 phone or strange configured SIM card. Try on another non-WP7 phone, maybe if you set or disable PIN code card will function on WP7 phone.
Thanks for the tip elektryk. I think you're on to something.
I have tried the SIM in a non-WP7 phone. It works fine. I put it in both an iPhone and BB. Using the iPhone I created a PIN then tried the Optimus. It now asks for a SIM pin--which I input, then goes back to the PUK screen which still fails.
It seems to be a very strange incompatibility with the SIM, even though I've read reports of Telus Optimus being unlocked for Rogers SIMs.
Bad luck I suppose?
I have exactly the same problem. I put a SIM with PIN security enabled, and after I enter the correct PIN requests the PUK!! and if I disable the PIN secure, request inmediatly for the PUK. The Phone say: Your phone is Blocked. Contact the Service provider for an unlock code.--- the only problem is that I don't use the AT&T service, so I can't contact them!! HELP!!!!!!!!!!
Fabian, I could not find a way around the problem so I sold the phone. Luckily there was another e900h which was unlocked for sale. The guy followed the same steps I did but it never asked for a PUK. Weird how some phones do and others don't (especially considering both phones were from the same provider).
EDIT: Hey, try this, see if it works: Try without sim card for enter the unlock code. and type 2945#*900# for enter the unlock menu
BakedGoodsX said:
Fabian, I could not find a way around the problem so I sold the phone. Luckily there was another e900h which was unlocked for sale. The guy followed the same steps I did but it never asked for a PUK. Weird how some phones do and others don't (especially considering both phones were from the same provider).
EDIT: Hey, try this, see if it works: Try without sim card for enter the unlock code. and type 2945#*900# for enter the unlock menu
Click to expand...
Click to collapse
Hey, start the phone without sim card, but no unlock code required, no where to type.
I've a E900h where none of the 5 unlock codes provided worked for some reason. Haven't ask for PUK yet but lost as to what to do right now.
Typing 2945#*900# just produces a failed msg - top left hand corner is a file icon with lock on the left.
In our country ones you buy a sim from network provider.
they give us a card with a PUK code for the sim we buy.
Try to contact your service provider.
Unlock codes is For unlocking SIm Only.
you can switch different SIM f u have unlock codes.
it is different with SIm Pin Code.
You can get Ur PUK Code to your service Provider.
what country were u from??
PRESS THANKS IF I HELP!!