here is what happened...
got my xda 2 a few weeks which was supposedly "unlocked" and installed a sim card from my local provider and i had mobile inernet for about a week and then a few days later it just stopped. i completely lost the signal and up in the connectivity section it just says "no service". i have tried a hard reset and that didnt help. i still dont know when the heck happned or what is wrong but now things have gotten even weirder. when i toggle between flight mode on and off it prompts me saying "sim card blocked. please enter PUK" does this mean my xda 2 is locked? is it possible for a device to be unlocked and then locked all over again for some reason?
i tried using the unlocking tool from this site but the one that runs off you desktop pc tells me the phone is already unlocked and the one you run off your pocket pc tells me everything is fixed but i still get prompted for the PUK?
your problem is that your SIM card is locked, not your device. This mostly happens when you try to enter the PIN code 3 times without success. The only way out is to enter the PUK code, so you can change the SIM password.
In Europe, this code is mostly given to you at signup time. Here, in the US, they make you call the telcom operator and dig it out of them, if you get a competent person on the other end of the phone line.
So, my bet is that you entered the wrong pin code for your phone -- and maybe you did this without even knowing you did it.
sigh...to tell you the truth i was hoping it was a locked xda 2...maybe that would of explained why im not getting a signal ...
You are not getting a signal because the puk is now required to access the sim/service provider. You should be able to get the puk by calling your provider or online through your providers internet site, you should then have a working phone again. To prove this to yourself just place another sim in the phone.
Related
I recently flashed NAZtech Desire ROM and now the phone does not connect to a network. I just get the "emergency calls only" message, but that (999) doesn't work either.
The APN settings are in and selected, but when I try to select a network I get a message that says this SIM cannot connect to this network, even trying to select automatically gives the same result.
I've tried multiple ROMs and multiple SIMs and yes, I have tried doing a Nandroid restore yet still can't connect to a network.
I've tried flashing a new Radio image and reflashing cyanogen's ROM but that still doesn't work.
N.B. This did not happen imediately after flash, it happened over night as I slept. I woke up one morning and it did not connect, I tried moving to multiple different basestations in different areas with no result.
Nandroid?
The good news is that your radio isn't fully dead, bricking your phone.
This is probably not very helpful (though I don’t think anyone is going to be able to be really), but this sounds like what happens when you IMEI is blocked or invalid. The networks won’t let it connect.
Its happened to me on a pervious phone. Unlocking it caused the IMEI to be set to all 0s. Had reset it before it would connect.
Would also fit as you say it didn’t happen straight after the flash. Maybe it was unconnected?
Any chance this has happened? Ring your network see if they can tell you if its blocked (maybe a mistake when someone reported a missing phone...?) Sorry as I say probably not much help.
BigDamHero said:
This is probably not very helpful (though I don’t think anyone is going to be able to be really), but this sounds like what happens when you IMEI is blocked or invalid. The networks won’t let it connect.
Its happened to me on a pervious phone. Unlocking it caused the IMEI to be set to all 0s. Had reset it before it would connect.
Would also fit as you say it didn’t happen straight after the flash. Maybe it was unconnected?
Any chance this has happened? Ring your network see if they can tell you if its blocked (maybe a mistake when someone reported a missing phone...?) Sorry as I say probably not much help.
Click to expand...
Click to collapse
What would I see if it was blocked? if I enter *#06# It just shows my IMEI number. My phone isn't tied to a contract and I've tried different SIMs so how do I check/or get it unlocked.
Did you try another active sim card, or your sim in another phone? I had this same problem and it was just a dead sim card, went to Tmo and they gave me a new sim card for free, popped it in and it connected in a couple seconds.
ikon8 said:
Did you try another active sim card, or your sim in another phone? I had this same problem and it was just a dead sim card, went to Tmo and they gave me a new sim card for free, popped it in and it connected in a couple seconds.
Click to expand...
Click to collapse
I'm currently using the Three UK SIM I usually use for my N1 in my old Samsung Omnia, and I've tried another o2 (untied)* contract SIM and another active SIM.
*I know it's unlocked because it was bought for the Xperia X1 and used in two other phones afterwards (within the contract duration which is due to end later this year) - G1 and iPhone 3GS
Antiskunk said:
What would I see if it was blocked? if I enter *#06# It just shows my IMEI number. My phone isn't tied to a contract and I've tried different SIMs so how do I check/or get it unlocked.
Click to expand...
Click to collapse
You would see what you are seeing (you can see the networks but not connect to them). My MUCH older phone that I referred to did much as yours is doing. There was only the option to make emergency calls.
Its possible to report a phone stolen (by its IMEI number) and ALL the networks will block that IMEI number from connecting. Its designed to combat phone theft. Its the same reason that it is illegal to change a phone's IMEI number.
I doubt this is the case (unless you can think of a reason why it might have happened). But maybe ring your network just in case and ask them to check if your IMEI is blocked.
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
I had similar issue my w580i. I had it after putting the unlocking code it stop recoganising SIM, havn't solution till now
Did you try using a different Rogers sim?
I don't have a rogers SIM, only AT&T. I bought the phone locked and just figured I would be able to get an unlock code like all the other phones I've had before, but no dice.
Check your pm
Sent from my X10a using XDA App
I just tried to put in my deactivated Rogers SIM card from long time ago, and I am also getting "No SIM Card" ... Not sure if your problem has anything to do with Rogers Wireless used to be "Rogers AT&T" before
If you have any friends has SIM card from different carriers, try to put those in and see if you experience "No SIM Card" issue.
Regards
Mabye it does.. I'll try and find someone with a Tmobile sim I guess.. thanks for the advice though..
Please keep me updated on this, I'm trying to unlock my X10, I got the code from cellunlock.net through the manufacturer and keeps telling me after I enter the code that it was unsuccessful.
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
junkk29 said:
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
Click to expand...
Click to collapse
Got an unlock code, www.cellunlock.net
Make sure to pick the Sony Ericsson Manufacturer code it's 34.99 but well worth it. It works now.
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Jikenda said:
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Click to expand...
Click to collapse
How old are the sim cards? If they are old, get new ones. Also, try re-installing the firmware through seus and then putting in your sim card. I never had that issue, I just had a hard time finding the code.
I had a real old one from cingular, but then I just went to AT&T and got a brand new one, but same issue. I'll try updating and see if that helps, but will the phone update without a valid sim inserted?
Jikenda said:
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
Click to expand...
Click to collapse
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
RumpleStealthSkin said:
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
Click to expand...
Click to collapse
I'm sorry, what is the PUK number for and also, why does AT&T need my IMEI number? I mean, the phone is still locked to rogers right now regardless, right?
Lots of noob questions, sorry.
Also, i already spoke to AT&T, Rogers and Sony Ericsson about the issue, but none of them are any help of course. The PUK did nothing for me either. I feel like I am running out of options here...
welcome to the club
http://forum.xda-developers.com/showthread.php?t=717414&highlight=phone+stuck
so far no solution
So, I tried repairing through PC Companion and then I also ran the update and go the newest firmware installed now, but still same problem. Phone does not recognize the AT&T when inserted and therefore, no option to enter the network unlock code. Any others have any luck/make any progress??
wow... i guess i'm in the club as well. I just got back from the Rogers store and they wouldn't let me replace the phone anymore. I've bought the manufacturer's code which is suppose to work 100% but it didn't...so desperate
Sorry to hear that...
You said the code you got didn't work? In what way? did you try to get a refund by providing video evidence?
On a side note, does anyone know how to access a keypad on the x10 that enables you to imput the left arrow, *, * left arrow method to input the code? I realize I need to have a valid rogers sim inserted in order for this to work, but I do not see how to input the arrow keys. Any suggestions? As I've said, I'm new to android and to a device with no physical keyboard, so maybe this is very simple...
thanks and good luck to others in the same spot as me right now..
Hey guys, strange problem:
Got a Telus LG Optimus 7. Want to unlock it to Rogers. Got the unlock code, however when I use my Rogers SIM the Optimus asks for a 'PUK' number.
Long story short, I called Rogers, they gave me the PUK for my SIM. When I enter it I get 'SIM Error'. So I went to a Rogers store and got a new SIM card with a new PUK--same error. Tried someone else's Roger's SIM--still asks for PUK.
I called around, no one has any idea what's going on. Google can barely help. Telus tells me I have to pay $50 to get it off their network, but I can't trust the rep knew what the problem was and they won't just give me an unlock code I already have. A 'cell phone repair shop' tells me LG phones are impossible to unlock anyway (? really?). So my question is:
How do I unlock this phone? What kind of security is this (could the PUK refer to someother other than a SIM's PUK)? Anyone have experience unlocking a Telus Optimus? Can I flash this thing and see if it'll bypass the PUK part?
Any help would be deeply appreciated. Other wise I have to try and resell this phone.
So, I re-flashed the phone anyway, just to see if it works.
Now it's a little different. Now it asks for a PUK and once I enter that it tells me to create a PIN. When I do it says SIM ERROR! So while I can get a little farther it still errors out!
I've tried both the Telus flash and the Mexico flash.
So if it's not the firmware, what could be causing this?!
PIN & PUK security depends on SIM card functionality, in this case phone software is transparent and does not verify PIN. IMHO it looks like incompatibility between SIM card and WP7 phone or strange configured SIM card. Try on another non-WP7 phone, maybe if you set or disable PIN code card will function on WP7 phone.
Thanks for the tip elektryk. I think you're on to something.
I have tried the SIM in a non-WP7 phone. It works fine. I put it in both an iPhone and BB. Using the iPhone I created a PIN then tried the Optimus. It now asks for a SIM pin--which I input, then goes back to the PUK screen which still fails.
It seems to be a very strange incompatibility with the SIM, even though I've read reports of Telus Optimus being unlocked for Rogers SIMs.
Bad luck I suppose?
I have exactly the same problem. I put a SIM with PIN security enabled, and after I enter the correct PIN requests the PUK!! and if I disable the PIN secure, request inmediatly for the PUK. The Phone say: Your phone is Blocked. Contact the Service provider for an unlock code.--- the only problem is that I don't use the AT&T service, so I can't contact them!! HELP!!!!!!!!!!
Fabian, I could not find a way around the problem so I sold the phone. Luckily there was another e900h which was unlocked for sale. The guy followed the same steps I did but it never asked for a PUK. Weird how some phones do and others don't (especially considering both phones were from the same provider).
EDIT: Hey, try this, see if it works: Try without sim card for enter the unlock code. and type 2945#*900# for enter the unlock menu
BakedGoodsX said:
Fabian, I could not find a way around the problem so I sold the phone. Luckily there was another e900h which was unlocked for sale. The guy followed the same steps I did but it never asked for a PUK. Weird how some phones do and others don't (especially considering both phones were from the same provider).
EDIT: Hey, try this, see if it works: Try without sim card for enter the unlock code. and type 2945#*900# for enter the unlock menu
Click to expand...
Click to collapse
Hey, start the phone without sim card, but no unlock code required, no where to type.
I've a E900h where none of the 5 unlock codes provided worked for some reason. Haven't ask for PUK yet but lost as to what to do right now.
Typing 2945#*900# just produces a failed msg - top left hand corner is a file icon with lock on the left.
In our country ones you buy a sim from network provider.
they give us a card with a PUK code for the sim we buy.
Try to contact your service provider.
Unlock codes is For unlocking SIm Only.
you can switch different SIM f u have unlock codes.
it is different with SIm Pin Code.
You can get Ur PUK Code to your service Provider.
what country were u from??
PRESS THANKS IF I HELP!!
Hi,
I just purchased an as new unlocked note 4 from someone on gumtree, they have been posting for years so don't think i have a dodgy phone, i sent my brother to pick the phone up from their home while i was working and he said they unlocked the password while he was there.
But i have just tried a couple of sims and i get the message " sim network unlock pin"
I have tried to contact the person but he works away off shore and don't know when he will get back or reply.
Is there a way to get by this and get my sim working?.......i was planning on rooting the phone anyway.
Thanks for any replies!
You will need to get the unlock code because it's locked to a particular network.
You can usually tell which network it's locked to because it has bloatware from that network installed.
Also in the settings on "about phone" tab it should give you some letters at the end of the firmware version which will tell you what network.
Mine was locked to O2 and I used this guy.
Gave me code in a few hours.
jh787 said:
You will need to get the unlock code because it's locked to a particular network.
You can usually tell which network it's locked to because it has bloatware from that network installed.
Also in the settings on "about phone" tab it should give you some letters at the end of the firmware version which will tell you what network.
Mine was locked to O2 and I used this guy.
Gave me code in a few hours.
Click to expand...
Click to collapse
Hi, There does not seem to be any bloatware installed from any network....the phone does look like a bought unlocked phone. Maybe the owner has put a sim lock on the phone himself?
download the Samsung Info app from Play Store, it should tell you eveything you need to know(root wont unlock network)and no way the seller put a network lock, in terms of unlocking you'll need the code. Some service providers supply them at no fee and some at a fee, alternatively you have a plethora of online options usually at a small cost to provide code, gl.
Today, my partner gave me a old Huawei P8 he throw away somewhere time ago. I charged it and turned it on and everything seemed to be working fine. I plugged my SIM card in, and the device asked me for the pin, I wrote it down and everthing was ok. I got my 4G network working fine, my Wi-Fi, everything. The problem comes when I try to call someone, it just not working. I've been doing some research and yes, the device is IMEI locked. So, is it possible, in any way, to make it work again? I mean, to get rid of the IMEI lock?
Thanks!
Hej, I think you it should be possible to get the unlock code from the provider from where your partner get the mobile contact. Take a lock at the homepage of the provider and search for sim unlock. Normally it should be easy to get the unlock code for free